Crustal Structure Revealed by a Deep Seismic Sounding Profile of Baijing-Gaoming-Jinwan in the Pearl River Delta

The Pearl River Estuary area, located in the middle part of the southern China coastal seismic belt, has long been considered a potential source of strong earthquakes above magnitude 7.0. To scientifically assess the potential strong earthquake risk in this area, a three-dimensional artificial seismic sounding experiment, consisting of a receiving array and seabed seismograph, was performed to reveal the deep crustal structure in this region. We used artificial ship-borne air-gun excitation shots as sources, and fixed and mobile stations as receivers to record seismic data from May to August 2015. This paper presents results along a line from the western side of the Pearl River Estuary to the western side of the Baijing-Gaoming-Jinwan profile. A two-dimensional velocity structure was constructed using seismic travel-time tomography. The inversion results show that the Moho depth is 27 km in the coastal area and 30 km in the northwest of the Pearl River Estuary area, indicating that the crust thins from land to sea. Two structural discontinuities and multiple low-velocity anomalies appear in the crustal section. Inside both discontinuity zones, a low-velocity layer, with a minimum velocity of 6.05 km s^(-1), exists at a depth of about 15 km, and another, with a minimum velocity of 6.37 km s^(-1), exists at a depth of about 21.5 km between the middle and lower crust. These low velocities suggest that the discontinuities may consist of partly molten material. Earthquakes with magnitudes higher than 5.0 occurred in the low-velocity layer along the profile. The deep Kaiping-Enping fault, rooted in the crust, may be one of the most important channels for deep material upwelling and is related to tectonic movement since the Cretaceous in the Pearl River Delta tectonic rift basin.

Crustal Structure of the Chuan-Dian Block Revealed by Deep Seismic Sounding and its Implications for the Outward Expansion of the East Tibetan Plateau

The Chuan-Dian Block(CDB)is located in the southeastern margin of the Tibetan Plateau,with a complex geological structure and active regional faults.The present tectonic condition with strong crustal deformation is closely related to the ongoing collision of the India and Eurasia plates since 65 Ma.The study of the crustal structure of this area is key to revealing the evolution and deep geodynamics of the lateral collision zone of the Tibetan Plateau.Deep seismic sounding is the most efficient method with which to unravel the velocity structure of the whole crust.Since the 1980s,19 deep seismic sounding profiles have been captured within the CDB area.In this study,we systematically integrate the research results of the 19 profiles in this area,then image the 3D crustal velocity,by sampling with a 5 km spacing and 2D/3D Kriging interpolation.The results show the following.(1)The Moho depth in the study area deepens from 30 km in the south to 66 km in the north,whereas there is no apparent variation from west to east.The Pn wave velocity is higher in stable tectonic units,such as 7.95 km/s in the Lanping-Simao block and 7.94 km/s in the western margin of the Yangtze block,than in active or mobile tectonic units,such as 7.81 km/s in the Baoshan block,7.72 km/s in the Tengchong block and 7.82 km/s in the Zhongdian block.(2)The crustal nature of the Tengchong block,the northern Lanping-Simao block and the Zhongdian block reflects a type of orogenic belt,having relatively strong tectonic activities,whereas the crustal nature of the central Lanping-Simao block and the western margin of the Yangtze block represents a type of platform.The different features of the upper-middle crust velocity,Moho depth and Pn wave velocity to both sides of the Red River fault zone and the Xianshuihe fault zone,reflect that they are clearly ultra-crustal.(3)Based on the distribution of the low velocity zones in the crust,the crustal material of the Tibetan Plateau is flowing in a NW–SE direction to the north of 26°N and to the west of 101°E,then diverting to flowing eastwards to the east of 101°E.

