期刊文献+
共找到259篇文章
< 1 2 13 >
每页显示 20 50 100
Diagnostics of electron temperature and ions distribution in expanding Al plasmas pumped by a ns-pulsed 1.06μm laser
1
作者 蓝可 常铁强 +2 位作者 冯庭桂 张兴宏 黄天瑄 《Plasma Science and Technology》 SCIE EI CAS CSCD 2001年第4期903-913,共11页
Resonance lines are extensively used to diagnose electronic temperature Te and ions distribution. However, the analysis of the x-ray spectroscopy emitted from plasmas produced by a ns laser Jsually needs the help of a... Resonance lines are extensively used to diagnose electronic temperature Te and ions distribution. However, the analysis of the x-ray spectroscopy emitted from plasmas produced by a ns laser Jsually needs the help of a code or some assumptions. In this paper, a diagnostic idea of using line-pairs emitted from a doubly-excited state is proposed. By using the method presented in this paper, Te and the fractional population ratio of bare nuclei and H-like ions are directly obtained from the emission intensity ratios. 展开更多
关键词 m laser Diagnostics of electron temperature and ions distribution in expanding Al plasmas pumped by a ns-pulsed 1.06 AL
下载PDF
Passively Q-Switched Yb-Doped Fiber Laser Operating at 1.06 μm with Two-Dimensional Silver Nanoplate as Saturable Absorber
2
作者 付圣贵 欧阳雪莹 +1 位作者 李金健 刘晓娟 《Chinese Physics Letters》 SCIE CAS CSCD 2017年第4期46-49,共4页
A two-dimensional silver nanoplate is prepared with the seed-mediated growth method and is used for achieving pulse fiber laser operation. By controlling the dimension parameters of the silver nanoplate, the surface p... A two-dimensional silver nanoplate is prepared with the seed-mediated growth method and is used for achieving pulse fiber laser operation. By controlling the dimension parameters of the silver nanoplate, the surface plasmon resonance absorption peak of the material is successfully adjusted to 1068 nm. Based on the silver nanoplate as a saturable absorber, a passively Q-switched Yb-doped fiber laser operating at 1062 nm is demonstrated. The maximum average output power of 3.49mW is obtained with a minimum pulse width of 1.84#s at a pulse repetition rate of 65.TkHz, and the corresponding pulse energy and peak power are 53.1 nJ and 28.8mW, respectively. 展开更多
关键词 YB m with Two-Dimensional Silver Nanoplate as Saturable Absorber Passively Q-Switched Yb-Doped Fiber laser Operating at 1.06
下载PDF
1.06μm激光大气透过特性的数值计算研究 被引量:15
3
作者 刘伟超 齐琳琳 +2 位作者 何宏让 吴洪星 杨元龙 《激光与红外》 CAS CSCD 北大核心 2011年第5期520-524,共5页
利用Modtran大气辐射传输模型,分析大气环境对1.06μm激光透过特性的影响,包括大气分子,气溶胶,雾,降雨,水平能见度以及不同的探测路径对1.06μm激光透过特性的影响。研究表明,1.06μm激光在大气传输中大气分子吸收效果非常小,基本可忽... 利用Modtran大气辐射传输模型,分析大气环境对1.06μm激光透过特性的影响,包括大气分子,气溶胶,雾,降雨,水平能见度以及不同的探测路径对1.06μm激光透过特性的影响。研究表明,1.06μm激光在大气传输中大气分子吸收效果非常小,基本可忽略不计;气溶胶对其的影响则较大,且透过率随着能见度的降低而减小;雾和降雨对激光的衰减作用非常明显,在大雾或者中雨大雨的条件下,激光的透过率非常小,基本很难通过。这些结论对于1.06μm激光制导武器的论证、研制、仿真和作战具有积极的意义。 展开更多
