Numerical Models and Methods of Atmospheric Parameters Originating in the Formation of the Earth’s Climatic Cycle

Atmospheric models are physical equations based on the ideal gas law. Applied to the atmosphere, this law yields equations for water, vapor (gas), ice, air, humidity, dryness, fire, and heat, thus defining the model of key atmospheric parameters. The distribution of these parameters across the entire planet Earth is the origin of the formation of the climatic cycle, which is a normal climatic variation. To do this, the Earth is divided into eight (8) parts according to the number of key parameters to be defined in a physical representation of the model. Following this distribution, numerical models calculate the constants for the formation of water, vapor, ice, dryness, thermal energy (fire), heat, air, and humidity. These models vary in complexity depending on the indirect trigonometric direction and simplicity in the sum of neighboring models. Note that the constants obtained from the equations yield 275.156˚K (2.006˚C) for water, 273.1596˚K (0.00963˚C) for vapor, 273.1633˚K (0.0133˚C) for ice, 0.00365 in/s for atmospheric dryness, 1.996 in2/s for humidity, 2.993 in2/s for air, 1 J for thermal energy of fire, and 0.9963 J for heat. In summary, this study aims to define the main parameters and natural phenomena contributing to the modification of planetary climate. .

一种基于三角数分解的可配置2-D卷积器优化方法

多尺寸2-D卷积通过特征提取在检测、分类等计算机视觉任务中发挥着重要作用。然而,目前缺少一种高效的可配置2-D卷积器设计方法,这限制了卷积神经网络(CNN)模型在边缘端的部署和应用。该文基于乘法管理以及奇平方数的三角数分解方法,提出一种高性能、高适应性的卷积核尺寸可配置的2-D卷积器。所提2-D卷积器包含一定数量的处理单元(PE)以及相应的控制单元,前者负责运算任务,后者负责管理乘法运算的组合,二者结合以实现不同尺寸的卷积。具体地,首先根据应用场景确定一个奇数列表,列表中为2-D卷积器所支持的尺寸,并利用三角数分解得到对应的三角数列表;其次,根据三角数列表和计算需求,确定PE的总数量;最后,基于以小凑大的方法,确定PE的互连方式,完成电路设计。该可配置2-D卷积器通过Verilog硬件描述语言(HDL)设计实现,由Vivado 2 022.2在XCZU7EG板卡上进行仿真和分析。实验结果表明,相比同类方法,该文所提可配置2-D卷积器,乘法资源利用率得到显著提升,由20%~50%提升至89%,并以514个逻辑单元实现1 500 MB/s的吞吐率,具有广泛的适用性。

基于离散2-D小波多级分解的电容器外观缺陷视觉检测方法

电容器外观破损、凸起等缺陷直接影响器件的生产质量。目前电容器微小外观缺陷检测难度较大,导致视觉检测效率较低。为此提出了基于离散2-D小波多层分解的电容器外观缺陷视觉检测方法。采用同态滤波处理去除光照对电容器外观视觉检测结果的影响。利用像素点灰度值确定图像边缘点位置,提取电容器外观缺陷区域。应用离散2-D小波分解的方法对其展开多级分解。再差分统计电容器图像的外观缺陷纹理特征。将特征输入Mahalanobis分类器中,完成电容器外观缺陷视觉检测。仿真结果表明,所提方法可以较好检测电容的各种缺陷,召回率最低值是94.9%,误检率最高值为9.8%,漏检率均在10%以内,电容器缺陷检测效果较好。