Basic Features of the Crustal Structure in the Lower Yangtze and Its Neighboring Area in the Chinese Mainland： Review of Deep Seismic Sounding Research

The Deep Seismic Sounding( DSS) projects carried out from the 1970 s in the lower Yangtze region and its neighboring area were reviewed in this paper,then the basic wave group features of those wide angle reflection / refraction record sections,and of the crustal structure are summarized. It shows that there were in total five clear wave groups on the record sections,which include the first arrival Pg,the reflection P1 from the bottom interface of the upper crust,the reflection P3 from the bottom interface of the middle crust,the strong reflection Pm from the Moho boundary,and the refraction Pn from uppermost mantle. In general,these phases are easily consistently traced and compared,despite some first arrivals being delayed or arriving earlier than normal due to the shallow sedimentary cover or bedrocks. In particular,in the Dabie Mountain region the seismic events of a few gathered shots always have weak reflection energy,are twisted,or exhibit disorganized waveforms, which could be attributed to the disruption variations of reflection depth,the broken Moho,and the discontinuity of the reflection boundary within crust. The regional crustal structures are composed of the upper,middle and lower crust,of which the middle and lower layers can be divided into two weak reflection ones. The crustal thickness of the North China and Yangtze platform are 30km- 36 km,and the Moho exhibits a flat geometry despite some local uplifts. The average pressure velocity in lower crust beneath this two tectonic area is 6. 7 ± 0. 3km / s. Nevertheless,beneath the Dabieshan area the crustal thickness is 32km- 41 km,the Moho bends down sharply andtakes an abrupt 4km- 7km dislocation in the vertical direction. The average pressure velocity in the lower crust beneath the Dabieshan area is 6. 8 ± 0. 2km / s.

Crustal structure beneath the Qilian Orogen Zone from multiscale seismic tomography

The Qilian Orogen Zone(QOZ), located in the north margin of the Tibetan Plateau, is the key area for understanding the deformation and dynamics process of Tibet. Numerous geological and geophysical studies have been carried out on the mechanics of the Tibetan Plateau deformation and uplift; however, the detailed structure and deformation style of the Qilian Orogen Zone have remained uncertain due to poor geophysical data coverage and limited resolution power of inversion algorithms. In this study, we analyze the P-wave velocity structure beneath the Qilian Orogen Zone, obtained by applying multi-scale seismic tomography technique to P-wave arrival time data recorded by regional seismic networks. The seismic tomography algorithm used in this study employs sparsity constraints on the wavelet representation of the velocity model via L1-norm regularization. This algorithm can deal efficiently with uneven-sampled volumes, and can obtain multi-scale images of the velocity model. Our results can be summarized as follows:(1) The crustal velocity structure is strongly inhomogeneous and consistent with the surface geological setting. Significant low-velocity anomalies exist in the crust of northeastern Tibet, and slight high-velocity anomalies exist beneath the Qaidam Basin and Alxa terrane.(2)The Qilian Orogen Zone can be divided into two main parts by the Laji Shan Faults: the northwestern part with a low-velocity feature, and the southeastern part with a high-velocity feature at the upper and middle crust.(3) Our tomographic images suggest that northwestern and southeastern Qilian Orogen Zones have undergone different tectonic processes. In the northwest Qilian Orogen Zone, the deformation and growth of the Northern Tibetan Plateau has extended to the Heli Shan and Beida Shan region by northward overthrusting at the upper crust and thickening in the lower crust. We speculate that in the southeast Qilian Orogen Zone the deformation and growth of the Northern Tibet Plateau were of strike-slip style at the upper crust; in the lower crust, the evidence suggests ductile shear extrusion style and active frontage extension to the Alxa terrane.(4) The multi-scale seismic tomography technique provides multiscale analysis and sparse constraints, which has allowed to us obtain stable, high-resolution results.

The Crustal Structure and Seismic Activity in North China

A layered crustal block model of North China has been constructed based on large amount of data from seismic sounding carried out in recent two decades. Some deep fault zones, such as the Zhangjiakou.Penglai and Tancheng-Lujiang fault zones, divide the upper crust of North China into three upper crustal terranes and nine bolcks. There are distinct differences in velocity and depth distributions, which reflects Cenozoic block faulting in North China in the process of formation of the deep structure. The upper crust shows the features of transition in isostatic adjustment. The existence of a low-velocity layer in the middle crust is characteristic of the crustal structure in North China. There seems to be an increase of rheology of the rocks in the lower crust and a persistence of stable regional stress field. The patterns of the Moho on two sides of the Yanshan-Taihang Mountains are different. The relief of the Moho around Beijing, Shijiazhuang and Guangrao where the deep faults join together shows a quadrantal distribution in some degree. The dynamic sources for seismic activity are the NE-SW horizontal compression and the diapirism of the upper mantle. The middle and upper crust, especially the layered block structure has the most significant effects on seismicity, and the occurrence of earthquakes is more closely related to them than to the Moho.

