Research on the Control Strategy of Micro Wind-Hydrogen Coupled System Based on Wind Power Prediction and Hydrogen Storage System Charging/Discharging Regulation

This paper addresses the micro wind-hydrogen coupled system,aiming to improve the power tracking capability of micro wind farms,the regulation capability of hydrogen storage systems,and to mitigate the volatility of wind power generation.A predictive control strategy for the micro wind-hydrogen coupled system is proposed based on the ultra-short-term wind power prediction,the hydrogen storage state division interval,and the daily scheduled output of wind power generation.The control strategy maximizes the power tracking capability,the regulation capability of the hydrogen storage system,and the fluctuation of the joint output of the wind-hydrogen coupled system as the objective functions,and adaptively optimizes the control coefficients of the hydrogen storage interval and the output parameters of the system by the combined sigmoid function and particle swarm algorithm(sigmoid-PSO).Compared with the real-time control strategy,the proposed predictive control strategy can significantly improve the output tracking capability of the wind-hydrogen coupling system,minimize the gap between the actual output and the predicted output,significantly enhance the regulation capability of the hydrogen storage system,and mitigate the power output fluctuation of the wind-hydrogen integrated system,which has a broad practical application prospect.

不同方法对根管内氢氧化钙去除效果的micro-CT评价

目的:应用显微CT(micro-computed tomography,micro-CT)建立磨牙根管模型,评价不同方法对氢氧化钙的清除效率。方法:收集2023年10月—2024年2月口腔综合科门诊拔除的11颗磨牙(24个根管),按照标准根管治疗流程,镍钛器械预备完成后,在根管内置入氢氧化钙,1周后,根据不同冲洗方法将样本随机分为侧方开口注射器组、超声荡洗组(EMS组)和声波震荡组(EDDY组)等3组(n=8)。冲洗前后使用micro-CT重建根管系统并使用不同颜色标记独立根管,计算各个根管氢氧化钙体积,比较各组氢氧化钙清除率。采用SPSS 19.0软件包对数据进行统计学分析。结果:3种方法均无法完全去净根管内氢氧化钙。使用次氯酸钠作为冲洗液时,超声荡洗和声波震荡清除效果优于侧方开口冲洗器(P<0.05);超声荡洗和声波震荡去除氢氧化钙效率相当,差异无统计学意义(P>0.05);氢氧化钙残留部位集中于根尖区。结论:Micro-CT能较为高效地重建磨牙根管模型,可用于评价氢氧化钙去除效果。超声荡洗组和声波震荡组清除氢氧化钙效率相当,优于侧方开口注射器组。

Micro LED车灯投影光学系统设计与优化

本文提出了一种基于Micro LED阵列的车灯投影方案,设计了以像素尺寸为80μm×80μm的200×150白光Micro LED阵列作为显示光源,视场角为16°×34°的车灯投影光学系统,并对物面倾斜角度和光学系统结构进行了优化。此外,分别采用反向畸变处理方法和像素灰度调制方法用以解决车灯投影图像的梯形畸变和照度均匀性问题,并搭建了投影实验平台,对图像校正方法进行了验证。实验结果表明:校正后图像梯形畸变系数p1,p2分别从0.0932和0.3680下降至0.0835和0.0373,像面照度均匀性从83.2%提高到93.2%。本文通过对基于Micro LED的倾斜投影车灯光学系统进行优化设计及采用图像校正方法,实现了高光效、低畸变的车灯投影。

光子晶体Micro LED微显示阵列加工及光学特性分析

Micro LED器件具有高亮度、低功耗和高可靠性等优点,但Micro LED显示像素巨量转移和光提取效率低的问题为其应用带来挑战。开发了具有高转移效率和出光效率的单片64×64 Micro LED微显示阵列,提出了倒装型GaN基单片Micro LED微显示阵列芯片和Si基驱动电路的设计方法及集成工艺。通过时域有限差分(FDTD)方法对Micro LED微显示阵列光学特性进行了建模分析,设计了一种提高Micro LED微显示阵列出光效率的光提取结构。结合仿真结果,开发了一种在Micro LED蓝宝石衬底表面制备光子晶体结构的聚焦离子束(FIB)微纳加工工艺,并进行了器件加工。测试结果表明,蓝宝石衬底上加工的光子晶体结构可以提高Micro LED器件的表面出光效率,光功率平均值提升了16.36%,对Micro LED微显示阵列加工及微显示像素光提取问题具有借鉴意义。

