Some of the Chemical and Physical Characteristics of the Graff River in Kut City, Iraq

Some of the chemical and physical water qualities of the Graff River in the city of Kut were studied, and for two sites of the river, One was at the Crimea site, the other in the Jihad district, and for the period from October/2018 to March/2019, Seven variables of river water have been analyzed: temperature PH, electrical conductivity, TDS, turbidity, alkaline, and chloride. The results showed that most of the chemical and physical water properties of the river were in normal proportions and did not rise, except for the turbidity, which was at a very high level, and that the pH values were close to the basal side. The results of the statistical analysis revealed positive significant relationships between the pH and (chloride and TDS). On the other hand, between electrical conductivity and both previous variables as well. And a negative significant connection between temperature and alkaline.

Physical and Chemical Properties of Horns Sheaths Particles for the Manufacture of Composite Materials

Salvaged cow horns from slaughterhouses have been transformed into fine particles for a physical characterization that has led us to determine the humidity rate (2.34% ± 0.054%), the actual density situated between 0.586 g/cm3 and 0.732 g/cm3, the swelling rate (12%), and one chemical characterization that permitted us to determine the rate of dry matters (97.05%), of mineral matters (2.5%), of protein matters (94.52%). From these weak values, it can easily be seen that cow horn case doesn’t absorb much water and improve the mechanical characteristics of the composite;the high rate of protein shows that keratin which is the structural molecule favors its gripping as reinforcing element in the manufacturing of composite materials.

Changing Rules of Physical and Chemical Properties of Eucalyptus uraphylla spp. Forest at Different Ages in Southwest Yunnan Province

[Objective] The aim was to study on changing rules of physical and chemical properties of Eucalyptus uraphylla spp. forest at different ages in Southwest of Yunnan Province. [Method] In the research, field survey and laboratory analysis were adopted to study on physical and chemical properties of soils for the Eucalyptus uraphylla spp. at the first cutting ages in Lancang County. [Result] With the increasing of forest ages, for physical properties of soils, soil bulk density was increasing, and soil structure became poor; water contents in soils and capillary porosity were improving, but total soil porosity and non-capillary porosity were decreasing. For chemical properties, pH of soil dropped, but soil acidity improved; organic matter, total N, hydrolysable nitrogen, available phosphorus, and available potassium all declined; exchangeable Ca and Mg were improving due to fertilization and Ca and Mg lower consumption. The results showed that plays important roles in water absorption of soils and vegetation growth were improved with age increase by Eucalyptus uraphylla spp. forest, but ventilation and fertility declined accordingly. [Conclusion] The research indicated that dry branches and fallen leaves should be preserved and nutrient cycling should be protected during introduction and management of Eucalyptus uraphylla spp. to guarantee the nutrients in dry branches and leaves are back to soils, providing theoretical references for management of forest plantation and environment protection.

Effects of Different Application Amounts of Potassium Fulvate on Yield and Quality of Tomato and Soil Physical and Chemical Properties

This study was conducted to study the optimum dosage of potassium ful- vate （PF） on greenhouse tomato, the effects of different amounts of PF on yield and quality of greenhouse tomato and soil physical and chemical properties were investigated by a field plot experiment. The results showed that the bottom applica- tion of PF increased tomato yield, plant dry matter weight and root dry matter weight by 14.0%, 14.4 and 50.6%, respectively; Vc and soluble sugar content of tomato increased by 1＆5% and 10.0%, respectively; and soil bulk density de- creased by 3.6%, and CEC increased by 5.0%. All the indexes increased with the increase of PF application amount, and reached the maximum value when the PF application rate was 4 500 kg/hm2. In consideration of the cost of fertilizer and all indexes, the optimum dosaqe of PF fertilizer was 4 500 kg/hm2.

