Te is widely used in iron and steel industry. After adding a certain amount of Te in the steel, many physical and chemical properties can be improved. As a free-cutting element, a small amount of Te can significantly ...Te is widely used in iron and steel industry. After adding a certain amount of Te in the steel, many physical and chemical properties can be improved. As a free-cutting element, a small amount of Te can significantly improve the machinability of steel. The existing form of Te in the steel, the modification law of MnS inclusion by Te and the influence rule and mechanism of Te on the machinability of steel are summarized and expounded in detail, providing a reference for further study and development of Te-containing free-cutting steels.展开更多
Ballpoint pen tip steel, a super free-cutting stainless steel, exhibits excellent corrosion resistance and good machining properties. In this study, inductively coupled plasma spectroscopy, metallographic microscopy, ...Ballpoint pen tip steel, a super free-cutting stainless steel, exhibits excellent corrosion resistance and good machining properties. In this study, inductively coupled plasma spectroscopy, metallographic microscopy, and scanning electron microscopy were used to determine the elemental contents in five ballpoint pen tips and their components, morphologies, and inclusion distributions. The results showed that the steels were all S–Pb–Te super free-cutting ferritic stainless steel. The free-cutting phases in the steels were mainly Mn S, Pb, and small amounts of Pb Te. Mn S inclusions were in the form of chain distributions, and the aspect ratio of each size inclusion in the chain was small. The stress concentration effect could substantially reduce the cutting force when the material was machined. Some of the Pb was distributed evenly in the steel matrix as fine particles（1–2 μm）, and the rest of the Pb was distributed at the middle or at both ends of the Mn S inclusions. The Pb plays a role in lubrication and melting embrittlement, which substantially increases the cutting performance. Pb Te was also usually distributed in the middle and at both ends of the Mn S inclusions, and Te could convert the sulfides into spindles, thereby improving the cutting performance of the steel.展开更多
The effects of sulfur addition methods and Ca-Si treatment on the microstructure and properties of free-cutting non-quenched and tempered steel 30MnVS were investigated by using optical microscopy, SEM and tensile tes...The effects of sulfur addition methods and Ca-Si treatment on the microstructure and properties of free-cutting non-quenched and tempered steel 30MnVS were investigated by using optical microscopy, SEM and tensile test methods. The results show that sulfur addition methods influence the morphology of sulfides and the properties of 30MnVS slightly. Ca-Si treatment is beneficial for the formation of complex sulfides which normally have oxide cores, therefore, improving the distribution of sulfides in the tested steel and enhancing its toughness. The two methods, pyrite addition during LF process and S wire feeding during VD process, slightly influence the morphology and distribution of sulfides and the properties of 30MnVS; Ca addition not only promotes the nucleation of sulfides on the cores of calcium aluminate inclusions, but also creates modification effect on MnS, reducing the relative plasticity and hot deformability of sulfides during hot rolling process, thereby reducing the length/width value of sulfides and improving their distribution, and significantly enhancing its mechanical properties, in particular, the impact toughness increased by 30%.展开更多
基金Acknowledgements This work was financially supported by the National Key Research and Development Program of China （No. 2018YFB0704400）, the National Natural Science Foundation of China （Nos. 51474142 and 51671124） and the China Postdoctoral Science Foundation （No. 2018M632082）.
文摘Te is widely used in iron and steel industry. After adding a certain amount of Te in the steel, many physical and chemical properties can be improved. As a free-cutting element, a small amount of Te can significantly improve the machinability of steel. The existing form of Te in the steel, the modification law of MnS inclusion by Te and the influence rule and mechanism of Te on the machinability of steel are summarized and expounded in detail, providing a reference for further study and development of Te-containing free-cutting steels.
基金supported by the National Nature Science Foundation of China (No. 51474142)
文摘Ballpoint pen tip steel, a super free-cutting stainless steel, exhibits excellent corrosion resistance and good machining properties. In this study, inductively coupled plasma spectroscopy, metallographic microscopy, and scanning electron microscopy were used to determine the elemental contents in five ballpoint pen tips and their components, morphologies, and inclusion distributions. The results showed that the steels were all S–Pb–Te super free-cutting ferritic stainless steel. The free-cutting phases in the steels were mainly Mn S, Pb, and small amounts of Pb Te. Mn S inclusions were in the form of chain distributions, and the aspect ratio of each size inclusion in the chain was small. The stress concentration effect could substantially reduce the cutting force when the material was machined. Some of the Pb was distributed evenly in the steel matrix as fine particles（1–2 μm）, and the rest of the Pb was distributed at the middle or at both ends of the Mn S inclusions. The Pb plays a role in lubrication and melting embrittlement, which substantially increases the cutting performance. Pb Te was also usually distributed in the middle and at both ends of the Mn S inclusions, and Te could convert the sulfides into spindles, thereby improving the cutting performance of the steel.
基金supported by the National Natural Science Foundation of China (No.50874007) and Beijing Municipal Education Committee, China
文摘The effects of sulfur addition methods and Ca-Si treatment on the microstructure and properties of free-cutting non-quenched and tempered steel 30MnVS were investigated by using optical microscopy, SEM and tensile test methods. The results show that sulfur addition methods influence the morphology of sulfides and the properties of 30MnVS slightly. Ca-Si treatment is beneficial for the formation of complex sulfides which normally have oxide cores, therefore, improving the distribution of sulfides in the tested steel and enhancing its toughness. The two methods, pyrite addition during LF process and S wire feeding during VD process, slightly influence the morphology and distribution of sulfides and the properties of 30MnVS; Ca addition not only promotes the nucleation of sulfides on the cores of calcium aluminate inclusions, but also creates modification effect on MnS, reducing the relative plasticity and hot deformability of sulfides during hot rolling process, thereby reducing the length/width value of sulfides and improving their distribution, and significantly enhancing its mechanical properties, in particular, the impact toughness increased by 30%.
