Hydrothermal Synthesis and Crystal Structure of a Manganese(II) Coordination Polymer with 1,1′-Biphenyl-2,2′,6,6′-tetracarboxyl Acid and 2,2′:6,2′′-Terpyridine Ligands

The title compound {[Mn（H2BPTC）（tpy）（H2O）]·（H2O）3}, （1, H4BPTC = 1,1＇- biphenyl-2,2＇,6,6＇-tetracarboxylic acid, tby = 2,2＇：6,2＇-terpyridine） has been synthesized by the hydrothermal reaction, and its structure was determined by X-ray diffraction and characterized by elemental analysis, IR spectrum and thermogravimetric analysis. The crystal is of monoclinic, space group P21/c with a = 10.971（2）, b = 20.776（4）, c = 14.332（3） A, β = 109.25（3）°, MnC31H27N3O12, Mr = 688.50, V= 3084.1（10） A^3, Dc = 1.483 g/cm^3, F（000） = 1420, p = 0.498 mm^-1, S = 1.066 and Z = 4. The final refinement gave R = 0.0447 and wR = 0.1103 for 5107 observed reflections with I 〉 2σ（I）. The title complex has a {[Mn（H2BPTC）（tpy）（H2O）]}, chain structure, and the hydrogen bonding interactions make it more stable. Each chain is further connected to the adjacent ones through π…π, C-H…π and rich hydrogen bonds to form a metal-organic coordination polymer.

Synthesis and Characterization of a Novel Copoly(aryl ether ketone) Containing 4, 4'-Biphenyl-bis[4-phthalazin-1(2H)-one] Moiety

A new monomer of 4, 4-biphenyl-bis[4-phthalazin-1(2H)-one] was synthesized from biphenyl and phthalic anhydride, and a novel copoly(aryl ether ketone) (PPEK) was synthesized from 2, 2-bis(4-hydroxyphenyl)-propane (BPA), 4, 4'-biphenyl-bis-[4-phthalazin-1(2H)-one], 4, 4- difluorodiphenylketone (DFK). The monomer and copolymer were characterized by FT-IR and 1H-NMR. DSC and TGA were used to the novel polymer.

Hydrothermal Synthesis and Crystal Structure of One 3D Coordination Polymer of Cobalt(II) Achieved from 1,1′-Biphenyl-2,2′,6,6′-tetracarboxylic Acid Ligand

A new three-dimensional coordination polymer {[Co（BPTC）0.5（bix）]′（H2O）}n （1, H4BPTC = 1,1′-biphenyl-2,2′,6,6′-tetracarboxylic acid, bix = 1,3-bis（imidazol-l-ylmethyl）-benzene） has been synthesized by the hydrothermal method and characterized by IR, elemental analysis, and single-crystal X-ray analysis. The crystal is of orthorhombic, space group Pbcn with a = 13.2975（10）, b = 13.8424（12）, c = 22.6367（17） A, CoC22H19N4Os, Mr = 478.34, V = 4166.7（6） A3, Dc = 1.525 g/cm^3, F（000） = 1968,μ = 0.867 mm^-1, S = 1.023 and Z = 8. The final R = 0.0683 and wR = 0.1529 for 3655 observed reflections with I 〉 20（I）. In the title complex, the 2D Co-BPTC layer is formed through self-assembly of Co（II） ions and bridging BPTC4-ligands in a molar ratio of 2：1. The metal-organic lattice layers are further united together through the second bridging ligand bix to form a 3D metal-organic framework. The thermal stability of the title complex was studied by thermal gravimetric （TG） and differential thermal analysis （DTA）.

Synthesis, Structure and Fluorescence Properties of Tb(Ⅲ) Complex with Isonicotinic Acid and Biphenyl-2,2′-Dicarboxylic Acid

Terbium perchlorate reacted with isonicotinic acid （Hpya） and biphenyl-2,2＇-dicarboxylic acid （H2dpa） under hydrothermal condition, a new ternary terbium complex [ Tb （pya） （dpa） （H2O） n （ 1 ） was synthesized. The structure of the ternary complex was determined by X-ray single crystal diffraction and characterized by elemental analysis, fluorescence measurement. The fluorescence spectrum shows the title complex emits strong green light. The crystal data for the com- plex： monoclinic, P21/n space group, a =0.8908（5）nm, b = 1.0569（6）nm, c =2.0969（11）nm, β = 98.446（8）°, V = 1.9528（18） nm^3, Z = 4, R = 0.0241, wR2 = 0.0534. The center Tb3＋ ion is eight coordinated. The coordination polyhedron around Tb3 ＋ ion can be described as a distorted square antiprism. The complex forms an infinite one-dimenand sional alternating chain polymer by bridging carboxyl groups of pyadpa.

