This paper presents an optimized 3-D Discrete Wavelet Transform (3-DDWT) architecture. 1-DDWT employed for the design of 3-DDWT architecture uses reduced lifting scheme approach. Further the architecture is optimized ...This paper presents an optimized 3-D Discrete Wavelet Transform (3-DDWT) architecture. 1-DDWT employed for the design of 3-DDWT architecture uses reduced lifting scheme approach. Further the architecture is optimized by applying block enabling technique, scaling, and rounding of the filter coefficients. The proposed architecture uses biorthogonal (9/7) wavelet filter. The architecture is modeled using Verilog HDL, simulated using ModelSim, synthesized using Xilinx ISE and finally implemented on Virtex-5 FPGA. The proposed 3-DDWT architecture has slice register utilization of 5%, operating frequency of 396 MHz and a power consumption of 0.45 W.展开更多
Sea ice surface roughness(SIR)affects the energy transfer between the atmosphere and the ocean,and it is also an important indicator for sea ice characteristics.To obtain a small-scale SIR with high spatial resolution...Sea ice surface roughness(SIR)affects the energy transfer between the atmosphere and the ocean,and it is also an important indicator for sea ice characteristics.To obtain a small-scale SIR with high spatial resolution,a novel method is proposed to retrieve SIR from Sentinel-1 synthetic aperture radar(SAR)images,utilizing an ensemble learning method.Firstly,the two-dimensional continuous wavelet transform is applied to obtain the spatial information of sea ice,including the scale and direction of ice patterns.Secondly,a model is developed using the Adaboost Regression model to establish a relationship among SIR,radar backscatter and the spatial information of sea ice.The proposed method is validated by using the SIR retrieved from SAR images and comparing it to the measurements obtained by the Airborne Topographic Mapper(ATM)in the summer Beaufort Sea.The determination of coefficient,mean absolute error,root-mean-square error and mean absolute percentage error of the testing data are 0.91,1.71 cm,2.82 cm,and 36.37%,respectively,which are reasonable.Moreover,K-fold cross-validation and learning curves are analyzed,which also demonstrate the method’s applicability in retrieving SIR from SAR images.展开更多
Among existing remote sensing applications, land-based X-band radar is an effective technique to monitor the wave fields, and spatial wave information could be obtained from the radar images. Two-dimensional Fourier T...Among existing remote sensing applications, land-based X-band radar is an effective technique to monitor the wave fields, and spatial wave information could be obtained from the radar images. Two-dimensional Fourier Transform （2-D FT） is the common algorithm to derive the spectra of radar images. However, the wave field in the nearshore area is highly non-homogeneous due to wave refraction, shoaling, and other coastal mechanisms. When applied in nearshore radar images, 2-D FT would lead to ambiguity of wave characteristics in wave number domain. In this article, we introduce two-dimensional Wavelet Transform （2-D WT） to capture the non-homogeneity of wave fields from nearshore radar images. The results show that wave number spectra by 2-D WT at six parallel space locations in the given image clearly present the shoaling of nearshore waves. Wave number of the peak wave energy is increasing along the inshore direction, and dominant direction of the spectra changes from South South West （SSW） to West South West （WSW）. To verify the results of 2-D WT, wave shoaling in radar images is calculated based on dispersion relation. The theoretical calculation results agree with the results of 2-D WT on the whole. The encouraging performance of 2-D WT indicates its strong capability of revealing the non-homogeneity of wave fields in nearshore X-band radar images.展开更多
This study presents a novel two-step approach to assess plate-like structural laminar damages,particularly for delamination damage detection of composite structures.Firstly,a 2-D continuous wavelet transform is employ...This study presents a novel two-step approach to assess plate-like structural laminar damages,particularly for delamination damage detection of composite structures.Firstly,a 2-D continuous wavelet transform is employed to identify the damage location and sizes from vibration curvature data.An inverse method is subsequently then used to determine the bending stiffness reduction ratio along a specified direction,enabling the quantification of the delamination severity.The method employed in this study is an extension of the one-dimensional inverse method developed in a previous work of the authors.The applicability of the two-step inverse approach is demonstrated in a simulation analysis and by an experimental study on a cantilever composite plate containing a single delamination.The inverse method is shown to have the capacity to reveal the detailed damage information of delamination within a constrained searching space and can be used to determine the effective flexural stiffness of composite plate structures,even in cases of complex delamination damage.展开更多
Implementation of efficient vibration control schemes for seismically excited structures is becoming more and more important in recent years.In this study,the influence of different control schemes on the dynamic perf...Implementation of efficient vibration control schemes for seismically excited structures is becoming more and more important in recent years.In this study,the influence of different control schemes on the dynamic performance of a frame structure excited by El Centro wave,with an emphasis on reaching law based control strategies,is examined.Reaching law refers to the reachable problem and criteria for the sliding state of a control system.Three reaching laws are designed to present different sliding mode control strategies by incorporating a state space model that describes structural dynamic characteristics of a frame structure.Both intact and damaged structures are studied by using the aforementioned control strategies.The influence of different structural damage extents,control locations and reaching law based control methods are further investigated.The results show that the structure can be well controlled using the sliding mode strategy when the induced structural damage extent does not exceed the standard percentage for considering the structure was damaged,which is 20%reduction in structure stiffness,as reported in the literature.The control effectiveness is more satisfactory if the control location is the same as the direction of external excitation.Furthermore,to study the chattering phenomenon of the sliding mode control method,approximation and detail components extracted from the phase plots of the sliding mode control system are compared via wavelet transform at different scales.The results show that for the same type of control law,the system behaves with similar chattering phenomenon.展开更多
文摘This paper presents an optimized 3-D Discrete Wavelet Transform (3-DDWT) architecture. 1-DDWT employed for the design of 3-DDWT architecture uses reduced lifting scheme approach. Further the architecture is optimized by applying block enabling technique, scaling, and rounding of the filter coefficients. The proposed architecture uses biorthogonal (9/7) wavelet filter. The architecture is modeled using Verilog HDL, simulated using ModelSim, synthesized using Xilinx ISE and finally implemented on Virtex-5 FPGA. The proposed 3-DDWT architecture has slice register utilization of 5%, operating frequency of 396 MHz and a power consumption of 0.45 W.