2,4-D处理对欧李果实钙摄取的影响及与有机酸代谢和IAA的关系

为探究外源植物生长调节剂2,4-D处理对欧李(Cerasus humilis)果实发育成熟过程中钙素摄取能力的影响及与有机酸代谢、生长素(IAA)之间的关系,以内蒙古地区的低钙欧李MY-9果实为试材,以清水喷施作为对照,研究2,4-D处理对果实发育成熟过程中钙摄取能力和有机酸代谢及IAA的影响,并进行相关性分析。结果表明(:1)在摄钙速率方面,处理与对照果实的果胶钙、活性钙、总钙的摄钙速率变化规律相似,均表现为先升后降,处理后从硬核期到完熟期以上3种钙的摄取速率均显著高于对照;而水溶钙摄钙速率与其相反,表现为先降后升,果实发育后期显著高于对照。在摄钙活性方面,4种钙形态的变化规律相似,均表现为持续下降,处理后果实的摄钙活性均显著高于对照。在相对生长钙摄取量方面,4种钙形态的变化规律一致,均表现为先升后降,硬熟期和完熟期处理显著高于对照。(2)处理与对照果实中苹果酸脱氢酶(NAD-MDH)活性、苹果酸及有机酸含量随着果实发育成熟均呈上升趋势,苹果酸酶(NADP-ME)活性和柠檬酸含量均呈下降趋势,2,4-D处理可以不同程度提高果实中有机酸含量及相关酶活性。(3)处理与对照果实的IAA含量整体上均表现为先升后降,整个发育时期处理与对照均存在显著差异,2,4-D处理可显著提升欧李果实IAA含量。(4)相关性分析表明,水溶钙的摄钙速率和相对生长钙摄取量与NAD-MDH活性、苹果酸及有机酸含量均呈显著正相关,与IAA含量、NADP-ME活性及柠檬酸含量呈显著负相关;果胶钙、活性钙及总钙的摄钙活性与IAA含量、NADP-ME活性、柠檬酸含量呈显著正相关,与NAD-MDH活性、苹果酸及有机酸呈显著负相关;2,4-D处理提升了果实钙摄取能力与柠檬酸含量的相关性。综上所述,2,4-D处理可以提高欧李果实中钙摄取能力,提高有机酸代谢及IAA含量;欧李果实中钙摄取能力与有机酸代谢及IAA含量密切相关,随着NAD-MDH活性增强,苹果酸含量增加,有机酸含量增加,会提高水溶钙摄取能力,但会降低果胶钙、活性钙及总钙的摄取能力;而柠檬酸及IAA含量的增加会降低水溶钙摄取能力,提高果胶钙、活性钙及总钙摄取能力。2,4-D处理通过提高有机酸代谢及IAA含量调控果实钙摄取。

Effects of preparation parameters on growth and properties of β-Ga_(2)O_(3) film

The Ga_(2)O_(3) films are deposited on the Si and quartz substrates by magnetron sputtering, and annealing. The effects of preparation parameters(such as argon–oxygen flow ratio, sputtering power, sputtering time and annealing temperature)on the growth and properties(e.g., surface morphology, crystal structure, optical and electrical properties of the films) are studied by x-ray diffractometer(XRD), scanning electron microscope(SEM), and ultraviolet-visible spectrophotometer(UV-Vis). The results show that the thickness, crystallization quality and surface roughness of the β-Ga_(2)O_(3) film are influenced by those parameters. All β-Ga_(2)O_(3) films show good optical properties. Moreover, the value of bandgap increases with the enlarge of the percentage of oxygen increasing, and decreases with the increase of sputtering power and annealing temperature, indicating that the bandgap is related to the quality of the film and affected by the number of oxygen vacancy defects. The I–V curves show that the Ohmic behavior between metal and β-Ga_(2)O_(3) films is obtained at 900℃. Those results will be helpful for the further research of β-Ga_(2)O_(3) photoelectric semiconductor.

基于二萘并[2,3-B∶2′,3′-D]呋喃基团的高效窄发射蓝光OLED器件

高效率窄光谱蓝色有机电致发光器件(OLED)是柔性显示领域的研究重点之一。本文以二萘并[2,3-B∶2′,3′-D]呋喃为弱电子受体、N-(4-联苯基)-1-萘胺作为电子给体设计合成了一种D-A-D型蓝光分子DPF-NA,其在正己烷溶液中的发射峰位于441 nm。理论计算与光物理测试结果显示DPF-NA具有杂化局域电荷转移激发态(HLCT)特性,兼具局域态(LE)高发光效率与电荷转移态(CT)高激子利用率特征,在二氯甲烷溶液中的光致发光量子效率(PLQY)为81.2%。基于质量分数3%DPF-NA掺杂浓度的OLED器件电致发光(EL)峰位于455 nm,半峰宽(FWHM)仅为26 nm,CIE(x,y)坐标为(0.14,0.08),最大外量子效率(EQEmax)为6.76%。