Studies of Soil Physical Property on Different Abandoned Lands in the Minqin Oasis,Downstream of the Shiyang River

The vast area of farmland was abandoned at downstream of the Shiyang River because of decreased water recourse. To ensure the ecological safety of Minqin Oasis and to provide management basis for the abandoned land, soil physical properties were observed and studied. The authors analyzed land with abandonment time of 1 year, 2 years, 3 years, 4 years, 5 years, 8 years, 15 years, 24 years and 31 years. Samples were took at the 0-40 cm layer of soil to measure the bulk density, porosity and grain composition of soil in the different abandoned lands. Results showed that the tendency of clay content was decreasing, conversely, the fine sand increased at the layer of 0-10 cm of different abandoned lands.The changes of grain content reached a peak at the fourth year after the land was abandoned, then varied slightly. The variation of grain content of abandoned land was obvious with the extension of the abandonment year. The soil bulk density decreased and porosity increased with the extension of the abandonment year. The difference of porosity and soil bulk density at the range of 0-40 cm of different abandoned land decreased after the land abandoned for 3 years. The quality of soil was decreased, while the soil permeability was improved. The soil physical properties changed obviously in 3 to 4 years after abandonment, so it is the key time for land management.

Soil Physical and Chemical Properties of Five Subtropical Forests in Lingao of Hainan

With 5 types of typical forests as research object, the physical and chemical properties of different types of forests were analyzed by sample plot investigation method. The results showed that： the soil total porosity was the highest in the Casuarina equisetifolia forest （46.168%）, but the lowest in the Encalyptus robusta forest （39.46%）. The soil capillary porosity was the highest in the Acacia mangium forest （22.57%）, but the lowest in the secondary forest （18.95%）. The soil water content was the highest in the C. equisetifolia forest, with a mean value of 27.85%, but the lowest in the secondary forest, with a mean value of 4.34%. The soil pH values were in the range of 4.81-6.59, the soils in the A. mangium forest, C. equisetifolia forest and E. robusta forest were strongly acidic （pH 4.5-5.5）, and the soils in the secondary forest and C. nucifera forest were weakly acidic. The soils had organic matter contents in the range of 0.34-28.68 g/kg, and showed an order of A. mangium forest〉C. equisetifolia forest〉E. robusta forest〉secondary forest〉C. nucifera forest, with a decreasing trend with the soil depth increasing. The soil total N contents were in the range of 0.10-1.63 g/kg, the A. mangium forest showed the highest soil total N contents, while the C. nucifera forest exhibited the lowest soil total N contents; the soil total P contents were in the range of 0.21-1.74 g/kg, and the E. robusta forest had the highest soil total P contents; and the soil total K contents were in the range of 0.16-2.15 g/kg, and the A. mangium forest exhibited the highest soil total K contents. The soil available P contents were in the range of 0.98-132.46 mg/kg; and the secondary forests had the highest soil available P contents; and the soil rapidly available K contents were in the range of 3.03-27.35 mg/kg, and the C. nucifera forest exhibited the highest soil rapidly available K contents. The soil ammonium N contents were in the range of 1.38-5.15 mg/kg, and the nitrate N contents were in the range were in the range of 0.56 -3.51 mg/kg. The A. mangium forest showed the highest soil nitrate N contents （with a mean value of 2.29 mg/kg） and ammonium N contents （with a mean value of 3.93 mg/kg）. For the same forest type, with the increase of soil depth, the nitrate nitrogen and ammonium nitrogen content also showed a decreasing trend.

Changing Rule of Physical and Chemical Indicators of Sediment in Tilapia Aquaculture Ponds

To provide basic information for studying balancing mechanism of nutrition environment in aquaculture ponds, sediment samples were collected periodically during the breeding process of tilapia in ponds. Then various types of nutrient content of the samples were detected and the changing rule was summarized. The results showed that dry weight of the sediment and content of TP, TN and TOC generally presented a trend of first increasing and then decreasing. The main production period of each nutrient was from July to September and the production percentage was close to 80% of the total production. The content of NH4^＋-N increased gradually and reached a peak in early August, then maintained at the peak level. NO2^--N content of the sediment in each pond was basically the same in the earlier aquaculture stage and decreased in middle stage with a big difference, then rose again in the later stage.

