Low-temperature,ambient processing of high-quality CsPbBr_(3)films is demanded for scalable production of efficient,low-cost carbon-electrode perovskite solar cells(PSCs).Herein,we demonstrate a crystal orientation en...Low-temperature,ambient processing of high-quality CsPbBr_(3)films is demanded for scalable production of efficient,low-cost carbon-electrode perovskite solar cells(PSCs).Herein,we demonstrate a crystal orientation engineering strategy of PbBr_(2)precursor film to accelerate its reaction with CsBr precursor during two-step sequential deposition of CsPbBr_(3)films.Such a novel strategy is proceeded by adding CsBr species into PbBr_(2)precursor,which can tailor the preferred crystal orientation of PbBr_(2)film from[020]into[031],with CsBr additive staying in the film as CsPb_(2)Br_(5)phase.Theoretical calculations show that the reaction energy barrier of(031)planes of PbBr_(2)with CsBr is lower about 2.28 eV than that of(O2O)planes.Therefore,CsPbBr_(3)films with full coverage,high purity,high crystallinity,micro-sized grains can be obtained at a low temperature of 150℃.Carbon-electrode PSCs with these desired CsPbBr_(3)films yield the record-high efficiency of 10.27%coupled with excellent operation stability.Meanwhile,the 1 cm^(2)area one with the superior efficiency of 8.00%as well as the flexible one with the champion efficiency of 8.27%and excellent mechanical bending characteristics are also achieved.展开更多
A method to promote aluminum hydroxide crystal growth through pickling Al(OH)_(3)as seed in the ammonia system was proposed to overcome these defects.The experimental results show that,under the conditions of pickling...A method to promote aluminum hydroxide crystal growth through pickling Al(OH)_(3)as seed in the ammonia system was proposed to overcome these defects.The experimental results show that,under the conditions of pickling time of 15 min,the acid concentration of 10%,the addition of 70 g/L pickling-Al(OH)_(3)seed,and the coarse granular Al(OH)_(3)products(d0.5=85.667)can be obtained.The characterization results show that the phase of the product is gibbsite,consistent with the seed.Moreover,the steps and ledges can be formed on pickling Al(OH)_(3)seed surface under the ammonia system,effectively promoting crystal growth.During crystal growth,the roughness of the crystal surface was first increased and then decreased,and the lamellar structure was deposited on the crystal seed surface.The final particles are approximately round,the surface is compact and dense.The growth of the product is surface reaction controlled.In addition,the content of the AlO_(6)unit is increased and contributed to Al(OH)_(3)crystal growth.展开更多
The proper bandgap and exceptional photostability enable CsPbI_(3) as a potential candidate for indoor photovoltaics(IPVs),but indoor power conversion efficiency(PCE) is impeded by serious nonradiative recombination s...The proper bandgap and exceptional photostability enable CsPbI_(3) as a potential candidate for indoor photovoltaics(IPVs),but indoor power conversion efficiency(PCE) is impeded by serious nonradiative recombination stemming from challenges in incomplete DMAPbI_(3) conversion and lattice structure distortion.Here,the coplanar symmetric structu re of hexyl sulfide(HS) is employed to functionalize the CsPbI_(3) layer for fabricating highly efficient IPVs.The hydrogen bond between HS and DMAI promotes the conversion of DMAPbI_(3) to CsPbI_(3),while the copianar symmetric structure enhances crystalline order.Simultaneously,surface sulfidation during HS-induced growth results in the in situ formation of PbS,spontaneously creating a CsPbI_(3) N-P homojunction to enhance band alignment and carrier mobility.As a result,the CsPbI_(3)&HS devices achieve an impressive indoor PCE of 39.90%(P_(in):334.6 μW cm^(-2),P_(out):133.5 μW cm^(-2)) under LED@2968 K,1062 lux,and maintain over 90% initial PCE for 800 h at ^(3)0% air ambient humidity.展开更多
