0.6μm CMOS Laser Diode Driver for Optical Access Networks

Using native CMOS technology,EDA tool,and adopting full-custom design methodology,a laser diode driver for the use of STM-1 and STM-4 optical access network,is realized by CSMC-HJ 0.6μm CMOS technology to modulate laser diodes at 155Mb/s (STM-1),622Mb/s (STM-4) with adjustable modulation current from 0 to 50mA for an equivalent 50Ω load.The maximum modulation voltage is over 2.5V pp corresponding to a 3V DC bias for output stage.The time range of rise and fall from 360ps to 471ps is measured from the output voltage pulse.The RMS jitter is no more than 30ps for four bit rates.The power consumption is less than 410mW under a power supply voltage of 5V.According to the experimental results,the laser diode driver achieves the same level as their counterparts worldwide.

The Application of Optical CDMA-Based Fiber Radio Networks in Wireless Sensor Networks

One fiber radio scheme using shifted prime codes for interference elimination is proposed for optical code-division multiple-access (OCDMA) network. By taking advantage of the cyclic property of the shifted prime codes in the same code groups, the proposed compact decoder is low cost and suitable to be used in the task manager node in the applications of wireless sensor networks. The performance comparison for sev-eral OCDMA-based fiber radio networks is also given to clarify the advantage of the proposed one.

A survey of free space optical networks

Free Space Optical （FSO） networks, also known as optical wireless networks, have emerged as viable candidates for broadband wireless communications in the near future. The range of the potential application of FSO networks is extensive, from home to satellite. However, FSO networks have not been popularized because of insufficient availability and reliability. Researchers have focused on the problems in the physical layer in order to exploit the properties of wireless optical channels. However, recent technological developments with successful results make it practical to explore the advantages of the high bandwidth. Some researchers have begun to focus on the problems of network and upper layers in FSO networks. In this survey, we classify prospective global FSO networks into three subnetworks and give an account of them. We also present state-of- the-art research and discuss what kinds of challenges exist.

Implementation of access controller for Ethernet passive optical network

This paper presents the design and implementation of access controller used for Ethernet passive optical network （ EPON）. As a first step to develop an ASIC product, the entire system is designed on a field programmable gate array （FPGA） with an embedded CPU. To reduce working frequency of the FPGA, the byte-to-word conversion is proposed. Propagation delays are equalized by ranging procedure so as to avoid data collision. Implementations of synchronization, classification, as well as Linux porting are illustrated in detail. The interface between the FPGA and CPU are also presented. Experimental results show that the proposed system can properly function in a relatively low cost FPGA.

An Offloading Scheme Leveraging on Neighboring Node Resources for Edge Computing over Fiber-Wireless (FiWi) Access Networks

The computation resources at a single node in Edge Computing(EC)are commonly limited,which cannot execute large scale computation tasks.To face the challenge,an Offloading scheme leveraging on NEighboring node Resources(ONER)for EC over Fiber-Wireless(FiWi)access networks is proposed in this paper.In the ONER scheme,the FiWi network connects edge computing nodes with fiber and converges wireless and fiber connections seamlessly,so that it can support the offloading transmission with low delay and wide bandwidth.Based on the ONER scheme supported by FiWi networks,computation tasks can be offloaded to edge computing nodes in a wider range of area without increasing wireless hops(e.g.,just one wireless hop),which achieves low delay.Additionally,an efficient Computation Resource Scheduling(CRS)algorithm based on the ONER scheme is also proposed to make offloading decision.The results show that more offloading requests can be satisfied and the average completion time of computation tasks decreases significantly with the ONER scheme and the CRS algorithm.Therefore,the ONER scheme and the CRS algorithm can schedule computation resources at neighboring edge computing nodes for offloading to meet the challenge of large scale computation tasks.

Higher Speed Passive Optical Networks for Low Latency Services

Latency sensitive services have attracted much attention lately and imposedstringent requirements on the access network design. Passive optical networks (PONs) providea potential long-term solution for the underlying transport network supporting theseservices. This paper discusses latency limitations in PON and recent progress in PONstandardization to improve latency. Experimental results of a low latency PON system arepresented as a proof of concept.