Crustal velocity structure of central Gansu Province from regional seismic waveform inversion using firework algorithm

The firework algorithm（FWA） is a novel swarm intelligence-based method recently proposed for the optimization of multi-parameter, nonlinear functions. Numerical waveform inversion experiments using a synthetic model show that the FWA performs well in both solution quality and efficiency. We apply the FWA in this study to crustal velocity structure inversion using regional seismic waveform data of central Gansu on the northeastern margin of the Qinghai-Tibet plateau. Seismograms recorded from the moment magnitude（MW） 5.4 Minxian earthquake enable obtaining an average crustal velocity model for this region. We initially carried out a series of FWA robustness tests in regional waveform inversion at the same earthquake and station positions across the study region,inverting two velocity structure models, with and without a low-velocity crustal layer; the accuracy of our average inversion results and their standard deviations reveal the advantages of the FWA for the inversion of regional seismic waveforms. We applied the FWA across our study area using three component waveform data recorded by nine broadband permanent seismic stations with epicentral distances ranging between 146 and 437 km. These inversion results show that the average thickness of the crust in this region is 46.75 km, while thicknesses of the sedimentary layer, and the upper, middle, and lower crust are 3.15,15.69, 13.08, and 14.83 km, respectively. Results also show that the P-wave velocities of these layers and the upper mantle are 4.47, 6.07, 6.12, 6.87, and 8.18 km/s,respectively.

Crustal structure of northeastern Tibetan plateau and Ordos block:Waveform interpretation of the Maqen-Jingbian seismic refraction profile

The Maqen-Jingbian wide-angle seismic reflection and refraction experiment was carried out in 1998, which aims at determining detailed structure in the crust and top of the upper mantle and understanding structural relation between the northeastern Tibetan plateau and the Ordos block. The 1-D crustal models inferred by waveform inversion show strong variations in crustal structure, which can be classified into four different types： ① an Ordos platform with the Proterozoic crust and two high-velocity layers in the northeast section, ② a transitional crust between the northeastern Tibetan plateau and the Ordos block across the Haiyuan earthquake zone, ③ the Qilian orogenic zone in the central part, and ④ the Qinling orogenic zone in the southwestern section. The Moho depth increases from -42 km to -62 km from the NE part to the SW part of the profile. The crystalline crust consists of the upper crust and lower crust in northeastern Tibetan plateau. There is an obviously low P-wave velocity layer dipping northeastward, which is 12-13 km thick, at the bottom of the upper crust in Qinling orogenic zone and Haiyuan earthquake zone. The lower crust is characterized by alternating high and low P-wave velocity layers. Beneath Ordos block, i.e., the NE part of the profile, the crust shows quite a smooth increase in P-wave ve- locity down to the Moho at a depth of about 42 km.

Multiple phases analysis of deep seismic sounding records in North China Craton

The North China Craton(NCC)is a key region to study the destruction of the ancient craton.Two groups of phases(denoted as"Pw1"and"Pw2"),which are parallel to the PmP phase reflected from the Moho discontinuity and the PLP phase reflected from the Lithosphere and Asthenosphere Boundary(LAB)respectively,are found on the record section of the Rongcheng-XinzhouAlxa long-range deep seismic sounding profile.The nature of the two phases is still unclear,although they are clearly observable and reverberant.In this paper,we use travel time inversion and amplitude forward modelling to fit the reflected and refracted phases in the lithosphere.The results show:(1)the Pw1 is a multiple reflected phase which is successively reflected by the crystalline basement,the surface,the Moho and then finally received on the surface;(2)the Pw2 phase is also a multiple reflected phase successively reflected by the crystalline basement,the surface,the LAB interface and then received on the surface.We conclude that the significant velocity difference between the thick sedimentary cover and the crystalline basement in the North China rifted basin may be the main reason for generating the multiple reflections.Furthermore,the two multiple reflections provide potent constraints on the lithospheric velocity model,and constitute seismological evidence for the lithospheric thinning in the eastern NCC.