Organic light-emitting diodes(OLEDs)have important applications in the field of next-generation displays and lighting,and phosphorescent iridium complexes are an important class of electroluminescent phosphorescent ma...Organic light-emitting diodes(OLEDs)have important applications in the field of next-generation displays and lighting,and phosphorescent iridium complexes are an important class of electroluminescent phosphorescent materials.In this paper,Ir(bmppy)_(3),tris(4-methyl-2,5-diphenylpyridine)iridium,was synthesized and elvaluted for photo-physical characteristics.Single crystals suitale for X-ray diffraction(XRD)were grown from a mixture solvent of dichloromethane and absolute ethanol.The composition and structur of Ir(bmppy)_(3)were determined by element analysis,NMR spectra and XRD.The complex crystallizes in the monoclinic symmetry with the space group P21/c with a slightly distorted octahedral configuration.As measured by UV-Visible and photoluminescence spectra,Ir(bmppy)_(3) displays a maximum emission at at 527 nm at ambient temperature,a typical green-emitting profile.The complex has potential for application in the OLED industry.展开更多
In the traditional process, m-phenylenediamine reacts with fuming sulfuric acid at high temperature to get intermediates, and then after dehydration occurs intramolecular rearrangement to get 2,4-diaminobenzenesulfoni...In the traditional process, m-phenylenediamine reacts with fuming sulfuric acid at high temperature to get intermediates, and then after dehydration occurs intramolecular rearrangement to get 2,4-diaminobenzenesulfonic acid. Traditional methods need to consume a lot of fuming sulfuric acid or concentrated sulfuric acid, resulting in high industrial large-scale production cost, more waste, and posing a serious environmental pollution risk. In this thesis, three different sulfonation reagents were used for the sulfonation reaction of m-phenylenediamine, and the reaction mechanisms and crystal structures of the three pathways were investigated. The three routes are: 1) one-step synthesis of monosulfonated compound 1 from raw material and sulfur trioxide (SO<sub>3</sub>);2) rapid reaction of raw material and chlorosulfonic acid to synthesize bisulfonated compound 2;3) direct eutectic crystallization of raw material and ordinary sulfuric acid to obtain compound 3. The crystal structure of the compounds synthesized by three paths was analyzed by X-ray single crystal diffraction, and compound 1 was characterized by NMR, Fourier infrared spectra, UV-visible spectrum and Mass spectrometry. The one-step synthesis of SO<sub>3</sub> as a sulfonation reagent has the advantages of mild reaction conditions, simple operation and low cost.展开更多
The domain reversal characteristics of near-stoichiometric LiNbO3 ([Li]/[Li+Nb]=0.496) single crystals, which are grown by the Czochralski method with K2O tlux, are investigated. The switch tield for 180° ferroel...The domain reversal characteristics of near-stoichiometric LiNbO3 ([Li]/[Li+Nb]=0.496) single crystals, which are grown by the Czochralski method with K2O tlux, are investigated. The switch tield for 180° ferroelectric domain reversal in the near-stoichiometric LiNbO3 crystal is 8.0±0.5kV/mm, which is only one third of the switching field required for the congruent LiNbO3 crystals. We have successfully achieved 180° domain reversal in near-stoichiometric LiNbO3 samples of 1.0mm thickness.展开更多
Adding Na_(2)CO_(3) to the NaHCO_(3) cooling crystallizer, using the common ion effect to promote crystallization and improve product morphology, is a new process recently proposed in the literature. However, the mech...Adding Na_(2)CO_(3) to the NaHCO_(3) cooling crystallizer, using the common ion effect to promote crystallization and improve product morphology, is a new process recently proposed in the literature. However, the mechanism of the impact of Na_(2)CO_(3)on the crystal morphology is still indeterminate. In this work, the crystallization of NaHCO_(3)in water and Na_(2)CO_(3)–NaHCO_(3) aqueous solution was investigated by experiments and molecular dynamics simulations(MD). The crystallization results demonstrate that the morphology of NaHCO_(3) crystal changed gradually from needle-like to flake structure with the addition of Na_(2)CO_(3). The simulation results indicate that the layer docking model and the modified attachment energy formula without considering the roughness of crystal surface can obtain the crystal morphology in agreement with the experimental results, but the lower molecules of the crystal layer have to be fixed during MD. Thermodynamic calculation of the NaHCO_(3) crystallization process verifies that the common ion effect from Na^(+)and the ionization equilibrium transformation from CO_(3)^(2-) jointly promote the precipitation of NaHCO_(3) crystal. The radial distribution function analysis indicates that the oxygen atoms of Na_(2)CO_(3) formed strong hydrogen bonds with the hydrogen atoms of the(0 1 1) face, which weakened the hydration of water molecules at the crystal surface, resulting in a significant change in the attachment energy of this crystal surface. In addition, Na+and CO_(3)^(2-) are more likely to accumulate on the(011) face,resulting in the fastest growth rate on this crystal surface, which eventually leads to a change in crystal morphology from needle-like to flake-like.展开更多
