Synthesis,Characterization and Crystal Structure of 3-o-Fluorophenyl-6-(4-decarboxydehydroabietyl)-1,2,4-triazolo[3,4-b]-1,3,4-thiadiazole

Three novel 1,2,4-triazolo[3,4-b]-1,3,4-thiadiazoles were designed,synthesized and characterized by IR,NMR and APCI-MS.3-o-Fluorophenyl-6-（4-decarboxydehydroabietyl）-1,2,4-triazolo[3,4-b]-1,3,4-thiadiazole（6a,C28H31FN4S） was structurally determined by single-crystal X-ray diffraction.The crystal belongs to the orthorhombic system,space group P212121 with a=6.0153（14）,b=12.2577（19）,c=34.055（3）A,V=2511.0（7）A^3,Z=4,Mr=474.63,Dc=1.255Mg/m^3,λ=0.71073 A,μ（MoKα）=0.160 mm^-1,F（000）=1008,the final R=0.0555 and wR=0.1248 for 3094 observed reflections with I〉2σ（I）.There are six rings in the crystal structure of the title compound.The dihedral angle between 1,2,4-triazole and 1,3,4-thiadiaole rings is 1.4o,and that between 1,2,4-triazole and benzene ring D 25.5o.

微波促进下3-(2-苯并呋喃基)-4-氨基-5-巯基-1,2,4-三唑及其衍生物的合成

微波辐射条件下,首先由2-苯并呋喃甲酰肼依次与二硫化碳和水合肼反应合成3-(2-苯并呋喃基)-4-氨基-5-巯基-1,2,4-三唑,进一步在微波辐射条件下由4-氨基-5-巯基-1,2,4-三唑分别与芳甲酸/芳氧基乙酸、α-溴代苯乙酮及芳醛反应以较高产率制得了相应的1,2,4-三唑并[3,4-b]-1,3,4-噻二唑、1,2,4-三唑并[3,4-b]-1,3,4-噻二嗪及4-芳亚甲基亚胺基-5-巯基-1,2,4-三唑.产物结构经IR,1HNMR,MS及元素分析进行了表征.

2,5-二取代1,3,4-噻二唑的合成

以5-氨基-2-巯基-1,3,4-噻二唑为原料,经过胺基酰基化、氯气氧化制得5-乙酰胺基-1,3,4-噻二唑-2-磺酰氯,化合物与N-甲基哌嗪、苯胺反应,合成两个未见报道的目标产物:5-乙酰胺基-1,3,4-噻二唑-2-(N-甲基哌嗪磺酰胺)和5-乙酰胺基-1,3,4-噻二唑-2-(磺酰苯胺)。利用IR、H-NMR、LC-MS对目标产物进行表征。

Synthesis,Crystal Structure,DFT Studies and Antifungal Activity of 5-(4-Cyclopropyl-5-((3-fluorobenzyl)sulfonyl)-4H-1,2,4-triazol-3-yl)-4-methyl-1,2,3-thiadiazole

5-（4-Cyclopropyl-5-（（3-fluorobenzyl）sulfonyl）-4H-1,2,4-triazol-3-yl）-4-methyl-1,2,3-thiadiazole was synthesized and recrystallized from Et OH. The compound was characterized by ^1H NMR,MS,elemental analysis and X-ray diffraction. The structure-active relationship and the antifungal activity based on density functional theory calculation（DFT） and antifungal activities were investigated. The compound crystallizes in the monoclinic space group P121/n1 with a = 8.929（3）,b=12.715（4）,c=15.161（5） A°,β = 106.142（3）o,V = 1653.3（9） A°3,Z = 4 and R = 0.0393 for 3930 observed reflections with I 〉 2σ（I）. Theoretical calculation of the title compound was carried out with B3LYP/6-31G（d,p）. The full geometry optimization was carried out using the 6-31G（d,p） basis set.The frontier orbital energy and atomic net charges were discussed. The observed results of the compound have been compared with theoretical results and the experimental data show good agreement with the calculated values. The compound exhibits good antifungal activity.

