采用碳酸盐共沉淀法和高温烧结工艺将一定量的Mo^(6+)掺杂到Li_(1.20)Mn_(0.54)Ni_(0.13)Co_(0.13)O_(2)正极材料中。利用XRD、SEM、EDS和恒流测试仪研究Mo^(6+)掺杂对Li_(1.20)Mn_(0.54)Ni_(0.13)Co_(0.13)O_(2)正极材料的晶体结构、...采用碳酸盐共沉淀法和高温烧结工艺将一定量的Mo^(6+)掺杂到Li_(1.20)Mn_(0.54)Ni_(0.13)Co_(0.13)O_(2)正极材料中。利用XRD、SEM、EDS和恒流测试仪研究Mo^(6+)掺杂对Li_(1.20)Mn_(0.54)Ni_(0.13)Co_(0.13)O_(2)正极材料的晶体结构、微观形貌和电化学性能的影响。结果显示,Li_(1.20)Mn_(0.52)Ni_(0.13)Co_(0.13)Mo_(0.02)O_(2)表现出更低的阳离子混排和优异的电化学性能。经过Mo^(6+)掺杂后的正极,由于Li^(+)高速的迁移速率,使得首次不可逆容量损失降低,并展现出更好的高倍率性能和优异的循环稳定性。在0.5C倍率下循环100周后,Li_(1.20)Mn_(0.52)Ni_(0.13)Co_(0.13)Mo_(0.02)O_(2)的容量保持率达到92.2%,远远大于Li_(1.20)Mn_(0.54)Ni_(0.13)Co_(0.13)O_(2)的87.5%。另外,当放电倍率增大到5C时,Li_(1.2)0Mn_(0.54)Ni_(0.13)Co_(0.13)O_(2)的放电比容量要比Li_(1.20)Mn_(0.52)Ni_(0.13)Co_(0.13)Mo_(0.02)O_(2)低21.0 m A·h/g。因此,采用Mo^(6+)掺杂改性Li_(1.2)0Mn_(0.54)Ni_(0.13)Co_(0.13)O_(2)正极材料,可以有效提高锂电池的循环保持率和高倍率放电性能。展开更多
Lithium(Li)-rich manganese(Mn)-based cathode Li_(1.2)Ni_(0.13)Co_(0.13)Mn_(0.54)O_(2)(LRNCM)has attracted considerable attention owing to its high specific discharge capacity and low cost.However,unsatisfactory cycle ...Lithium(Li)-rich manganese(Mn)-based cathode Li_(1.2)Ni_(0.13)Co_(0.13)Mn_(0.54)O_(2)(LRNCM)has attracted considerable attention owing to its high specific discharge capacity and low cost.However,unsatisfactory cycle performance and poor rate property hinder its large-scale application.The fast ionic conductor has been widely used as the cathode coating material because of its superior stability and excellent lithium-ion conductivity rate.In this study,Li_(1.2)Ni_(0.13)Co_(0.13)Mn_(0.54)O_(2) is modified by using Li_(1.4)Al_(0.4)Ti_(1.6)(PO_(4))_(3)(LATP)ionic conductor.The electrochemical test results show that the discharge capacity of the resulting LRNCM@LATP1 sample is 198 mA·h/g after 100 cycles at 0.2C,with a capacity retention of 81%.Compared with the uncoated pristine LRNCM(188.4 m A·h/g and 76%),LRNCM after the LATP modification shows superior cycle performance.Moreover,the lithium-ion diffusion coefficient D_(Li+)is a crucial factor affecting the rate performance,and the D_(Li+)of the LRNCM material is improved from 4.94×10^(-13) to 5.68×10^(-12)cm^(2)/s after modification.The specific capacity of LRNCM@LATP1 reaches 102.5 mA·h/g at 5C,with an improved rate performance.Thus,the modification layer can considerably enhance the electrochemical performance of LRNCM.展开更多