Low-dimensional halide perovskites have become the most promising candidates for X-ray imaging,yet the issues of the poor chemical stability of hybrid halide perovskite,the high poisonousness of lead halides and the r...Low-dimensional halide perovskites have become the most promising candidates for X-ray imaging,yet the issues of the poor chemical stability of hybrid halide perovskite,the high poisonousness of lead halides and the relatively low detectivity of the lead-free halide perovskites which seriously restrain its commercialization.Here,we developed a solution inverse temperature crystal growth(ITCG)method to bring-up high quality Cs_(3)Cu_(2)I_(5)crystals with large size of centimeter order,in which the oleic acid(OA)is introduced as an antioxidative ligand to inhibit the oxidation of cuprous ions effieiently,as well as to decelerate the crystallization rate remarkalby.Based on these fine crystals,the vapor deposition technique is empolyed to prepare high quality Cs_(3)Cu_(2)I_(5)films for efficient X-ray imaging.Smooth surface morphology,high light yields and short decay time endow the Cs_(3)Cu_(2)I_(5)films with strong radioluminescence,high resolution(12 lp/mm),low detection limits(53 nGyair/s)and desirable stability.Subsequently,the Cs_(3)Cu_(2)I_(5)films have been applied to the practical radiography which exhibit superior X-ray imaging performance.Our work provides a paradigm to fabricate nonpoisonous and chemically stable inorganic halide perovskite for X-ray imaging.展开更多
Based on the theory of crystallization,a solvent-free solid-liquid phase crystallization method called solid-melt crystallization was designed to prepare energetic coordination polymers.Two target compounds[Cu(NPyz)_(...Based on the theory of crystallization,a solvent-free solid-liquid phase crystallization method called solid-melt crystallization was designed to prepare energetic coordination polymers.Two target compounds[Cu(NPyz)_(4)NO_(3)]·NO_(3)(ECPs-1)and Cu(NPyz)_(4)(ClO_(4))_(2)(ECCs-2)were prepared through programmed heating and cooling by using 4-nitropyrazole(NPyz),(Cu(NO_(3))_(2)·5H_(2)O and Cu(ClO_(4))_(2)·5H_(2)O) as raw materials.In addition,crystallization pre-experiments and annealing experiments also verified the feasibility of the method.Their structures were confirmed by IR,elemental analysis,single-crystal X-ray diffraction and powder X-ray diffraction.The physicochemical properties and sensitivity test results showed that ECCs-2 has better thermal stability(T_(d)=221℃),while ECPs-1 is less sensitive to mechanical stimuli(IS=12 J,FS=240 N).Calculations based on EXPLO5 and the Kamlet-Jacobs equation showed that ECCs-2 has more considerable detonation performance(P=25.2 GPa,D=7.5 km/s).In comparison,the more intuitive results from the HN test,flame test,thermal resistance test and lead plate explosion test revealed that ECCs-2 has an“acceptable”detonation performance.The laser detonation test also showed that ECCs-2 is a promising excellent laser detonation material(E=408 mJ,P=24 W,τ=17 ms).展开更多
The effect of substitution La_(2)O_(3)and YF_(3)as network modifiers respectively for Y_(2)O_(3),and ZnO as intermediate oxide for Al_(2)O_(3)on crystallization and viscous behavior of Y_(2)O_(3)-Al_(2)O_(3)-SiO_(2)gl...The effect of substitution La_(2)O_(3)and YF_(3)as network modifiers respectively for Y_(2)O_(3),and ZnO as intermediate oxide for Al_(2)O_(3)on crystallization and viscous behavior of Y_(2)O_(3)-Al_(2)O_(3)-SiO_(2)glass was studied.La_(2)O_(3)and YF_(3)substitution for Y_(2)O_(3)decreases the melting temperature of studied glass from 1402 to 1346 and 1379℃,and the activation energy of viscous flow decreases from 340 to 250 and 265 kJ/mol.Meanwhile,ZnO substitution for Al_(2)O_(3)decreases the melting temperature to 1379℃while increases the activation energy of viscous flow to 542 kJ/mol,due to their different role in glass structure.Substitution ZnO for Al_(2)O_(3)refines and homogenizes the crystals size and lowers crystallinity because the nucleation and crystal growth are depressed by higher activation energy of crystallization and change of crystallization mechanism from bulk crystallization to surface crystallization.Replacement of Y_(2)O_(3)by La_(2)O_(3)and YF_(3)respectively also decreases the crystallinity of Y_(2)O_(3)-Al_(2)O_(3)-SiO_(2)glass ceramic due to competitive and hindering effect on the rearranged atoms,structural units and groups required by precipitated two crystals.Besides,y-Y2Si2O7,precipitation of Y4.67(SiO4)3O,ZnAl_(2)O_(4),and Y3Si3O10F were observed respectively due to incorporation of La_(2)O_(3),ZnO,and YF_(3).展开更多