5-亚氨基-7-氧代-6-芳基偶氮-1,3,4-噻二唑[3,2-a]并嘧啶衍生物的绿色合成

合成了5种新的5-亚氨基-7-氧代-6-芳基偶氮-1,3,4-噻二唑[3,2-a]并嘧啶衍生物,通过元素分析、IR、1HNMR和质谱分析确定了其结构。

Synthesis of 2-(N-formyl)-5-aryl/aryloxymethyl-1,3,4-thiadiazoles with potential bioactivity in PEG-400

An environmental benign procedure for synthesis of 2-(N-formyl)-5-aryl/aryloxymethyl-1,3,4-thiadiazoles has been developed by reaction of 2-amino-5-aryl/aryloxymethyl-1,3,4-thiadiazoles with formic acid in PEG-400.The key advantages of this protocol are the shorter reaction time,higher yields,lower cost,simple workup,and environment-friendly compared to conventional organic solvent reaction.The present method does not involve any hazardous organic solvent or catalyst.

Microwave Assistant Synthesis and Dimeric Crystal Structure of 2-(((6-Chloropyridin-3-yl)-methyl)thio)-5-(pyridin-4-yl)-1,3,4-thiadiazole

The title compound 2-(((6-chloropyridin-3-yl)methyl)thio)-5-(pyridin-4-yl)-1,3,4-thiadiazole 5(C26H18Cl2N8S4) was synthesized, and its structure was confirmed by 1H NMR, MS and elemental analyses and X-ray diffraction. It crystallizes in the triclinic system, space group P1 with a = 9.452(4), b = 12.335(4), c = 13.017(5) A, α = 90.624(5), β = 110.541(5), γ =104.879(4)°, Dc = 1.561 g/cm3, Z = 2, V = 1364.9(9) A3, F(000) = 656, the final R = 0.0300 and w R = 0.0635 for 4206 observed reflections with I 】 2σ(I). The preliminary biological test showed that the title compound has activities against Stemphylium lycopersici(Enjoji) Yamamoto, Fusarium oxysporum. sp. cucumebrium, and Botrytis cinerea with inhibitory activities to be 9.82%, 44.44% and 20.00%, respectively.

Synthesis and Structure of 2-Isobutyl-6-(2',4'-dichlorophenyl)imidazo[2,1-b]-1,3,4-thiadiazole

The crystal structure of the title compound, 2-isobutyl-6-(2?4?dichlorophenyl)- imidazo[2,1-b]-1,3,4-thiadiazole (C14H13Cl2N3S, Mr = 326.23), has been synthesized by the treatment of 2-amino-5-isobutyl-1,3,4-thiadiazole with a-chloroaceto-2,4-dichlorophenone and determined by single-crystal X-ray diffraction. The crystal belongs to monoclinic, space group P21/n with a = 12.483(7), b = 8.420(4), c = 14.998(8) ? b = 105.770(10)? V = 1517.0(14) 3, Z = 4, Dc = 1.428 g/cm3, S = 0.902, m(MoKa) = 0.558 mm-1, F (000) = 672, R = 0.0579 and wR = 0.1186. The X-ray analytic results showed that all ring atoms in the imidazothiadiazole moiety are almost coplanar. The dihedral angel between the phenyl group and hetero-cycle is 16.8(0.2)?

Synthesis and antitumor activity of N^1-acetylamino-(5-alkyl/aryl-1,3,4-thiadiazole-2-yl)-5-fluorouracil derivatives

A new series of N^1-acetylamino-（5-alkyl/aryl- 1,3,4-thiadiazole-2-yl）-5-fluorouracil derivatives were designed and synthesized. These compounds have not been reported in literature, and their structure chemical were confirmed by IR, ^1H NMR and MS （HRMS）. The results of antitumor inhibitory activity test showed that some compounds possess more potent antitumor inhibitory activity than 5-fluorouracil.

2-取代硫醚-5-(5,7-二甲基-1,2,4-三唑并[1,5-a]嘧啶基)-1,3,4-噁二唑/噻二唑类化合物的合成及生物活性

以5-氨基-1H-1,2,4-三唑-3-羧酸乙酯为起始原料,设计合成了11个新型的2-取代硫醚-5-(5,7-二甲基-1,2,4-三唑并[1,5-a]嘧啶基)-1,3,4-噁二唑类化合物(5)和6个新型的2-取代硫醚-5-(5,7-二甲基-1,2,4-三唑并[1,5-a]嘧啶基)-1,3,4-噻二唑类化合物(8).通过1HNMR,MS和元素分析对所合成的化合物进行了结构表征.初步的生物活性测试结果表明,所合成的化合物均表现出不同程度的除草及杀菌活性,其中化合物5k和8f的活性最好,在50mg/L浓度下对水稻纹枯病菌的抑制率达90%以上.