非小细胞肺癌患者组织MutS同种组织蛋白2、O6-甲基鸟嘌呤-DNA甲基转移酶表达分析

目的探讨非小细胞肺癌(NSCLC)患者癌组织MutS同种组织蛋白2(MSH2)、O6-甲基鸟嘌呤-DNA甲基转移酶(MGMT)表达情况及与临床病理参数、预后的关系。方法2021年7月至2022年7月我院收治的96例NSCLC患者,取其手术切除的NSCLC组织标本(NSCLC组)及距癌边缘3 cm处的癌旁正常组织(对照组)。检测两组MSH2和MGMT的表达水平,分析MSH2和MGMT表达水平与患者临床病理参数及预后的关系。结果与对照组比较,NSCLC组MSH2和MGMT阳性率更低(P<0.05);MSH2阳性与患者分化程度有关(P<0.05);MGMT阳性与患者吸烟史和分化程度有关(P<0.05);与MSH2和MGMT阴性患者比较,阳性患者1年生存率均更高(P<0.05)。结论MSH2和MGMT均在NSCLC组织中存在较低表达,其表达水平与临床病理参数、预后密切相关。

New 4-imino-4H-Chromeno[2,3-d]Pyrimidin-3(5H)-Amine: Synthesis, Cytotoxic Effects on Tumoral Cell Lines and in Silico ADMET Properties

The synthesis of new 4-imino-4H-chromeno[2,3-d]pyrimidin-3(5H)-amine in four steps including one step under microwave dielectric heating is reported. The structural identity of the synthesized compounds was established according to their spectroscopic analysis, such as FT-IR, NMR and mass spectroscopy. These new compounds were tested for their antiproliferative activities on seven representative human tumoral cell lines (Huh7 D12, Caco2, MDA-MB231, MDA-MB468, HCT116, PC3 and MCF7) and also on fibroblasts. Among them, only the compounds 6c showed micromolar cytotoxic activity on tumor cell lines (1.8 50 50 > 25 μM). Finally, in silico ADMET studies ware performed to investigate the possibility of using of the identified compound 6c as potential anti-tumor compound.

2-D Modeling and Calculations of Stratospheric Ozone and Influences of Convection, Diffusion, and Time

An engineering system approach of 2-D cylindrical model of transient mass balance calculations of ozone and other concerned chemicals along with fourteen photolysis, ozone-generating and ozone-depleting chemical reaction equations was developed, validated, and used for studying the ozone concentrations, distribution and peak of the layer, ozone depletion and total ozone abundance in the stratosphere. The calculated ozone concentrations and profile at both the Equator and a 60˚N location were found to follow closely with the measured data. The calculated average ozone concentration was within 1% of the measured average, and the deviation of ozone profiles was within 14%. The monthly evolution of stratospheric ozone concentrations and distribution above the Equator was studied with results discussed in details. The influences of slow air movement in both altitudinal and radial directions on ozone concentrations and profile in the stratosphere were explored and discussed. Parametric studies of the influences of gas diffusivities of ozone DO3 and active atomic oxygen DO on ozone concentrations and distributions were also studied and delineated. Having both influences through physical diffusion and chemical reactions, the diffusivity (and diffusion) of atomic oxygen DO was found to be more sensitive and important than that of ozone DO3 on ozone concentrations and distribution. The 2-D ozone model present in this paper for stratospheric ozone and its layer and depletion is shown to be robust, convenient, efficient, and executable for analyzing the complex ozone phenomena in the stratosphere. .

Investigation of influence factors on CO_(2) flowback characteristics and optimization of flowback parameters during CO_(2) dry fracturing in tight gas reservoirs

CO_(2) dry fracturing is a promising alternative method to water fracturing in tight gas reservoirs,especially in water-scarce areas such as the Loess Plateau.The CO_(2) flowback efficiency is a critical factor that affects the final gas production effect.However,there have been few studies focusing on the flowback characteristics after CO_(2) dry fracturing.In this study,an extensive core-to-field scale study was conducted to investigate CO_(2) flowback characteristics and CH_(4) production behavior.Firstly,to investigate the impact of core properties and production conditions on CO_(2) flowback,a series of laboratory experiments at the core scale were conducted.Then,the key factors affecting the flowback were analyzed using the grey correlation method based on field data.Finally,taking the construction parameters of Well S60 as an example,a dual-permeability model was used to characterize the different seepage fields in the matrix and fracture for tight gas reservoirs.The production parameters after CO_(2) dry fracturing were then optimized.Experimental results demonstrate that CO_(2) dry fracturing is more effective than slickwater fracturing,with a 9.2%increase in CH_(4) recovery.The increase in core permeability plays a positive role in improving CH_(4) production and CO_(2) flowback.The soaking process is mainly affected by CO_(2) diffusion,and the soaking time should be controlled within 12 h.Increasing the flowback pressure gradient results in a significant increase in both CH_(4) recovery and CO_(2) flowback efficiency.While,an increase in CO_(2) injection is not conducive to CH_(4) production and CO_(2) flowback.Based on the experimental and field data,the important factors affecting flowback and production were comprehensively and effectively discussed.The results show that permeability is the most important factor,followed by porosity and effective thickness.Considering flowback efficiency and the influence of proppant reflux,the injection volume should be the minimum volume that meets the requirements for generating fractures.The soaking time should be short which is 1 day in this study,and the optimal bottom hole flowback pressure should be set at 10 MPa.This study aims to improve the understanding of CO_(2) dry fracturing in tight gas reservoirs and provide valuable insights for optimizing the process parameters.