关键词 大气光学 1.06μm激光 mODTRAN 大气环境
下载PDF
1.06μm激光的大气传输特性 被引量:44
4
作者 杨洋 赵远 +2 位作者 乔立杰 刘世刚 南京达 《红外与激光工程》 EI CSCD 1999年第1期15-19,35,共6页
利用国内外现有资料对106μm激光的大气传输特性进行了分析归纳,得到了一些有价值的结论,并提出了一些推论。文中指出:106μm激光在大气中传输时其分子吸收效果可视为0,分子散射效果可忽略,气溶胶的吸收效果较小,故... 利用国内外现有资料对106μm激光的大气传输特性进行了分析归纳,得到了一些有价值的结论,并提出了一些推论。文中指出:106μm激光在大气中传输时其分子吸收效果可视为0,分子散射效果可忽略,气溶胶的吸收效果较小,故只需考虑气溶胶的散射效果;106μm激光在相同传输距离情况下在地面水平传输时衰减最大,而随着距地面高度的增加,衰减明显减少,至40km处衰减几乎为0。比较了106μm与106μm两种激光的传输特性。 展开更多
关键词 1.06μm激光 散射 吸收 大气传输 固体激光器
下载PDF
1.06μm InGaAs/InGaAsP量子阱半导体激光器的温度特性 被引量:6
5
作者 李再金 芦鹏 +4 位作者 李特 曲轶 薄报学 刘国军 马晓辉 《发光学报》 EI CAS CSCD 北大核心 2012年第6期647-650,共4页
研究了1.06μm InGaAs/InGaAsP量子阱半导体激光器厘米bar模块的温度特性,测试分析了该模块的输出光功率、阈值电流、转换效率和光谱随注入电流及管芯温度变化的特性。结果表明,器件在15~55℃范围内所测的输出光功率由40.7 W降低到29.4... 研究了1.06μm InGaAs/InGaAsP量子阱半导体激光器厘米bar模块的温度特性,测试分析了该模块的输出光功率、阈值电流、转换效率和光谱随注入电流及管芯温度变化的特性。结果表明,器件在15~55℃范围内所测的输出光功率由40.7 W降低到29.4 W,阈值电流由9.29 A升高到17.24 A,转换效率由54.22%降低到37.55%,光谱漂移为0.37 nm/℃,特征温度为68.6 K。实验结果表明,为保持器件性能的稳定,在实际应用过程中应该使器件的温度控制在15~25℃范围内。 展开更多
关键词 半导体激光器 1.06μm 阈值电流 温度特性
下载PDF
1.06μm激光半主动制导的目标与大气环境模型 被引量:21
6
作者 丛明煜 邵成勋 王学孝 《红外与激光工程》 EI CSCD 2000年第4期71-77,共7页
文中给出了一种用于估算 1.0 6 μm激光半主动制导兵器导引头最大捕获距离的简单实用的模型 ,此模型由激光的大气环境传输子模型、目标子模型和目标获取子模型组成 ,将 1.0 6 μm激光复杂的大气传输特性做了现象化、简单化和解释化的处... 文中给出了一种用于估算 1.0 6 μm激光半主动制导兵器导引头最大捕获距离的简单实用的模型 ,此模型由激光的大气环境传输子模型、目标子模型和目标获取子模型组成 ,将 1.0 6 μm激光复杂的大气传输特性做了现象化、简单化和解释化的处理 ,指出影响传输特性和捕获距离的重要因素是大气中的气溶胶含量 ,而气溶胶含量对激光的衰减作用依赖于它的颗粒大小的分布和浓度 ,同时也考虑了降雨和降雪量对激光传输衰减系数的影响。在目标子模型里将目标描述为一漫反射的球体来模拟坦克炮塔。本模型可用于激光半主动制导兵器目标捕获距离的计算机仿真计算 ,将此模型的计算结果与MICOM的激光末制导炮弹导引头捕获距离的试验结果相比较 。 展开更多
关键词 激光半主动制导 大气环境模型 激光器
下载PDF
利用LOWTRAN7研究1.06μm激光大气传输特性 被引量:6
7
作者 刘启涛 李迎春 马永成 《装备指挥技术学院学报》 2007年第6期96-99,共4页
激光在大气中的传输特性是影响激光武器技术指标的重要因素。激光在大气中传输时,会受到气体分子和气溶胶粒子、尘埃、雾、雨等对激光信号的吸收和散射,导致激光信号能量的衰减;此外,还受大气湍流的影响。利用国际公认的大气传输特... 激光在大气中的传输特性是影响激光武器技术指标的重要因素。激光在大气中传输时,会受到气体分子和气溶胶粒子、尘埃、雾、雨等对激光信号的吸收和散射,导致激光信号能量的衰减;此外,还受大气湍流的影响。利用国际公认的大气传输特性仿真软件包LOWTRAN7,计算分析了1.06μm激光在多种条件下的传输特性,计算结果对今后进一步开展激光武器技术的研究具有一定的指导意义。 展开更多
关键词 1.06 μm激光 湍流 传输特性 LOWTRAN7软件包
下载PDF
常见自然地物对1.06μm激光反射特性研究 被引量:2
8
作者 陆君 李季波 《光电技术应用》 2015年第5期71-73,共3页
地物光谱反射特性通常采用直观的反射光谱曲线来研究,基于此通过分析双向反射比系数随激光反射角度的变化规律来研究常见自然地物对1.06μm激光的反射特性,直观且便于外场数据采集。通过外场试验测得了10余种常见自然地物的双向反射比系... 地物光谱反射特性通常采用直观的反射光谱曲线来研究,基于此通过分析双向反射比系数随激光反射角度的变化规律来研究常见自然地物对1.06μm激光的反射特性,直观且便于外场数据采集。通过外场试验测得了10余种常见自然地物的双向反射比系数,并按照激光反射能力对其进行了排序。研究表明,杂草、风化岩石、龙眼树、灌木丛等自然目标对1.06μm激光的反射能力较强。 展开更多
关键词 地物激光反射特性 双向反射比系数 1.06μm激光
下载PDF
LD泵浦的高性能微型全固化1.06μm激光器
9
作者 霍玉晶 何淑芳 《激光与红外》 CAS CSCD 北大核心 1999年第5期271-273,共3页
研制成微型1.06μm 全固态激光器。采用纵向同轴泵浦方式,独特的整体控温技术和小焦距非球面聚焦透镜,并把全部元件固化为一个整体,从而提高了器件效率、激光输出功率和光束指向稳定性。用2W 的LD得到1260m W TEM... 研制成微型1.06μm 全固态激光器。采用纵向同轴泵浦方式,独特的整体控温技术和小焦距非球面聚焦透镜,并把全部元件固化为一个整体,从而提高了器件效率、激光输出功率和光束指向稳定性。用2W 的LD得到1260m W TEM00 模1.06μm 激光稳定输出,输出功率不稳定度≤±2% ,光束方向稳定性优于0.01m rad/hr和0.03m rad/24hr。该器件体积小,效率高,使用方便。 展开更多
