Fe46Co44B10/SiO2 nano-multilayers were synthesized by radio frequency magnetron sputtering. The thickness of individual layer was designed and controlled in nano-meter. The effect of thickness of ferromagnetic layer, ...Fe46Co44B10/SiO2 nano-multilayers were synthesized by radio frequency magnetron sputtering. The thickness of individual layer was designed and controlled in nano-meter. The effect of thickness of ferromagnetic layer, insulative layer or the total number of layers on the intrinsic characteristics and microwave permeability were investigated respectively. The results show that, saturation magnetization changes obviously with different thicknesses of ferromagnetic layer or insulative layer, but coercivity changes little and remains small. When the thickness of ferromagnetic layer and insulative layer keeps 1.5 and 1.3 nm respectively and the number of the total layers increases from 10 to 90, coercivity reduces and resistivity of the films improves from 0.25 to 2.22 π·m. The resonant frequency locates at the point higher than 2 GHz and the imaginary part of complex permeability at 2 GHz is larger than 150. These multilayer films can be applied in the field of micromagnetic devices or anti-interference of electromagnetic wave.展开更多
The transfer characteristics of amorphous indium-zinc-oxide thin film transistors are measured in the temperature range of 10-400K. The variation of electrical parameters (threshold voltage, field effect mobility, su...The transfer characteristics of amorphous indium-zinc-oxide thin film transistors are measured in the temperature range of 10-400K. The variation of electrical parameters (threshold voltage, field effect mobility, sub-threshold swing, and leafage current) with decreasing temperature are then extracted and analyzed. Moreover, the dom- inated carrier transport mechanisms at different temperature regions are investigated. The experimental data show that the carrier transport mechanism may change from trap-limited conduction to variable range hopping conduction at lower temperature. Moreover, the field effect mobilities are also extracted and simulated at various temperatures.展开更多
为探讨中高林龄杨树(Populus)光合生理特性对不同修枝强度的响应规律,以10年生三倍体毛白杨(triploid Populus tomentosa)无性系B301与S86为研究对象,采用轻度修枝(修去树冠下部1/3枝条)和重度修枝(修去树冠下部1/2枝条),以及未修枝杨...为探讨中高林龄杨树(Populus)光合生理特性对不同修枝强度的响应规律,以10年生三倍体毛白杨(triploid Populus tomentosa)无性系B301与S86为研究对象,采用轻度修枝(修去树冠下部1/3枝条)和重度修枝(修去树冠下部1/2枝条),以及未修枝杨树为对照,研究不同强度修枝对10年生毛白杨生长和生理特性的影响。结果表明:对于10年生中高龄杨树,修枝对树高、胸径、材积增长率无显著影响,但重度修枝能提高剩余叶片的净光合速率(P_(n))、蒸腾速率(T_(r))、气孔导度(G_(s)),增强单叶水平上物质合成的能力,而修枝对瞬时水分利用效率(WUE)影响不显著。从生长和光合角度综合分析,修去树冠下部1/2枝条能够改善10年生毛白杨生理状况,但对林木生长无明显促进作用。展开更多
Selective laser melting(SLM)has been applied to manufacture various alloy components with excellent properties,but its further application is restricted by the intrinsic defects.In this work,the internal defect distri...Selective laser melting(SLM)has been applied to manufacture various alloy components with excellent properties,but its further application is restricted by the intrinsic defects.In this work,the internal defect distributions in samples of three alloys(316L stainless steel,AlSi10Mg and Inconel 718)were investigated respectively,considering the effects of geometrical characteristics of the samples.The defects in the 316L stainless steel sample tend to be formed densely in the central part with large wall thickness,indicating a strong sensitivity to heat accumulation.Contrarily,the Inconel 718 sample shows a higher relative density with homogeneous defect distribution,indicating better formability for the SLM process.For the AlSi10Mg sample,the defect density keeps increasing as the deposition goes on.Typically,the defect density located at sample edges shows an abnormally high level comparing with the inner part,especially in the top sections of AlSi10Mg and Inconel 718 samples.The results are helpful for the geometrical design,the adjustment of building orientation and the further optimization of process parameters in the SLM process.展开更多