Next Generation Optical Access Network Using CWDM Technology

We are developing a novel technology for the next generation optical access network. The proposed archi-tecture provides FTTX high bandwidth which enables to give out 10Gbit/s per end-user. Increasing the subscribers in the future will cause massive congestion in the data transferred along the optical network. Our solution is using the wavelength division multiplexing PON (CWDM-PON) technology to achieve high bandwidth and enormous data transmission at the network access. Physical layer modifications are used in our model to provide satisfactory solution for the bandwidth needs. Thus high data rates can be achieved throughout the network using low cost technologies. Framework estimations are evaluated to prove the intended model success and reliability. Our argument that: this modification will submit a wide bandwidth suitable for the future Internet.

Cost Effective Scheme for OLT in Next Generation Passive Optical Access Network Based on Noise Free Optical Multi Carrier

We propos e a cos t-effective multi-carrier generation technique which minimizes the passive optical access network(PON) costs. In this study replacement of laser array with multi-carrier source at optical line terminal(OLT) side in PON is addressed. With 25-GHz frequency spacing, the generated optical multi-carriers exhibit good tone to noise ratio(TNR) i. e. above 20 d B, and least amplitude difference i. e. 1.5d B. At the OLT, multi-carriers signal based multiplexed differential phase shift keying(DPSK) data from all the channels each having 10 Gbps for downlink is transmitted through 25 km single mode fiber. While the transmitted information is retrieved at optical network unit(ONU), part of the downlink signal is re-modulated using intensity modulated(IM) on-off keying(OOK) for upstream transmission at 10-Gbps. Simulation results are in good agreement with the theoretical analysis, showing error free transmission in downlink and uplink with 10 Gbps symmetric data rate at each channel. The receivedpower, both for uplink and downlink transmission, is adequate for all channels at BER of 10-9 with minimum power penalties. Power budget is calculated for different splitting ratios showing excellent system margins for any unseen losses. The proposed setup provides a cost-effective way minimizing transmission losses, and providing greater system's margin in PON architecture.

Application of the Spectrum Peak Positioning Technology Based on BP Neural Network in Demodulation of Cavity Length of EFPI Fiber Optical Sensor

An Extrinsic Fabry-Perot Interferometric (EFPI) fiber optical sensor system is an online testing system for the gas density. The system achieves the measurement of gas density information mainly by demodulating the cavity length of EF- PI fiber optical sensor. There are many ways to achieve the demodulation of the cavity length. For shortcomings of the big intensity demodulation error and complex structure of phase demodulation, this paper proposes that BP neural net-work is used to locate the special peak points in normalized interference spectrum and combining the advantages of the unimodal and bimodal measurement achieves the demodulation of the cavity length. Through online simulation and actual measurement, the results show that the peak positioning technology based on BP neural network can not only achieve high-precision demodulation of the cavity length, but also achieve an absolute measurement of cavity length in large dynamic range.

A Novel Packet Switch Node Architecture for Contention Resolution in Synchronous Optical Packet Switched Networks

Packet contention is a key issue in optical packet switch (OPS) networks and finds a viable solution by including optical buffering techniques incorporating fiber delay lines (FDLs) in the switch architecture. The present paper proposes a novel switch architecture for packet contention resolution in synchronous OPS network employing the packet circulation in FDLs in a synchronized manner. A mathematical model for the proposed switch architecture is developed employing packet queuing control to estimate the blocking probability for the incoming traffic. The switch performance is analyzed with a suitable contention resolution al-gorithm through the computer simulation. The simulation results substantiate the proposed model for the switch architecture.

A passive optical network based on optical code division multiplexing and time division multiple access technology

A passive optical network （PON） scheme based on optical code division multiplexing （OCDM） for the downstream traffics is proposed and analyzed in detail. In the PON, the downstream traffics are broadcasted by OCDM technology to guarantee the security, while the upstream traffics pass through the same optical fiber by the common time division multiple access （TDMA） technology to decrease the cost. This schemes are denoted as OCDM/TDMA-PON, which can be applied to an optical access network （OAN） with full services on demand, such as Internet protocol, video on demand, tele-presence and high quality audio. The proposed OCDM/TDMA-PON scheme combines advantages of PON, TDMA, and OCDM technology. Simulation results indicate that the designed scheme improves the OAN performance, and enhances flexibility and scalability of the system.