Crustal velocity, density structure, and seismogenic environment in the southern segment of the North- South Seismic Belt, China

The southern segment of the North-South Seismic Belt in China is a critical region for earthquake preparedness and risk reduction efforts.However,limited by the low density of seismic stations and the use of single-parameter physical structural models,the deep tectonic features and seismogenic environment in this area remain controversial.Thus,a comprehensive analysis based on high-resolution crustal structures and multiple physical parameters is required.In this study,we applied the ambient noise tomography method to obtain the three-dimensional(3D)crustal S-wave velocity structure using continuous waveform data from 112 permanent stations and 350 densely distributed temporary stations in the southern segment of the North-South Seismic Belt.Then,we obtained the high-resolution 3D density structure through wavenumber-domain 3D gravity imaging constrained by the velocity structure.The low-velocity and low-density anomalies in the upper crust of the study area were mainly distributed in the Sichuan Basin and around Dali and Simao,while the high-velocity and high-density anomalies were primarily distributed in the Panxi region,corresponding to the surface geological features.Two prominent low-velocity and low-density anomalies were observed in the middle and lower crust:one to the west of the Songpan-Garzêblock and Sichuan-Yunnan diamond-shaped block,and the other near the Anninghe-Xiaojiang fault.Combined with the spatial distribution of seismic events in the study area,we found that previous earthquakes predominantly occurred in the transition zones between high and low anomaly regions and in the low-velocity and low-density zones in the upper crust.In contrast,moderate-to-strong earthquakes mainly occurred within the transition zones between high and low anomaly regions and close to the high-velocity and high-density regions,often with low-velocity and low-density layers below their hypocenters.Fluids play a critical role in the seismogenic process by reducing fault strength and destabilizing the stress state,which may be a triggering factor for earthquakes in the study area.Additionally,the upwelling of molten materials from the mantle may lead to energy accumulation and stress conce-ntration,providing an important seismogenic background for moderate-to-strong earthquakes in this area.

Joint land-sea seismic survey and research on the deep structures of the Bohai Sea areas

This paper presents the survey and research work of two land-sea profiles in the Bohai Sea, China, carried out in 2010-2011, including the seismic sources on land and in the sea, the ocean bottom seismographs （OBS） and their recovery, the coupling of OBS and the environment noise in sea area, the data quality of OBSs, and the result of data analysis. We focused on the investigation of crustal structures revealed by the two NE／EW-trending joint land-sea profiles. In combination with the Pn-velocity distribution and gravity- magnetic inversion results in the North China Craton, we propose that the undulation of the Moho interface in the Bohai and surrounding areas is not strong, and the lithospheric thinning is mainly caused by the thinning of its mantle part. The research result indicates that obvious lateral variations of Moho depth and seismic velocity appear nearby all the large-scale faults in Bohai Sea, and there is evidence of underplating and reforming of the lower crust by mantle material in the Bohai area. However, geophysical evidence does not appear to support the ＂mantle plume＂ or ＂delamination＂ model for the North China Craton destruction. The crustal structure of the Bohai Sea revealed ＂a relatively normal crust and obviously thinned mantle lid＂, local velocity anomalies and instability phenomena in the crust. These features may represent a combined effect of North China-Yangtze collision at an early stage and the remote action of Pacific plate subduction at a late stage.

Seismic Velocity Structure and Composition of the Continental Crust of Eastern China

On the basis of a one-by-one latitude-longitude grid three-dimensional seismic velocity model, the crustal P-wave velocity structure in eastern China (105-125°E and 18-41°N) is obtained, and a set of geotherms for each grid is established for P-T correction on P-wave velocities. The average depths of sub-crustal layers and their average P-wave velocities of 18 tectonic units in eastern China are exhibited. Our result presents a 32-34 km thick crust beneath eastern China, which is thinner than previous studies, with an average velocity of 6.54 km/s, corresponding to a 5 kg/m3 variation in crustal mean density. The thicker upper but thinner middle and lower crust results in a lower average seismic velocity of eastern China. An intermediate crustal composition with a SiO2 content of 59.7 wt% has been estimated. However, there exists a significant lateral variation in the crustal structures among the tectonic units of eastern China. The structure and composition features of some regions in eastern China indicate that extension has played an important role in the continental crust evolution of eastern China.