Recent advances in titanium carbide MXene-based nanotextures with influential effect of synthesis parameters for solar CO_(2)reduction and H_(2)production:A critical review

Photocatalytic solar to energy conversion is considered an attractive approach for overcoming energy crises and environmental concerns.Recently,titanium carbide(Ti_(3)C_(2))MXenes have been recognized as promising cocatalysts based on their metallic conductivity,excessive active reaction sites,and enlarged surface area.The current review focuses on the properties and applications of Ti_(3)C_(2)MXenes useful in the field of photocatalysis.More specifically,surface modification of Ti_(3)C_(2)MXenes by varying synthesis parameters to get pure materials and also composites with the role of functional groups towards solar energy conversion applications is highlighted in this review.The effect of etching and oxidizing pathways to get an efficient cocatalyst has been discussed in detail.Considering the significant effect of parameters,optimum synthesis conditions such as etchant type,concentration,time and type of intercalant in both the Ti_(3)C_(2)synthesis approaches for improved photoactivity are discussed.Additionally,the surface modification of Ti_(3)C_(2)through oxidation for TiO2growth on its surface is deliberated with a detailed discussion on etchant type,concentration,etching time,and environmental factors.The optimum oxidation condition,including temperature,time,and environment for thermal treatment of Ti_(3)C_(2),were also included.Lastly,the review summarizes the conclusion and future perspectives for solar energy conversion applications.

Fault plane parameters of Tancheng M81/2 earthquake on the basis of present-day seismological data

The great Tancheng earthquake of M81/2 occurred in 1668 was the largest seismic event ever recorded in history in eastern China. This study determines the fault geometry of this earthquake by inverting seismological data of present-day moderate-small earthquakes in the focal area. We relocated those earthquakes with the double-difference method and found focal mechanism solutions using gird test method. The inversion results are as follows： the strike is 21.6°, the dip angle is 89.5°, the slip angle is 170°, the fault length is about 160 km, the lower-boundary depth is about 32 km and the buried depth of upper boundary is about 4 km. This shows that the seismic fault is a NNE-trending upright right-lateral strike-slip fault and has cut through the crust. Moreover, the surface seismic fault, intensity distribution of the earthquake, earthquake-depth distribution and seismic-wave velocity profile in the focal area all verified our study result.

2-D algebraic test for robust stability of time-delay systems with interval parameters

The robust stability test of time-delay systems with interval parameters can be concluded into the robust stability of the interval quasipolynomials. It has been revealed that the robust stability of the quasipolynomials depends on that of their edge polynomials. This paper transforms the interval quasipolynomials into two-dimensional （2-D） interval polynomials （2-D s-z hybrid polynomials）, proves that the robust stability of interval 2-D polynomials are sufficient for the stability of given quasipolynomials. Thus, the stability test of interval quasipolynomials can be completed in 2-D s-z domain instead of classical 1-D s domain. The 2-D s-z hybrid polynomials should have different forms under the time delay properties of given quasipolynomials. The stability test proposed by the paper constructs an edge test set from Kharitonov vertex polynomials to reduce the number of testing edge polynomials. The 2-D algebraic tests are provided for the stability test of vertex 2-D polynomials and edge 2-D polynomials family. To verify the results of the paper to be correct and valid, the simulations based on proposed results and comparison with other presented results are given.

Robust stability test for 2-D continuous-discrete systems with interval parameters

It is revealed that the dynamic stability of 2-D recursive continuous-discrete systems with interval parameters involves the problem of robust Hurwitz-Schur stability of bivariate polynomials family. It is proved that the Hurwitz-Schur stability of the denominator polynomials of the systems is necessary and sufficient for the asymptotic stability of the 2-D hybrid systems. The 2-D hybrid transformation, i. e. 2-D Laplace-Z transformation, has been proposed to solve the stability analysis of the 2-D continuous-discrete systems, to get the 2-D hybrid transfer functions of the systems. The edge test for the Hurwitz-Schur stability of interval bivariate polynomials is introduced. The Hurwitz-Schur stability of the interval family of 2-D polynomials can be guaranteed by the stability of its finite edge polynomials of the family. An algorithm about the stability test of edge polynomials is given.