关键词 LD泵浦 激光器 微型 全固化
下载PDF
激光驾束制导1.06μm激光照射器的研究 被引量:3
10
作者 赵尚弘 白晋涛 +1 位作者 陈国夫 谢小平 《空军工程大学学报(自然科学版)》 CSCD 2001年第2期1-3,共3页
报道了激光驾束制导 1.0 6 μm激光源的实验研究结果。通过对三镜折叠腔进行传输矩阵分析和数值计算 ,筛选出一组能实现低阀值、高功率、稳定性好的优化腔参数。当泵浦功率为 2 4W时 ,获得了TEM0 0 模振荡的 6W输出功率 ,其光—光转换... 报道了激光驾束制导 1.0 6 μm激光源的实验研究结果。通过对三镜折叠腔进行传输矩阵分析和数值计算 ,筛选出一组能实现低阀值、高功率、稳定性好的优化腔参数。当泵浦功率为 2 4W时 ,获得了TEM0 0 模振荡的 6W输出功率 ,其光—光转换效率为 2 5%。 展开更多
关键词 激光照射器 1.06μm激光 ND:YVO4激光器 激光驾束制导 指令制导 传输矩阵
下载PDF
水雾中1.06μm激光辐射的衰减特性 被引量:2
11
作者 袁辉 郝明磊 +1 位作者 李凡显 史倩义 《红外与激光工程》 EI CSCD 北大核心 2018年第10期174-180,共7页
通过试验研究了1.06μm激光辐射在水雾环境中的衰减特性。定量测量了不同气象光学视程(MOR)的水雾对1.06μm激光辐射的衰减程度,计算了水雾环境下的1.06μm激光辐射的等效"MOR"。分别采用试验数据和经验公式计算了1.06μm激... 通过试验研究了1.06μm激光辐射在水雾环境中的衰减特性。定量测量了不同气象光学视程(MOR)的水雾对1.06μm激光辐射的衰减程度,计算了水雾环境下的1.06μm激光辐射的等效"MOR"。分别采用试验数据和经验公式计算了1.06μm激光辐射在不同能见度条件下的消光系数。通过对比发现由经验公式计算的消光系数存在明显偏差,尤其是在低能见度条件下。基于试验数据,推导了一种以可见光能见度为输入的消光系数计算公式,对估计云雾环境下近红外光辐射的衰减特性具有重要参考价值。 展开更多
关键词 衰减特性 消光系数 1.06μm激光 气象光学视程
下载PDF
光电成像系统对1.06μm激光光斑探测能力研究 被引量:5
12
作者 安晓强 朱斌 卿荣生 《激光技术》 CAS CSCD 北大核心 2001年第6期441-445,共5页
分析与计算了光电成像系统对 1.0 6 μm激光光斑的探测性能 ,根据计算结果 ,设计了一个与特定CCD摄像机相匹配的光学成像物镜 ,最后给出了实验结果。
关键词 激光光斑 光学成像物理 探测能力 光电成像系统 1.06μm CCD摄像机 光斑探测
下载PDF
1.06μm激光末制导炮弹导引头接收能量模型 被引量:2
13
作者 刘兆辉 严彦文 《四川兵工学报》 CAS 2005年第6期21-23,共3页
本文给出了一种用于估算1.06μm激光末制导炮弹导引头接收能量的简单实用模型,对1.06μm激光大气传输特性做了简单化的处理,指出影响传输特性的重要因素是大气的散射。在目标模型里将目标描述为一漫反射的球体来模拟坦克炮塔。文章最后... 本文给出了一种用于估算1.06μm激光末制导炮弹导引头接收能量的简单实用模型,对1.06μm激光大气传输特性做了简单化的处理,指出影响传输特性的重要因素是大气的散射。在目标模型里将目标描述为一漫反射的球体来模拟坦克炮塔。文章最后得出结论即在一定的条件下影响末制导炮弹接收能量的主要因素是激光照射器照射目标的位置。 展开更多
关键词 1.06μm激光 激光末制导炮弹 大气传输
下载PDF
Thulium laser treatment for bladder cancer 被引量:16
14
作者 Wei Wang Haitao Liu Shujie Xia 《Asian Journal of Urology》 2016年第3期130-133,共4页
Recent innovations in thulium laser techniques have allowed application in the treatment of bladder cancer.Laser en bloc resection of bladder cancer is a transurethral procedure that may offer an alternative to the co... Recent innovations in thulium laser techniques have allowed application in the treatment of bladder cancer.Laser en bloc resection of bladder cancer is a transurethral procedure that may offer an alternative to the conventional transurethral resection procedure.We conducted a review of basic thulium laser physics and laser en bloc resection procedures and summarized the current clinical literature with a focus on complications and outcomes.Literature evidence suggests that thulium laser techniques including smooth incision,tissue vaporization,and en bloc resection represent feasible,safe,and effective procedures in the treatment of bladder cancer.Moreover,these techniques allow improved specimen orientation and accurate determination of invasion depth,facilitating correct diagnosis,restaging,and reevaluation of the need for a second resection.Nonetheless,large-scale multicentre studies with longer follow-up are warranted for a robust assessment.The present review is meant as a quick reference for urologists. 展开更多
