Apparent Kinetics of 1-Decene Polymerization Catalyzed Using the Ionic Liquid[Bmim]_(x)[C_(2)H_(5)NH_(3)]_(1-x)[Al_(2)Cl_(7)]

Poly-α-olefin(PAO)synthetic oil,a regular long-chain alkane produced from the catalytic polymerization ofα-olefin,is a high-quality lubricating base oil with huge market potential.In this study,PAO synthesis based on the catalytic polymerization of 1-decene using the ionic liquid(IL)[Bmim]_(x)[C_(2)H_(5)NH_(3)]_(1-x)[Al_(2)Cl_(7)]as the catalyst was studied.Compared with the conventional catalyst[Bmim][Al_(2)Cl_(7)],the obtained PAO product incorporates more trimers and tetramers of 1-decene and contains few double-bond end groups,demonstrating a better catalytic system for PAO-10 production.The apparent polymerization kinetics of 1-decene in this catalytic system were studied based on the 1-decene concentration,catalyst concentration,and reaction temperature.An apparent kinetic equation for PAO formation was determined,providing a promising strategy for PAO production using 1-decene polymerization.

Preparation of phosphorus-modified PITQ-13 catalysts and their performance in 1-butene catalytic cracking

A series of phosphorus-modified PITQ-13 catalysts was prepared by wet impregnation of NH4H2PO4 solution into an HITQ-13 parent. The catalysts were characterized using XRD, N2 adsorption, MAS NMR and NH3-TPD. Their catalytic performance in 1-butene catalytic cracking was evaluated in a fixed fluidized bed reactor. The results showed that the crystallinity, surface area and pore volume of P-modified PITQ-13 catalysts decreased with the increasing amounts of P. The number of weak acid sites increased, whereas that of strong acidity decreased. The selectivity to propylene in 1-butene cracking reactions increased because of the decrease in strong acidity. The yield of propylene achieved 41.6% over PITQ-13-2 catalyst with a P content of 1.0 wt%, which was 5.1% greater than that achieved over HITQ-13 catalyst.

MCM-36 zeolites tailored with acidic ionic liquid to regulate adsorption properties of isobutane and 1-butene

Adsorption properties of an adsorbent or a catalyst towards adsorbates are crucial in the process of adsorption separation or catalytic reaction. Surface morphology and structure of adsorbents have a significant impact on the adsorption properties. In this study, a novel acidic ionic liquid, 1-butyl-3-(triethoxysilylpropyl)imidazolium hydrogen sulfate(i.e., [BTPIm][HSO_4]), was synthesized and subsequently grafted onto the MCM-36 zeolite for the regulation of its adsorption properties towards isobutane and 1-butene. The resultant [BTPIm][HSO_4]-immobilized MCM-36(i.e., MCM-36-IL) was characterized by FT-IR, XPS, XRD, SEM, TG/DTG and N_2 adsorption–desorption measurement. It was found that the specific surface area, micropore volume and mesopore volume of the MCM-36 support underwent a reduction upon the immobilization of ionic liquid,while the surface density of acid increased from 0.0014 to 0.0035 mmol·m^(-2). The adsorption capacity of isobutane and 1-butene on the MCM-36-IL was determined by a static volumetric method. Results demonstrated that the interaction between isobutane and MCM-36-IL was enhanced and the interaction between 1-butene and MCM-36-IL was reduced. As a result, a tunable adsorption ratio of isobutane/1-butene on MCM-36 was achieved.With the increase in surface density of acid and the tunable adsorption ratio of isobutane and 1-butene on the functionalized MCM-36, the acidic ionic liquid-immobilized zeolites are beneficial to obtain an improved reaction yield and a prolonged catalyst life in the reactions catalyzed by solid acid.