超声合成(4,4',6,6'-四叔丁基-2,2'-联苯基)酸式磷酸酯

以2,2'-二羟基-3,3',5,5'-四叔丁基联苯(DTTBB)为原料在超声作用下合成了氯代(4,4',6,6'-四叔丁基-2,2'-联苯基)磷酸酯(TBBPCI),再以三聚氰胺为催化剂,使TBBPCI在水中发生水解反应得到(4,4',6,6'-四叔丁基-2,2'-联苯基)酸式磷酸酯(TBBHP)。通过红外光谱、核磁共振氢谱、质谱及元素分析证实了产物结构。考察了原料配比、反应温度、超声振荡器输出电压、反应时间等因素对反应的影响,优化了反应条件。研究表明超声作用缩短了反应时间,原料配比为n(DTTBB)∶n(三氯氧磷)∶n(三乙胺)∶n(三聚氰胺)∶n(水)=1∶1.5∶2.05∶1∶22.8,酯化反应温度20℃,超声振荡器输出电压150V,超声作用下酯化反应时间15h,水解反应温度98℃,水解反应时间1.5h,收率可稳定在95%左右。

Hydrothermal Synthesis and Crystal Structure of a Novel Catena Co(Ⅱ) Complex Bridged by Biphenyl- 2,2′-dicarboxylate Divalent Anion

The title complex, [Co_2(bpdc)_2(bim)_4]_n(bpdc=biphenyl-2,2′-dicarboxylate dianion, bim=benzimidazole), was synthesized in a aqueous solution and its crystal structure was determined by means of X-ray diffraction. There are two different coordinated Co(Ⅱ) centers in the complex. The Co1 center has a deformed trigonal-bipyramidal geometry, while the Co2 center possesses a tetrahedral geometry. In addition, the two different coordination modes of bpdc ligands act as two kinds of bridges to link Co1 and Co2, resulting in a catena chain.

一步法合成二亚磷酸三(2,2'-联苯酚)酯

以三氯化磷和2,2'-联苯酚为原料,一步法合成了二亚磷酸三(2,2'-联苯酚)酯,通过质谱及核磁共振等方法对产品进行了表征,证实产品为目标化合物且纯度很高。考察了三乙胺用量、溶剂种类、反应时间以及反应温度等因素对产品收率的影响。最佳反应条件为:以氯仿为溶剂,n(三氯化磷)∶n(2,2'-联苯酚)∶n(三乙胺)=1∶1.5∶3.5,25℃下反应15 h。在此条件下制得的产品为白色晶体,收率为89.7%。对可能发生的副反应进行了探讨,当反应程度过低时,会生成含氯的副产物;而当反应过于剧烈时,生成三亚磷酸酯等副产物的几率增大。

4,4’-二氨基-2,2’-二羧基联苯的制备方法

文章采用4,4'-二硝基-2,2'-双三氟甲基联苯为原料,首先在甲醇中经镍催化加氢还原得到4,4'-二氨基-2,2'-双三氟甲基联苯,再与浓硫酸反应得到粗品,经甲醇重结晶后得到4,4'-二氨基-2,2'-二羧基联苯纯品。该方法具有反应收率高,反应容易控制,无产物位置异构体杂质,精制简单等优点。

2,2-二苄基-4,6-二苯基-1,3,5三硫环己烷的合成及香气研究

以对甲苯磺酸为催化剂,中间体二苄基二硫醇和苯甲醛为原料,无水乙醇为溶剂,合成了新型香料2,2-二苄基-4,6-二苯基-1,3,5三硫环己烷,产率为63.0%,用IR,1HNMR和MS证实了目标化合物结构,并对2,2-二苄基-4,6-二苯基-1,3,5三硫环己烷的香气进行了鉴定,结果表明2,2-二苄基-4,6-二苯基-1,3,5三硫环己烷具有浓郁的葱蒜气味,其阈值在水中为0.22×10^-6～0.37×10^-6mol/L,在植物油中为12×10^-6～15.33×10^-6mol/L。

2,2-二苯环丙烷酸农药中间体的对映体分离研究

利用Pirkle型(S,S)-Whelk-O1手性固定相对2,2-二苯环丙烷羧酸农药中间体进行了对映体分离研究。考察了在流动相正己烷中,异丙醇的浓度变化对手性分离的影响,初步探讨了其手性识别机理,结果表明,(S,S)-Whelk-O1上溶质与固定相之间主要是通过吸引作用发生手性识别。