Research on Physical and Chemical Properties of Corynebacterium glutamicum in Fermentation Process of the Glucose of Wheat Starch

[Objective] This study aimed to investigate the physical and chemical char- acteristic of Corynebacterium glutamicum in fermentation process of the glucose of wheat starch. [Method] The purity of glutamic acid in fermentation period, optical density and cell viability of bacteria were detected as indicators for regression com- parison and analysis. [Result] The relative error d=-3.316 6% within the experimental range of Warburg trace breathing apparatus and double function analyzer. The linear relationship was s1=（1-d）s2. During the fermentation process of the glucose of wheat starch, the average cell activity was 6.24 μA and the maximum cell activity was 6.61 μA. [Conclusion] Compared with optical density, cell viability can more accurate- ly reflect the physical and chemical properties of Corynebacterium glutamicum in fermentation process of the glucose of wheat starch. There was certain correlation between cell membrane phospholipids and cell viability.

Physical,mechanical and thermal properties of vacuum sintered HUST-1 lunar regolith simulant

Establishing a base on the Moon is one of the new goals of human lunar exploration in recent years.Sintered lunar regolith is one of the most potential building materials for lunar bases.The physical,mechanical and thermal properties of sintered lunar regolith are vital performance indices for the structural design of a lunar base and analysis of many critical mechanical and thermal issues.In this study,the HUST-1 lunar regolith simulant(HLRS)was sintered at 1030,1040,1050,1060,1070,and 1080℃.The effect of sintering temperature on the compressive strength was investigated,and the exact value of the optimum vacuum sintering temperature was determined between 1040 and 1060℃.Then,the microstructure and material composition of vacuum sintered HLRS at different temperatures were characterized.It was found that the sintering temperature has no significant effect on the mineral composition in the temperature range of 1030-1080℃.Besides,the heat capacity,thermal conductivity,and coefficient of thermal expansion(CTE)of vacuum sintered HLRS at different temperatures were investigated.Specific heat capacity of sintered samples increases with the increase of test temperature within the temperature range from-75 to 145℃.Besides,the thermal conductivity of the sintered sample is proportional to density.Finally,the two temperatures of 1040 and 1050℃were selected for a more detailed study of mechanical properties.The results showed that compressive strength of sintered sample is much higher than tensile strength.This study reveals the effects of sintering temperature on the physical,mechanical and thermal properties of vacuum sintered HLRS,and these material parameters will provide support for the construction of future lunar bases.

Classification and Distribution of Common Aroma Components in Tobacco Leaf Based on Their Physical and Chemical Properties

[Objective] This study was aimed to find a new method for the classification of common aroma components in tobacco leaves. [Method] Sixty-four common aroma components in tobacco leaves were classified by cluster analysis based on their relative molecular weight. The contents and distribution of aroma components in another 71 C3F and 64 B2F tobacco leaf samples were analyzed by using the new method. [Result] The 64 common aroma components were divided into three categories trough the cluster analysis based on their molecular weight. CategoryⅠ consisted of 12 aroma components which had high molecular weight（281.308±21.536on average） and high boiling point（371.311±29.904 ℃ on average）. Category Ⅱ included 27 components which had low molecular weight（103.722 ± 13.115 on average） and low boiling point（176.132±42.342 ℃ on average）. Category Ⅲ included 25components which had middle molecular weight（175.393 ± 24.906 on average） and middle boiling point（250.562±45.431 ℃ on average）. The content of high-molecularweight aroma components in middle leaves（547.344±224.391 μg/g） was much higher than that in upper leaves（477.549±182.066 μg/g）. The content of low-molecularweight aroma component in middle leaves（17.468±3.459 μg/g） was also significantly higher than that in upper leaves（15.936±3.456 μg/g）. The content of middle-molecular-weight aroma component in middle leaves（44.931 ±8.953 μg/g） was extremely significantly higher than that in upper leaves（37.997±6.042 μg/g）. [Conclusion] This study proposed a new way to classify the aroma components in flue-cured tobacco leaves using the relative molecular weight as the index, which will provide theoretical reference for developing special tobacco leaves.