1-Butene isomerization and metathesis over Mo/mordenite-alumina: Factors influencing product distribution and induction period

Effects of space velocity, reaction temperature and support acidity on product distribution and induction period in 1-butene isomerization and metathesis over Mo/mordenite-alumina were investigated. As revealed by the catalytic performance results, induction period and objective product were closely related to the reaction conditions. Lower space velocity led to longer induction period and higher propene yield. The optimal reaction temperature for propene production is around 150 ~C and it shifted to 100 ~C for ethene production. 1-Butene auto-metathesis predominated in the reaction network if the support with lower degree of sodium exchanged. And propene gradually became the dominant product upon increasing the support sodium exchange degree. 6Mo/H100Na0M-30A1 catalyst with a support of full sodium exchange degree exhibited the highest propene yield.

Production of propene from 1-butene metathesis reaction on tungsten based heterogeneous catalysts

A new propene production route from 1-butene metathesis has been developed on heterogeneous 10WO3/Al2O3-HY catalysts with different HY contents. It is found that the catalysts play bi-functionally first for the isomerization of 1-butene to 2-butene and then for the cross-metathesis between 1-butene and 2-butene to propene and 2-pentene. The combination of HY zeolite and Al2O3 is prerequisite for the production of propene. The propene yield keeps increasing with the HY content in the range of 10-70 wt%, where 10WO3/Al2O3-70HY exhibits the highest propene yield. The MS-H2-TPR and MS-O2-TPO characterizations indicate that the increase of HY content in the catalysts weakens the interaction between W species and supports, whereas enhance the probability of coking on the metal species and acid sites.

STUDY ON 1-HEXENE POLYMERIZATION BASED ON ZIEGLER-NATTA CATALYSTS WITH DOPED SUPPORT

A series of Ti/Mg supported catalysts are prepared by using ball-milled mixtures of MgCl2-ethanol adducts and NaCl as supports, and 1-hexene polymerizations catalyzed by the novel catalysts are studied. It is found that the molecular weight distribution of poly(1-hexene) becomes apparently narrower when catalysts with doped supports are used, indicating that changing the structure of the support is an effective way to regulate the active center distribution of heterogeneous Ziegler-Natta catalyst.

STUDY ON THE MECHANISM OF 1-OCTENE ZIEGLER-NATTA POLYMERIZATION BASED ON THE NUMBER OF ACTIVE CENTERS

The number of active centers (C_p)-t and k_p-t profiles of Solvay type TiCl_3 - AlR_3 (R=C_2H_5, i-C_4H_9) or Stauffer AA TiCl_3-Al (C_2H_5)_3 catalyzed 1-octene polymerization were determined by using an acetyl chloride quenching method as well as kinetic data. The results show that in the studied systems k_p decreases when C_p increases, indicating the presence of two or more types of different active centers. The C_(p^(-t)) plots of the Solvay TiCl_3-AlR_3 systems show the presence of both stable active centers and unstable centers which decay in the polymerization process. The phenomena are explained based on a model of active center plurality. The increases of C_p in the induction periods are also discussed.

SYNTHESIS AND POLYMERIZATION OF 2-OXO-3-METHYLENE-5, 6-DIPHENYL-1,4-DIOXAN

A new cyclic monomer, 2-oxo-3-methylene-5, 6-diphenyl-1, 4-dioxan, was synthesized. Thestructure of the intermediates and the monomer were determined by IR,~1H NMR,^(13)C NMR andelemental analysis. This new monomer is different from other cyclic monomers in this series,it isa solid (mp 108--109℃)and not very reactive, but still can undergo free radical ring-openingpolymerization. The free radical polymerization was carried out at 130℃. The structure of theresulting polymer was discussed and charaterized by IR, ~1H NMR, ^(13)C NMR and elementalanalysis. The molecular weight of the polymer was estimated by viscosity determination.