关键词 Thulium laser 2-μm continuous laser Bladder cancer En bloc resection Transurethral resection of bladder tumor Holmium laser
下载PDF
In vitro comparison of the vaporesection of human benign prostatic hyperplasia using 70-and 120-W 2μm lasers 被引量:7
15
作者 Guang-Heng Luo Shu-Jie Xia Zhao-Lin Sun 《Asian Journal of Andrology》 SCIE CAS CSCD 2011年第4期636-639,共4页
The purpose of the current ex vivo study was to compare the speed of vaporesection of human prostatic tissue with benign prostatic hyperplasia (BPH) and the depth of tissue damage using 70- and 120-W 2-tim laser dev... The purpose of the current ex vivo study was to compare the speed of vaporesection of human prostatic tissue with benign prostatic hyperplasia (BPH) and the depth of tissue damage using 70- and 120-W 2-tim laser devices. Fresh prostatic tissue specimens were obtained from five patients by open prostatectomy, and were divided into separate groups (70 and 120 W) based on the energy of the laser output (70 and 120 W, respectively). The vaporesection speed, coagulation zone depth and the necrotic tissue layer in the prostatic tissue were evaluated. The current result showed that the speeds (mean±s.d.) of vaporesection were 5.21±0.66 and 10.39±1.15 g/5 min for the 70 and 120 W groups, respectively (P=0.000). There was no difference in the depth of necrosis/ coagulation (0.98±0.1310.30±0.09 and 0.99±0.12/0.31±0.08 mm) for the 70 and 120 W groups, respectively. In conclusion, both 70- and 120-W 2μm laser devices had superficial tissue damage during the vaporesection of human prostate tissue; moreover, the 120-W laser offers a higher vaporesection speed than the 70-W laser. 展开更多
关键词 benign prostatic hyperplasia VAPORESECTION 2μm laser
下载PDF
Observation and optimization of 2 μm mode‐locked pulses in all‐fiber net anomalous dispersion laser cavity 被引量:4
16
作者 Wanzhuo Ma Desheng Zhao +5 位作者 Runmin Liu Tianshu Wang Quan Yuan Hao Xiong Haiying Ji Huilin Jiang 《Opto-Electronic Advances》 SCIE 2020年第11期10-17,共8页
We integrally demonstrate 2μm mode-locked pulses performances in all-fiber net anomalous dispersion cavity.Stable mode-locking operations with the center wavelength around 1950–1980 nm can be achieved by using the n... We integrally demonstrate 2μm mode-locked pulses performances in all-fiber net anomalous dispersion cavity.Stable mode-locking operations with the center wavelength around 1950–1980 nm can be achieved by using the nonlinear polarization rotation structure and properly designing the dispersion management component.Conventional soliton is firstly