Effects of Green Manure Mixed Cropping Patterns on Physical and Chemical Properties of Soil and Economic Characters of Flue-cured Tobacco

[Objective] The aim was to clear the suitable green manure cropping pat- terns in Xiangxi tobacco-planting areas. [Method] 8 treatments were set to study the effects of the monoculture and mixed cropping of common vetch （Vicia gigantea Bge.）, perennial ryegrass （Lofium） and rapeseed （Brassica campestris L.） on physi- cal and chemical properties of soil and economic characters of flue-cured tobacco. [Result] （1） Green manure turnover can reduce soil bulk density by 1.08%-8.62%, and the effect of green manure mixed cropping pattern was the best. （2） Green manure turnover also can increase the soil nutrient, soil organic matter, total nitro- gen （N）, total phosphorus （P）, total potassium （K）, alkali-hydrolyzale N, rapidly available P and rapidly available K by 1.44%-6.10%, 0.01-0.12 g/kg, 1.89%- 11.32%, 0.12%-3.56%, 1.06%-11.76%, 0.04%-18.93% and 0.98%-23.12%, respec- tively, and the effect of the monoculture of common vetch was the best.（3） The overall change of soil pH was not obvious.（4）Green manure turnover can increase the yield and output of flue-cured tobacco, and the effect of the monoculture of common vetch was the best. [Conclusion] The monoculture of common vetch can be generalized in the dry land of Xiangxi tobacco-planting areas.

Physical and mechanical properties and microstructures of submarine soils in the Yellow Sea

In recent years,the exploration of seabed has been intensified,but the submarine soils of silt and sand in the Yellow Sea area have not been well investigated so far.In this study,the physical and mechanical properties of silt and sand from the Yellow Sea were measured using a direct shear apparatus and their microstructures were observed using a scanning electron microscope.The test results suggest that the shear strength of silt and sand increases linearly with the increase of normal stress.Based on the direct shear test,the scanning electron microscope was used to observe the section surface of sand.It is observed that the section surface becomes rough,with many“V”‐shaped cracks.Many particles appear on the surface of the silt structure and tend to be disintegrated.The X‐ray diffraction experiment reveals that the sand and silt have different compositions.The shear strength of sand is slightly greater than that of silt under high stress,which is related to the shape of soil particles and the mineral composition.These results can be a reference for further study of other soils in the Yellow Sea;meanwhile,they can serve as soil parameters for the stability and durability analyses of offshore infrastructure construction.

Effect of fire severity on physical and biochemical soil properties in Zagros oak(Quercus brantii Lindl.)forests in Iran

Fire affects the physical and chemical properties and soil biological activity of natural ecosystems. This study was conducted in the Miyan Tang region, Ilam Province in western Iran. The study site was 110 hectares, where we sampled soils in areas that were classified by fire severity： low （LS）, high （HS） and medium severity （MS）, and unburned （UB）, which served as the control. In each severity class, 25 transect points were randomly selected for measurement. Around each transect plot center, 3 soil samples were selected randomly and soils collected from the 0 to 20 cm depth were combined into a composite sample that was used in laboratory analysis to represent conditions at that point. Plots in the UB and LS fire classes had similar soil conditions and had higher values of factors such as saturated moisture, organic carbon, carbon dioxide, and silt and clay content. In contrast, plots in the HS and MS fire severity classes were clustered in the positive direction along the first axis that represented gradients in soil acidity, electrical conductivity, cation exchange capacity, accessible phosphorus, accessible potassium, bulk density, and sand. Soil attributes were similar in areas of HS and MS fire severity classes, whereas soil conditions in the LS class and UB controls were most similar. Fire in the LS areas either did not significantly alter the physicalchemical soil properties and microbial basal respiration, or soils were able to recover quickly after being burned.