基金The National Key Research and Development Program of China under contract No.2021YFC2803301the National Natural Science Foundation of China under contract No.41977302+2 种基金the National Natural Science Youth Foundation of China under contract No.41506199the Natural Science Youth Foundation of Jiangsu Province under contrant No.BK20150905the Science and Technology Project of China Huaneng Group Co.,Ltd.under contract No.HNKJ20-H66.
文摘Sea ice surface roughness(SIR)affects the energy transfer between the atmosphere and the ocean,and it is also an important indicator for sea ice characteristics.To obtain a small-scale SIR with high spatial resolution,a novel method is proposed to retrieve SIR from Sentinel-1 synthetic aperture radar(SAR)images,utilizing an ensemble learning method.Firstly,the two-dimensional continuous wavelet transform is applied to obtain the spatial information of sea ice,including the scale and direction of ice patterns.Secondly,a model is developed using the Adaboost Regression model to establish a relationship among SIR,radar backscatter and the spatial information of sea ice.The proposed method is validated by using the SIR retrieved from SAR images and comparing it to the measurements obtained by the Airborne Topographic Mapper(ATM)in the summer Beaufort Sea.The determination of coefficient,mean absolute error,root-mean-square error and mean absolute percentage error of the testing data are 0.91,1.71 cm,2.82 cm,and 36.37%,respectively,which are reasonable.Moreover,K-fold cross-validation and learning curves are analyzed,which also demonstrate the method’s applicability in retrieving SIR from SAR images.
基金Project supported by the Open Research Fund of State Key Laboratory of Hydrology-Water Resources and Hydraulic Engineering, Hohai University (Grant No. 2008491011)the Special Fund of State Key Laboratory of Hydrology-Water Resources and Hydraulic Engineering, Hohai University (Grant Nos. 2009585812, 2009586712)+1 种基金the Key Project of Chinese Ministry of Education (Grant No. 20100094120008)supported by the Funds for the Central Universities, Hohai University (Grant No. 2009B00214)
文摘Among existing remote sensing applications, land-based X-band radar is an effective technique to monitor the wave fields, and spatial wave information could be obtained from the radar images. Two-dimensional Fourier Transform （2-D FT） is the common algorithm to derive the spectra of radar images. However, the wave field in the nearshore area is highly non-homogeneous due to wave refraction, shoaling, and other coastal mechanisms. When applied in nearshore radar images, 2-D FT would lead to ambiguity of wave characteristics in wave number domain. In this article, we introduce two-dimensional Wavelet Transform （2-D WT） to capture the non-homogeneity of wave fields from nearshore radar images. The results show that wave number spectra by 2-D WT at six parallel space locations in the given image clearly present the shoaling of nearshore waves. Wave number of the peak wave energy is increasing along the inshore direction, and dominant direction of the spectra changes from South South West （SSW） to West South West （WSW）. To verify the results of 2-D WT, wave shoaling in radar images is calculated based on dispersion relation. The theoretical calculation results agree with the results of 2-D WT on the whole. The encouraging performance of 2-D WT indicates its strong capability of revealing the non-homogeneity of wave fields in nearshore X-band radar images.
文摘This study presents a novel two-step approach to assess plate-like structural laminar damages,particularly for delamination damage detection of composite structures.Firstly,a 2-D continuous wavelet transform is employed to identify the damage location and sizes from vibration curvature data.An inverse method is subsequently then used to determine the bending stiffness reduction ratio along a specified direction,enabling the quantification of the delamination severity.The method employed in this study is an extension of the one-dimensional inverse method developed in a previous work of the authors.The applicability of the two-step inverse approach is demonstrated in a simulation analysis and by an experimental study on a cantilever composite plate containing a single delamination.The inverse method is shown to have the capacity to reveal the detailed damage information of delamination within a constrained searching space and can be used to determine the effective flexural stiffness of composite plate structures,even in cases of complex delamination damage.
文摘Implementation of efficient vibration control schemes for seismically excited structures is becoming more and more important in recent years.In this study,the influence of different control schemes on the dynamic performance of a frame structure excited by El Centro wave,with an emphasis on reaching law based control strategies,is examined.Reaching law refers to the reachable problem and criteria for the sliding state of a control system.Three reaching laws are designed to present different sliding mode control strategies by incorporating a state space model that describes structural dynamic characteristics of a frame structure.Both intact and damaged structures are studied by using the aforementioned control strategies.The influence of different structural damage extents,control locations and reaching law based control methods are further investigated.The results show that the structure can be well controlled using the sliding mode strategy when the induced structural damage extent does not exceed the standard percentage for considering the structure was damaged,which is 20%reduction in structure stiffness,as reported in the literature.The control effectiveness is more satisfactory if the control location is the same as the direction of external excitation.Furthermore,to study the chattering phenomenon of the sliding mode control method,approximation and detail components extracted from the phase plots of the sliding mode control system are compared via wavelet transform at different scales.The results show that for the same type of control law,the system behaves with similar chattering phenomenon.