Genetic algorithm in seismic waveform inversion and its application in deep seismic sounding data interpretation

A genetic algorithm of body waveform inversion is presented for better understanding of crustal and upper mantle structures with deep seismic sounding （DSS） waveform data. General reflection and transmission synthetic seismogram algorithm, which is capable of calculating the response of thin alternating high and low velocity layers, is applied as a solution for forward modeling, and the genetic algorithm is used to find the optimal solution of the inverse problem. Numerical tests suggest that the method has the capability of resolving low-velocity layers, thin alternating high and low velocity layers, and noise suppression. Waveform inversion using P-wave records from Zeku, Xiahe and Lintao shots in the seismic wide-angle reflection/refraction survey along northeastern Qinghai-Xizang （Tibeteau） Plateau has revealed fine structures of the bottom of the upper crust and alternating layers in the middle/lower crust and topmost upper mantle.

Moho Structure of the Southwest Sub-Basin, South China Sea, from a Multichannel Seismic Reflection Profile NH973-1

Moho structure provides important clues for understanding crustal structure,isostatic state and magmatic flux from mantle to surface.Across-basin Moho structure of the South China Sea(SCS)is important for understanding crustal evolution mechanisms of both continental break-up and seafloor spreading processes.Southwest Sub-basin(SWSB)opened up the latest and has the closest continental margins,making it the best to study the across-basin structure.Multichannel seismic(MCS)reflection data of line NH973-1 that crosses SWSB in NW-SE direction were reprocessed in order to image Moho structure.In MCS data,Moho reflectors are observed in places,which were not revealed in prior researches.The Moho generally shows symmetric structure on both sides of the central rift valley(CRV)and with variations in crustal thickness.Around CRV,the Moho is 2 seconds depth in two-way travel time(TWTT)beneath the igneous basement,which corresponds to 7 km depth,indicating normal oceanic crustal accretion during the ending of seafloor spreading.Close to the continent-ocean boundary(COB),the Moho becomes shallow to 1 second depth in TWTT(3.5 km),implying strong crustal thinning towards the continent,probably because of poor magma supply at the beginning of seafloor spreading.At south COB,the Moho depth under the crust almost reaches zero,which could be explained as a result of exhumed mantle.In addition,two low-angle,deep-penetrating normal faults are observed at south COB.The faults cut across the Moho into the upper mantle,which may be attributed to lithospheric hyper-stretching at COB during continental break-up.

The heterogeneous characteristics of crust-mantle structures and the seismic activities in the northwest Beijing region

In this paper, the abnormal characteristics of the crustal structures in the seismic active region, Yanqing-Huailai and Zhangbei-Shangyi, are obtained by means of comprehensively interpreting and studying the data of deep seis- mic sounding profiles passing through the northwestern part of Zhangjiakou-Bohai seismic zone. The results show that the fluctuation of crystalline basement in the study region is obvious and that there exist considerable differ- ences in depth in different geological units. The locally abrupt variation of crystalline basement depths may be regarded as a mark of existence of crystalline basement faults. These crystalline basement faults and deep crustal faults provide a pass for the magma upwelling, resulting in the strong inhomogeneity of crustal structures. These phenomena of the complex seismic reflected waves and locally discontinuous reflection zones with different en- ergy indicate that the intensive squeeze and deformation of crust took place, which have led to the complex crustal structures and offered the dynamic source for the earthquake occurrence in this region. The low velocity bodies in different depths of crust and the local interface C1 in Zhangbei-Shangyi region may result from repeated magmatic activities. The certain stress accumulation in the brittle upper crust can cause the occurrence of earthquake under the action of local tectonic activity.