obtained with a total anomalous dispersion cavity.Due to the contribution of commercial ultra-high numerical aperture fibers,net dispersion is reduced to-0.077 ps2.So that stretched pulse with 19.4 nm optical bandwidth is obtained and the de-chirped pulse-width can reach 312 fs using extra-cavity compression.Under pump power greater than 890 mW,stretched pulse can evolve into noise-like pulse with 41.3 nm bandwidth.The envelope and peak of such broadband pulse can be compressed with up to 2.2 ps and 145 fs,respectively.The single pulse energy of largely chirped stretched and noise-like pulse can reach 1.785 nJ and 1.53 nJ,respectively.Furthermore,extra-cavity compression can also contribute to a significant increase of peak power. 展开更多
关键词 fiber lasers mode-locked lasers 2μm fiber lasers
下载PDF
Low noise,continuous-wave single-frequency 1.5-μm laser generated by a singly resonant optical parametric oscillator 被引量:3
17
作者 刘建丽 刘勤 +2 位作者 李宏 李鹏 张宽收 《Chinese Physics B》 SCIE EI CAS CSCD 2011年第11期312-316,共5页
We report a low noise continuous-wave (CW) single-frequency 1.5-μm laser source obtained by a singly resonant optical parametric oscillator (SRO) based on periodically poled lithium niobate (PPLN). The SRO was ... We report a low noise continuous-wave (CW) single-frequency 1.5-μm laser source obtained by a singly resonant optical parametric oscillator (SRO) based on periodically poled lithium niobate (PPLN). The SRO was pumped by a CW single-frequency Nd:YVO4 laser at 1.06μm. The 1.02 W of CW single-frequency signal laser at 1.5 μm was obtained at pump power of 6 W. At the output power of around 0.75 W, the power stability was better than ±l.5% and no mode-hopping was observed in 30 min and frequency stability was better than 8.5 MHz in 1 min. The signal wavelength could be tuned from 1.57 to 1.59 μm by varying the PPLN temperature. The 1.5-μm laser exhibits low noise characteristics, the intensity noise of the laser reaches the shot noise limit (SNL) at an analysis frequency of 4 MHz and the phase noise is less than 1 dB above the SNL at analysis frequencies above 10 MHz. 展开更多
关键词 singly resonant optical parametric oscillator 1.5-μm laser single-frequency operation low noise
下载PDF
An Innovative Gas Sensor with On-Chip Reference Using Monolithic Twin Laser 被引量:6
18
作者 张永刚 田招兵 +5 位作者 张晓钧 顾溢 李爱珍 祝向荣 郑燕兰 刘盛 《Chinese Physics Letters》 SCIE CAS CSCD 2007年第10期2839-2841,共3页