自动增益控制(AGC)环路能够实现对输出信号幅度的精确控制,是射频接收器中不可或缺的一部分。提出了一种用于射频宽带电台中的自动增益控制环路。针对自动增益控制环路,从可编程增益放大器(PGA)、可变增益放大器(VGA)和峰值比较器3个角...自动增益控制(AGC)环路能够实现对输出信号幅度的精确控制,是射频接收器中不可或缺的一部分。提出了一种用于射频宽带电台中的自动增益控制环路。针对自动增益控制环路,从可编程增益放大器(PGA)、可变增益放大器(VGA)和峰值比较器3个角度论述了电路结构和设计方法。对AGC的功能实现和性能指标进行了仿真分析。仿真结果表明,该自动增益放大器在0.13μm互补型金属氧化物半导体(CMOS)工艺下,具有80 d B动态范围,增益步进为1 d B。展开更多
文摘采用碳酸盐共沉淀法和高温烧结工艺将一定量的Mo^(6+)掺杂到Li_(1.20)Mn_(0.54)Ni_(0.13)Co_(0.13)O_(2)正极材料中。利用XRD、SEM、EDS和恒流测试仪研究Mo^(6+)掺杂对Li_(1.20)Mn_(0.54)Ni_(0.13)Co_(0.13)O_(2)正极材料的晶体结构、微观形貌和电化学性能的影响。结果显示,Li_(1.20)Mn_(0.52)Ni_(0.13)Co_(0.13)Mo_(0.02)O_(2)表现出更低的阳离子混排和优异的电化学性能。经过Mo^(6+)掺杂后的正极,由于Li^(+)高速的迁移速率,使得首次不可逆容量损失降低,并展现出更好的高倍率性能和优异的循环稳定性。在0.5C倍率下循环100周后,Li_(1.20)Mn_(0.52)Ni_(0.13)Co_(0.13)Mo_(0.02)O_(2)的容量保持率达到92.2%,远远大于Li_(1.20)Mn_(0.54)Ni_(0.13)Co_(0.13)O_(2)的87.5%。另外,当放电倍率增大到5C时,Li_(1.2)0Mn_(0.54)Ni_(0.13)Co_(0.13)O_(2)的放电比容量要比Li_(1.20)Mn_(0.52)Ni_(0.13)Co_(0.13)Mo_(0.02)O_(2)低21.0 m A·h/g。因此,采用Mo^(6+)掺杂改性Li_(1.2)0Mn_(0.54)Ni_(0.13)Co_(0.13)O_(2)正极材料,可以有效提高锂电池的循环保持率和高倍率放电性能。
基金Project(51772333) supported by the National Natural Science Foundation of China。
文摘Lithium(Li)-rich manganese(Mn)-based cathode Li_(1.2)Ni_(0.13)Co_(0.13)Mn_(0.54)O_(2)(LRNCM)has attracted considerable attention owing to its high specific discharge capacity and low cost.However,unsatisfactory cycle performance and poor rate property hinder its large-scale application.The fast ionic conductor has been widely used as the cathode coating material because of its superior stability and excellent lithium-ion conductivity rate.In this study,Li_(1.2)Ni_(0.13)Co_(0.13)Mn_(0.54)O_(2) is modified by using Li_(1.4)Al_(0.4)Ti_(1.6)(PO_(4))_(3)(LATP)ionic conductor.The electrochemical test results show that the discharge capacity of the resulting LRNCM@LATP1 sample is 198 mA·h/g after 100 cycles at 0.2C,with a capacity retention of 81%.Compared with the uncoated pristine LRNCM(188.4 m A·h/g and 76%),LRNCM after the LATP modification shows superior cycle performance.Moreover,the lithium-ion diffusion coefficient D_(Li+)is a crucial factor affecting the rate performance,and the D_(Li+)of the LRNCM material is improved from 4.94×10^(-13) to 5.68×10^(-12)cm^(2)/s after modification.The specific capacity of LRNCM@LATP1 reaches 102.5 mA·h/g at 5C,with an improved rate performance.Thus,the modification layer can considerably enhance the electrochemical performance of LRNCM.
文摘自动增益控制(AGC)环路能够实现对输出信号幅度的精确控制,是射频接收器中不可或缺的一部分。提出了一种用于射频宽带电台中的自动增益控制环路。针对自动增益控制环路,从可编程增益放大器(PGA)、可变增益放大器(VGA)和峰值比较器3个角度论述了电路结构和设计方法。对AGC的功能实现和性能指标进行了仿真分析。仿真结果表明,该自动增益放大器在0.13μm互补型金属氧化物半导体(CMOS)工艺下,具有80 d B动态范围,增益步进为1 d B。