Zero-field splitting parameters and local structures for tetragonal Cr^(2+) centers in Cr^(2+)-doped ZnSe semiconductors

The inter-relation between zero-field splitting （ZFS） parameters and local lattice structures of the （CrSe4）6 clusters in ZnSe semiconductors has been established by using the complete diagonalization （of the energy matrix） method. On the basis of this, the local lattice distortions, the ZFS parameters D, a, F and the optical spectrum for Cr2＋ ions doped into ZnSe are theoretically investigated, and the contributions of the spin singlets have been taken into account. The calculated ZFS parameters are in good agreement with the experimental values. From our calculations, the tetragonal distortion parameters AR = 0.091A and Aθ = 4.28° of Cr2＋ in ZnSe are acquired, and the results suggest that there exists a tetragonal expansion distortion for the local lattice structure of （CrSe4）6- clusters in ZnSe crystals. The influence of the spin singlets on ZFS parameters is also discussed, indicating that the contributions to ZFS parameters a and F cannot be ignored.

Sentinel-2遥感影像在盘锦水稻米质监测中的应用研究

本研究基于水稻孕穗期、抽穗期、灌浆期和成熟期4个生育期的Sentinel-2遥感数据,分析各生育期内卫星遥感光谱参数与稻米品质指标的关系,建立基于各生育期卫星光谱信息的水稻品质指标预测模型。将5种稻米品质指标分别与4个生育期内的光谱参数进行皮尔逊相关性分析,结果表明,5项品质指标在4个生育期内均与光谱参数有不同程度相关性。然后筛选出相关性效果显著的光谱参数,用于建立各品质指标的预测方程,建模结果表明,基于卫星遥感光谱信息解释率由大到小的稻米品质指标依次是精米率>长宽比>蛋白质含量>直链淀粉含量>糙米率;卫星遥感光谱反演稻米各品质指标所在的最佳生育期不同,糙米率和精米率的最佳生育期为抽穗期,其建模决定系数(Coefficient of Determination,R^(2))分别为0.461和0.893;长宽比的最佳生育期为成熟期,R^(2)为0.878;直链淀粉含量和蛋白质含量的最佳生育期为灌浆期,R^(2)分别为0.646和0.647;基于卫星遥感光谱信息的稻米品质模型验证效果较好,解释率为51%~74%。可见,利用卫星遥感技术能够实现大范围水稻品质指标定量监测与评估。

2型糖尿病老年病人心肌纤维化T1-Mapping与左心室应变参数的相关性分析

目的探究2型糖尿病(T2DM)老年病人心肌纤维化T1-Mapping参数与左心室应变参数之间的相关性。方法以2019年8月至2022年8月在孝感市中心医院就诊的T2DM病人82例为研究对象,根据病人的病程分为短期T2DM组40例(病程<5年)和长期T2DM组42例(病程≥5年),以同期招募的健康志愿者40例为对照组。比较各组间左心室应变参数及T1-Mapping参数。采用多元线性逐步回归法分析T1-Mapping参数的影响因素。采用相关性分析T1-Mapping参数与左心室应变参数的相关性。结果短期T2DM组病人左室周向峰值舒张应变率(PDSR)[1.25(0.95,1.50)1/s比1.40(1.20,1.70)1/s]较对照组降低(P<0.05),细胞外体积(ECV)[31.00(29.00,33.50)%比29.00(27.00,32.00)%]较对照组升高(P<0.05)。与对照组比较,长期T2DM组病人左室纵向峰值应变(PS)[−14.50(−12.38,−16.50)%比−16.15(−14.60,−18.30)%]、径向PDSR[(−2.58±0.83)1/s比(−3.32±0.88)1/s]、周向PDSR[0.90(0.70,1.20)1/s比1.40(1.20,1.70)1/s]、纵向PDSR[0.70(0.58,0.90)1/s比1.10(0.80,1.38)1/s]降低(P<0.05),ECV[34.00(32.00,35.00)%比29.00(27.00,32.00)%]升高(P<0.05)。与短期T2DM组比较,长期T2DM组病人左室纵向PS[−14.50(−12.38,−16.50)%比−16.15(−14.45,−18.38)%]、径向PDSR[(−2.58±0.83)1/s比(−3.61±0.76)1/s]、周向PDSR[0.90(0.70,1.20)1/s比1.25(0.95,1.50)1/s]、纵向PDSR[0.70(0.58,0.90)1/s比1.10(0.80,1.30)1/s]降低(P<0.05),ECV[34.00(32.00,35.00)%比31.00(29.00,33.50)%]升高(P<0.05)。多元线性回归分析结果示,糖尿病病程是T2DM病人ECV的独立影响因素(β=0.29,P<0.05)。Spearman相关性分析结果示,T2DM病人ECV与左室纵向PS(r_(s)=0.35,P<0.05)、纵向峰值收缩应变率(PSSR)(r_(s)=0.31,P<0.05)呈显著正相关,与左室周向PDSR(r_(s)=−0.29,P<0.05)、纵向PDSR(r_(s)=−0.43,P<0.05)呈显著负相关。结论心脏磁共振T1-Mapping可能发现T2DM病人早期心肌纤维化,T1-Mapping参数与左心室应变参数显著相关。

