Study of dual-directional high rate secure communication systems using chaotic multiple-quantum-well lasers

A scheme of synchronized injection multi-quantum-well （MQW） laser system using optical couphng-feedback is presented for performing chaotic dual-directional secure communication. The performance characterization of chaos masking is investigated theoretically, the equation of synchronization demodulation is deduced and its root is also given. Chaos masking encoding with a rate of 5 Gbit/s and a modulation frequency of 1 GHz, chaos modulation with a rate of 0.2 Gbit/s and a modulation frequency of 0.2 GHz and chaos shifting key with a rate of 0.2 Gbit/s are numerically simulated, separately. The ratio of the signal to the absolute synchronous error and the time for achieving synchronous demodulation are analysed in detail. The results illustrate that the system has stronger privacy and good performances so that it can be applied in chaotic dual-directional high rate secure communications.

Digital Communication Using Multi-mode Chaotic Lasers

The digital communication in a system of two multi-mode solid state chaotic lasers is investigated theoretically. If the usual method working well in a single-mode laser system is applied to a multi-mode laser system, the memory effect of the two nearest digits can cause high rate of mistakes when the digits are decoded through the subtraction of receiver output from the transmittal. By introducing the deviations of two nearest maximum and minimum fluctuationsof the signal to decode the digit, the message can be decoded correctly. Also, this communication method does not critically depend on the quality of the chaotic synchronization of the two multi-mode lasers.

Advanced Space Laser Communication Technology on CubeSats

The free space optical communication plays an important role in space-terrestrial integrated network due to its advantages including great improvement of data rate performance,low cost,security enhancement when compared with conventional radio frequency(RF) technology.Meanwhile,CubeSats become popular in low earth orbit(LEO) network because of the low cost,fast response and the possibility of constituting constellations and formations to execute missions that a single large satellite cannot do.However,it is a difficult task to build an optical communication link between the CubeSats.In this paper,the cuttingedge laser technology progress on the CubeSats is reviewed.The characters of laser link on the CubeSat and the key techniques in the laser communication terminal(LCT) design are demonstrated.

Synchronization and bidirectional communication without delay line using strong mutually coupled semiconductor lasers

This paper numerically demonstrates synchronization and bidirectional communication without delay line by using two semiconductor lasers with strong mutual injection in a face-to-face configuration. These results show that both of the two lasers＇ outputs synchronize with their input chaotic carriers. In addition, simulations demonstrate that this kind of synchronization can be used to realize bidirectional communications without delay line. Further studies indicate that within a small deviation in message amplitudes of two sides （±6%）, the message can be extracted with signal-noise-ratio more than 10 dB; and the signal-noise-ratio is extremely sensitive to the message rates mismatch of two sides, which may be used as a key of bidirectional communication.

Study on Satellite-to-ground Laser Communications with Existence of Atmosphere

The laser beam used to establish a communication channel between satellite and ground segments has a small divergence angle and a tiny spot on the Earth's surface,which may lead to the fail of the system.So it's important to study the deflection of laser beam by the Earth's atmosphere and find a way to calibrate this error.Both theoretical analysis and real data processing method are used to obtain the mathematical model for divergence angle of laser communication beam and its correction function.Then the model has been applied to the data,which was used to describe the atmosphere state by traditional ground segments to obtain the critical elevation angle.According to the results of calculation,our conclusion will be that the correction should be done when the critical elevation happens.

Application Research on Space Laser Communication in Bistatic Radar System

There exist three synchronizing problems in the bistatic radar system that some signals of the radar receiver must be synchronized with those of the radar transmitter. Several methods realizing data transmission, which are used to complete the synchronization existing in the bistatic radar system, are described. Then a new idea is brought forward that employs space laser communication in the bistatic radar system to realize its data transmission. The theoretic analysis of the idea's usability and its merits are discussed in details. Finally the latest development of space laser communication is introduced, and the utility of the idea is pointed out further.

Acquisition,Pointing and Tracking System for Shipborne Space Laser Communication without Prior Information

A space laser communication acquisition,pointing and tracking(APT)system based on the beacon laser is designed without prior information.And then,a new target scanning method and a pointing and tracking algorithm are proposed.The target scanning mode is the round-trip triangular wave scanning,and it means that scanning track of the PAN-TILT platform follows the triangular wave repeatedly.For the pointing and tracking algorithm,the beacon laser is used as the auxiliary aiming light source.The position of the beacon laser in the viewfield of the complementary metal oxide semiconductor(CMOS)camera is calculated by the centroid algorithm.In order to realize the target tracking,the joint control method of the angle control and the angular velocity control is used.The simulation and experimental results show that the APT system can achieve full coverage scanning in the scanning area and capture the target in one scanning cycle successfully.After capturing the PAN-TILT platform,the pointing and tracking algorithm can track the PAN-TILT platform quickly and accurately,and the tracking accuracy is up to 0.22 mrad.