Anycast Transmission in Routing Modulation Level Spectrum Assignment (RMLSA) Problem on Space Division Multiplexing (SDM) Elastic Optical Networks (EON)

With the rise of cloud computing in recent years, a large number of streaming media has yielded an exponential growth in network traffic. With the now present 5G and future 6G, the development of the Internet of Things (IoT), social networks, video on demand, and mobile multimedia platforms, the backbone network is bound to bear more traffic. The transmission capacity of Single Core Fiber (SCFs) may be limited in the future and Spatial Division Multiplexing (SDM) leveraging multi-core fibers promises to be one of the solutions for the future. Currently, Elastic optical networks (EONs) with multi-core fibers (MCFs) are a kind of SDM-enabled EONs (SDM-EON) used to enhance the capacity of transmission. The resource assignment in MCFs, however, will be subject to Inter-Core Crosstalk (IC-XT), hence, reducing the effectiveness of transmission. This research highlights the routing, modulation level, and spectrum assignment (RMLSA) problems with anycast traffic mode in SDM-EON. A multipath routing scheme is used to reduce the blocking rate of anycast traffic in SDM-EON with the limit of inter-core crosstalk. Hence, an integer linear programming (ILP) problem is formulated and a heuristic algorithm is proposed. Two core-assignment strategies: First-Fit (FF) and Random-Fit (RF) are used and their performance is evaluated through simulations. The simulation results show that the multipath routing method is better than the single-path routing method in terms of blocking ratio and spectrum utilization ratio. Moreover, the FF is better than the RF in low traffic load in terms of blocking ratio (BR), and the opposite in high traffic load. The FF is better than the RF in terms of a spectrum utilization ratio. In an anycast protection problem, the proposed algorithm has a lower BR than previous works.

An Arrangement of Channels and Transceivers in Optical Packet Switching Networks

Based on a media access and control（MAC）protocol,an arrangement of channels and transceivers in optical packet switching dense wavelength division multiplexing（DWDM）networks is proposed in this paper.In order to reduce the cost of nodes,fixed transmitters and receivers are used instead of tunable transmitters and receivers.Two fixed transmitters and many fixed receivers are used in each node in the scheme.The average waiting delay of this scheme is analyzed through mathematics and computer simulation.The result shows that the property of the scheme is almost the same as using tunable transmitter and receiver.Furthermore,if the tuning time of tunable transmitters is taken into account,the performance of the tunable transmitter scheme is poor than this scheme at the average waiting delay and throughput of the network.

Feasibility study on sinkhole monitoring with fiber optic strain sensing nerves

Anthropogenic activity-induced sinkholes pose a serious threat to building safety and human life nowadays.Real-time detection and early warning of sinkhole formation are a key and urgent problem in urban areas.This paper presents an experimental study to evaluate the feasibility of fiber optic strain sensing nerves in sinkhole monitoring.Combining the artificial neural network(ANN)and particle image velocimetry(PIV)techniques,a series of model tests have been performed to explore the relationship between strain measurements and sinkhole development and to establish a conversion model from strain data to ground settlements.It is demonstrated that the failure mechanism of the soil above the sinkhole developed from a triangle failure plane to a vertical failure plane with increasing collapse volume.Meanwhile,the soil-embedded fiber optic strain sensing nerves allowed deformation monitoring of the ground soil in real time.Furthermore,the characteristics of the measured strain profiles indicate the locations of sinkholes and the associated shear bands.Based on the strain data,the ANN model predicts the ground settlement well.Additionally,micro-anchored fiber optic cables have been proven to increase the soil-to-fiber strain transfer efficiency for large deformation monitoring of ground collapse.

Combined optical fiber interferometric sensors for the detection of acoustic emission

A type of combined optical fiber interferometric acoustic emission sensor is proposed. The sensor can be independent on the laser source and make light interference by matching the lengths of two arms,so it can be used to monitor the health of large structure. Theoretical analyses indicate that the system can be equivalent to the Michelson interferometer with two optical fiber loop reflectors,and its sensitivity has been remarkably increased because of the decrease of the losses of light energy. PZT is powered by DC regulator to control the operating point of the system,so the system can accurately detect feeble vibration which is generated by ultrasonic waves propagating on the surface of solid. The amplitude and the frequency of feeble vibration signal are obtained by detecting the output light intensity of interferometer and using Fourier transform technique. The results indicate that the system can be used to detect the acoustic emission signals by the frequency characteristics.

