期刊文献+
共找到9篇文章
< 1 >
每页显示 20 50 100
Loosely coordinating diluted highly concentrated electrolyte toward -60℃ Li metal batteries
1
作者 Han Zhang Ziqi Zeng +5 位作者 Qiang Wu Xinlan Wang Mingsheng Qin Sheng Lei Shijie Cheng Jia Xie 《Journal of Energy Chemistry》 SCIE EI CAS CSCD 2024年第3期380-387,I0009,共9页
Lithium metal batteries(LMBs) promise energy density over 400 Wh kg^(-1).However,they suffer severe electrochemical performance deterioration at sub-zero temperatures.Such failure behavior highly correlates to inferio... Lithium metal batteries(LMBs) promise energy density over 400 Wh kg^(-1).However,they suffer severe electrochemical performance deterioration at sub-zero temperatures.Such failure behavior highly correlates to inferior lithium metal anode(LMA) compatibility and sluggish Li^(+) desolvation.Here,we demonstrate that cyclopentylmethyl ether(CPME) based diluted high-concentration electrolyte(DHCE)enables-60℃ LMBs operation.By leveraging the loose coordination between Li^(+) and CPME,such developed electrolyte boosts the formation of ion clusters to derive anion-dominant interfacial chemistry for enhancing LMA compatibility and greatly accelerates Li^(+) desolvation kinetics.The resulting electrolyte demonstrates high Coulombic efficiencies(CE),providing over 99.5%,99.1%,98.5% and 95% at 25,-20,-40,and-60℃respectively.The assembled Li-S battery exhibits remarkable cyclic stability in-20,and-40℃ at 0.2 C charging and 0.5 C discharging.Even at-60℃,Li-S cell with this designed electrolyte retains> 70% of the initial capacity over 170 cycles.Besides,lithium metal coin cell and pouch cell with10 mg cm^(-2) high S cathode loading exhibit cycling stability at-20℃.This work offers an opportunity for rational designing electrolytes toward low temperature LMBs. 展开更多
关键词 Lithium metal batteries -60℃operation Lithium metal anode compatibility Li^(+) desolvation kinetics
下载PDF
The Popularization and Application of Cold Storage Red Blood Cells or Whole Blood at -80 ℃ of the Rh(D) Negative Patients in Surgical Operation 被引量:3
2
作者 YU Zhongqing(余忠清) +7 位作者 HU Lihua(胡丽华) Han Min(韩敏) RAO Shenzong(饶神宗) LUO Chengwei(罗成伟) 《Journal of Huazhong University of Science and Technology(Medical Sciences)》 SCIE CAS 2002年第2期155-157,共3页
Summary: The efficiency of cold storage red blood cells (CSRBC) or whole blood at -80 ℃ used in 27 Rh(D) negative patients during surgical operation was reported. The Rh(D) negative patients received the transfusion... Summary: The efficiency of cold storage red blood cells (CSRBC) or whole blood at -80 ℃ used in 27 Rh(D) negative patients during surgical operation was reported. The Rh(D) negative patients received the transfusion of CSRBC or whole blood stored at -80 ℃ for 180 to 360 days. The changes in the indexes, such as blood TB, DB, K +, Na +, BUN, Cr, urine protein (URPO), UOB, Hb, HCT, serum total protein, relative to hemolytic reaction and blood volume before and after transfusion were observed. The results showed that after transfusion of CSRBC or whole blood 27 cases were negative for urine protein and UOB, and the levels of BUN and Cr were normal (P>0.05). Blood TB, DB, Hb, and HCT were increased, while pH, blood K + and blood Na + was normal with the difference being not significant before and after operation (P>0.05). Plasma protein was decreased, but there was no significant difference before and after operation (P>0.05). It was suggested that CSRBC or whole blood at -80 ℃ could be safely infused to the Rh(D) negative patients without side effects during the surgical operation. 展开更多
关键词 Rh(D) negative patient -80 cold storage red blood cells surgical operation hemolytic reaction
下载PDF
X60管线钢在-20℃低温焊接的接头组织性能 被引量:4
3
作者 李建军 杜则裕 +1 位作者 刘光云 吕向阳 《焊接学报》 EI CAS CSCD 北大核心 2010年第12期93-96,共4页
结合X60管线钢在-20℃低温条件下的焊接施工实际情况进行了试验、测定及分析,研究了711 mm×15.9 mm管道环焊接头的力学性能、接头的金相组织、硬度、冲击吸收功以及冲击断口形貌等.结果表明,在-20℃低温条件下,焊接完成的X60管... 结合X60管线钢在-20℃低温条件下的焊接施工实际情况进行了试验、测定及分析,研究了711 mm×15.9 mm管道环焊接头的力学性能、接头的金相组织、硬度、冲击吸收功以及冲击断口形貌等.结果表明,在-20℃低温条件下,焊接完成的X60管线钢环焊接头力学性能测试;其HAZ的最大硬度值为210 HV10,符合相关技术标准.该工艺方案经过国内北部地区长输管道的工程使用,质量合格;经过金相显微组织分析,在X60钢-20℃条件下焊接的接头中,未发现淬硬组织;对冲击试件断口形貌的扫描电镜分析表明,该环焊接头的韧性满足相关技术标准的要求. 展开更多
关键词 X60管线钢 -20低温焊接 焊接接头性能
下载PDF
-30℃/-60℃复叠低温预冷设备的设计及实验 被引量:2
4
作者 习兰 刘秀芳 侯予 《低温工程》 CAS CSCD 北大核心 2009年第2期5-9,共5页
以研制工作在-30℃/-60℃温区的低温预冷设备为目标,自行设计和搭建了1个两级复叠式蒸气压缩制冷循环低温预冷设备,其中高温级循环采用R22作制冷剂,可以独立运行并在-30℃提供冷量;低温级循环采用R23作制冷剂,两级复叠运行时可在-60℃... 以研制工作在-30℃/-60℃温区的低温预冷设备为目标,自行设计和搭建了1个两级复叠式蒸气压缩制冷循环低温预冷设备,其中高温级循环采用R22作制冷剂,可以独立运行并在-30℃提供冷量;低温级循环采用R23作制冷剂,两级复叠运行时可在-60℃提供冷量。该低温预冷设备在低温级循环中加了1个回热器,在高温级循环辅助启动完成后,低温级循环可通过自身回热而独立运行并达到-60℃的制冷温度。 展开更多
关键词 两级复叠 单级运行 -30/-60
下载PDF
三文鱼在冰箱-18℃、-60℃条件下的冻藏品质变化研究 被引量:5
5
作者 董浩 周晓东 +2 位作者 鞠晓晨 钟明慧 赵元晖 《家电科技》 2020年第S01期170-174,共5页
通过TBA值、肌原纤维蛋白含量、菌落总数、感官评价、微观结构的测定,探究了三文鱼在冰箱-18℃、-60℃冷冻条件下贮藏56 d的品质变化。结果表明,随着冻藏时间的延长,三文鱼各项指标均发生显著变化。相较-18℃,-60℃冻藏能够明显延缓脂... 通过TBA值、肌原纤维蛋白含量、菌落总数、感官评价、微观结构的测定,探究了三文鱼在冰箱-18℃、-60℃冷冻条件下贮藏56 d的品质变化。结果表明,随着冻藏时间的延长,三文鱼各项指标均发生显著变化。相较-18℃,-60℃冻藏能够明显延缓脂肪氧化、降低肌原纤维蛋白的降解速率及抑制微生物的生长繁殖,更好的维持三文鱼的原有风味及品质。 展开更多
关键词 三文鱼 -60 冻藏
下载PDF
皱纹盘鲍在-18℃、-60℃条件下的冻藏品质变化研究
6
作者 董浩 密鑫宇 +2 位作者 鞠晓晨 王海燕 赵元晖 《家电科技》 2022年第S01期267-271,共5页
通过汁液流失率、pH值、TBA值、肌原纤维蛋白含量、羰基含量、菌落总数、质构和感官评价等测定,探究了皱纹盘鲍在-18℃、-60℃冷冻条件下贮藏56天的品质变化。结果表明,伴随冻藏时间延长,皱纹盘鲍的各项指标均发生显著变化。相比-18℃,... 通过汁液流失率、pH值、TBA值、肌原纤维蛋白含量、羰基含量、菌落总数、质构和感官评价等测定,探究了皱纹盘鲍在-18℃、-60℃冷冻条件下贮藏56天的品质变化。结果表明,伴随冻藏时间延长,皱纹盘鲍的各项指标均发生显著变化。相比-18℃,-60℃冻藏能够明显延缓脂肪氧化、降低肌原纤维蛋白的降解速率及抑制微生物的生长繁殖,更好地维持皱纹盘鲍的原有风味及品质。 展开更多
关键词 皱纹盘鲍 -60 冻藏
下载PDF
Molecular Engineering Design for High-Performance Aqueous Zinc-Organic Battery 被引量:3
7
作者 Tianjiang Sun Weijia Zhang +1 位作者 Qingshun Nian Zhanliang Tao 《Nano-Micro Letters》 SCIE EI CAS CSCD 2023年第3期98-111,共14页