Research on Infrared Emissivity and Laser Reflectivity of Sn_(1−x)Er_(x)O_(2)Micro/Nanofibers Based on First-Principles

Sn_(1−x)Er_(x)O_(2)(x=0%,8%,16%,24%)micro/nanofibers were prepared by electrospinning combined with heat treatment using erbium nitrate,stannous chloride and polyvinylpyrrolidone(PVP)as raw materials.The target products were characterized by thermogravimetric analyzer,X-ray diffrotometer,fourier transform infrared spectrometer,scanning electron microscope,spectrophotometer and infrared emissivity tester,and the effects of Er^(3+)doping on its infrared and laser emissivity were studied.At the same time,the Sn_(1−x)Er_(x)O_(2)(x=0%,16%)doping models were constructed based on the first principles of density functional theory,and the related optoelectronic properties such as their energy band structure,density of states,reflectivity and dielectric constant were analyzed,and further explained the mechanism of Er^(3+)doping on SnO_(2)infrared emissivity and laser absorption from the point of electronic structure.The results showed that after calcination at 600℃,single rutile type SnO_(2)was formed,and the crystal structure was not changed by doping Er^(3+).The calcined products showed good fiber morphology,and the average fiber diameter was 402 nm.The infrared emissivity and resistivity of the samples both decreased first and then increased with the increase of Er^(3+)doping amount.When x=16%,the infrared emis-sivity of the sample was at least 0.71;and Er^(3+)doping can effectively reduce the reflectivity of SnO_(2)at 1.06μm and 1.55μm,when x=16%,its reflectivity at 1.06μm and 1.55μm are 50.5%and 40%,respectively,when x=24%,the reflectivity at 1.06μm and 1.55μm wavelengths are 47.3%and 42.1%,respectively.At the same time,the change of carrier concentration and electron transition before and after Er^(3+)doping were described by first-principle calculation,and the regulation mechanism of infrared emissivity and laser reflectivity was explained.This study provides a certain experimental and theoretical basis for the development of a single-type,light-weight and easily prepared infrared and laser compatible-stealth material.

基于Micro CT的铜导线短路熔痕孔洞特征分析

导线短路是造成电气火灾的重要原因之一。现行国家标准中将导线短路熔痕分为起火前发生的一次短路熔痕和起火后造成的二次短路熔痕,然而现行国家标准中的鉴定仅停留在定性判断的阶段。火灾现场铜导线短路熔痕特征的量化分析研究是国内外研究人员主要关注的重点。本文应用Micro CT技术对铜导线短路熔痕进行断层扫描检测并重构铜导线短路熔痕的3D图像数据,在此基础上统计、归纳、总结铜导线短路熔痕内部孔洞形态及分布等孔洞特征。研究表明,Micro CT能够全面采集铜导线短路熔痕的整体形态和内部孔洞特征,一次短路熔痕与二次短路熔痕内部孔洞半径、表面积、紧密度的特征数据存在差别,可为短路熔痕定性和定量分析判据研究提供新的理论依据。

Genetically modified pigs:Emerging animal models for hereditary hearing loss

Hereditary hearing loss(HHL),a genetic disorder that impairs auditory function,significantly affects quality of life and incurs substantial economic losses for society.To investigate the underlying causes of HHL and evaluate therapeutic outcomes,appropriate animal models are necessary.Pigs have been extensively used as valuable large animal models in biomedical research.In this review,we highlight the advantages of pig models in terms of ear anatomy,inner ear morphology,and electrophysiological characteristics,as well as recent advancements in the development of distinct genetically modified porcine models of hearing loss.Additionally,we discuss the prospects,challenges,and recommendations regarding the use pig models in HHL research.Overall,this review provides insights and perspectives for future studies on HHL using porcine models.