An innovative gas sensor with on-chip reference using a monolithic twin laser is proposed. In this sensor a monolithic twin laser generates two closer laser beams with slight different wavelengths alternatively, one p... An innovative gas sensor with on-chip reference using a monolithic twin laser is proposed. In this sensor a monolithic twin laser generates two closer laser beams with slight different wavelengths alternatively, one photodiode is used to catch both absorption and reference signals by time division multiplexing. The detection of nitrous oxide adopting this scheme using a 2.1 I^m antimonide laser and an InGaAs photodiode has been demonstrated experimentally with detection limit below i ppm. Using this on chip reference scheme the fluctuations from the optical path and devices can be compensated effectively; the sensor system is simplified distinctly. 展开更多
关键词 QUANTUm CASCADE laserS 2.1 mU-m DIODE-laserS SEmICONDUCTOR-laserS mQWlaserS ANTImONIDE TUNABILITY
下载PDF
MXene Ti_3C_2T_x saturable absorber for pulsed laser at 1.3 μm 被引量:2
19
作者 王聪 彭倩倩 +4 位作者 范秀伟 梁维源 张峰 刘杰 张晗 《Chinese Physics B》 SCIE EI CAS CSCD 2018年第9期124-127,共4页
The excellent optical properties of MXene provide new opportunities for short-pulse lasers. A diode-pumped passively Q-switched laser at 1.3 μm wavelength with MXene Ti3C2Tx as saturable absorber was achieved for the... The excellent optical properties of MXene provide new opportunities for short-pulse lasers. A diode-pumped passively Q-switched laser at 1.3 μm wavelength with MXene Ti3C2Tx as saturable absorber was achieved for the first time. The stable passively Q-switched laser has 454 ns pulse width and 162 kHz repetition rate at 4.5 W incident pumped power. The experimental results show that the MXene Ti3C2Tx saturable absorber can be used as an optical modulator to generate short pulse lasers in a solid-state laser field. 展开更多
关键词 mXene Ti3C2Tx passively Q-switched lasers 1.3 μm diode-pumped lasers
下载PDF
High-Power Single-Spatial-Mode GaSb Tapered Laser around 2.0 μm with Very Small Lateral Beam Divergence 被引量:3
20
作者 黄书山 张宇 +5 位作者 廖永平 杨成奥 柴小力 徐应强 倪海桥 牛智川 《Chinese Physics Letters》 SCIE CAS CSCD 2017年第8期59-62,共4页
We report high-power single-spatial-mode type-I GaSb-based tapered lasers fabricated on the InGaSb/AlGaAsSb material system. A straight ridge and three different tapered waveguide structures with varying flare angles ... We report high-power single-spatial-mode type-I GaSb-based tapered lasers fabricated on the InGaSb/AlGaAsSb material system. A straight ridge and three different tapered waveguide structures with varying flare angles are fabricated to optimize the output power and spatial-mode performance. The best devices exhibit single-spatial-mode operation with room-temperature output power up to 350?mW in continuous-wave mode at an emission wavelength around 2.0?μm with a very small far-field lateral divergence angle, which is beyond state of the art in terms of single-spatial-mode output power. 展开更多
关键词 High-Power Single-Spatial-mode GaSb Tapered laser around 2.0 m with Very Small Lateral Beam Divergence
下载PDF
上一页 1 2 13 下一页 到第
使用帮助 返回顶部