Boosting oxygen reduction activity and CO_(2) resistance on bismuth ferrite-based perovskite cathode for low-temperature solid oxide fuel cells below 600℃

Developing efficient and stable cathodes for low-temperature solid oxide fuel cells(LT-SOFCs) is of great importance for the practical commercialization.Herein,we propose a series of Sm-modified Bi_(0.7-x)Sm_xSr_(0.3)FeO_(3-δ) perovskites as highly-active catalysts for LT-SOFCs.Sm doping can significantly enhance the electrocata lytic activity and chemical stability of cathode.At 600℃,Bi_(0.675)Sm_(0.025)Sr_(0.3)FeO_(3-δ)(BSSF25) cathode has been found to be the optimum composition with a polarization resistance of 0.098 Ω cm^2,which is only around 22.8% of Bi_(0.7)Sr_(0.3)FeO_(3-δ)(BSF).A full cell utilizing BSSF25 displays an exceptional output density of 790 mW cm^(-2),which can operate continuously over100 h without obvious degradation.The remarkable electrochemical performance observed can be attributed to the improved O_(2) transport kinetics,superior surface oxygen adsorption capacity,as well as O_(2)p band centers in close proximity to the Fermi level.Moreover,larger average bonding energy(ABE) and the presence of highly acidic Bi,Sm,and Fe ions restrict the adsorption of CO_(2) on the cathode surface,resulting in excellent CO_(2) resistivity.This work provides valuable guidance for systematic design of efficient and durable catalysts for LT-SOFCs.

Preferentially selective extraction of lithium from spent LiCoO_(2)cathodes by medium-temperature carbon reduction roasting

Lithium recovery from spent lithium-ion batteries(LIBs)have attracted extensive attention due to the skyrocketing price of lithium.The medium-temperature carbon reduction roasting was proposed to preferential selective extraction of lithium from spent Li-CoO_(2)(LCO)cathodes to overcome the incomplete recovery and loss of lithium during the recycling process.The LCO layered structure was destroyed and lithium was completely converted into water-soluble Li2CO_(3)under a suitable temperature to control the reduced state of the cobalt oxide.The Co metal agglomerates generated during medium-temperature carbon reduction roasting were broken by wet grinding and ultrasonic crushing to release the entrained lithium.The results showed that 99.10%of the whole lithium could be recovered as Li2CO_(3)with a purity of 99.55%.This work provided a new perspective on the preferentially selective extraction of lithium from spent lithium batteries.

Enhancing performance of low-temperature processed CsPbI2Br all-inorganic perovskite solar cells using polyethylene oxide-modified TiO_(2)

CsPbX_(3)-based(X=I,Br,Cl)inorganic perovskite solar cells(PSCs)prepared by low-temperature process have attracted much attention because of their low cost and excellent thermal stability.However,the high trap state density and serious charge recombination between low-temperature processed TiO_(2)film and inorganic perovskite layer interface seriously restrict the performance of all-inorganic PSCs.Here a thin polyethylene oxide(PEO)layer is employed to modify TiO_(2)film to passivate traps and promote carrier collection.The impacts of PEO layer on microstructure and photoelectric characteristics of TiO_(2)film and related devices are systematically studied.Characterization results suggest that PEO modification can reduce the surface roughness of TiO_(2)film,decrease its average surface potential,and passivate trap states.At optimal conditions,the champion efficiency of CsPbI_(2)Br PSCs with PEO-modified TiO_(2)(PEO-PSCs)has been improved to 11.24%from 9.03%of reference PSCs.Moreover,the hysteresis behavior and charge recombination have been suppressed in PEO-PSCs.

Recent advances in intermediate-temperature CO_(2) capture: Materials,technologies and applications

Carbon capture,utilization and storage(CCUS) is widely recognized as a vital strategy for mitigating the impact of human induced climate change.Among various CO_(2) adsorbents,intermediate-temperature solid adsorbents have garnered significant attention due to their potential applications in hydrogen utilization,specifically in the water gas shift,steam reforming and gasification processes.These processes are crucial for achieving carbon neutrality.While laboratory-level studies have showcased the high adsorption capacity of these materials via various synthesis and modification methods,their practical application in complex industrial environments remains challenging,impeding the commercialization process.This review aims to critically summarize the recent research progress made in intermediatetemperature(200-400℃) solid CO_(2) adsorbents,particularly focusing on indicators such as cyclability,gas selectivity,and formability,which play vital roles in industrial application scenarios.Additionally,we provide an overview of laboratory-level advanced technologies specifically tailored for industrial applications.Furthermore,we highlight several industrial-ready advanced technologies that can pave the way for overcoming the challenges associated with large-scale implementation.The insights provided by this review aim to assist researchers in identifying the most relevant research directions for industrial applications.By promoting advances in the application of solid adsorbents,we strive to facilitate the ultimate goal of achieving carbon neutrality.

