Large-head variable-amplitude pump turbines(PTs) encounter serious transient hydraulic instability issues. To explore the evolution mechanisms of pressure fluctuations(PFs) and flow patterns inside large-head variable...Large-head variable-amplitude pump turbines(PTs) encounter serious transient hydraulic instability issues. To explore the evolution mechanisms of pressure fluctuations(PFs) and flow patterns inside large-head variable-amplitude PTs, the load rejection process(LRP) was investigated using a one-and three-dimensional coupled flow simulation approach. The temporal,spatial, and frequency characteristics of the fluctuating pressures were analyzed for four monitoring points using a combined time-frequency analysis approach. The results indicated that PFs during the LRP of large-head variable-amplitude PTs had a new fluctuation frequency component related to Dean vortices(DVs) in the volute, in addition to the common fluctuation frequency components related to rotor-stator interaction phenomena and local backflow vortices near the impeller inlet. The PF frequency component existed throughout the LRP and had a significant influence on the transient maximum pressure at the volute end. This study provides a useful theoretical guide for the design and optimization of large-head variable-amplitude PTs.展开更多
The Secondary Air System(SAS)plays an important role in the safe operation and performance of aeroengines.The traditional 1D-3D coupling method loses information when used for secondary air systems,which affects the c...The Secondary Air System(SAS)plays an important role in the safe operation and performance of aeroengines.The traditional 1D-3D coupling method loses information when used for secondary air systems,which affects the calculation accuracy.In this paper,a Cross-dimensional Data Transmission method(CDT)from 3D to 1D is proposed by introducing flow field uniformity into the data transmission.First,a uniformity index was established to quantify the flow field parameter distribution characteristics,and a uniformity index prediction model based on the locally weighted regression method(Lowess)was established to quickly obtain the flow field information.Then,an information selection criterion in 3D to 1D data transmission was established based on the Spearman rank correlation coefficient between the uniformity index and the accuracy of coupling calculation,and the calculation method was automatically determined according to the established criterion.Finally,a modified function was obtained by fitting the ratio of the 3D mass-average parameters to the analytical solution,which are then used to modify the selected parameters at the 1D-3D interface.Taking a typical disk cavity air system as an example,the results show that the calculation accuracy of the CDT method is greatly improved by a relative 53.88%compared with the traditional 1D-3D coupling method.Furthermore,the CDT method achieves a speedup of 2 to 3 orders of magnitude compared to the 3D calculation.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.52209108 and 52079034)Sichuan Science and Technology Program(Grant No.2023YFQ0021)+1 种基金the Natural Science Foundation of Heilongjiang Province,China(Grant No.LH2023E058)China Postdoctoral Science Foundation(Grant No.2022M720948)。
文摘Large-head variable-amplitude pump turbines(PTs) encounter serious transient hydraulic instability issues. To explore the evolution mechanisms of pressure fluctuations(PFs) and flow patterns inside large-head variable-amplitude PTs, the load rejection process(LRP) was investigated using a one-and three-dimensional coupled flow simulation approach. The temporal,spatial, and frequency characteristics of the fluctuating pressures were analyzed for four monitoring points using a combined time-frequency analysis approach. The results indicated that PFs during the LRP of large-head variable-amplitude PTs had a new fluctuation frequency component related to Dean vortices(DVs) in the volute, in addition to the common fluctuation frequency components related to rotor-stator interaction phenomena and local backflow vortices near the impeller inlet. The PF frequency component existed throughout the LRP and had a significant influence on the transient maximum pressure at the volute end. This study provides a useful theoretical guide for the design and optimization of large-head variable-amplitude PTs.
基金supported by the National Science and Technology Major Project,China(No.2017-III-0010-0036).
文摘The Secondary Air System(SAS)plays an important role in the safe operation and performance of aeroengines.The traditional 1D-3D coupling method loses information when used for secondary air systems,which affects the calculation accuracy.In this paper,a Cross-dimensional Data Transmission method(CDT)from 3D to 1D is proposed by introducing flow field uniformity into the data transmission.First,a uniformity index was established to quantify the flow field parameter distribution characteristics,and a uniformity index prediction model based on the locally weighted regression method(Lowess)was established to quickly obtain the flow field information.Then,an information selection criterion in 3D to 1D data transmission was established based on the Spearman rank correlation coefficient between the uniformity index and the accuracy of coupling calculation,and the calculation method was automatically determined according to the established criterion.Finally,a modified function was obtained by fitting the ratio of the 3D mass-average parameters to the analytical solution,which are then used to modify the selected parameters at the 1D-3D interface.Taking a typical disk cavity air system as an example,the results show that the calculation accuracy of the CDT method is greatly improved by a relative 53.88%compared with the traditional 1D-3D coupling method.Furthermore,the CDT method achieves a speedup of 2 to 3 orders of magnitude compared to the 3D calculation.
