The C_(f)/Al composites were joined to the TC4 alloy via the laser-induced combustion joining method.The exothermic reaction of the interlayer provided the required energy for the joining process.By combining the theo...The C_(f)/Al composites were joined to the TC4 alloy via the laser-induced combustion joining method.The exothermic reaction of the interlayer provided the required energy for the joining process.By combining the theoretical calculation and experiment,the chemical composition of the Ni−Al−Zr interlayer was designed.The microstructure and mechanical properties of the joint were investigated.The results show that the addition of Zr slightly weakened the combustion reaction of exothermic interlayer but played a key role in the successful joining.Ni−Al−Zr interlayer reacted with substrates,forming a TiAl_(3)layer adjacent to TC4 alloy and NiAl_(3),Ni_(2)Al_(3)layers adjacent to the C_(f)/Al composites.Zr content dominated the microstructure and shear strength of the joint.When the Zr content was 5 wt.%under the joining pressure of 2 MPa,the joint had a maximum shear strength of 19.8 MPa.展开更多
An integrated low temperature nitriding process for TC4（Ti6Al4V） has been developed and the effect on wear resistance has been investigated. Through the process of solid solution strengthening—cold deformation—nit...An integrated low temperature nitriding process for TC4（Ti6Al4V） has been developed and the effect on wear resistance has been investigated. Through the process of solid solution strengthening—cold deformation—nitriding at 400℃, the TC4 alloy is nitrided on surface and dispersion strengthened in bulk at the same time. The white nitriding layer is formed after some time of nitriding. The nitriding speed increases with the deformation degree. The construction was investigated by XRD and the nitride is Ti3N（2-X）. The wear test was carried out and results exhibit that the nitrided samples have better wear resistance.展开更多
基金the financial supports from the National Natural Science Foundation of China(Nos.51975149,51905055)the Natural Science Foundation of Chongqing,China(No.cstc2020jcyj-msxmX0115)the Fundamental Research Funds for the Central Universities Project,China(No.2020CDJ-LHZZ 086).
文摘The C_(f)/Al composites were joined to the TC4 alloy via the laser-induced combustion joining method.The exothermic reaction of the interlayer provided the required energy for the joining process.By combining the theoretical calculation and experiment,the chemical composition of the Ni−Al−Zr interlayer was designed.The microstructure and mechanical properties of the joint were investigated.The results show that the addition of Zr slightly weakened the combustion reaction of exothermic interlayer but played a key role in the successful joining.Ni−Al−Zr interlayer reacted with substrates,forming a TiAl_(3)layer adjacent to TC4 alloy and NiAl_(3),Ni_(2)Al_(3)layers adjacent to the C_(f)/Al composites.Zr content dominated the microstructure and shear strength of the joint.When the Zr content was 5 wt.%under the joining pressure of 2 MPa,the joint had a maximum shear strength of 19.8 MPa.
基金Projects(51275105,51375106)supported by the National Natural Science Foundation of China
文摘An integrated low temperature nitriding process for TC4（Ti6Al4V） has been developed and the effect on wear resistance has been investigated. Through the process of solid solution strengthening—cold deformation—nitriding at 400℃, the TC4 alloy is nitrided on surface and dispersion strengthened in bulk at the same time. The white nitriding layer is formed after some time of nitriding. The nitriding speed increases with the deformation degree. The construction was investigated by XRD and the nitride is Ti3N（2-X）. The wear test was carried out and results exhibit that the nitrided samples have better wear resistance.