高速S-CO_(2)向心透平几何参数优化及变工况特性分析

透平是热力循环中实现热功转换的核心设备,优化透平几何参数以改善气动性能,是提升系统热效率的关键。该文以面向某船舶主机烟气余热利用的超临界二氧化碳布雷顿循环透平设计参数为基础,给出向心透平主要几何参数,采用耦合CO_(2)真实物性参数的CFX仿真方法,分析几何参数动、静叶包角以及叶轮出口几何角对透平性能的影响规律并进行参数优化,进一步研究非设计工况下的透平运行特性。结果表明:增大静叶包角会使动叶前缘出现扰动涡流并减少余速损失,增大叶轮出口几何角,动叶包角对透平效率的影响规律不变,但效率峰值点会沿动叶包角减小的方向移动;动、静叶包角和叶轮出口几何角分别为49°、21.5°、25°时透平设计点总-静等熵效率高达87.99%,相比优化前,提高0.54个百分点;透平偏离设计点±20%工况下等熵效率大于80%。结果可为超临界二氧化碳高速向心透平设计提供一定参考。

基于m×2正则化交叉验证的神经网络超参数调优方法

超参数调优是神经网络建模的关键问题。针对传统的超参数调优方法存在的问题,该文提出了一种基于m×2正则化交叉验证的超参数调优方法。目的是给出一种适用于复杂模型、大数据集背景下的计算开销较小且稳健的超参数调优方法。该方法的思想是从完整的数据集上选取少部分数据进行调优,避免模型在数据集较大时非常耗时的超参数调优难题;在m×2交叉验证的基础上设置正则化条件均衡训练集与验证集之间的分布差异,从而减少分布不一致带来的性能波动;使用信噪比作为调优的优化目标,从而可以综合考虑模型性能评价指标的均值和方差;并采用正交设计选择相关性较低的超参数组合以提高调优效率。以命名实体任务为例进行实验,在CoNLL 2003数据集上的实验结果显示,提出的调优方法能够选到和网格搜索性能上没有显著差异的超参数组合,且调优时间可显著降低约66%。

38 mm型CO_(2)致裂器内部参数对致裂器做功能力影响

为快速获得液态CO_(2)致裂器内部参数对致裂器做功能力的影响特征,优化提高液态CO_(2)致裂器做功能力,提高煤层瓦斯抽采效率,设计液态CO_(2)致裂器做功能力快速评估试验装置。使用煤矿用38 mm型致裂器进行4水平3因素的9组正交试验,分析液态CO_(2)致裂器发热管内部装药量、主管内液态CO_(2)填充量、泄能片厚度以及泄能头释放口径对于致裂器做功能力的影响主次顺序;进一步对其中最重要的影响因素进行固定变量试验,分析最重要影响因素对液态CO_(2)致裂器做功能力的影响特征。结果表明:对于煤矿用38 mm型CO_(2)致裂器,泄能片厚度对于液态CO_(2)致裂器做功能力的影响最大,发热管内部装药量次之,主管内液态CO_(2)填充量及泄能头释放口径影响最弱;液态CO_(2)致裂器做功能力随着泄能片的厚度增加而增加,但当泄能片厚度增加到一定程度时,液态CO_(2)致裂器做功能力增幅不够明显,达到一定厚度泄能片不会破裂,当38 mm型致裂器内部参数设置为CO_(2)质量0.33 kg、释放口径18 mm、装药量60 g、泄能片厚度2.0 mm时致裂器做功能力对应三硝基甲苯(TNT)当量为0.202 kg,相对当前工地使用参数做功能力提升21.9%。