The maximum velocity of a mobile vortex in movement is generally limited by the phenomenon of flux-flow instability(FFI),which necessitates weak vortex pinning and fast heat removal from non-equilibrium electrons.We h...The maximum velocity of a mobile vortex in movement is generally limited by the phenomenon of flux-flow instability(FFI),which necessitates weak vortex pinning and fast heat removal from non-equilibrium electrons.We here demonstrate exfoliations and nano-fabrications of Bi_(2)Sr_(2)Ca_(2)Cu_(3)O_(10+δ) crystalline nanostrips,which possess a rather weak pinning volume of vortices,relatively low resistivity,and large normal electron diffusion coefficient.The deduced vortex velocity in Bi_(2)Sr_(2)Ca_(2)Cu_(3)O_(10+δ) crystalline nanostrips can be up to 300 km/s near the superconducting transition temperature,well above the speed of sound.The observed vortex velocity is an order of magnitude faster than that of conventional superconducting systems,representing a perfect platform for exploration of ultra-fast vortex matter and a good candidate for fabrications of superconducting nanowire single photon detectors or superconducting THz modulator.展开更多
基金the financial support from the National Key R&D program of China(2021YFF0500501 and 2021YFF0500504)the Fundamental Research Funds for the Central Universities(YJS2213 and JB211408)+1 种基金the National Natural Science Foundation of China(61874083)the Joint Research Funds of Department of Science&Technology of Shaanxi Province and Northwestern Polytechnical University(No.2020GXLH-Z-014)
文摘Low-temperature,ambient processing of high-quality CsPbBr_(3)films is demanded for scalable production of efficient,low-cost carbon-electrode perovskite solar cells(PSCs).Herein,we demonstrate a crystal orientation engineering strategy of PbBr_(2)precursor film to accelerate its reaction with CsBr precursor during two-step sequential deposition of CsPbBr_(3)films.Such a novel strategy is proceeded by adding CsBr species into PbBr_(2)precursor,which can tailor the preferred crystal orientation of PbBr_(2)film from[020]into[031],with CsBr additive staying in the film as CsPb_(2)Br_(5)phase.Theoretical calculations show that the reaction energy barrier of(031)planes of PbBr_(2)with CsBr is lower about 2.28 eV than that of(O2O)planes.Therefore,CsPbBr_(3)films with full coverage,high purity,high crystallinity,micro-sized grains can be obtained at a low temperature of 150℃.Carbon-electrode PSCs with these desired CsPbBr_(3)films yield the record-high efficiency of 10.27%coupled with excellent operation stability.Meanwhile,the 1 cm^(2)area one with the superior efficiency of 8.00%as well as the flexible one with the champion efficiency of 8.27%and excellent mechanical bending characteristics are also achieved.
基金Funded by the National Natural Science Foundation of China(No.51974188)the Liaoning Revitalization Talents Program(No.XLYC2008014)。
文摘A method to promote aluminum hydroxide crystal growth through pickling Al(OH)_(3)as seed in the ammonia system was proposed to overcome these defects.The experimental results show that,under the conditions of pickling time of 15 min,the acid concentration of 10%,the addition of 70 g/L pickling-Al(OH)_(3)seed,and the coarse granular Al(OH)_(3)products(d0.5=85.667)can be obtained.The characterization results show that the phase of the product is gibbsite,consistent with the seed.Moreover,the steps and ledges can be formed on pickling Al(OH)_(3)seed surface under the ammonia system,effectively promoting crystal growth.During crystal growth,the roughness of the crystal surface was first increased and then decreased,and the lamellar structure was deposited on the crystal seed surface.The final particles are approximately round,the surface is compact and dense.The growth of the product is surface reaction controlled.In addition,the content of the AlO_(6)unit is increased and contributed to Al(OH)_(3)crystal growth.