超声合成3,3’,5,5’-四叔丁基2,2’-联苯二酚

超声辐照下,以2,4二叔丁基苯酚为原料合成了2,2’-二羟基-3,3’,5,5’-四叔丁基联苯。研究了超声强度、辐射时间、反应温度等对产物产率的影响,得出了最佳的合成反应条件:超声强度为5.04w/cm2,反应时间1.5h,反应温度90℃,原料用量(2,4二叔丁基苯酚:30%H2O2:NaOH:月桂酸)比为1:1.1:1:0.01时,产物收率达90.0%。结果表明该方法操作简单、反应速度快、产率高。

含能配位聚合物{[Ni(tnbpdc)(bpy)(H_2O)_2]·1.5(DMF)}_n的热分解机理和非等温热分解动力学研究

采用差示扫描量热(DSC)和热重-微分热重(TG-DTG)技术研究了含能配位聚合物{[Ni(T2-bpdc)(bpy)(H2O)2〗.1.5(DMF)}n在氮气中的热分解过程,推测了其热分解反应的可能机理。采用微分法和普适积分法对配位聚合物的两个放热分解过程进行动力学分析,求出该配位聚合物热分解的非等温动力学数据。结果显示,两个连续的放热分解过程均属于一维扩散机理模型,其动力学方程为da/dT=A/(2αβ)exp(-Ea/RT)。

Synthesis, Crystal Structure and Luminescence of a New Zn(Ⅱ) Dimer: [Zn(bpdc)(L)]_2·4H_2O

A new dimeric compound, [Zn（bpdc）（L）]2·4H2O（1, L = 11-fluoro-dipyrido[3,2-a：2＇,3＇-c]phenazine and bpdc = 1,1＇-biphenyl-2,2＇-dicarboxylate）, has been synthesized under hydrothermal conditions and characterized by single-crystal X-ray diffraction. It crystallizes in monoclinic, space group C2/c with a = 23.671（5）, b = 22.547（5）, c = 13.741（3）A, β = 123.47（3）°, V = 6118（2） A3, Z = 4, C66H44Cl2F2N8O12Zn2, Mr = 1380.73, Dc = 1.499 g/cm3, F（000） = 2816, μ（MoKa） = 0.949 mm-1, R = 0.0572 and wR = 0.1620. In 1, Zn1 and the symmetry formed Zn1 ions are connected by four bridging bidentate carboxylate groups from two independent bpdc anions to yield a binuclear unit with the Zn···Zn separation by bpdc anions of 4.168. Two L ligands are located on both sides of the dimer in chelating bidentate modes. The lateral L ligands from neighboring dimers are paired through strong π-π interactions to result in a fascinating 1D ladder-like supramolecular array. In addition, neighboring supramolecular ladders are packed each other to yield a 3D supramolecular architecture with a 1D channel.

基于2,2′,6,6′-联苯四酸的两个新配位聚合物的水热合成与晶体结构(英文)

通过2,2′,6,6′-联苯四酸与相应金属硝酸盐和第二配体的水热反应合成了2个具有不同结构的配位聚合物[Co(bta)0.5(2,2′-bipy)(H2O)]n(1)和{[Cd2(bta)(H2biim)2(H2O)].H2O}n(2)(H4bta=2,2′,6,6′-联苯四酸,2,2′-bipy=2,2′-联吡啶,H2biim=1H,1′H-2,2′-联咪唑),并测定了其晶体结构。1和2都是一维链结构,并且1和2都属于单斜晶系,P21/c空间群。bta配体在1和2中分别采取η6,μ4-六齿和η5,μ4-五齿配位模式,同时bta配体中2个苯环的夹角在化合物1和2中分别是64.80°和64.86°。1与2分别在170℃和120℃以下保持热稳定性。

2,2′-双三氟甲基-4,4′-二硝基联苯的制备方法

2,2′-双三氟甲基联苯在N-甲基吡咯烷酮中,与磺酰氯和硝酸铵在35~55℃下反应得到2,2′-双三氟甲基-4,4′-二硝基联苯。该方法具有原材料易于购买,收率较高,反应条件温和,后处理简单,收率高等优点。

Syntheses, Structures, and Properties of Three Coordination Polymers: [Cd_2(bpp)_(1.5)(Hbpp)(phen)_2]_n, [Mn_3(Htptc)_2(phen)_2(H_2O)_2]_n, and {[Cu(btc)_(0.5)(1,4-bib)]·2H_2O}_n