Micro-CT分析跟骨内骨小梁分布及结构特征

背景:跟骨位于足的后下部,受力较大。跟骨外形复杂且不规则,外周有较薄的皮质骨包绕,内部充满大量的骨小梁,探讨骨小梁的微观结构、走行及分布特征有助于提高对跟骨骨折的认识。目的:采用微计算机断层扫描仪(Micro-CT)扫描跟骨标本获得其影像资料,对其内部骨小梁结构进行分析,探讨跟骨内骨小梁的形态、分布及结构特征。方法:采用Micro-CT连续扫描干燥成人跟骨标本,扫描后获得影像图像,将其以DICOM格式存储。导入影像资料到Hiscan Analyzer软件,显示清晰完整的成人跟骨矢状面、冠状面、水平面的图像,逐层观察骨小梁的走行,依据骨小梁走行特点将跟骨矢状面分为6个部分,在以7 mm为标准的相同厚度下,每个部分选择1个49 mm2等面积的兴趣区,三维重建后获得跟骨及骨小梁的立体微观结构,二值化后运用软件计算感兴趣区域内骨小梁的体积分数、表面密度、骨小梁厚度、骨小梁间隙和骨小梁数量参数。结果与结论:①跟骨表面皮质层很薄,内部充满大量骨松质,在Gissane角的骨皮质明显增厚;②跟骨上部的骨小梁体积分数大于跟骨下部前端、中和三角区、跟骨下后部、跟骨结节部、跟骨底部,跟骨结节部的骨小梁体积分数大于跟骨下部前端、中和三角区、跟骨下后部、跟骨底部;跟骨结节部的骨小梁表面密度大于跟骨下部前端、中和三角区、跟骨底部,跟骨上部、跟骨下后部的骨小梁表面密度大于中和三角区;跟骨上部的骨小梁厚度大于跟骨结节部;中和三角区的骨小梁间隙大于跟骨上部、跟骨结节部;跟骨结节部的骨小梁数量大于中和三角区;③中和三角区主要分布杆状骨小梁,骨小梁表面密度最小、体积分数较小、骨小梁间隙最大;该部位骨质较疏松,受到高冲击力时抗压缩能力差,骨小梁最先发生断裂,是易发生骨折的部位。

Micro segment analysis of supercritical methane thermal-hydraulic performance and pseudo-boiling in a PCHE straight channel

The printed circuit heat exchanger(PCHE) is receiving wide attention as a new kind of compact heat exchanger and is considered as a promising vaporizer in the LNG process. In this paper, a PCHE straight channel in the length of 500 mm is established, with a semicircular cross section in a diameter of 1.2 mm.Numerical simulation is employed to investigate the flow and heat transfer performance of supercritical methane in the channel. The pseudo-boiling theory is adopted and the liquid-like, two-phase-like, and vapor-like regimes are divided for supercritical methane to analyze the heat transfer and flow features.The results are presented in micro segment to show the local convective heat transfer coefficient and pressure drop. It shows that the convective heat transfer coefficient in segments along the channel has a significant peak feature near the pseudo-critical point and a heat transfer deterioration when the average fluid temperature in the segment is higher than the pseudo-critical point. The reason is explained with the generation of vapor-like film near the channel wall that the peak feature related to a nucleateboiling-like state and heat transfer deterioration related to a film-boiling-like state. The effects of parameters, including mass flow rate, pressure, and wall heat flux on flow and heat transfer were analyzed.In calculating of the averaged heat transfer coefficient of the whole channel, the traditional method shows significant deviation and the micro segment weighted average method is adopted. The pressure drop can mainly be affected by the mass flux and pressure and little affected by the wall heat flux. The peak of the convective heat transfer coefficient can only form at high mass flux, low wall heat flux, and near critical pressure, in which condition the nucleate-boiling-like state is easier to appear. Moreover,heat transfer deterioration will always appear, since the supercritical flow will finally develop into a filmboiling-like state. So heat transfer deterioration should be taken seriously in the design and safe operation of vaporizer PCHE. The study of this work clarified the local heat transfer and flow feature of supercritical methane in microchannel and contributed to the deep understanding of supercritical methane flow of the vaporization process in PCHE.

Advances in microfluidic-based DNA methylation analysis

DNA methylation has been extensively investigated in recent years,not least because of its known relationship with various diseases.Progress in analytical methods can greatly increase the relevance of DNA methylation studies to both clinical medicine and scientific research.Microflu-idic chips are excellent carriers for molecular analysis,and their use can provide improvements from multiple aspects.On-chip molecular analysis has received extensive attention owing to its advantages of portability,high throughput,low cost,and high efficiency.In recent years,the use of novel microfluidic chips for DNA methylation analysis has been widely reported and has shown obvious superiority to conventional methods.In this review,wefirst focus on DNA methylation and its applications.Then,we discuss advanced microfluidic-based methods for DNA methylation analysis and describe the great progress that has been made in recent years.Finally,we summarize the advantages that microfluidic technology brings to DNA methylation analysis and describe several challenges and perspectives for on-chip DNA methylation analysis.This review should help researchers improve their understanding and make progress in developing microfluidic-based methods for DNA methylation analysis.