Synthesis and Tribological Behaviour of 1,3,4-Thiadiazole Schiff Base Derivatives as Multifunctional Lubricant Additives

Six new 1,3,4-thiadiazole Schiff base derivatives were synthesized and characterized by IR spectroscopy and ~1H NMR spectrometry, and their anti-corrosion properties and thermal stability were investigated via thermogravimetric analysis(TGA) and copper strip corrosion test. The tribological behavior of the said Schiff base derivatives was evaluated on an Optimol SRV~?4 oscillating reciprocating friction and wear tester. The worn surfaces of the steel discs were investigated using a scanning electron microscope(SEM) and energy dispersive X-ray spectrometer(EDS). The test results indicated that these thiadiazole Schiff base derivatives possessed favourable thermal stability, corrosion inhibiting ability and the capability of improving the tribological characteristic of the base oil effectively. It is assumed that the adsorbed additives probably reacted with the steel surfaces during the friction process, resulting in the formation of a protective film composed of sulphates, sulphides and organic nitrogen compounds.

含有1H-1,2,4-三唑咪唑[2,1-b]-1,3,4-噻二唑、S-三唑[3,4-b]-1,3,4-噻二唑衍生物的合成及生物活性

合成了 1 8个含有 1 H-1 ,2 ,4-三唑的咪唑 [2 ,1 -b]-1 ,3 ,4-噻二唑以及 S-三唑 [3 ,4-b]-1 ,3 ,4-噻二唑的稠杂环衍生物 ,经元素分析及谱学表征 ,探讨 2 ,5 ,6-三取代咪唑 [2 ,1 -b]-1 ,3 ,4-噻二唑的可能生成机制 .对大肠杆菌、绿脓杆菌、枯草杆菌等初步抑菌试验证明 。

3,6-二取代苯基-二-1,2,4-三唑并[3,4-b]-1,3,4-噻二唑衍生物的合成

以2,5-二巯基-1,3,4-噻二唑为原料,与水合肼缩合,生成2,5-二肼基-1,3,4-噻二唑.2,5-二肼基-1,3,4-噻二唑与苯甲酰氯反应生成2,5-二酰肼基-1,3,4-噻二唑,以POCl3为环合剂环合酰肼基-1,3,4-噻二唑,合成3,6-二取代苯基-二-1,2,4-三唑并[3,4-b]-1,3,4-噻二唑衍生物,合成的新化合物的结构通过元素分析、红外光谱、核磁共振氢谱和质谱予以证实,并提出了环化反应机理.

New Fungicidally Active Pyrazolyl-Substituted 1,3,4-Thiadiazole Compounds and Their Preparation

The potassium dithiocarbazate 2 was obtained through condensation of 5-pyrazole hydrazide 1 with carbon disulfide in ethanolic potassium hydroxide. and its cyclization gave 5-pyrazolyl-1,3,4-thiadiazole-2-thione 3 in concentrated sulfuric acid. Alkylation of 3 yielded 2-alkylthio-5-pyrazolyl-1,3,4-thiadiazole 4. The preliminary bioassay tests indicated that compounds 3 and 4 have fungicidal activity.

2,5-Dimercapto-1,3,4-Thiadiazole(DMCT)-Based Polymers for Rechargeable Metal-Sulfur Batteries