Fiber Grating Ring Laser in All Optical Communication System

Erbium fiber grating ring laser (EFRL) witn an integrated travelling wave and low polarization mode noise is reported. Through modulated experiment of a successful 2.488 Gb/s RZ data, it is shown that the EFRL is a promising alternative to DFB lasers for high-speed transmission applications.

Acquisition and Tracking Technology for Space Laser Communication

The divergence angle of laser beam used in space laser communication is usually no more than 100μrad.Using laser beam with small divergence angle to achieve acquisition and tracking for space laser link has always been a difficult problem.In addition,the random nature of the atmosphere will affect the satellite-ground laser link,which increases the difficulty of the acquisition and stable tracking for the laser link.Thus,taking into account the above challenges for satellite-ground laser communication,an acquisition and tracking scheme of using both beacon beam and signal beam was designed for the Laser Communication Terminal(LCT)of Shijian 20 satellite.In-orbit test results indicated that under the condition of moderate atmospheric turbulence(atmospheric coherence length r0≈3 cm),the process of acquisition and tracking for the satellite-ground laser link can be completed within 1 s after the initial pointing between the LCT and Optical Ground Station(OGS)is performed,and the tracking error was less than 1μrad(3σ).In addition,the laser link can be re-established quickly once being interrupted by unsteady atmospheric turbulence,and can be maintained for a long time under moderate twurbulence conditions,which lays a foundation for future application of satellite-ground laser communication.

Demonstration of 10 Gbps satellite-to-ground laser communications in engineering

In June 2023,researchers at the Aerospace Information Research Institute(AIR)of the Chinese Academy of Sciences undertook a series of experiments on satellite-to-ground laser communication using the Jilin-1 MF02A04(JLMF)satellite and independently developed a 500 mm optical communication ground station(AIROSG),achieving a successful throughput of 10 gigabits per second(Gbps)in the satellite-to-ground optical link.The obtained satellite payload data demonstrated good performance and satisfied the requirements of high-standard scientific applications.

All-optical suppression on the impact of Sun outage in laser satellite communication systems by using a nonlinear semiconductor optical amplifier

We introduce an all-optical approach,optical parametric amplification(OPA)processor to suppress the impact of Sun outage in laser satellite communication systems,which is implemented by only one nonlinear semiconductor optical amplifier driven by both electrical and optical pumps.The optimized OPA processor,with a current of 539 mA and a pump-to-signal ratio of 16 dB,could significantly improve the signal quality by 3.5 dB in experiments for the elevation angle of Sun radiation of 0 rad.The signal quality improvement is observed in the whole range of the elevation angle,confirming the effectiveness of the proposed OPA processor in the field of Sun radiation mitigation.

Free-Space Optical communication using visible light

The possibility of visible red light laser being used as signal light source for Free-Space Optical (FSO) communication is proposed. Based on analysis of transmission in atmospheric channel concerning 650 nm laser beam, performance of wireless laser communication link utilizing a low power red laser diode was evaluated. The proposed system can achieve a maximum range of 300 m at data rate 100 Mb/s theoretically. An experimental short-range link at data rate 10 Mb/s covering 300 m has been implemented in our university. It is feasible to enhance the system performance such as link range and data rate by increasing transmitting power and decreasing laser beam divergence angle or through other approaches.

Dispersion compensation in an open-loop all-optical chaotic communication system

The optical chaotic communication system using open-loop fiber transmission is studied under strong injection conditions. The optical chaotic communication system with open-loop configuration is studied using fiber transmission under strong injection conditions. The performances of fiber links composed of two types of fiber segments in different dispersion compensation maps are compared by testing the quality of the recovered message with different bit rates and encrypted by chaotic modulation （CM） or chaotic shift keying （CSK）. The result indicates that the performance of the pre-compensation map is always worst. Two types of symmetrical maps are identical whatever the encryption method and bit-rate of message are. For the transmitting and the recovering of message of lower bit rate （1 Gb/s）, the post-compensation map is the best scheme. However, for the message of higher bit rate （2.5 Gb/s）, the parameters in communication system need to be modified properly in order to adapt to the high-speed application. Meanwhile, two types of symmetrical maps are the best scheme. In addition, the CM method is superior to the CSK method for high-speed applications. It is in accordance with the result in a back-to-back configuration system.