基金financial support from the Natural Science Foundation of Guizhou Province (Grant No. ZK 2024-087)Natural Science Foundation of China (no. 22005071)。
文摘The proper bandgap and exceptional photostability enable CsPbI_(3) as a potential candidate for indoor photovoltaics(IPVs),but indoor power conversion efficiency(PCE) is impeded by serious nonradiative recombination stemming from challenges in incomplete DMAPbI_(3) conversion and lattice structure distortion.Here,the coplanar symmetric structu re of hexyl sulfide(HS) is employed to functionalize the CsPbI_(3) layer for fabricating highly efficient IPVs.The hydrogen bond between HS and DMAI promotes the conversion of DMAPbI_(3) to CsPbI_(3),while the copianar symmetric structure enhances crystalline order.Simultaneously,surface sulfidation during HS-induced growth results in the in situ formation of PbS,spontaneously creating a CsPbI_(3) N-P homojunction to enhance band alignment and carrier mobility.As a result,the CsPbI_(3)&HS devices achieve an impressive indoor PCE of 39.90%(P_(in):334.6 μW cm^(-2),P_(out):133.5 μW cm^(-2)) under LED@2968 K,1062 lux,and maintain over 90% initial PCE for 800 h at ^(3)0% air ambient humidity.
文摘Organic light-emitting diodes(OLEDs)have important applications in the field of next-generation displays and lighting,and phosphorescent iridium complexes are an important class of electroluminescent phosphorescent materials.In this paper,Ir(bmppy)_(3),tris(4-methyl-2,5-diphenylpyridine)iridium,was synthesized and elvaluted for photo-physical characteristics.Single crystals suitale for X-ray diffraction(XRD)were grown from a mixture solvent of dichloromethane and absolute ethanol.The composition and structur of Ir(bmppy)_(3)were determined by element analysis,NMR spectra and XRD.The complex crystallizes in the monoclinic symmetry with the space group P21/c with a slightly distorted octahedral configuration.As measured by UV-Visible and photoluminescence spectra,Ir(bmppy)_(3) displays a maximum emission at at 527 nm at ambient temperature,a typical green-emitting profile.The complex has potential for application in the OLED industry.
文摘In the traditional process, m-phenylenediamine reacts with fuming sulfuric acid at high temperature to get intermediates, and then after dehydration occurs intramolecular rearrangement to get 2,4-diaminobenzenesulfonic acid. Traditional methods need to consume a lot of fuming sulfuric acid or concentrated sulfuric acid, resulting in high industrial large-scale production cost, more waste, and posing a serious environmental pollution risk. In this thesis, three different sulfonation reagents were used for the sulfonation reaction of m-phenylenediamine, and the reaction mechanisms and crystal structures of the three pathways were investigated. The three routes are: 1) one-step synthesis of monosulfonated compound 1 from raw material and sulfur trioxide (SO<sub>3</sub>);2) rapid reaction of raw material and chlorosulfonic acid to synthesize bisulfonated compound 2;3) direct eutectic crystallization of raw material and ordinary sulfuric acid to obtain compound 3. The crystal structure of the compounds synthesized by three paths was analyzed by X-ray single crystal diffraction, and compound 1 was characterized by NMR, Fourier infrared spectra, UV-visible spectrum and Mass spectrometry. The one-step synthesis of SO<sub>3</sub> as a sulfonation reagent has the advantages of mild reaction conditions, simple operation and low cost.
基金Supported by the National Advanced Material Committee(grant 863-715-001-0102)and special funding for the excellent young researchers from the National Natural Science Foundation of China under Grant No.69825108and National Education Ministry of China,“973”Project(grant 1999033004).
文摘The domain reversal characteristics of near-stoichiometric LiNbO3 ([Li]/[Li+Nb]=0.496) single crystals, which are grown by the Czochralski method with K2O tlux, are investigated. The switch tield for 180° ferroelectric domain reversal in the near-stoichiometric LiNbO3 crystal is 8.0±0.5kV/mm, which is only one third of the switching field required for the congruent LiNbO3 crystals. We have successfully achieved 180° domain reversal in near-stoichiometric LiNbO3 samples of 1.0mm thickness.