Crustal structure in northern margin of Tianshan mountains and seismotectonics of the 1906 Manas earthquake

长86 km、南北向横跨乌鲁木齐坳陷的深地震反射剖面,揭示了北天山山前地壳的薄皮构造特征.共深度点叠加剖面的石河子以南部分显示了天山北缘平行山体的第一和第二排背斜构造.与双程时间分别为2.5～3.0s和5.5～6.0s的反射事件对应的滑脱构造,将地壳深部构造与地表逆断裂-褶皱构造联系在一起.玛纳斯断裂以铲形方式向下延伸,在2.5s左右深度归并于第一滑脱面,向南与清水河断裂汇合.在5.5～6.0s深度上为与玛纳斯下背斜相连的主滑脱面.它们最终汇集到准噶尔南缘断裂.石河子以北的坳陷沉积深度达12～14km.沿剖面的莫霍界面深度在准噶尔盆地为45km左右,往南加深至50km.对该区域内的深地震测深剖面和布格重力异常资料的分析结果,与深反射剖面的地壳结构图象具有一致性.深地震反射剖面通过1906年玛纳斯7.7级地震宏观震中区,共深度点叠加剖面用于推断玛纳斯7.7级地震与北天山山前地壳构造之间的关系:玛纳斯地震属于一类“褶皱地震”,其发震构造是由准噶尔南缘断裂、清水河逆冲断裂、滑脱面和玛纳斯浅部断坡组成的断层系.

Crustal structure in Xiaojiang fault zone and its vicinity

Based on the integrative interpretation of travel-time data and amplitude information obtained from the deep seismic sounding experiment on the Chuxiong-Luoping profile, eastern Yunnan province, carried out in January of 2005, we present a 2-D P wave velocity structure along the profile. The crustal structure shows remarkable contrasts between the two sides of the Xiaojiang fault zone, although the whole profile is situated within the Yangtze platform. The average P wave velocities of the crust on the west and east sides of the fault zone are 6.21 km/s and 6.32 km/s, respectively, and the crustal thicknesses are 41 km and 45 km, respectively. These results imply that the crust to the east of the Xiaojiang fault zone presents characteristics of crustal structure in a stable platform, while the crust to the west is complicated with a lower velocity zone in middle of the upper crust. The average velocity of 6.21 km/s is lower than the global continental crustal average （6.30 km/s）, indicating that the region is tectonically active. According to the lateral variation of velocity and depth of interfaces （including the Moho）, it is inferred that the Xiaojiang fault zone has cut through the whole crust. It is also deduced that existence of low velocity zone in middle of the upper crust is conducive to the south-southeastern sliding of the Sichuan- Yunnan （Chuan-Dian） rhombus block.

Crustal structure beneath the Songpan——Garze orogenic belt

The Benzilan-Tangke deep seismic sounding profile in the western Sichuan region passes through the Song-pan-Garze orogenic belt with trend of NNE. Based on the travel times and the related amplitudes of phases in the record sections, the 2-D P-wave crustal structure was ascertained in this paper. The velocity structure has quite strong lateral variation along the profile. The crust is divided into 5 layers, where the first, second and third layer belong to the upper crust, the forth and fifth layer belong to the lower crust. The low velocity anomaly zone gener-ally exists in the central part of the upper crust on the profile, and it integrates into the overlying low velocity basement in the area to the north of Ma'erkang. The crustal structure in the section can be divided into 4 parts: in the south of Garze-Litang fault, between Garze-Litang fault and Xianshuihe fault, between Xianshuihe fault and Longriba fault and in the north of Longriba fault, which are basically coincided with the regional tectonics division. The crustal thickness decreases from southwest to northeast along the profile, that is, from 62 km in the region of the Jinshajiang River to 52 km in the region of the Yellow River. The Moho discontinuity does not obviously change across the Xianshuihe fault based on the PmP phase analysis. The crustal average velocity along the profile is lower, about 6.30 km/s. The Benzilan-Tangke profile reveals that the crust in the study area is orogenic. The Xianshuihe fault belt is located in the central part of the profile, and the velocity is positive anomaly on the upper crust, and negative anomaly on the lower crust and upper mantle. It is considered as a deep tectonic setting in favor of strong earthquake's accumulation and occurrence.