高亮绿光氮化镓基Micro-LED微型显示器制备

Micro-LED作为一种新型的显示技术,具有对比度高、响应快及寿命长等优点,已成为当前研究的热点。然而,尽管潜力巨大,Micro-LED技术的商业化之路仍面临诸多技术上的挑战与瓶颈。本文旨在探讨高亮绿光氮化镓基Micro-LED微型显示器的制备过程及其相关技术。基于WVGA041全数字信号电路CMOS硅基驱动电路,制作了0.41 inch、分辨率为800×480的主动式单色绿光Micro-LED微型显示器。利用高精度倒装焊接技术实现了CMOS驱动电路与LED发光芯片的电气连接。结果表明,制备出LED显示芯片正常启亮电压为2.8V,EL光谱峰值波长524nm;在硅基CMOS电路驱动范围内,Micro-LED微型显示器在5V电压下,器件亮度为108000cd/m^(2)(最大亮度可达250000 cd/m^(2)),电流密度达到0.61A/cm^(2)时色坐标为(0.175,0.756)。当电流密度从0.3A/cm^(2)增加到1.3A/cm^(2)时,色坐标从(0.178,0.757)变化到(0.175,0.746),器件的色稳定性能够满足实际应用要求。

基于EAR算法的司机疲劳驾驶检测系统

为有效减少司机疲劳驾驶导致的交通事故发生率,设计了一套基于EAR算法的司机疲劳驾驶检测系统。系统由硬件和软件两部分构成。硬件部分包括STM32单片机、OLED12864液晶显示模块、DS18B20温度传感器模块、光电测速传感器模块、CN-TTS语音播报模块、ESP8266数据存储和传输模块以及K210人脸识别模块。软件部分采用EAR检测算法进行疲劳检测。通过单片机和手机上运行的APP双端监测,系统能够实时监测司机状态,在司机出现疲劳特征时发出提醒,从而有效避免疲劳驾驶带来的安全隐患。经测试,系统的综合准确率达到92.4%,能够有效提醒司机避免疲劳驾驶。

Micro RNAs与急性心肌梗死关系的研究进展

急性心肌梗死(acute myocardial infarction,AMI)是冠状动脉疾病最严重的表现,其引起的心肌组织损伤可促进心力衰竭的发展。尽管近些年由于生活方式的改变、治疗方式(如经皮冠状动脉介入治疗)的发展使AMI的预后得到了改善,但是AMI依旧每年危害着全球700多万人的身心健康,AMI仍然是世界范围内高发病率和高死亡率的主要疾病之一[1]。微小RNA(micro RNAs,miRNAs)是在20世纪90年代被发现的,mi RNAs的研究已经迅速发展成为一个成熟而广阔的领域。mi RNAs存在于几乎所有类型的细胞和细胞的病理生理活动中,包括与心血管系统相关的细胞。本文将mi RNAs对AMI病理生理进程的影响进行综述,希望为临床治疗提供新思路。

Review of 6 Years of Middle Ear Surgery in the ENT-Laryngology Department of the Donka National Hospital and a Literature Review

Introduction: Middle ear surgery is increasingly performed in our department. Our goal was to take stock of this activity in the ENT department of the Donka National Hospital. Equipment and Methods: It was a descriptive and retrospective study;it involved 71 patients’ records operated from January 1, 2018 to December 31, 2023. We included the files of patients who had a middle ear surgery including the post-operative report and follow-up. Incomplete or illegible records were excluded. The parameters studied were epidemiological, otoscopic, tomodensitometric, surgical indications, surgical techniques and results. Results: We recorded 71 middle ear surgeries out of 548 ENT surgeries, the prevalence was 12.96%. The average age was 23 years (type-deviation = 17, 29 years) with extremes of 3 to 75 years. According to the preoperative audiometry, the deafness was medium (48.8%), mild (36.9%) and severe (14.3%). The operative indications were among others: perforation of the tympanic sequellar (52.5%), chronic otomastoiditis (23.8%), cholesteatoma (15%) and seromuqueous otitis (8.7%). We performed 70 tympanoplasties (90.9%), 50 mastoidectomies (64.9%) and 7 trans-tympanic aerators (9.1%). One month after surgery, the neotympanum was constituted in 86%, and the hearing gain was between 11 and 15 dB in 18.3% of cases. Conclusion: Middle ear surgery was infrequent. Young subjects are the most concerned. Tympanoplasty and mastoidectomy are the main surgical techniques. The anatomical and functional results are appreciable.