基金supported by the National Natural Science Foundation of China (21878143)the Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD)。
文摘Adding Na_(2)CO_(3) to the NaHCO_(3) cooling crystallizer, using the common ion effect to promote crystallization and improve product morphology, is a new process recently proposed in the literature. However, the mechanism of the impact of Na_(2)CO_(3)on the crystal morphology is still indeterminate. In this work, the crystallization of NaHCO_(3)in water and Na_(2)CO_(3)–NaHCO_(3) aqueous solution was investigated by experiments and molecular dynamics simulations(MD). The crystallization results demonstrate that the morphology of NaHCO_(3) crystal changed gradually from needle-like to flake structure with the addition of Na_(2)CO_(3). The simulation results indicate that the layer docking model and the modified attachment energy formula without considering the roughness of crystal surface can obtain the crystal morphology in agreement with the experimental results, but the lower molecules of the crystal layer have to be fixed during MD. Thermodynamic calculation of the NaHCO_(3) crystallization process verifies that the common ion effect from Na^(+)and the ionization equilibrium transformation from CO_(3)^(2-) jointly promote the precipitation of NaHCO_(3) crystal. The radial distribution function analysis indicates that the oxygen atoms of Na_(2)CO_(3) formed strong hydrogen bonds with the hydrogen atoms of the(0 1 1) face, which weakened the hydration of water molecules at the crystal surface, resulting in a significant change in the attachment energy of this crystal surface. In addition, Na+and CO_(3)^(2-) are more likely to accumulate on the(011) face,resulting in the fastest growth rate on this crystal surface, which eventually leads to a change in crystal morphology from needle-like to flake-like.
基金the financially support of the National Natural Science Foundation of China(12164051)the Joint Foundation of Provincial Science and Technology Department-Double First-class Construction of Yunnan University(2019FY003016)+4 种基金the Young Top Talent Project of Yunnan Province(YNWR-QNBJ-2018-229)the financially support by Yunnan Major Scientific and Technological Projects(202202AG050016)Advanced Analysis and Measurement Center of Yunnan University for the sample characterization service and the Postgraduate Research and Innovation Foundation of Yunnan University(2021Y036)the financially support of the National Natural Science Foundation of China(62064013)the Application Basic Research Project of Yunnan Province[2019FB130]。
文摘Low-dimensional halide perovskites have become the most promising candidates for X-ray imaging,yet the issues of the poor chemical stability of hybrid halide perovskite,the high poisonousness of lead halides and the relatively low detectivity of the lead-free halide perovskites which seriously restrain its commercialization.Here,we developed a solution inverse temperature crystal growth(ITCG)method to bring-up high quality Cs_(3)Cu_(2)I_(5)crystals with large size of centimeter order,in which the oleic acid(OA)is introduced as an antioxidative ligand to inhibit the oxidation of cuprous ions effieiently,as well as to decelerate the crystallization rate remarkalby.Based on these fine crystals,the vapor deposition technique is empolyed to prepare high quality Cs_(3)Cu_(2)I_(5)films for efficient X-ray imaging.Smooth surface morphology,high light yields and short decay time endow the Cs_(3)Cu_(2)I_(5)films with strong radioluminescence,high resolution(12 lp/mm),low detection limits(53 nGyair/s)and desirable stability.Subsequently,the Cs_(3)Cu_(2)I_(5)films have been applied to the practical radiography which exhibit superior X-ray imaging performance.Our work provides a paradigm to fabricate nonpoisonous and chemically stable inorganic halide perovskite for X-ray imaging.
基金the projects of National Natural Science Foundation of China(Grant Nos.22175025 and 21905023)for their generous financial support.
