Isobaric Vapor–Liquid Equilibrium for tert-Butyl Alcohol + Water + Propane-1,3-Diol + 1-Ethyl-3-Methylimidazolium Chloride at 101.3 kPa

In this study, we used a mixture of organic liquid propane-1,3-diol and ionic liquid 1-ethyl-3-methylimidazolium chloride([emim]Cl) as the entrainer to separate tert-butyl alcohol(TBA) + water. We measured the isobaric vapor–liquid equilibrium(VLE) for the quaternary system TBA + water + propane-1,3-diol + [emim]Cl at 101.3 kPa, and found the VLE data to be well correlated with the nonrandom two-liquid model. These results show that the mixed solvent of propane-1,3-diol + [emim]Cl can increase the relative volatility of TBA to water and break the azeotropic point. We found no notable synergetic effect between them, and observed that the liquid mixed solvent of propane-1,3-diol and [emim]Cl had lower viscosity than [emim]Cl, which makes it a promising entrainer for separating the TBA + water azeotrope in industrial applications.

Synthesis and Characterization of Poly [2,2-( m-phenylene) -5,5-bibenzimidazole] in 1-butyl-3-methylimidazolium Chloride

Poly[ 2, 2-（m.phenylene） -5, 5-bibenzimidazole] （mPBI） were synthesized by mixing 3, 3＇, 4, 4＇-tetraaminobiphenyl and isophthallc acid in 1 -butyl-3 -methyUmidazolinm chloride （ E BMIM] CI）. Intrinsic viscosity of mPBI polymers was 0.67 dL/g which was measured in 96% sulfuric acid. The polymer was characterized by Fourier transform infrared spectroscopy （FTIR）, nuclear magnetic resonance （ 1H-NMR ）, and thermogravimetric analysis （TGA）. The effects of polymerization conditions on the intrinsic viscosity of mPBI were investigated. It showed that the molecular weight of polymer mainly depended on pre-reaction time and reaction temperature. Comparison of structure and properties of mPBI synthesized in ionic liquids（ILs） and polyphosphoric acid was also reported. It indicates that the ionic liquids are a kind of good solvents in synthesis process of m_PBI and ionic liquids mainly affect molecular weight of mPBL

Preparation and Properties of Regenerated Cellulose/Amylopectin Blend Fibers from 1-Butyl-3-Methylimidazolium Chloride with Controlled Biodegradation

Regenerated cellulose/amylopectin blend fibers with controlled biodegradation were produced using dry-jet wet-spinning technology from cellulose/amylopectin/1-butyl-3-methylimidazolium chloride blends.Morphological,structural and chemical analyses revealed that dense,homogeneous and void-free blend fibers were prepared in a two-stage dissolution process.The blend fibers were regenerated from water and treated with water or 95%(volume fraction)ethanol.However,cellulose-amylopectin interactions caused crystalline rearrangements in the blend fibers,resulting in a general decrease in crystallinity.Generally,tensile properties decreased with increasing amylopectin content,except that the blend fibers with 10%(mass fraction)amylopectin exhibited higher tensile strength than the regenerated cellulose control fibers.Ethanol treatment reduced the hydrophilicity of the blend fibers,increasing the crystallinity of the blend fibers.The blend fibers exhibited remarkable degradation,directly proportional to the amylopectin content.Despite higher crystallinity,ethanol-treated blend fibers degraded faster than water-treated fibers,indicating amylopectin and ethanol regulated the degradation.

Synthesis and Characterization of a Novel Ionic Liquid Polymer: Poly(1-(3-aminobenzyl)-3-methylimidazolium chloride)

A new type of polymerizable ionic liquid （IL） 1-（3-aminobenzyl）-3-methylimidazolium chloride （AMIC） was synthesized to obtain a novel polymer salt poly（1-（3-aminobenzyl）-3-methylimidazolium chloride） （PAMIC）. The AMIC was structurally characterized by mass spectrometry and Fourier transform infrared spectrometry （FTIR）. The structure, morphology and properties of PAMIC were investigated by FTIR, ultraviolet visible absorption spectra （UV-Vis）, scanning electron microscopy （SEM）, energy dispersive X-ray spectroscopy （EDX）, conductivity measurement and thermo- gravimetric analysis （TGA）. The PAMIC was spherulitic with an average diameter of about 50 nm and showed high conductivity and excellent thermal stability.

Efficient and ecological leather processing: replacement of lime and sulphide with dispase assisted by 1-allyl-3-methylimidazolium chloride