CATIONIC POLYMERIZATION OF 1,3—PENTADIENE INITIATED BY ORGANIC AZIDE/Et_2AlCl

The cationic polymerization of 1, 3-pentadiene was initiated by the organic azide/Et_2 AlClinitiating system in CH_2Cl_2 and n-hexane. The polymerizations were also carried out in parallelwith organic chloride/Et_2AlCl and Et_2 AlCl alone for comparison. The Et_2 AlCl- induced polymer-ization gives a low yield while the polymerization initiated by organic chloride/Et_2 AlCl producesmainly insoluble product. In contrast, the polymerization with azide/Et,AlCl has a high conver-sion and the resulting polymer having a high molecular weight is totally soluble. The SEC spectraof the polymers have clearly shown the differences between these initiating systems.

STUDY ON POLYMERIZATION MECHANISM OF 3, 9,-DIALLYL-3, 9, -DIBENZYL-1, 5, 7, 11-TETRAOXASPIRO [5, 5] UNDECANE

A new monomer, 3,9-diallyl-3, 9-dibenzyl-1, 5,7,11 - tetraoxa- spiro [5,5] undecane (6) was prepared by the reaction of 2- allyl- 2' - benzyl- propanediol - 1.3 with dibutyltin oxide, and then treated with CS_2. Monomer 4 could be initiated by cationic initiators to give a viscous polymer (white powder in the case of polymerization at 0℃). Upon the NMR and IR spectra of the obtained polymer, the components and their relative amount were estimated. The polymerization mechanism was discussed.

SINGLE LANTHANUM TRIS(N-PHENYLETHYL-3,5-DI-t-BUTYLSALICYLALDIMINATO)S INITIATOR FOR RING-OPENING POLYMERIZATION OF 1,4-DIOXAN-2-ONE IN BULK

A rare earth Schiff base complex:lanthanum tris(N-phenylethyl-3,5-di-t-butylsalicylaldiminato)s [La(OPEBS)_3] was successfully applied as single component initiator for the ring-opening polymerization of 1,4-dioxan-2-one (PDO) in bulk.The influence of reaction conditions,such as polymerization temperature,the molar ratio of the monomer to initiator (M/I) on the monomer conversion and molecular weight of the polymer has been investigated.Poly(1,4-dioxan-2-one) with a viscosity-average molecular weight (My) o...

VINYL POLYMERIZATION OF NORBORNENE CATALYZED BY [2-(2-BENZIMIDAZOLYL)-6-((1-ARYLIMINOETHYL)PYRIDYL)]NICKEL CHLORIDE/MAO SYSTEM

The catalytic system of[2-(2-benzimidazolyl)-6-((1-aryliminoethyl)pyridyl)]nickel chloride/MAO(methylalu- minoxane)was found to be good active for vinyl polymerization of norbornene and provided polymers with relative narrow molecular distributions.Various reaction parameters,such as the ratios of nickel precursor to MAO or monomer norbornene, and the nature of the ligands in complexes were carefully investigated to realize their effects on the catalytic activities, polymer molecular weight and molecular we...

ROLE AND IMPORTANCE OF RADIUS OF GYRATION OF CHAINS IN THE MELT IN THE CRYSTALIZATION OF POLY(1-BUTENE)

Crystallization in polymer systems actually is a process that transfers the entangled melts into a semi-crystalline layered structure. Whether or not a chain disentangles may result in different crystallization mechanism. When compared to the crystal thickness (d(c)), the volume occupied by the chain in the melts i.e., the radius of gyration (R-g), plays a very important role in polymer crystallization. When d(c) less than or equal to R-g, crystallization does not necessitate a chain disentangling. The entanglements are just shifted into the amorphous regions. However, as d(c)>R-g, i.e., as the crystal thickness gets larger than the radius of gyration of the chain in the melt, it becomes necessary for a chain to disentangle. Then a change of crystallization mechanism occurs. Such change has been experimentally observed in the crystallization of poly(I-butene). A change in the crystal morphologies from spherulite to quadrangle, is seen via PLM, as crystallization temperatures increase. Even more, such a change is molecular weight dependent, and shifts to lower temperature as molecular weight decreases. There exists a jump of crystal thickness and crystallinity associated with morphological change, as seen via SAXS. A change of crystallization kinetics and crystallinity is further evidenced via dilatometry. The unique feature of P1b crystallization has been discussed based on the radius of gyration of chain in the melt (R-g), and very good agreement is obtained.