Effect of grinding on chemical and physical properties of rice husk ash

The effect of grinding on the chemical and physical properties of rice husk ash was studied. Four rice husk ashes with different finenesses, i.e. coarse original rice husk ash （RHA0）, RHA1, RHA2, and RHA3 were used for the study. Ordinary Portland cement （OPC） was partially replaced with rice husk ash at 20% by weight of binder. The water to binder ratio （W/B） of the mortar was maintained at 110%±5% with flow table test. Specific gravity, fineness, chemical properties, compressive strength, and porosity test of mortars were determined. The differences in chemical composition of the rice husk ashes with different finenesses from the same batch are small. The use of RHA3 produces the mortars with good strength and low porosity. The strength of the mortar improves with partial replacement of RHA3 in comparison with normal coarse rice husk ash. The use of RHA3 results in a strong and dense mortar, which is due to the better dispersion and filling effect, as well as an increase in the pozzolanic reaction.

Recent progress on confinement of polysulfides through physical andchemical methods

With high theoretical energy density and the natural abundance of S, lithium-sulfur （Li-S） batteries areconsidered to be the promising next generation high-energy rechargeable energy storage devices. How-ever, issues including electronical insulation of S, the lithium polysulfides （LiPSs） dissolution and the shortcycle lifespan have prevented Li-S batteries from being practical applied. Feasible settlements of confiningLiPSs to reduce the loss of active substances and improve the cycle stability include wrapping sulfur withcompact layers, designing matrix with porous or hollow structures, adding adsorbents owning stronginteraction with sulfur and inserting polysulfide barriers between cathodes and separators. This reviewcategorizes them into physical and chemical confinements according to the influencing mechanism. Withfurther discussion of their merits and flaws, synergy of the physical and chemical confinement is believedto be the feasible avenue that can guide Li-S batteries to the practical application.

Effects of Crude Oil Contamination on Soil Physical and Chemical Properties in Momoge Wetland of China

Large oilfields are often coincidentally located in major river deltas and wetlands,and potentially damage the structure,function and ecosystem service values of wetlands during oil exploration.In the present study,the effects of crude oil contamination during oil exploration on soil physical and chemical properties were investigated in marshes of the Momoge National Nature Reserve in Jilin Province,China.The concentrations of total petroleum hydrocarbons in the marsh soil near the oil wells are significantly higher than those in the adjacent control marsh.Soil water contents in oil-contaminated marshes are negatively correlated with soil temperature and are significantly lower than those in the control area,especially in fall.Crude oil contamination significantly increases the soil pH up to8.0,and reduces available phosphorus concentrations in the soil.The concentrations of total organic carbon are significantly different among sampling sites.Therefore,crude oil contamination could potentially alkalinize marsh soils,adversely affect soil fertility and physical properties,and cause deterioration of the marshes in the Momoge National Nature Reserve.Phyto-remediation by planting Calamagrostis angustifolia has the potential to simultaneously restore and remediate the petroleum hydrocarbon-contaminated wetlands.Crude oil contamination affects the soil physical and chemical properties,so developing an effective restoration program in the Momoge wetland is neccesary.

Overview of Physical and Chemical, Operational Properties of Nitrous Oxide Used as a Propellant for Low-thrust Rocket Engines

The results of a system analysis of the efficiency of nitrous oxide(N_2O) as a propellant component for small space vehicles(SSV) were presented. A criterion for mass efficiency of the SSV propulsion system(PS) is determined. The current global state-of-the-art of SSV PSs is shown. The application field of nitrous oxide in SSV PSs is calculated and mass efficiency of N_2O application is quantitatively determined. An overview of physical and chemical as well as operational properties of nitrous oxide as a promising, non-toxic component of rocket propellant is provided. Main physical and chemical constants of gaseous and liquid nitrous oxide; chemical properties of N_2O, thermal stability of N_2O, catalytic decomposition of N_2O, a mechanism of decomposition of N_2O, catalysts for decomposition of N_2O, ballast additives to N_2O, application of nitrous oxide, nitrous oxide as a rocket propellant, production of nitrous oxide, toxicity of nitrous oxide, fire hazard of N_2O, requirements to equipment when handling N_2O; storage and transportation of N_2O are considered. It is demonstrated that nitrous oxide is a chemical compound meeting the requirements to rocket propellants, including those related to the environmental friendliness of propellants. With 75 references.