目的探讨去整合素金属蛋白酶10(a disintegrin and metalloprotease 10,ADAM10)和高迁移率族蛋白B1(high mobility group box-1 protein,HMGB1)与声门型喉癌患者病理特征及预后关系分析。方法回顾性收集2017年3月~2020年12月于南京医科...目的探讨去整合素金属蛋白酶10(a disintegrin and metalloprotease 10,ADAM10)和高迁移率族蛋白B1(high mobility group box-1 protein,HMGB1)与声门型喉癌患者病理特征及预后关系分析。方法回顾性收集2017年3月~2020年12月于南京医科大学附属南京医院确诊及治疗的声门型喉癌患者50例(观察组),另取相对喉癌组织切缘0.5cm以上部位标本作为对照组。观察并比较ADAM10和HMGB1在两组中的阳性表达率,分析其阳性表达与声门型喉癌患者的病理特征关系。单因素分析影响声门型喉癌预后的危险因素,Cox多因素回归分析声门型喉癌患者不良预后的独立危险因素。结果ADAM10和HMGB1在观察组的阳性表达率均高于对照组,差异均有统计学意义(P<0.05)。声门型喉癌组织中的ADAM10与淋巴结转移和T分级差异比较有统计学意义,而与年龄、性别、饮酒史、吸烟史、分化程度差异比较无统计学意义(P>0.05);HMGB1与分化程度差异比较有统计学意义(P<0.05),而与年龄、性别、饮酒史、吸烟史、淋巴结转移、T分级差异比较无统计学意义(P>0.05)。单因素分析结果表明,淋巴结转移、T分级、分化程度、ADAM10、HMGB1是患者预后的影响因素。Cox多因素回归分析结果表明,淋巴结转移、T3+T4分级、低分化程度、ADAM10阳性、HMGB1阳性为声门型喉癌患者预后不良的独立影响因素(P<0.05)。结论ADAM10和HMGB1可作为声门型喉癌不良预后的风险评估指标。展开更多
The characteristics of fine particulate pollution(PM10 and PM2.5) were measured at urban and suburban sites in Jinan during the 2008-2009 heating and non-heating seasons.The results showed that PM10 and PM2.5 pollutio...The characteristics of fine particulate pollution(PM10 and PM2.5) were measured at urban and suburban sites in Jinan during the 2008-2009 heating and non-heating seasons.The results showed that PM10 and PM2.5 pollution was quite serious,and PM mass concentration was higher during the heating season than the non-heating season.PM was the highest in the chemical factory and lowest in the development zone.The mass concentrations of PM10 and PM2.5 were linearly related,and the mass concentration ratio of PM2.5/PM10 was up to 0.59 in urban areas.PM pollution in Jinan was related to local meteorological factors:PM2.5 mass concentration and humidity were positively correlated,and PM2.5 mass concentration was negatively correlated with both click on the temperature and wind speed,although wind speed varied more.展开更多
基金Project(60771028) supported by the National Natural Science Foundation of ChinaProject(20091208) supported by the Postdoctoral Foundation of Central South UniversityProject(PM200815) supported by State Key Laboratory of Powder Metallurgy
文摘Fe46Co44B10/SiO2 nano-multilayers were synthesized by radio frequency magnetron sputtering. The thickness of individual layer was designed and controlled in nano-meter. The effect of thickness of ferromagnetic layer, insulative layer or the total number of layers on the intrinsic characteristics and microwave permeability were investigated respectively. The results show that, saturation magnetization changes obviously with different thicknesses of ferromagnetic layer or insulative layer, but coercivity changes little and remains small. When the thickness of ferromagnetic layer and insulative layer keeps 1.5 and 1.3 nm respectively and the number of the total layers increases from 10 to 90, coercivity reduces and resistivity of the films improves from 0.25 to 2.22 π·m. The resonant frequency locates at the point higher than 2 GHz and the imaginary part of complex permeability at 2 GHz is larger than 150. These multilayer films can be applied in the field of micromagnetic devices or anti-interference of electromagnetic wave.
基金Supported by the National Natural Science Foundation of China under Grant No 61574048the Pearl River S&T Nova Program of Guangzhou under Grant No 201710010172+1 种基金the International Science and Technology Cooperation Program of Guangzhou under Grant No 201807010006the Opening Fund of Key Laboratory of Silicon Device Technology under Grant No KLSDTJJ2018-6
文摘The transfer characteristics of amorphous indium-zinc-oxide thin film transistors are measured in the temperature range of 10-400K. The variation of electrical parameters (threshold voltage, field effect mobility, sub-threshold swing, and leafage current) with decreasing temperature are then extracted and analyzed. Moreover, the dom- inated carrier transport mechanisms at different temperature regions are investigated. The experimental data show that the carrier transport mechanism may change from trap-limited conduction to variable range hopping conduction at lower temperature. Moreover, the field effect mobilities are also extracted and simulated at various temperatures.