SYNTHESIS AND CATIONIC RING-OPENING POLYMERIZATION OF 1, 4-ANHYDRO-2, 3-DI-O-(P-AZIDOBENZYL)-α-D-RIBOPYRANOSE

New highly stereoregular 2, 3 -di- O-(p-azidobenzyl )-(1 →5 ) - α-D -ribofuranan was synthesized byselective ring-opening polymerization of 1, 4-anhydro-2, 3 - di-O -(p-azidobenzyl )-α-D -ribopyranose(ADABR) using phosphorus pentafluoride or tin tetrachloride as catalyst at low temperature indichloromethane. The monomer was obtained by the reaction of p - bromomethyl -phenyleneazide with 1, 4 -anhydro-α-D-ribose in DMF. The structure of poly(ADANR) was identified by specific rotation and ^(13)C-NMR spectroscopy. Acid chloride-AgCl_4 complex catalyst such as CH_2=C(CH_3)C^+OClO_4^- used in thepolymerization resulted in polymers with mixed structures, i.e. (1→5)-α-D-ribofuranosidic and (1→4)-β-D-ribopyranosidic units. However, with C_6H_5C^+OClO_4^- as catalyst, pure (1→5)-α-D-ribofuranan was obtained.The effects of catalyst, polymerization temperature and time on polymer stereoregularity were examined, andthe mechanism of the ring-opening polymerization was discussed.

Crystallization and Crystalline Structure of Syndiotactic Polypropylene and Syndiotactic-Poly(1-Butene) Blend

The crystallization and crystalline structure of syndiotactic-polypropylene (sPP) and syndiotactic-poly(1-butene) (sPB) blend containing 10 (Bl-10), 25 (Bl-25), 50 (Bl-50), 75 (Bl-75), and 90 (Bl-90) wt% of sPB, have been investigated by means of differential scanning calorimetry (DSC), FT-IR, and wide-angle X-ray diffraction (WAXD) analyses. The melt-crystallization behavior of the blend samples was studied by DSC on the cooling process at constant rates. Bl-50, Bl-75, and Bl-90 showed lower crystallization temperatures than the neat sPP. sPP in Bl-75 showed the lowest crystallization rate among the blend samples. Bl-90 showed a two-phase molten state, and sPP in Bl-90 crystallized via two-stepprocess. Time evolution of FT-IR spectroscopy at room temperature detected conformational transformation of the sPP polymer chain in the blend samples of Bl-50 and Bl-75. The absorption peaks intensity in the FT-IR spectra derived from the helical conformations in the crystalline phase decreased, and the planar zigzag conformations in the amorphous and mesophase phases decreased over the crystallization time. The time evolution of the WAXD profile of Bl-90 indicated that sPP in the blend accelerated the crystallization of sPB. The crystallized Bl-10, Bl-25, and Bl-50 samples showed diffraction peaks in WAXD profiles and melting endothermic peak in DSC profiles derived from only the sPP crystal. The crystallinity and melting temperature of sPP in the crystallized Bl-10, Bl-25, and Bl-50 samples were almost independent of the sPB content. Both the crystalline structure of sPP and sPB were detected in Bl-75 and Bl-90. Bl-75 showed the lowest crystallinity and melting temperature of sPP among the blend samples.

STUDY ON THE CATIONIC POLYMERIZATION OF 1, 3-PENTADIENE INITIATED BY AlCl_3/ALKYL HALIDE SYSTEMS

The cationic polymerizations of 1, 3-pentadiene were initiated by AlCl_3 in n-hexaneat 30℃ in the presence of alkyl halides, i.e., tert-butyl chloride, tert-butyl bromide andisobutyl chloride. The effects of these halides on the polymer yield, molecular weight,crosslinking reaction, cyclization and polymer microstructure, have been investigated. Twomain side reactions, crosslinking and cyclization, were suppressed and reduced by theaddition of the halides. The proportion of 1, 4 units of polymer chains was increasedby the presence of the halides, which reduced the polymer yield and the molecular weightof polymers.