Novel small sulfur heterocyclic quinones(6a,16adihydrobenzo[b]naphtho[2′,3′:5,6][1,4]dithiino[2,3-i]thianthrene-5,7,9,14,16,18-hexaone(4S6Q)and benzo[b]naphtho[2′,3′:5,6][1,4]dithiino[2,3-i]thianthrene-5,9,14,18-t... Novel small sulfur heterocyclic quinones(6a,16adihydrobenzo[b]naphtho[2′,3′:5,6][1,4]dithiino[2,3-i]thianthrene-5,7,9,14,16,18-hexaone(4S6Q)and benzo[b]naphtho[2′,3′:5,6][1,4]dithiino[2,3-i]thianthrene-5,9,14,18-tetraone(4S4Q))are developed by molecule structural design method and as cathode for aqueous zincorganic batteries.The conjugated thioether(–S–)bonds as connected units not only improve the conductivity of compounds but also inhibit their dissolution by both extendedπ-conjugated plane and constructed flexible molecular skeleton.Hence,the Zn//4S6Q and Zn//4S4Q batteries exhibit satisfactory electrochemical performance based on 3.5 mol L-1(M)Zn(ClO4)2electrolyte.For instance,the Zn//4S6Q battery obtains 240 and 208.6 mAh g^(-1)of discharge capacity at 150 mA g^(-1)and 30 A g^(-1),respectively.The excellent rate capability is ascribed to the fast reaction kinetics.This system displays a superlong life of 20,000 cycles with no capacity fading at 3 A g^(-1).Additionally,the H+-storage mechanism of the 4S6Q compound is demonstrated by ex situ analyses and density functional theory calculations.Impressively,the battery can normally work at-60℃benefiting from the anti-freezing electrolyte and maintain a high discharge capacity of 201.7 mAh g^(-1),which is 86.2%of discharge capacity at 25℃.The cutting-edge electrochemical performances of these novel compounds make them alternative electrode materials for Zn-organic batteries. 展开更多
关键词 Aqueous Zn-organic battery Small sulfur heterocyclic quinones Conjugated thioether skeleton Superlong cycling life H+-involved mechanism -60
下载PDF
超低温球墨铸铁件的生产过程控制及技术研究
8
作者 朱正锋 喻光远 +2 位作者 封雪平 穆彦青 邓晗 《铸造》 北大核心 2023年第12期1636-1641,共6页
介绍了2种-40℃超低温球墨铸铁QT400-18L和QT500-7L产品的铸造工艺、造型工艺、熔炼工艺及量产质量控制等生产过程的关键控制工序。-40℃超低温球铁铸件综合成品率可以稳定控制在92%以上。在-40℃超低温球铁基础上,进一步研究了硅、锰... 介绍了2种-40℃超低温球墨铸铁QT400-18L和QT500-7L产品的铸造工艺、造型工艺、熔炼工艺及量产质量控制等生产过程的关键控制工序。-40℃超低温球铁铸件综合成品率可以稳定控制在92%以上。在-40℃超低温球铁基础上,进一步研究了硅、锰、磷及硫对-60℃超低温球铁冲击韧性的影响,并对影响规律进行了分析。 展开更多
关键词 -60超低温 铸造工艺 低温球铁 冲击韧性
下载PDF
耐高低温耐压橡胶弹性材料 被引量:5
9
作者 余惠琴 刘晓红 +2 位作者 张金明 景宽 陈雯 《宇航材料工艺》 CAS CSCD 北大核心 2014年第3期42-45,共4页
采用丁异戊橡胶作为主体材料,从补强体系、硫化体系和增塑剂三个方面分析了它们对橡胶高低温性能、耐老化性能和耐压性能的影响.粒径小、结构度高的炭黑和气相白炭黑并用可有效改善橡胶的力学性能;硫磺含量在0.8% ~1.3%使得硫化橡胶... 采用丁异戊橡胶作为主体材料,从补强体系、硫化体系和增塑剂三个方面分析了它们对橡胶高低温性能、耐老化性能和耐压性能的影响.粒径小、结构度高的炭黑和气相白炭黑并用可有效改善橡胶的力学性能;硫磺含量在0.8% ~1.3%使得硫化橡胶既具备较好的高低温性能又兼顾较好的耐老化性能;增塑剂可有效调整橡胶硬度和耐压性能.并对研制的丁异戊橡胶弹性材料及其柔性接头构件耐高低温性能及耐压性能进行分析.结果表明,弹性材料高低温剪切性能及耐压性能表征结果能初步反映柔性接头构件的摆动性能及耐压性能. 展开更多
关键词 丁异戊橡胶 补强剂 硫化体系 -40 ~ +60 压缩
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部