文摘为探讨中高林龄杨树(Populus)光合生理特性对不同修枝强度的响应规律,以10年生三倍体毛白杨(triploid Populus tomentosa)无性系B301与S86为研究对象,采用轻度修枝(修去树冠下部1/3枝条)和重度修枝(修去树冠下部1/2枝条),以及未修枝杨树为对照,研究不同强度修枝对10年生毛白杨生长和生理特性的影响。结果表明:对于10年生中高龄杨树,修枝对树高、胸径、材积增长率无显著影响,但重度修枝能提高剩余叶片的净光合速率(P_(n))、蒸腾速率(T_(r))、气孔导度(G_(s)),增强单叶水平上物质合成的能力,而修枝对瞬时水分利用效率(WUE)影响不显著。从生长和光合角度综合分析,修去树冠下部1/2枝条能够改善10年生毛白杨生理状况,但对林木生长无明显促进作用。
基金the National Key R&D Program of China(No.2018YFB1106100)Jiangsu Key Laboratory for Advanced Metallic Materials(No.BM2007204)。
文摘Selective laser melting(SLM)has been applied to manufacture various alloy components with excellent properties,but its further application is restricted by the intrinsic defects.In this work,the internal defect distributions in samples of three alloys(316L stainless steel,AlSi10Mg and Inconel 718)were investigated respectively,considering the effects of geometrical characteristics of the samples.The defects in the 316L stainless steel sample tend to be formed densely in the central part with large wall thickness,indicating a strong sensitivity to heat accumulation.Contrarily,the Inconel 718 sample shows a higher relative density with homogeneous defect distribution,indicating better formability for the SLM process.For the AlSi10Mg sample,the defect density keeps increasing as the deposition goes on.Typically,the defect density located at sample edges shows an abnormally high level comparing with the inner part,especially in the top sections of AlSi10Mg and Inconel 718 samples.The results are helpful for the geometrical design,the adjustment of building orientation and the further optimization of process parameters in the SLM process.
文摘目的探讨去整合素金属蛋白酶10(a disintegrin and metalloprotease 10,ADAM10)和高迁移率族蛋白B1(high mobility group box-1 protein,HMGB1)与声门型喉癌患者病理特征及预后关系分析。方法回顾性收集2017年3月~2020年12月于南京医科大学附属南京医院确诊及治疗的声门型喉癌患者50例(观察组),另取相对喉癌组织切缘0.5cm以上部位标本作为对照组。观察并比较ADAM10和HMGB1在两组中的阳性表达率,分析其阳性表达与声门型喉癌患者的病理特征关系。单因素分析影响声门型喉癌预后的危险因素,Cox多因素回归分析声门型喉癌患者不良预后的独立危险因素。结果ADAM10和HMGB1在观察组的阳性表达率均高于对照组,差异均有统计学意义(P<0.05)。声门型喉癌组织中的ADAM10与淋巴结转移和T分级差异比较有统计学意义,而与年龄、性别、饮酒史、吸烟史、分化程度差异比较无统计学意义(P>0.05);HMGB1与分化程度差异比较有统计学意义(P<0.05),而与年龄、性别、饮酒史、吸烟史、淋巴结转移、T分级差异比较无统计学意义(P>0.05)。单因素分析结果表明,淋巴结转移、T分级、分化程度、ADAM10、HMGB1是患者预后的影响因素。Cox多因素回归分析结果表明,淋巴结转移、T3+T4分级、低分化程度、ADAM10阳性、HMGB1阳性为声门型喉癌患者预后不良的独立影响因素(P<0.05)。结论ADAM10和HMGB1可作为声门型喉癌不良预后的风险评估指标。
基金Supported by Natural Science Foundation of Shandong Province(Grant No.Z2008E04)"Austria-China"international government cooperation project"Control of Fine Particles"(Nr.CN10/2007)Dr.Foundation of Shandong Jianzhu University(XNBS0920)
文摘The characteristics of fine particulate pollution(PM10 and PM2.5) were measured at urban and suburban sites in Jinan during the 2008-2009 heating and non-heating seasons.The results showed that PM10 and PM2.5 pollution was quite serious,and PM mass concentration was higher during the heating season than the non-heating season.PM was the highest in the chemical factory and lowest in the development zone.The mass concentrations of PM10 and PM2.5 were linearly related,and the mass concentration ratio of PM2.5/PM10 was up to 0.59 in urban areas.PM pollution in Jinan was related to local meteorological factors:PM2.5 mass concentration and humidity were positively correlated,and PM2.5 mass concentration was negatively correlated with both click on the temperature and wind speed,although wind speed varied more.