Ca and Sr co-doping induced oxygen vacancies in 3DOM La_(2-x)Sr_(x)Ce_(2-y)CayO_(7-δ)catalysts for boosting low-temperature oxidative coupling of methane

It is urgent to develop catalysts with application potential for oxidative coupling of methane(OCM)at relatively lower temperature.Herein,three-dimensional ordered macro porous(3 DOM)La_(2-x)Sr_(x)Ce_(2-y)CayO_(7-δ)(A_(2)B_(2)O_(7)-type)catalysts with disordered defective cubic fluorite phased structure were successfully prepared by a colloidal crystal template method.3DOM structure promotes the accessibility of the gaseous reactants(O2and CH4)to the active sites.The co-doping of Ca and Sr ions in La_(2-x)Sr_(x)Ce_(2-y)CayO_(7-δ)catalysts improved the formation of oxygen vacancies,thereby leading to increased density of surface-active oxygen species(O_(2)^(-))for the activation of CH4and the formation of C2products(C2H6and C2H4).3DOM La_(2-x)Sr_(x)Ce_(2-y)CayO_(7-δ)catalysts exhibit high catalytic activity for OCM at low temperature.3DOM La1.7Sr0.3Ce1.7Ca0.3O7-δcatalyst with the highest density of O_(2)^(-)species exhibited the highest catalytic activity for low-temperature OCM,i.e.,its CH4conversion,selectivity and yield of C2products at 650℃are 32.2%,66.1%and 21.3%,respectively.The mechanism was proposed that the increase in surface oxygen vacancies induced by the co-doping of Ca and Sr ions boosts the key step of C-H bond breaking and C-C bond coupling in catalyzing low-temperature OCM.It is meaningful for the development of the low-temperature and high-efficient catalysts for OCM reaction in practical application.

New insight into the design of highly dispersed Pt supported CeO_(2)-TiO_(2) catalysts with superior activity for VOCs low-temperature removal

A series of CeO_(2)-TiO_(2)mixed oxides supports with various Ce/Ti molar ratio were synthesized by modified coprecipitation method. The corresponding Pt loaded(0.5 wt% Pt) catalysts were prepared by electronless deposition method and evaluated for the deep oxidation of n-hexane as a model VOCs. The results show that the CeO_(2)and TiOxnanoparticles can highly disperse into each other and form Ce_(2)Ti_(2)O_(7)solid solution with appropriate Ce/Ti molar ratio, which significantly improves their redox ability by enhancing the interaction between CeO_(2)and TiO_(x). The dispersibility of Pt species can also be adjusted by altering the Ce/Ti molar ratio, and Pt/CeTi-2/1 catalyst with Ce/Ti molar ratio of 2:1 exhibits the best Pt dispersibility that Pt species mainly exist as Pt single atoms. The high dispersion of Pt species in the Pt/CeO_(2)-TiO_(2)catalysts would promote the catalytic activity of VOCs oxidation with low T90% values(1000 ppm, GHSV = 15,000 h^(-1)), such as for n-hexane degradation with T90% of 139℃. The characterizations reveal that the superior activity is mainly related to possessing the more Pt2+species,adsorbed oxygen species and higher low-temperature reducibility owing to the strong interaction between highly dispersed Pt species and CeO_(2)-TiO_(2)as well as the promoted migration of lattice oxygen by the formation of more Ce_(2)Ti_(2)O_(7)species. Furthermore, the Pt/CeTi-2/1 catalyst also exhibits excellent stability for chlorinated and other non-chlorinated VOCs oxidation, making it very promising for real application under various operating conditions.