Evaluation of Ear and Facial Indices of Ibibio and Efik Female Children of Akwa Ibom and Cross River States, Nigeria

Background: The ear and face are indispensable and distinctive features for hearing and identification. Objectives: This study was designed to generate anthropometric data of the ear and facial indices of females of Efik and Ibibio children in Cross River and Akwa Ibom States, show morphological and aesthetic differences and ethnicity. Methods: A total of 600 female children (300 Efiks and 300 Ibibios) aged 2 to 10 years that met the inclusion criteria were chosen from selected primary schools in Calabar Municipality, Calabar South of Cross River State and from Uyo, Itu of Akwa Ibom State, Nigeria. Standardized measurements of face length, face width, ear length, and ear width were taken with a spreading caliper;the facial (proscopic) and ear (auricular) indices were determined. Results: Efik subjects presented a mean face length of 8.36 ± 0.06 cm, face width of 11.04 ± 0.04 cm, ear length of 4.92 ± 0.02 cm, and ear width of 3.06 ± 0.01 cm. Ibibio subjects had mean values for face length, face width, ear length, and ear width as 8.17 ± 0.05 cm, 10.75 ± 0.05 cm, 4.77 ± 0.03 cm, and 2.94 ± 0.02 cm respectively. The mean facial index and ear index for Efik subjects were 75.68 ± 0.31 and 62.16 ± 0.27 respectively;while the mean facial and ear indices for Ibibio subjects were 74.79 ± 0.36 and 61.80 ± 0.34 respectively. Statistical analysis demonstrated significant differences in face length, ear length, ear width and facial index, with the Efik subjects having higher values than Ibibio subjects (p Conclusion: The results showed hypereuryproscopic face as the prevalent face type among females of both ethnic groups, therefore can be of importance in sex, ethnic, and racial differentiation, and in clinical practice, aesthetics and forensic medicine.

基于量子点@有序介孔复合材料的Micro⁃LED色转换特性

量子点(Quantum dots)由于具有优异的光电特性,广泛应用于发光与显示、太阳能电池、光催化等领域,它的发现和合成获得了2023年诺贝尔化学奖。采用量子点色转换的Micro-LED全彩化显示技术无需巨量转移,有望实现大规模量产,然而,量子点在高强度Micro-LED出光激发下的性能和寿命仍存在局限。基于此,本文研究了基于量子点@有序介孔(QDs@SBA-15)复合材料的Micro-LED色转换技术及其特性,有序介孔分子筛载体独特的孔道结构不仅能够有效提升Micro-LED色转换和光提取效率,且致密的有序介孔材料也一定程度上保障了量子点的稳定性。首先,通过时域有限差分方法(FDTD)建立了Micro-LED仿真模型,探究量子点粒径和有序介孔材料的孔径对光提取效率的影响;基于仿真结果指导,进一步采用物理共混法制备了QDs@SBA-15复合材料,通过透射光谱、荧光激发光谱、紫外-可见光吸收谱等手段对其进行表征并确定浓度配比;最后,将该复合材料与聚二甲基硅氧烷(PDMS)混合固化成膜,并研究了其光致发光性能。实验结果发现,量子点粒径和介孔材料孔径的匹配度以及量子点和有序介孔材料的比例浓度是影响QDs@SBA-15复合材料发光效率及Micro-LED色转换性能的关键因素;通过优化,所得复合材料可获得优异的发光性能以及良好的环境稳定性,相比于纯量子点色转换层,复合材料的光提取效率提升了81.73%,复合材料的环境稳定性提升了14.33%,以Micro-LED作为蓝光光源组成的三基色发光器件工作色域达到了104.52%NTSC。本研究为量子点色转换Micro-LED显示技术提供了理论指导,为实现Micro-LED全彩化开辟了新路径。