High-resolution crustal velocity imaging using ambient noise recordings from a high-density seismic array:An example from the Shangrao section of the Xinjiang basin,China

A profile of shallow crustal velocity structure(1–2 km) may greatly enhance interpretation of the sedimentary environment and shallow tectonic deformation.Recent advances in surface wave tomography, using ambient noise data recorded with high-density seismic arrays, have improved the understanding of regional crustal structure. As the interest in detailed shallow crustal structure imaging has increased, dense seismic array methods have become increasingly efficient. This study used a high-density seismic array deployed in the Xinjiang basin in southeastern China, to record seismic data, which was then processed with the ambient noise tomography method. The high-density seismic array contained 203 short-period seismometers, spaced at short intervals(～ 400 m). The array collected continuous records of ambient noise for 32 days. Data preprocessing,cross correlation calculation, and Rayleigh surface wave phase-velocity dispersion curve extraction, yielded more than 16,000 Rayleigh surface wave phase-velocity dispersion curves, which were then analyzed using the direct-inversion method. Checkerboard tests indicate that the shear wave velocity is recovered in the study area, at depths of 0–1.4 km,with a lateral image resolution of ～ 400 m. Model test results show that the seismic array effectively images a 50 m thick slab at a depth of 0–300 m, a 150 m thick anomalous body at a depth of 300–600 m, and a 400 m thick anomalous body at a depth of 0.6–1.4 km. The shear wave velocity profile reveals features very similar to those detected by a deep seismic reflection profile across the study area. This demonstrates that analysis of shallow crustal velocity structure provides high-resolution imaging of crustal features.Thus, ambient noise tomography with a high-density seismic array may play an important role in imaging shallow crustal structure.

Seismic phases from the Moho and its implication on the ultraslow spreading ridge

The Moho interface provides critical evidence for crustal thickness and the mode of oceanic crust accretion. The seismic Moho interface has not been identified yet at the magma-rich segments （46°-52°E） of the ultra- slow spreading Southwestern Indian Ridge （SWIR）. This paper firstly deduces the characteristics and do- mains of seismic phases based on a theoretical oceanic crust model. Then, topographic correction is carried out for the OBS record sections along Profile Y3Y4 using the latest OBS data acquired from the detailed 3D seismic survey at the SWIR in 2010. Seismic phases are identified and analyzed, especially for the reflected and refracted seismic phases from the Moho. A 2D crustal model is finally established using the ray tracing and travel-time simulation method. The presence of reflected seismic phases at Segment 28 shows that the crustal rocks have been separated from the mantle by cooling and the Moho interface has already formed at zero age. The 2D seismic velocity structure across the axis of Segment 28 indicates that detachment faults play a key role during the processes of asymmetric oceanic crust accretion.

The thickness and structural characteristics of the crust across Tibetan plateau from active-sources seismic profiles

The Tibetan plateau as one of the youngest orogen on the Earth was considered as the result of continent-continent collision between the Eurasian and Indian plates. The thickness and structure of the crust beneath Tibetan plateau is essential to understand deformation behavior of the plateau. Active-source seismic profiling is most available geophysical method for imaging the structure of the continental crust. The results from more than 25 active-sources seismic profiles carried out in the past twenty years were reviewed in this article. A preliminary cross crustal pattern of the Tibetan Plateau was presented and discussed. The Moho discontinuity buries at the range of 60-80 km on average and have steep ramps located roughly beneath the sutures that are compatible with the successive stacking/accretion of the former Cenozoic blocks northeastward. The deepest Moho （near 80 km） appears closely near IYS and the crustal scale thrust system beneath southern margin of Tibetan plateau suggests strong dependence on collision and non-distributed deformation there. However, the -20 km order of Moho offsets hardly reappears in the inline section across northern Tibetan plateau. Without a universally accepted, convincing dynamic explanation model accommodated the all of the facts seen in controlled seismic sections, but vertical thickening and northeastern shorten of the crust is quite evident and interpretable to a certain extent as the result of continent-continent collision. Simultaneously, weak geophysical signature of the BNS suggests that convergence has been accommodated perhaps partially through pure-shear thickening accompanied by removal of lower crustal material by lateral escape. Recent years the result of Moho with -7 km offset and long extend in south-dip angle beneath the east Kunlun orogen and a grand thrust fault at the northern margin of Qilian orogen has attract more attention to action from the northern blocks. The broad lower-velocity area in the upper-middle crust of the Lhasa block was once considered as resulted from partially melted rocks. However the low normal vp/vs ratio and the Moho stepwise rise fail to support significant partial melting in the middle-lower crust of the central-northern Tibetan plateau. Furthermore, the lower-velocity of crust occasionally disappears, and/or local thinned exhibits their non-stationary spatial distribution.