文摘Based on the theory of crystallization,a solvent-free solid-liquid phase crystallization method called solid-melt crystallization was designed to prepare energetic coordination polymers.Two target compounds[Cu(NPyz)_(4)NO_(3)]·NO_(3)(ECPs-1)and Cu(NPyz)_(4)(ClO_(4))_(2)(ECCs-2)were prepared through programmed heating and cooling by using 4-nitropyrazole(NPyz),(Cu(NO_(3))_(2)·5H_(2)O and Cu(ClO_(4))_(2)·5H_(2)O) as raw materials.In addition,crystallization pre-experiments and annealing experiments also verified the feasibility of the method.Their structures were confirmed by IR,elemental analysis,single-crystal X-ray diffraction and powder X-ray diffraction.The physicochemical properties and sensitivity test results showed that ECCs-2 has better thermal stability(T_(d)=221℃),while ECPs-1 is less sensitive to mechanical stimuli(IS=12 J,FS=240 N).Calculations based on EXPLO5 and the Kamlet-Jacobs equation showed that ECCs-2 has more considerable detonation performance(P=25.2 GPa,D=7.5 km/s).In comparison,the more intuitive results from the HN test,flame test,thermal resistance test and lead plate explosion test revealed that ECCs-2 has an“acceptable”detonation performance.The laser detonation test also showed that ECCs-2 is a promising excellent laser detonation material(E=408 mJ,P=24 W,τ=17 ms).
基金the National Natural Science Foundation of China(No.51974168)the Science and Technology Major Project of Inner Mongolia Autonomous Region in China(Nos.2019ZD023 and 2021ZD0028)the State Key Laboratory of Silicate Materials for Architectures(Wuhan University of Technology)(No.SYSJJ2020-08)。
文摘The effect of substitution La_(2)O_(3)and YF_(3)as network modifiers respectively for Y_(2)O_(3),and ZnO as intermediate oxide for Al_(2)O_(3)on crystallization and viscous behavior of Y_(2)O_(3)-Al_(2)O_(3)-SiO_(2)glass was studied.La_(2)O_(3)and YF_(3)substitution for Y_(2)O_(3)decreases the melting temperature of studied glass from 1402 to 1346 and 1379℃,and the activation energy of viscous flow decreases from 340 to 250 and 265 kJ/mol.Meanwhile,ZnO substitution for Al_(2)O_(3)decreases the melting temperature to 1379℃while increases the activation energy of viscous flow to 542 kJ/mol,due to their different role in glass structure.Substitution ZnO for Al_(2)O_(3)refines and homogenizes the crystals size and lowers crystallinity because the nucleation and crystal growth are depressed by higher activation energy of crystallization and change of crystallization mechanism from bulk crystallization to surface crystallization.Replacement of Y_(2)O_(3)by La_(2)O_(3)and YF_(3)respectively also decreases the crystallinity of Y_(2)O_(3)-Al_(2)O_(3)-SiO_(2)glass ceramic due to competitive and hindering effect on the rearranged atoms,structural units and groups required by precipitated two crystals.Besides,y-Y2Si2O7,precipitation of Y4.67(SiO4)3O,ZnAl_(2)O_(4),and Y3Si3O10F were observed respectively due to incorporation of La_(2)O_(3),ZnO,and YF_(3).
基金supporting high quality of post growth treatment Bi_(2)Sr_(2)Ca_(2)Cu_(3)O_(10+δ)single crystalssupported by the National Key Research and Development Program of China(Grant No.2017YFA0304000)+4 种基金the National Natural Science Foundation of China(Grant Nos.61971408 and 61827823)Shanghai Municipal Science and Technology Major Project(Grant No.2019SHZDZX01)Shanghai Rising-Star Program(Grant No.20QA1410900)the Youth Innovation Promotion Association of Chinese Academy of Sciences(Grant Nos.2020241 and 2021230)the Natural Science Foundation of Shanghai(Grant No.19ZR1467400)。
文摘The maximum velocity of a mobile vortex in movement is generally limited by the phenomenon of flux-flow instability(FFI),which necessitates weak vortex pinning and fast heat removal from non-equilibrium electrons.We here demonstrate exfoliations and nano-fabrications of Bi_(2)Sr_(2)Ca_(2)Cu_(3)O_(10+δ) crystalline nanostrips,which possess a rather weak pinning volume of vortices,relatively low resistivity,and large normal electron diffusion coefficient.The deduced vortex velocity in Bi_(2)Sr_(2)Ca_(2)Cu_(3)O_(10+δ) crystalline nanostrips can be up to 300 km/s near the superconducting transition temperature,well above the speed of sound.The observed vortex velocity is an order of magnitude faster than that of conventional superconducting systems,representing a perfect platform for exploration of ultra-fast vortex matter and a good candidate for fabrications of superconducting nanowire single photon detectors or superconducting THz modulator.