Hydrothermal reactions of three aromatic polycarboxylic acids and the transitional metal cations in the presence of phen and 1,4-bib afford three new coordination polymers： [Cd2（bpp）1.5（Hbpp）（phen）2]n （1）, [Mn3（Htptc）2（phen）2（H2O）2]n （2）, and {[Cu（btc）0.5（1,4- bib）]·2H2O}n（3） （H2bpp = 2,6-bis（4＇-carboxyphenyl）-4-phenylpyridine, H4tptc = terphenyl-2,5,2＇,5＇-tetracar- boxylic acid, H4btc =biphenyl-2,2＇,4,4＇-tetracarboxylic acid, phen =1,10-phenanthroline, and 1,4-bib = 1,4-bis（1H-imidazol-1-yl）benzene）. Their structures have been determined by single- crystal X-ray diffraction analyses, elemental analyses, IR spectra, and powder X-ray diffraction （PXRD） analyses. In compound 1, the CdII cations are linked by bpp2- to form one ladder structure, based on which a 3D network is constructed with the help of non-covalent interactions. The topology of 2 is a 3D （3,4,5）-connected framework with the Point Schl？fli symbol of （42.6）2（43.62.8）（45.64.8）2. Compound 3 shows an unprecedented 3D （4,4）-connected framework with the Point Schl？fli symbol of （64.82）2（65.8）. Moreover, the luminescent property of 1 has been investigated.

2,2',6,6'-四硝基-4,4'-二(三氟甲基)联苯的合成

以对氯三氟甲苯为原料,经硝硫混酸硝化得到3,5-二硝基对氯三氟甲苯,3,5-二硝基对氯三氟甲苯在铜粉催化下经Ullmann偶联反应得到2,2',6,6'-四硝基-4,4'-二(三氟甲基)联苯。硝化反应收率为93%;偶联反应的优化条件为:以甲苯为反应介质,m(C6H2ClCF3N2O4)∶m(Cu)=1∶0.25,110℃反应1.5h,偶联反应收率达73%以上。总收率可达68%。

氢氧化铝胶体对2,2′,4,4′-四溴联苯醚的吸附

溴代阻燃剂多溴联苯醚(polybrominated diphenyl ethers,PBDEs)是一种被广泛使用的阻燃剂,其对神经、甲状腺、肝脏等具有潜在毒性。其中,2,2′,4,4′-四溴联苯醚(BDE-47)作为一种重要单体,在环境介质中被广泛检出。胶体是环境中污染物迁移过程中的重要载体,它对有机污染物在土壤-地下水系统中的迁移有不可忽略的影响。开展典型无机胶体氢氧化铝胶体对BDE-47的吸附动力学和吸附热力学研究,以期为BDE-47在土壤-地下水中的迁移提供理论依据。结果表明:Sips等温吸附方程对该吸附过程拟合效果最佳(R_(adj)~2=0.943 94),计算得出氢氧化铝胶体对BDE-47的饱和吸附量为609.37 mg·g^(-1);吸附动力学实验结果显示,准二级反应动力学方程拟合氢氧化铝胶体对BDE-47吸附反应过程最佳(R_(adj)~2>0.95),同时该吸附反应速率随BDE-47浓度的升高逐渐减小;Van't Hoff方程拟合表明,吸附热力学参数标准反应焓变△H^0=40.506 kJ·mol^(-1)、标准反应熵变△S^0=0.075 7 kJ·(mol·K)^(-1),标准反应吉布斯自由能△G^0(298 K)=17.98 kJ·mol^(-1)。此外,反应体系的pH和阳离子种类及浓度均会影响氢氧化铝胶体对BDE-47的吸附过程。

一种基于联苯四羟酸配体的Co配合物的合成、表征及磁性研究

以合成具有优良性能的3D框架配合物为目的,选用四羧酸类6-硝基-[1,1′-联苯]-2,2′,4,4′-四羧酸(H4L)和1,2-双(4-吡啶基)(bpa)乙烷作为配体,与过渡金属Co在水热条件下合成一例具有新颖结构的配位聚合物.通过SXRD、TGA、FTIR、PXRD对其结构和性能进行了表征.分析表明配合物具有一维链结构,通过6-硝基-[1,1′-联苯]-2,2′,4,4′-四羧酸配体连接形成3D框架.配合物表现出良好的热稳定性和反铁磁性.

新型联苯酚双亚胺[ONS]三齿配体的合成

以2,2′-二羟基联苯为原料,经过羟基保护、羟基邻位甲酰化、去保护等反应,合成了2,2′-二羟基-[1,1′-联苯基]-3,3′-二醛,再与2-丙硫基苯胺通过希夫碱反应合成了一种新型的双水杨醛亚胺配体3,3′-双-[(2-丙硫基)-苯亚胺]-2,2′-二羟基联苯(5).所合成的化合物通过核磁氢谱、元素分析、红外光谱等手段进行了表征,目标产物5通过X射线单晶衍射进一步证实了其结构.双水杨醛亚胺配体5晶体结构表明两个相连的苯环不共平面,二面角为63.14°,且两个水杨醛亚胺中配位原子所在的键长、键角不同,说明与中心金属配位时产生了两个不同的活性中心.