Leather is a collagen-based biomass prepared from raw skins or hides by a series of unit operations, in which the unhairing and fiber opening are extremely important operations. However, the conventional Na2S/Ca(OH)2 system used in unhairing and fiber opening has given rise to the pollution to the environment. It is necessary to develop substitute technology for the Na2S/Ca(OH)2. In the present study, 1-allyl-3-methylimidazolium chloride ([AMIm]Cl) was used to cooperate with dispase for cycle unhairing and one-pot beamhouse to recycle waste bovine hides and com-pared with conventional processing. During those processes, the mechanism of [AMIm]Cl-dispase synergistic unhair-ing and collagen fibers opening were studied. Besides, plant hazard, organic matter and [AMIm]Cl of wastewater from [AMIm]Cl-dispase process were respectively investigated and separated to evaluate the environmental and economic benefits of the [AMIm]Cl-dispase process. As a result, enzyme activity after unhairing by [AMIm]Cl-diapase system for using 5 times is higher than that by KCl-dispase system, and needs lower unhairing time, which is because of rapid penetration of [AMIm]Cl-dispase solution in bovine hides. For this reason, the tensile strength and elastic modulus of tanned leather from [AMIm]Cl-dispase process are higher than those from the KCl-diapase and conventional pro-cesses, and its hydrothermal shrinkage temperature is comparable to that of the conventional one. Because of the 58.13% lower wastewater discharge (WD), 66.60% lower total solids (TS), 97.23% lower ammonia nitrogen (NH3-N), non-toxic wastewater and organic matter recovery in wastewater are reached from [AMIm]Cl-dispase process, which is expected to be an alternative to the conventional process to reduce environmental pollution and realize the sustainable development of technology for leather manufacturing.

Selective Synthesis of 2,6-Dimethylnaphthalene by Transalkylation in the Presence of Acid Ionic Liquids [C_nmim]Cl-AlCl_3

A highly selective synthesis of 2,6-dimethylnaphthanlene（2,6-DMN） by transalkylation between 2-methylnaphthanlene（2-MN） and 1,2,4,5-tetramethylbenzene（TeMB） was performed with 1-alkyl-3-methylimidazo- lium aluminum chloride（[Cnmim]Cl-AlCl3） ionic liquids（ILs） as catalysts. The influences of the alkyl group as the organic cation, the acidic strength of [C4mim]Cl-AlCl3 ILs as well as the reaction conditions on the catalytic performance were investigated. [C4mim]Cl-AlCl3 ILs[x（AlCl3）=71%] exhibited high activity and selectivity toward 2,6-DMN. The selectivity to 2,6-DMN and the 2,6-DMN/2,7-DMN ratio reached up to 68.2% and 3.7：1, respectively. The UV-Vis spectrum of TeMB treated by different ILs shows that the protonated degree of TeMB dependeds on the acidity strength of ILs, which has a significant impact on the reaction results. The high protonated degree of TeMB is advantageous to enhancing the conversion of transalkylation and the large stereo-hindrance effect of TeMB is favorable to improving the selecivity to 2,6-DMN.

Phase Behavior of Liquid Crystals Formed in [C12mim]CI/H2O and [C12mim] Cl/Alcohols Systems

Phase behaviors of different binary systems involving 1-dodecyl-3-methylimidazolium chlo- ride （[C12mim]Cl） and H20, [C12mim]Cl and different alcohols （1-butanol, 1-pentanol, 1- hexanol and 1-octanol） are investigated at 25 ℃. Hexagonal liquid crystal phase （H1） is identified in [C12mim]Cl/H2O system, and lamellar liquid-crystalline （Lα） phase is found in [C12mim]Cl/alcohols systems by using polarized optical microscopy and small-angle X-ray scattering techniques. The formation of such phases is considered as a synergetic result of the solvatophobic force and the hydrogen-bonded network comprising an imidazoliuin ring, chloride ion and water （or alcohols）, which can be confirmed by Fourier transform infrared spectra. It is noticeable that in [C12mim]Cl/1-octanol system, the lattice spacings of lamellar phase increase with increasing C12mimCl concentration, which is opposite to the results of [C12mim]Cl/H2O system. This may result mainly from stronger static repulsion among hydrophilic headgroups of imidazolium salts arranged in the bilayers of lamellar structures. Further measurements by differential scanning calorimetry indicate that the lamellar phase is stable within a wide temperature range above room temperature. However, the lattice spacings decrease with the increase of temperature, which may. be due to the softening of the hydrocarbon chain of [C12mim]Cl molecules. In different alcohols systems, it is found that the lamellar lyotropic liquid crystal structure is easier to be formed when the carbon chain length becomes longer.

Ionic Liquid-salt Aqueous Two-phase System, a Novel System for theExtraction of Abused Drugs

A 1-butyl-3-methylimidazolium chloride-salt aqueous two-phase system was studied on extraction of abused drugs. The effects of sorts of salts, temperature, concentration of salt and drugs on system were investigated systematically. A satisfactory extraction efficiency of 93% was obtained for papaverine while that of morphine was 65%. The extraction mechanism was primarily discussed.

Biorefinery of bacterial cellulose from rice straw:enhanced enzymatic saccharification by ionic liquid pretreatment

The pretreatment of rice straw is often used to enhance the hydrolysis. 1-allyl-3-methylimidazolium chloride （ [ AMIM ] C1） is a kind of low viscous, nontoxic and recyclable ionic liquid. It was used to treat rice straw and improve the enzymatic hydrolysis of rice straw in this study. The factors influencing the pretreatment were as follows： the dosage of rice straw in [ AMIM ] Cl, crush mesh of rice straw, pretreatment temperature and time. After the pretreatment with a 3 % （the weight ratio of rice straw to ionic liquid） rice straw dosage in [AMIM]Cl at 110 ℃ for 1 h, the yield of reducing sugar of regenerated rice straw by 33 U/mL cellulase hydrolysis was 53.3 %, which was two times higher than that of un-treated rice straw （23.7 % ）. More researches regarding straw biorefinery to bacterial cellulose are being performed in the lab and prospective results will be published in near future.