Physical dispersion state and fluorescent property of Eu-complex in the Eu-complex/silicon rubber composites

The fluorescent complex Eu（TTA）2（Phen）（MA） （HTTA=2-Thenoyltrifluoroacetone, Phen=1,10-phenanthroline, MA=Maleic an- hydrider） was synthesized and characterized with elemental analysis, infrared spectrum （IR）, scanning electron microscope （SEM）, X-ray Diffraction（XRD）, differential scanning calorimetry（DSC）, and fluorescent measurement. To explore the effect of different physical dispersion state of Eu-complex on the fluorescent property of the Eu-complex/silicon rubber composites, various quantifies of Eu（TTA）2（phen） （MA） were mixed with silicon rubber （SIR） and peroxide to form uncured composites. These composites were vulcanized to obtain cured Eu-complex/SiR composites at 250 ℃, which was higher than the melting-point of Eu-complex. The SEM, XRD, DSC, and the fluorescent measurement of these composites showed that both the complex molecules dispersed in the silicon rubber during the melting process and the parent Eu-complex particles had positive effects on fluorescent property, whereas the re-crystallized Eu-complex particles and the aggregating complexes formed during the melting-process had negative effects on fluorescent property. For the uncured composites, their fluorescent intensities almost did not change with the increasing amount of Eu-complex. Furthermore, for the composites with small content of Eu-complex, their fluorescent intensities decreased significantly after curing, and this difference in fluorescent intensity became smaller as the content of Eu-complex increases.

Separator coatings as efficient physical and chemical hosts of polysulfides for high-sulfur-loaded rechargeable lithium–sulfur batteries

Lithium-sulfur batteries(LSBs)are promising alternative energy storage devices to the commercial lithium-ion batteries.However,the LSBs have several limitations including the low electronic conductivity of sulfur(5×10^-30S cm^-1),associated lithium polysulfides(PSs),and their migration from the cathode to the anode.In this study,a separator coated with a Ketjen black(KB)/Nafion composite was used in an LSB with a sulfur loading up to 7.88 mg cm^-2to mitigate the PS migration.A minimum specific capacity(Cs)loss of 0.06%was obtained at 0.2 C-rate at a high sulfur loading of 4.39 mg cm^-2.Furthermore,an initial areal capacity up to 6.70 mAh cm^-2 was obtained at a sulfur loading of 7.88 mg cm^-2.The low Cs loss and high areal capacity associated with the high sulfur loading are attributed to the large surface area of the KB and sulfonate group(SO3^-)of Nafion,respectively,which could physically and chemically trap the PSs.

Effects of Different Nitrogen Applications on Soil Physical, Chemical Properties and Yield in Maize (<i>Zea mays</i>L.)

Application of nitrogen (N) fertilizer is one of the most important approaches on improving maize grain yield. However, as is known to all, overuse N fertilizer not only leads to decline of N use efficiency and maize yield, but also leads to potential risk to environment pollution. This experiment was conducted to determine the effects of N fertilizer applications with nine different treatments on soil physical-chemical characters and maize grain yield using hybrid variety Zhengdan 958 in 2011 and 2012. Results indicated that the soil bulk densities of T2 (CK) and T1 were the lowest compared to other treatments in 2011 and 2012, respectively, whereas the soil bulk density of T5 in 2011 and T3 in 2012 were higher than other treatments. The soil porosity and field capacity of T5 in 2011 and T3 in 2012 were lower than other treatments, but those of CK in 2011 and T1 in 2012 were higher than other treatments. The pH values of T3 to T7 were lower than other treatments. These results indicated that the soil bulk densities were increased, whereas the soil porosity, field capacity and values pH were decreased by N application at different stages. N application could increase the N contents of leaf and stem, whereas less or excess N application should not significant improve maize yield. Although the soil organic matter and total N contents of T3 were the highest in both 2011 and 2012, the yield of T4 is the highest in both 2011 and 2012. The application amount, period and times of N fertilizer were important to maize yield.