Organosulfur materials are a sustainable alternative to the present-day layered oxide cathodes in lithium-based batteries.One such organosulfur material that was intensely explored from the 1990s to early 2010s is 2,5-dimercapto-1,3,4-thiadiazole(DMCT).However,research interest declined as the electrode reactions with DMCT were assumed to be too sluggish to be practical.Armed with the advances in metal-sulfur batteries,we revisit DMCT-based materials in the form of poly[tetrathio-2,5-(1,3,4-thiadiazole)],referred to as pDMCT-S.With an appropriate choice of electrode design and electrolyte,pDMCT-S cathode paired with a Li-metal anode shows a capacity of 715 mA h g^(-1)and a Coulombic efficiency of 97.7%at a C/10 rate,thus quelling the concerns of sluggish reactions.Surprisingly,pDMCT-S shows significantly improved long-term cyclability compared to a sulfur cathode.Investigations into the origin of the stability reveals that the discharge product Li-DMCT in its mesomeric form can strongly bind to polysulfides,preventing their dissolution into the electrolyte and shuttling.This unique mechanism solves a critical problem faced by sulfur cathodes.Encouragingly,this mechanism results in a stable performance of pDMCT-S with Na-metal cells as well.This study opens the potential for exploring other organic materials that have inherent polysulfide sequestering capabilities,enabling long-life metal-sulfur batteries.

One-pot synthesis of 2,5-disubstituted-1,3,4-thiadiazoles under ultrasonic irradiation

A facile one-pot synthesis of 2,5-disubstituted-1,3,4-thiadiazoles was achieved by ultrasonic irradiation of a mixture of 1-naphthylacetyl chloride, NH4CNS, CH2Cl2 and PEG-400 for 1.5 h at 10–20 °C and subsequent irradiation for 1.5 h in the presence of N-arylglycine hydrazides. This method requires short time and gives thiadiazoles in high yields.

A novel series of 2,5-disubstituted 1,3,4-thiadiazoles as potential anticonvulsant agent

In pursuit for better antiepileptic drug and the importance of semicarbazones and 2,5-disubstituted 1,3,4-thiadiazoles as anticonvulsant pharmacophore, a series of novel N-（{5-[（6-methyl-l-benzofuran-3-yl）methyl]-l,3,4-thiadiazol-2-yl}carba- mothioyl）-2/3/4-substitutedbenzamide were designed, synthesized and evaluated for their anticonvulsant activity. The findings of the present studies confirmed that the pharmacophore model with four binding sites is crucial for anticonvulsant activity. Structure-activity relationships among synthesized compounds were also established.

One-dimensional Zigzag Chain Composed of HgI_2 Unit and 2,5-Bis(4-pyridyl)-1,3,4-thiadiazole:[HgI_2(C_(12)H_8N_4S)]

The title compound, [HgI2（C12H8N4S）], has been synthesized and characterized by single-crystal X-ray diffraction analysis. It crystallizes in monoclinic, space group P21/n with a = 14.086（2）, b = 6.0365（6）, c = 20.286（2）°A,β= 108.818（5）°, V = 1632.7（3）°A^3, Mr = 694.67, Z = 4, D, = 2.826 g/cm^3,μ= 13.331 mm^-1, F（000） = 1240, S = 1.108, the final R = 0.0438 and wR = 0.0934 for 3085 observed reflections （I〉 2σ（I））. The Hg（Ⅱ） atom is coordinated by two 2,5-bis（4-pyridyl）-1,3,4-thiadiazole （L） molecules and two iodine anions in a distorted tetrahedral coordination geometry. Mercury atoms are linked by the organic ligands to form a one-dimensional zigzag chain. It is noteworthy that such 1D zigzag chains are extended into a two-dimensional double layer framework through I…I interactions

Syntheses and Crystal Structures of Two Novel Cobalt(Ⅱ) Complexes with 2-Amino-5-substituted-1,3,4-thiadiazole as Ligands

Two novel cobalt（Ⅱ） compounds were obtained and characterized by X-ray sing- le-crystal diffraction, IR, 1H NMR and elemental analysis. Compound 1 crystallizes in monoclinic, space group P21/n, with a = 18.046（4）, b = 11.335（3）, c = 19.157（5）A, β = 92.707（3）°, Z = 4, V = 3914.4（16） A3, Mr = 968.56, Dc = 1.644 g/cm3, μ = 1.378 mm^-1, F（000） = 1960, the final R = 0.0367 and wR = 0.0895. The crystal of compound 2 is of monoclinic, space group P211c with a = 8.7253（10）, b = 10.9031（13）, c = 18.235（2）A,β = 93.2210（10）°, Z = 4, V = 1732.0（3）A3, Mr = 464.21, Dc = 1.780 g/cm3,μ = 1.560 mm-1, F（000） = 932, the final R = 0.0322 and wR = 0.0743.