Loading Localization by Small-Diameter Optical Fiber Sensors

Structural health monitoring(SHM)in service has attracted increasing attention for years.Load localization on a structure is studied hereby.Two algorithms,i.e.,support vector machine(SVM)method and back propagation neural network(BPNN)algorithm,are proposed to identify the loading positions individually.The feasibility of the suggested methods is evaluated through an experimental program on a carbon fiber reinforced plastic laminate.The experimental tests involve in application of four optical fiber-based sensors for strain measurement at discrete points.The sensors are specially designed fiber Bragg grating(FBG)in small diameter.The small-diameter FBG sensors are arrayed in 2-D on the laminate surface.The testing results indicate that the loading position could be detected by the proposed method.Using SVM method,the 2-D FBG sensors can approximate the loading location with maximum error less than 14 mm.However,the maximum localization error could be limited to about 1 mm by applying the BPNN algorithm.It is mainly because the convergence conditions(mean square error)can be set in advance,while SVM cannot.

Using CSMA/CD for Ethernet Passive Optical Network (EPON)

Using CSMA/CD for EPON can eliminate the augmentations, such as multi-point control protocol and point-to-point emulation, added to the existing 802.3 architecture due to the incompatibility of PON to Ethernet. Both full-duplex EPON system and half-duplex EPON system using CSMA/CD were proposed. In the full-duplex EPON, CSMA/CD is used as the upstream MAC protocol. In the half-duplex EPON system, both upstream and downstream traffic contend for the optical channel through CSMA/CD protocol. The upstream lightwave redirection and collision detection techniques were given. By the analysis and simulation, the throughput performance of the half-duplex EPON system is proven to be as well as that of the existing high speed half-duplex Ethernet LAN.

Digital twin modeling and controlling of optical power evolution enabling autonomous-driving optical networks:a Bayesian approach

Optical networks are evolving toward ultrawide bandwidth and autonomous operation.In this scenario,it is crucial to accurately model and control optical power evolutions(OPEs)through optical amplifiers(OAs),as they directly affect the signal-to-noise ratio and fiber nonlinearities.However,a fundamental contradiction arises between the complex physical phenomena in optical transmission and the required precision in network control.Traditional theoretical methods underperform due to ideal assumptions,while data-driven approaches entail exorbitant costs associated with acquiring massive amounts of data to achieve the desired level of accuracy.In this work,we propose a Bayesian inference framework(BIF)to construct the digital twin of OAs and control OPE in a data-efficient manner.Only the informative data are collected to balance the exploration and exploitation of the data space,thus enabling efficient autonomous-driving optical networks(ADONs).Simulations and experiments demonstrate that the BIF can reduce the data size for modeling erbium-doped fiber amplifiers by 80%and Raman amplifiers by 60%.Within 30 iterations,the optimal controlling performance can be achieved to realize target signal/gain profiles in links with different types of OAs.The results show that the BIF paves the way to accurately model and control OPE for future ADONs.

Simulation of Optical Packet-Switched Metropolitan Area Network

This paper introduces architectures of two types optical packet switched metropolitan area networks and their media access control protocols. We have designed related network simulation systems. With these simulation systems, the characteristics and performance of the two MANs can be achieved.

A Framework for an Energy-Efficient Bandwidth Allocation Approach through Dynamic ONTs Grouping in Flexible GPON Access Networks

The growing demands for high speed connectivity to keep pace with bandwidth intensive applications and services have spawned the idea of developing PONs with capabilities beyond those of copper and wireless-based technologies in access network. In this article, an approach for the design of an energy efficient bandwidth allocation mechanism for the shared upstream communication link in the Fiber to the Home (FTTH) access network is presented and evaluated using Mixed Integer Linear Programming (MILP) model. In the MILP model, two objective functions for minimization of power consumption and minimization of blocking were evaluated. The results have shown that with the objective of power minimization approach, Optical Network Terminals (ONTs) are efficiently grouped to the minimum number of active networking Optical Line Terminal (OLT) switches, traffic is groomed, ports are efficiently utilized, and hence total power consumption is minimized. Results have shown that with energy efficient bandwidth allocation approach consideration, energy savings can reach up to 80% for different examined traffic loads following uniform distribution.