OBD-1(黑色)可逆热致变色微胶囊制备及其在防伪领域的应用

当今社会,假冒伪劣产品泛滥,给社会经济带来严重的负面影响。旨在研发一种灵敏度高、温变区间小、耐酸耐碱的OBD-1(黑色)可逆热致变色微胶囊,并将其应用在温变防伪涂料。选取黑色发色剂OBD-1、双酚A、十六醇为芯材料,脲醛树脂为壁材料,通过原位聚合法制备微胶囊。利用显微镜观察微胶囊的外部形貌,通过激光粒径测定仪对微胶囊粒径及粒径分布范围进行了测定,考察了微胶囊制备时的不同的制备条件对微胶囊粒径大小和样品性能的影响,并得到最佳制备比例。

3-甲基-1-戊烯-4-炔-3-醇合成工艺的改进

以液氨和金属钙为原料通过氨基化制得氨基钙,经炔化得到乙炔钙,乙炔钙再与甲基乙烯酮反应制得乙炔醇钙盐,经水解、挥发氨、水蒸气蒸馏、萃取、回收溶剂、粗馏、精馏制得3-甲基-1-戊烯-4-炔-3-醇。考察金属试剂、催化剂硝酸高铁投入量、阻聚剂和萃取剂对合成及产物的影响。结果表明,选用金属钙作为金属试剂,催化剂硝酸高铁投入量为金属钙质量的0.8%,改性复合阻聚剂和CH2Cl2萃取剂较为合适。该工艺合成路线得到的3-甲基-1-戊烯-4-炔-3-醇纯度达98%以上,物质的量收率71.0%。

浅谈单气1区块优快钻井液技术

单气1区块位于济阳坳陷滨县凸起,由于地层造浆严重,浅层定向过程中常常发生阻卡事故,严重滞缓钻井进程。在优选聚合醇润滑防塌钻井液体系的基础上,现场针对不同井段采用相应的钻井液处理技术,确保单气1-斜1井和单气1-斜5井顺利完钻,井身质量好,机械钻速快,达到了优质高效钻井的目的。

利用分子标记辅助选择聚合水稻抗病基因Pigm-1和Xa23

【目的】创制抗稻瘟病和白叶枯病水稻新材料。【方法】以携带抗稻瘟病基因Pigm-1的双抗77009和抗白叶枯病基因Xa23的IRBB23为父本,以象牙香占为母本,利用杂交和复交方法,借助于分子标记辅助选择技术,在分离世代对目标基因进行检测,结合田间多代选育和抗性鉴定,选育多抗、综合性状优良的5个稳定株系,分析其农艺性状;然后利用三系不育系靓香A分别与象牙香占及5个稳定株系进行杂交配组,对杂交组合的农艺性状和品质性状进行分析,并对5个稳定株系进行恢复基因检测。【结果】获得R21-1、R21-2、R21-3、R21-4和R21-5 5个均含有Xa23和Pigm-1双基因稳定聚合系,这5个改良系对稻瘟病和白叶枯病均具有较好的抗性。不育系靓香A与5个稳定株系的杂交组合中,只有组合靓香A/R21-1表现结实正常,而其余组合均表现半不育;与亲本R21-1相比,组合靓香A/R21-1的有效穗数、每穗颖花数均表现优异亲本R21-1的特性,整精米率表现显著提高,米质可以达到二级部颁优质米标准。【结论】创制了5个稳定的Xa23和Pigm-1双基因聚合系,其中改良系R21-1含有恢复基因Rf3,可用于水稻多基因聚合育种。