Laboratory swelling deformation tests were carried out on compacted GMZ bentonite and bentonite-sand mixtures with 30%and 50%sand contents at 20,40,60,80 and 90°C with infiltration of distilled water.Influence of...Laboratory swelling deformation tests were carried out on compacted GMZ bentonite and bentonite-sand mixtures with 30%and 50%sand contents at 20,40,60,80 and 90°C with infiltration of distilled water.Influence of temperature,initial dry density,and quartz sand content on the swelling deformation characteristic of compacted bentonite specimens was analyzed.Results indicate that the swelling deformation process is accelerated,and the maximum swelling strain increases with the increase in temperature,while the maximum swelling strain tends to be stable with increasing temperature.In the meantime,the temperature effects depend on both of the sand content and the initial dry density of the specimens,the increases of the maximum swelling strain induced by increasing temperature,are enlarged by increasing sand content or initial dry density.Adding of quartz sand to bentonite not only influences the integrality of bentonite specimen,but also increase the microfissuring in area on quartz sand,which are advantageous to the heat transfer,leading to the increase of swelling deformation capacity of the specimen.The increased dry density relatively increases the bentonite content,so the swelling property is enhanced.However,no change on mineral composition of bentonite was observed when temperature was changed from 20 to 90°C.展开更多
高放废物地质处置库缓冲/回填材料的重要作用之一是传导和散失高放废物衰变热,在膨润土中添加石英砂、石墨、花岗岩岩屑等导热性能较好的添加剂是提高缓冲/回填材料导热性能的主要方法。选用北山花岗岩岩屑为添加剂,与高庙子钠基膨润土G...高放废物地质处置库缓冲/回填材料的重要作用之一是传导和散失高放废物衰变热,在膨润土中添加石英砂、石墨、花岗岩岩屑等导热性能较好的添加剂是提高缓冲/回填材料导热性能的主要方法。选用北山花岗岩岩屑为添加剂,与高庙子钠基膨润土GMZ01组成混合材料,制备不同含水率、不同密度的试样。使用Hot Disk TPS2500s热常数分析仪测定样品的导热系数,分析其与花岗岩岩屑含量、干密度、饱和度等参数的关系,并运用多种混合物热传导模型分析预测导热系数。研究结果表明,花岗岩岩屑能够有效提高缓冲/回填材料的导热性能,混合材料的导热系数分别与其饱和度、气体体积存在线性关系;Maxwell方程能够较好预测北山花岗岩岩屑-膨润土混合材料的导热系数。展开更多
在土水特征测定试验的基础上,分析了历史上提出的各种模拟土水特征曲线的方程与试验结果的拟合程度。在非饱和渗透系数试验结果的基础上,分析了由分维理论得到的非饱和渗透系数模拟方程与试验结果的拟合程度。得出以下结论:Fredlund and...在土水特征测定试验的基础上,分析了历史上提出的各种模拟土水特征曲线的方程与试验结果的拟合程度。在非饱和渗透系数试验结果的基础上,分析了由分维理论得到的非饱和渗透系数模拟方程与试验结果的拟合程度。得出以下结论:Fredlund and Xing土水特征曲线方程对于试验结果有较好的模拟效果;Brooks和Corey土水特征曲线方程与试验结果的曲线形状更为接近,但在模拟接近309MPa的吸力段的土水曲线时与试验结果有偏差。分维理论的修正公式能更好模拟非饱和渗透系数。展开更多
基金Project (41402260) supported by the National Natural Science Foundation of ChinaProject (20136101120006) supported by the Research Fund for the Doctoral Program of Higher Education,China
文摘Laboratory swelling deformation tests were carried out on compacted GMZ bentonite and bentonite-sand mixtures with 30%and 50%sand contents at 20,40,60,80 and 90°C with infiltration of distilled water.Influence of temperature,initial dry density,and quartz sand content on the swelling deformation characteristic of compacted bentonite specimens was analyzed.Results indicate that the swelling deformation process is accelerated,and the maximum swelling strain increases with the increase in temperature,while the maximum swelling strain tends to be stable with increasing temperature.In the meantime,the temperature effects depend on both of the sand content and the initial dry density of the specimens,the increases of the maximum swelling strain induced by increasing temperature,are enlarged by increasing sand content or initial dry density.Adding of quartz sand to bentonite not only influences the integrality of bentonite specimen,but also increase the microfissuring in area on quartz sand,which are advantageous to the heat transfer,leading to the increase of swelling deformation capacity of the specimen.The increased dry density relatively increases the bentonite content,so the swelling property is enhanced.However,no change on mineral composition of bentonite was observed when temperature was changed from 20 to 90°C.
文摘高放废物地质处置库缓冲/回填材料的重要作用之一是传导和散失高放废物衰变热,在膨润土中添加石英砂、石墨、花岗岩岩屑等导热性能较好的添加剂是提高缓冲/回填材料导热性能的主要方法。选用北山花岗岩岩屑为添加剂,与高庙子钠基膨润土GMZ01组成混合材料,制备不同含水率、不同密度的试样。使用Hot Disk TPS2500s热常数分析仪测定样品的导热系数,分析其与花岗岩岩屑含量、干密度、饱和度等参数的关系,并运用多种混合物热传导模型分析预测导热系数。研究结果表明,花岗岩岩屑能够有效提高缓冲/回填材料的导热性能,混合材料的导热系数分别与其饱和度、气体体积存在线性关系;Maxwell方程能够较好预测北山花岗岩岩屑-膨润土混合材料的导热系数。
文摘在土水特征测定试验的基础上,分析了历史上提出的各种模拟土水特征曲线的方程与试验结果的拟合程度。在非饱和渗透系数试验结果的基础上,分析了由分维理论得到的非饱和渗透系数模拟方程与试验结果的拟合程度。得出以下结论:Fredlund and Xing土水特征曲线方程对于试验结果有较好的模拟效果;Brooks和Corey土水特征曲线方程与试验结果的曲线形状更为接近,但在模拟接近309MPa的吸力段的土水曲线时与试验结果有偏差。分维理论的修正公式能更好模拟非饱和渗透系数。
