The terpolymer of itaconic acid, acrylamide and 2-acrylamido-2-methyl-1-propane sulfonic acid was synthesized through the free-radical polymerization. The IR spectra confirmed that there was no olefinic band, while th...The terpolymer of itaconic acid, acrylamide and 2-acrylamido-2-methyl-1-propane sulfonic acid was synthesized through the free-radical polymerization. The IR spectra confirmed that there was no olefinic band, while the TGA results revealed that the terpolymer was of high thermal stability.展开更多
2-Acrylamido-2-methyl-1-propanesulfonic acid （AMPS）, and maleic acid （MA） copolymerized with different feed ratios using N,N-dimethylformamide as a solvent and benzoyl peroxide （Bz2O2） as an initiator at 70℃. S...2-Acrylamido-2-methyl-1-propanesulfonic acid （AMPS）, and maleic acid （MA） copolymerized with different feed ratios using N,N-dimethylformamide as a solvent and benzoyl peroxide （Bz2O2） as an initiator at 70℃. Structure and composition of copolymers for a wide range of monomer feed were determined by elemental analysis （content of N for AMPS-units）. Monomer reactivity ratios for AMPS （M1）-MA （M2） pair were determined by the application of conventional linearization methods such as Fineman-Ross （F-R）, Kelen-Tudos（KT） and Extended Kelen-Tudos （EKT） and a nonlinear error invariable model method using a computer program RREVM. The characterizations were done by Fourier transform infrared spectroscopy （FTIR）, differential scanning calorimetry （DSC） thermal gravimetry analysis （TGA）, and and X-ray diffraction. The antimicrobial effects of polymers were also tested on various bacteria, and yeast.展开更多
The BST oilfield in the northwestern Taklamakan Desert is a fractured carbonate reservoir,but issues of water breakthrough are becoming increasingly severe with the development of water flooding.Unfortunately,the high...The BST oilfield in the northwestern Taklamakan Desert is a fractured carbonate reservoir,but issues of water breakthrough are becoming increasingly severe with the development of water flooding.Unfortunately,the high-temperature and high-salt conditions(130°C,71695 mg/L)of the BST oilfield pose challenges for the development of plugging agents.In this study,the effects of 2-acrylamido-2-methylpropane sulfonic acid(AMPS)content on AM/AMPS copolymers and gels were studied through viscosity measurements,nuclear magnetic resonance(NMR),and cryo-scanning electron microscope(Cryo-SEM).Moreover,the AMPS stabilization mechanism of the polymers and gels was explained.Heatresistant and salt-tolerant gel systems were developed,and their gelation properties,thermal stability,injection capacity,and plugging ability were evaluated.Experimental results showed inconsistencies between the effects of AMPS content on the polymers and gels.For the polymers,the thermal stability increased with increased AMPS content in the polymer.However,excessive AMPS content resulted in poor gelation and low strength.The developed gel systems with S30 polymer(AMPS content is approximately 26%)exhibited excellent thermal stability,controllable gelation time,good injection capacity,and plugging ability.The field application results indicated that most production wells had a positive response,with reduced water-cut and increased daily oil production.展开更多
Scrap vulcanized rubber is amongst a bigger waste polymers. It does not decompose easily owing to its cross linked structure. Modification of scrap tires powder by the grafting with 2-acrylamido-2-methylpropanesulfoni...Scrap vulcanized rubber is amongst a bigger waste polymers. It does not decompose easily owing to its cross linked structure. Modification of scrap tires powder by the grafting with 2-acrylamido-2-methylpropanesulfonic acid (AMPS) is described. The grafting is achieved through free radical initiation. The effects of different amount of monomer and initiator were examined. Also the influence of reaction time and temperature were investigated. The grafted waste rubber was characterized by FT/IR, SEM and DSC measurements. The proposed mechanism of the grafting reaction is discussed. From DSC and SEM studies of WR-g-AMPS compared with PAMPS and WR, the results show that the particle size and crystallinity were enhanced for the grafted copolymers. The obtained modified scraped tires will used as an ion exchanger for the future applications.展开更多
A series of novel copolymers were successfully synthesized by ring-opening polymerization （ROP） of 3 （S）-methyl-morpholine-2,5-dione （MMD） and 5-methyl-5-benzyloxycarbonyl-1,3-dioxan-2-one （MBC） using stan- no...A series of novel copolymers were successfully synthesized by ring-opening polymerization （ROP） of 3 （S）-methyl-morpholine-2,5-dione （MMD） and 5-methyl-5-benzyloxycarbonyl-1,3-dioxan-2-one （MBC） using stan- nous octoate as catalyst. The copolymers were characterized by means of ~H-NMR and FT-IR spectroscopy. Gel permeation chromatography （GPC） test shows that the average-number relative molecular mass and average-weight rela- tive molecular mass slightly increase with the increase of MBC content in feed. The results of differential scanning calorimetry （DSC） demonstrate that the glass transition temperature of copolymers increases with the increase of MBC content in copolymers. The copolymers of MMD and MBC are amorphous copolymers, as indicated by DSC results, while the homopolymer of MMD is semicrystalline.展开更多
以2-丙烯酰胺基-2-甲基丙磺酸(AMPS)为基料,用水溶液引发聚合的方法合成了AMPS AM AA DEAM(2-丙烯酰胺基-2-甲基丙磺酸 丙烯酰胺 丙烯酸 二乙基丙烯酰胺)四元共聚物,对其水溶液性质进行了研究。结果表明此共聚物具有较好的抗高温、抗高...以2-丙烯酰胺基-2-甲基丙磺酸(AMPS)为基料,用水溶液引发聚合的方法合成了AMPS AM AA DEAM(2-丙烯酰胺基-2-甲基丙磺酸 丙烯酰胺 丙烯酸 二乙基丙烯酰胺)四元共聚物,对其水溶液性质进行了研究。结果表明此共聚物具有较好的抗高温、抗高盐能力,是一种新型的耐温抗盐驱油用聚合物。展开更多
文摘The terpolymer of itaconic acid, acrylamide and 2-acrylamido-2-methyl-1-propane sulfonic acid was synthesized through the free-radical polymerization. The IR spectra confirmed that there was no olefinic band, while the TGA results revealed that the terpolymer was of high thermal stability.