Improving performance of optical fibre chaotic communication by dispersion compensation techniques

This paper numerically investigates the effects of dispersion on optical fibre chaotic communication, and proposes a dispersion compensation scheme to improve the performance of optical fibre chaotic communication system. The obtained results show that the transmitter-receiver synchronization progressively degrades and the signal-to-noise ratio of the recovered message deteriorates as the fibre length increases due to the dispersion accumulation. Two segments of 2.5-km dispersion-compensating fibres are symmetrically placed at both ends of a segment of 245-km nonzero dispersionshifted fibre with low dispersion in one compensation period. The numerical results show that the signal-to-noise ratio of the extracted 1 GHz sinusoidal message is improved from -2.92 dB to 15.38 dB by this dispersion compensation for the transmission distance of 500 km.

850/940-nm VCSEL for optical communication and 3D sensing

This paper is going to review the state-of-the-art of the high-speed 850/940-nm vertical cavity surface emitting laser（VCSEL）, discussing the structural design, mode control and the related data transmission performance. InGaAs/AlGaAsmultiple quantum well （MQW） was used to increase the differential gain and photon density in VCSEL. The multiple oxidelayers and oxide-confined aperture were well designed in VCSEL to decrease the parasitic capacitance and generate single mode （SM） VCSEL. The maximal modulation bandwidth of 30 GHz was achieved with well-designed VCSEL structure. At the end of the paper, other applications of the near-infrared VCSELs are discussed.

Digital communication of two-dimensional messages in a chaotic optical system

The digital communication of two-dimensional messages is investigated when two solid state multi-mode chaotic lasers are employed in a master-slave configuration. By introducing the time derivative of intensity difference between the receiver （carrier） and the transmittal （carrier plus signal）, several signals can be encoded into a single pulse. If one signal contains several binary bits, two-dimensional messages in the form of a matrix can be encoded and transmitted on a single pulse. With these improvements in secure communications using chaotic multi-mode lasers, not only the transmission rate can be increased but also the privacy can be enhanced greatly.

High-speed chaotic communication using an optical fibre ring as a key

A chaotic communication scheme with a fibre ring inserted in the optical ~eedback of the transmitter laser as an additional key is proposed under anticipating synchronization. The numerical results show that the key can enhance the communication security effectively. It is theoretically safe for the communication scheme to transmit messages with a frequency beyond the relaxation oscllation frequency.

PERFORMANCE OF A NEW DECODING METHOD USED IN OPEN-LOOP ALL-OPTICAL CHAOTIC COMMUNICATION SYSTEM

A new decoding method with decoder is used in open-loop all-optical chaotic communication system under strong injection condition.The performance of the new decoding method is numerically investigated by comparing it with the common decoding method without decoder.For new decoding method,two cases are analyzed,including whether or not the output of the decoder is adjusted by its input to receiver.The results indicate the decoding quality can be improved by adjusting for the new decoding method.Meanwhile,the injection strength of decoder can be restricted in a certain range.The adjusted new decoding method with decoder can achieve better decoding quality than decoding method without decoder when the bit rate of message is under 5 Gb/s.However,a stronger injection for receiver is needed.Moreover,the new decoding method can broaden the range of injection strength acceptable for good decoding quality.Different message encryption techniques are tested,and the result is similar to that of the common decoding method,indicative of the fact that the message encoded by using Chaotic Modulation(CM) can be best recovered by the new decoding method owning to the essence of this encryption technique.

用于引力波探测的星间激光干涉测量模拟系统

星间激光干涉仪具有比地面干涉仪更长的干涉臂(10^(6)km),能够探测更低频段0.1 mHz~1 Hz的引力波。星间激光干涉仪具有典型的应答式外差干涉仪结构,其本质是一个光学锁相环。在地面环境下搭建模拟的星间激光干涉仪,成功将从激光器的频率锁定到稳频的主激光器频率上。结果显示:锁相环的锁定时间超过2×10^(4)s,满足了低频信号的探测条件;在较短位移和较长位移的不同条件下,干涉仪无粗大误差。经过分析得出:温度、气压等环境扰动带来的噪声是制约干涉仪精度的关键因素。

Impacts of operational parameters on nonlinear polarization rotation-based passively mode-locked fiber laser

The operational parameters including the polarization controlling and the pump power in a nonlinear polarization rotation-based passively mode-locked fiber laser are studied in this paper.The carrier rate equations of the activated erbium-doped fiber are first employed together with the nonlinear Shro¨dinger equations to reveal the relation between the operational parameters and the output state of the passively mode-locked fiber laser.The numerical and experimental results demonstrate that the output state of the mode-locked laser varies with the polarization controlling and the pump power.The periodicity of the polarization controlling is observed.With given pump power,there exists a set of polarization controlling under which the ultra-short pulse can be generated.With given polarization controlling,the mode-locked state can be maintained generally except for some particular values of pump power.Three shapes of the output optical spectra from the fiber cavity can be identified when the pump power changes.The results in this paper provide a comprehensive insight into the operation of the nonlinear polarization rotation-based passively mode-locked fiber laser.