Lugol's iodine增强Micro-CT成像评估口腔鳞状细胞癌切缘状态的研究

目的:本研究拟使用Lugol's iodine增强Micro-CT成像三维评估口腔鳞状细胞癌(oral squamous cell carcinoma,OSCC)切缘状态。方法:本研究共收集68例人OSCC组织样本,所有样本经3%Lugol's iodine染色12 h后行Micro-CT扫描(层厚为50μm)。随后将经Lugol's iodine染色后的样品行常规苏木精-伊红(hematoxylin-eosin,HE)染色切片(厚度为4μm),制作数字化病理切片。分别测量影像图像和病理图像的黏膜切缘(mucosal margin,MM)和深部切缘(deep margin,DM)。结果:Lugol's iodine增强Micro-CT成像可以在三维空间中清晰区分肿瘤边界,且Micro-CT成像相较于二维病理切片,可以更准确地测量MM和DM,发现阳性切缘及临界切缘。结论:Lugol's iodine增强Micro-CT成像可以全面评估OSCC切缘,提供更全面、更清晰的肿瘤边缘信息,指导临床治疗方案选择和预后评估。

The environment,especially the minimum temperature,affects summer maize grain yield by regulating ear differentiation and grain development

Ear differentiation,grain development and their interaction with factors in the growing environment,such as temperature,solar radiation and precipitation,greatly influence grain number and grain weight,and ultimately affect summer maize production.In this study,field experiments involving different sowing dates were conducted over three years to evaluate the effects of temperature factors,average solar radiation and total precipitation on the growth process,ear differentiation,fertilization characteristics,grain filling and yield of summer maize varieties with different growth durations.Four hybrids were evaluated in Huang-Huai-Hai Plain(HHHP),China from 2018 to 2020 with five different sowing dates.The results showed that the grain yield formation of summer maize was strongly impacted by the environment from the silking(R1)to milking(R3)stage.Average minimum temperature(AT_(min))was the key environmental factor that determined yield.Reductions in the length of the growing season(r=–0.556,P<0.01)and the total floret number on ear(R^(2)=0.200,P<0.001)were found when AT_(min) was elevated from the emerging(VE)to R1 stage.Both grain-filling rate(R^(2)=0.520,P<0.001)and the floret abortion rate on ear(R^(2)=0.437,P<0.001)showed quadratic relationships with AT_(min) from the R1 to physiological maturity(R6)stage,while the number of days after the R1 stage(r=–0.756,P<0.01)was negatively correlated with AT_(min).An increase in AT_(min) was beneficial for the promotion of yield when it did not exceeded a certain level(above 23°C during the R1–R3 stage and 20–21°C during the R1-R6 stage).Enhanced solar radiation and precipitation during R1–R6 increased the grain-filling rate(R^(2)=0.562,P<0.001 and R^(2)=0.229,P<0.05,respectively).Compared with short-season hybrids,full-season hybrids showed much greater suitability for a critical environment.The coordinated regulation of AT_(min),ear differentiation and grain development at the pre-and post-silking stages improved maize yield by increasing total floret number and grain-filling rate,and by reducing the floret abortion rate on ear.

Flexible planar micro supercapacitor diode

Supercapacitor diode is a novel ion device that performs both supercapacitor energy storage and ion diode rectification functions.However,previously reported devices are limited by their large size and complex processes.In this work,we demonstrate a screen-printed micro supercapacitor diode(MCAPode)that based on the insertion of a finger mode with spinel ZnCo_(2)O_(4) as cathode and activated carbon as anode for the first time,and featuring an excellent area specific capacitance(1.21 mF cm^(-2)at 10 mV s^(-1))and high rectification characteristics(rectification ratioⅠof 11.99 at 40 mV s^(-1)).Taking advantage of the ionic gel electrolyte,which provides excellent stability during repeated flexing and at high temperatures.In addition,MCAPode exhibits excellent electrochemical performance and rectification capability in"AND"and"OR"logic gates.These findings provide practical solutions for future expansion of micro supercapacitor diode applications.

Squamous Cell Carcinoma of the Middle Ear: Case Report and Literature Review

Malignant tumors originating from the middle ear are rare. The literature identifies chronic inflammation and Human Papillomavirus (HPV) infection as the most common risk factors. A CT scan to assess bony invasion and an MRI to evaluate soft tissue involvement, depth of invasion, and perineural invasion, followed by a biopsy, are indispensable for diagnosis and treatment. There is no standard treatment for squamous cell carcinoma of the middle ear, however, most reported cases are treated with surgical resection followed by postoperative radiotherapy. Given the challenges of achieving complete surgical excision, radiotherapy plays a crucial role in controlling middle ear cancers, as demonstrated in our case. We present a case of squamous cell carcinoma of the middle ear in a 63-year-old female with a history of chronic suppurative otitis media. The patient underwent a right subtotal petrosectomy without lymph node dissection followed by concurrent chemoradiotherapy. At the one-year follow visit, no recurrence or metastasis was detected.