文摘2-Acrylamido-2-methyl-1-propanesulfonic acid （AMPS）, and maleic acid （MA） copolymerized with different feed ratios using N,N-dimethylformamide as a solvent and benzoyl peroxide （Bz2O2） as an initiator at 70℃. Structure and composition of copolymers for a wide range of monomer feed were determined by elemental analysis （content of N for AMPS-units）. Monomer reactivity ratios for AMPS （M1）-MA （M2） pair were determined by the application of conventional linearization methods such as Fineman-Ross （F-R）, Kelen-Tudos（KT） and Extended Kelen-Tudos （EKT） and a nonlinear error invariable model method using a computer program RREVM. The characterizations were done by Fourier transform infrared spectroscopy （FTIR）, differential scanning calorimetry （DSC） thermal gravimetry analysis （TGA）, and and X-ray diffraction. The antimicrobial effects of polymers were also tested on various bacteria, and yeast.
基金Financial support from the Major Scientific and Technological Project of CNPC under grant number ZD2019-183-007Sinopec Northwest Company of China for the financial support(34400007-17-ZC06070095)
文摘The BST oilfield in the northwestern Taklamakan Desert is a fractured carbonate reservoir,but issues of water breakthrough are becoming increasingly severe with the development of water flooding.Unfortunately,the high-temperature and high-salt conditions(130°C,71695 mg/L)of the BST oilfield pose challenges for the development of plugging agents.In this study,the effects of 2-acrylamido-2-methylpropane sulfonic acid(AMPS)content on AM/AMPS copolymers and gels were studied through viscosity measurements,nuclear magnetic resonance(NMR),and cryo-scanning electron microscope(Cryo-SEM).Moreover,the AMPS stabilization mechanism of the polymers and gels was explained.Heatresistant and salt-tolerant gel systems were developed,and their gelation properties,thermal stability,injection capacity,and plugging ability were evaluated.Experimental results showed inconsistencies between the effects of AMPS content on the polymers and gels.For the polymers,the thermal stability increased with increased AMPS content in the polymer.However,excessive AMPS content resulted in poor gelation and low strength.The developed gel systems with S30 polymer(AMPS content is approximately 26%)exhibited excellent thermal stability,controllable gelation time,good injection capacity,and plugging ability.The field application results indicated that most production wells had a positive response,with reduced water-cut and increased daily oil production.
文摘Scrap vulcanized rubber is amongst a bigger waste polymers. It does not decompose easily owing to its cross linked structure. Modification of scrap tires powder by the grafting with 2-acrylamido-2-methylpropanesulfonic acid (AMPS) is described. The grafting is achieved through free radical initiation. The effects of different amount of monomer and initiator were examined. Also the influence of reaction time and temperature were investigated. The grafted waste rubber was characterized by FT/IR, SEM and DSC measurements. The proposed mechanism of the grafting reaction is discussed. From DSC and SEM studies of WR-g-AMPS compared with PAMPS and WR, the results show that the particle size and crystallinity were enhanced for the grafted copolymers. The obtained modified scraped tires will used as an ion exchanger for the future applications.
基金Supported by Chinese Program for New Century Excellent Talents in University "NCET",Ministry of Education of P.R. China(No.2008DFA51170)
文摘A series of novel copolymers were successfully synthesized by ring-opening polymerization （ROP） of 3 （S）-methyl-morpholine-2,5-dione （MMD） and 5-methyl-5-benzyloxycarbonyl-1,3-dioxan-2-one （MBC） using stan- nous octoate as catalyst. The copolymers were characterized by means of ~H-NMR and FT-IR spectroscopy. Gel permeation chromatography （GPC） test shows that the average-number relative molecular mass and average-weight rela- tive molecular mass slightly increase with the increase of MBC content in feed. The results of differential scanning calorimetry （DSC） demonstrate that the glass transition temperature of copolymers increases with the increase of MBC content in copolymers. The copolymers of MMD and MBC are amorphous copolymers, as indicated by DSC results, while the homopolymer of MMD is semicrystalline.
文摘采用傅里叶变换红外光谱、紫外可见分光光度计及电导法,研究聚羧酸共聚物与Ca2+的作用情况,使用电导仪跟踪水泥水化过程中电导率的变化,以及共聚物对水泥初、终凝时间的影响.研究结果表明,聚羧酸共聚物与水泥水化产生的钙离子发生配位,延缓了水泥水化进程.当聚羧酸的质量分数为0.3%,42.5#水泥的初、终凝时间分别延缓了80 min和194 min.
