The increasing demands on safety, emission and fuel consumption require more accurate control models of micro internal combustion swing engine （MICSE）. The objective of this paper is to investigate the constant spee...The increasing demands on safety, emission and fuel consumption require more accurate control models of micro internal combustion swing engine （MICSE）. The objective of this paper is to investigate the constant speed control models of four-stroke MICSE The operation principle of the four-stroke MICSE is presented based on the description of MICSE prototype. A two-level Petri net based hybrid mode/ is proposed to mode/ the four-stroke MICSE engine cycle. The Petri net subsystem at the upper level controls and synchronizes the four Petri net subsystems at the lower level. The continuous sub-models, including breathing dynamics of intake manifold, thermodynamics of the chamber and dynamics of the torque generation, are investigated and integrated with the discrete model in MATLAB Simulink. Through the comparison of experimental data and simulated DC voltage output, it is demonstrated that the hybrid model is valid for the four-stroke MICSE system. A nonlinear model is obtained from the cycle average data via the regression method, and it is linearized around a given nominal equilibrium point for the controller design. The feedback controller of the spark timing and valve duration timing is designed with a sequential loop closing design approach. The simulation of the sequential loop closure control design applied to the hybrid model is implemented in MATLAB. The simulation results show that the system is able to reach its desired operating point within 0.2 s, and the designed controller shows good MICSE engine performance with a constant speed. This paper presents the constant speed control models of four-stroke MICSE and carries out the simulation tests, the models and the simulation results can be used for further study on the precision control of four-stroke MICSE.展开更多
Two Klebsiella pneumoniae isolates （Kpcl and Kpc2） were obtained from liver samples of seven dead chickens and identified with Vitek-32 automated identification system. Antimicrobial susceptibilities were determined...Two Klebsiella pneumoniae isolates （Kpcl and Kpc2） were obtained from liver samples of seven dead chickens and identified with Vitek-32 automated identification system. Antimicrobial susceptibilities were determined by the microdilution broth method. Detection of genes encoding class A β-lactamases was performed by PCR amplification, and cloning of the ESBL gene was by plasmid restriction and fragments ligation. Conjugation assay, transformation experiments and plasmid profile analysis were performed. The incompatibility group of ESBL-carrying plasmid was determined by the PCR-based replicon typing method. Lastly, the genetic environment was analysed by direct sequencing of the DNA surrounding the ESBL gene. The genes associated with tetracycline and gentamicin resistance were also sought by PCR. The results revealed that the ESBL phenotype-negative strain Kpc2 only showed resistance to ampicillin, amoxicillin, tetracycline, and doxycycline and carried bla TEM-1 and tet（A） genes. The ESBL-producing strain Kpcl exhibited multidrug resistant phenotype and harbored bla TEM-1 , bla CTX-M-14, tet（A）, tet（B）, and rmtB genes. K. pneumoniae Kpcl contained four plasmids with molecular sizes of approximately 59, 6.9, 2.8, and 1.6 kb, but only a 59-kb plasmid, carried bla TEM-1 and blac CTM-14 genes, was observed in its transconjugant. The incompatibility group of plasmid carrying blaCTX-M-14 gene could not be determined. The bla CTX-M-14 gene was flanked upstream by an ISEcpl insertion sequence and downstream by an IS903 element. This work shows that CTX-M-14 is present in K. pneumoniae isolates from chickens in China. The bla CTX -M-4 gene was associated with an upstream ISEcpl insertion sequence. Our results underline the need for continuous surveillance of the prevalence and evolution of this CTX-M-type β-lactamase in China.展开更多
基金Supported by National Natural Science Foundation of China(Grant No.51475422)Science Fund for Creative Research Groups of National Natural Science Foundation of China(Grant No.51221004)
文摘The increasing demands on safety, emission and fuel consumption require more accurate control models of micro internal combustion swing engine （MICSE）. The objective of this paper is to investigate the constant speed control models of four-stroke MICSE The operation principle of the four-stroke MICSE is presented based on the description of MICSE prototype. A two-level Petri net based hybrid mode/ is proposed to mode/ the four-stroke MICSE engine cycle. The Petri net subsystem at the upper level controls and synchronizes the four Petri net subsystems at the lower level. The continuous sub-models, including breathing dynamics of intake manifold, thermodynamics of the chamber and dynamics of the torque generation, are investigated and integrated with the discrete model in MATLAB Simulink. Through the comparison of experimental data and simulated DC voltage output, it is demonstrated that the hybrid model is valid for the four-stroke MICSE system. A nonlinear model is obtained from the cycle average data via the regression method, and it is linearized around a given nominal equilibrium point for the controller design. The feedback controller of the spark timing and valve duration timing is designed with a sequential loop closing design approach. The simulation of the sequential loop closure control design applied to the hybrid model is implemented in MATLAB. The simulation results show that the system is able to reach its desired operating point within 0.2 s, and the designed controller shows good MICSE engine performance with a constant speed. This paper presents the constant speed control models of four-stroke MICSE and carries out the simulation tests, the models and the simulation results can be used for further study on the precision control of four-stroke MICSE.
基金funded by the National Natural Science Foundation of China (31072170)
文摘Two Klebsiella pneumoniae isolates （Kpcl and Kpc2） were obtained from liver samples of seven dead chickens and identified with Vitek-32 automated identification system. Antimicrobial susceptibilities were determined by the microdilution broth method. Detection of genes encoding class A β-lactamases was performed by PCR amplification, and cloning of the ESBL gene was by plasmid restriction and fragments ligation. Conjugation assay, transformation experiments and plasmid profile analysis were performed. The incompatibility group of ESBL-carrying plasmid was determined by the PCR-based replicon typing method. Lastly, the genetic environment was analysed by direct sequencing of the DNA surrounding the ESBL gene. The genes associated with tetracycline and gentamicin resistance were also sought by PCR. The results revealed that the ESBL phenotype-negative strain Kpc2 only showed resistance to ampicillin, amoxicillin, tetracycline, and doxycycline and carried bla TEM-1 and tet（A） genes. The ESBL-producing strain Kpcl exhibited multidrug resistant phenotype and harbored bla TEM-1 , bla CTX-M-14, tet（A）, tet（B）, and rmtB genes. K. pneumoniae Kpcl contained four plasmids with molecular sizes of approximately 59, 6.9, 2.8, and 1.6 kb, but only a 59-kb plasmid, carried bla TEM-1 and blac CTM-14 genes, was observed in its transconjugant. The incompatibility group of plasmid carrying blaCTX-M-14 gene could not be determined. The bla CTX-M-14 gene was flanked upstream by an ISEcpl insertion sequence and downstream by an IS903 element. This work shows that CTX-M-14 is present in K. pneumoniae isolates from chickens in China. The bla CTX -M-4 gene was associated with an upstream ISEcpl insertion sequence. Our results underline the need for continuous surveillance of the prevalence and evolution of this CTX-M-type β-lactamase in China.