Improving mechanical properties and high-temperature oxidation of press hardened steel by adding Cr and Si

This work investigated the effect of Cr and Si on the mechanical properties and oxidation resistance of press hardened steel.Results indicated that the microstructure of the Cr-Si micro-alloyed press hardened steel consisted of lath martensite,M_(23)C_(6)carbides,and retained austenite.The retained austenite and carbides are responsible for the increase in elongation of the micro-alloyed steel.In addition,after oxidation at 930℃for 5 min,the thickness of the oxide scales on the Cr-Si micro-alloyed press hardened steel is less than 5μm,much thinner than 45.50μm-thick oxide scales on 22MnB5.The oxide scales of the Cr-Si micro-alloyed steel are composed of Fe_(2)O_(3),Fe_(3)O_(4),mixed spinel oxide(FeCr_(2)O_(4)and Fe_(2)SiO_(4)),and amorphous SiO_(2).Adding Cr and Si significantly reduces the thickness of the oxide scales and prevents the generation of the FeO phase.Due to the increase of spinel FeCr_(2)O_(4)and Fe_(2)SiO_(4)phase in the inner oxide scale and the amorphous SiO_(2)close to the substrate,the oxidation resistance of the Cr-Si micro-alloyed press hardened steel is improved.

Effect of nano TiO_(2) and SiO_(2) on gelation performance of HPAM/PEI gels for high-temperature reservoir conformance improvement

Nanoparticles have been widely used in polymer gel systems in recent years to improve gelation performance under high-temperature reservoir conditions. However, different types of nanoparticles have different effects on their gelation performance, which has been little researched. In this study, the high-temperature gelation performance, chemical structure, and microstructure of polymer gels prepared from two nanomaterials (i.e., nano-SiO_(2) and nano-TiO_(2)) were measured. The conventional HPAM/PEI polymer gel system was employed as the control sample. Results showed that the addition of nano-TiO_(2) could significantly enhance the gel strength of HPAM/PEI gel at 80 ℃. The gel strength of the enhanced HPAM/PEI gel with 0.1 wt% nano-TiO_(2) could reach grade I. The system also had excellent high-temperature stability at 150 ℃. The enhanced HPAM/PEI gel with 0.02 wt% nano-TiO_(2) reached the maximum gel strength at 150 ℃ with a storage modulus (G′) of 15 Pa, which can meet the need for efficient plugging. However, the nano-SiO_(2) enhanced HPAM/PEI polymer gel system showed weaker gel strength than that with nano-TiO_(2) at both 80 and 150 ℃ with G′ lower than 5 Pa. Microstructures showed that the nano-TiO_(2) enhanced HPAM/PEI gel had denser three-dimensional (3D) mesh structures, which makes the nano-TiO_(2) enhanced HPAM/PEI gel more firmly bound to water. The FT-IR results also confirmed that the chemical structure of the nano-TiO_(2) enhanced HPAM/PEI gel was more thermally stable than nano-SiO_(2) since there was a large amount of –OH groups on the structure surface. Therefore, nano-TiO_(2) was more suitable as the reinforcing material for HPAM/PEI gels for high-temperature petroleum reservoir conformance improvement.

Exsolved materials for CO_(2)reduction in high-temperature electrolysis cells

Electrochemical reduction of CO_(2)into valuable fuels and chemicals has become a contemporary research area,where the heterogeneous catalyst plays a critical role.Metal nanoparticles supported on oxides performing as active sites of electrochemical reactions have been the focus of intensive investigation.Here,we review the CO_(2)reduction with active materials prepared by exsolution.The fundamental of exsolution was summarized in terms of mechanism and models,materials,and driven forces.The advances in the exsolved materials used in hightemperature CO_(2)electrolysis were catalogued into tailored interfaces,synergistic effects on alloy particles,phase transition,reversibility and electrochemical switching.

Comparative investigation of microstructure and high-temperature oxidation resistance of high-velocity oxy-fuel sprayed CoNiCrAlY/nano-Al_(2)O_(3) composite coatings using satellited powders

Satellited CoNiCrAlY–Al_(2)O_(3)feedstocks with 2wt%, 4wt%, and 6wt% oxide nanoparticles and pure CoNiCrAlY powder were deposited by the high-velocity oxy fuel process on an Inconel738 superalloy substrate. The oxidation test was performed at 1050℃ for 5, 50, 100,150, 200, and 400 h. The microstructure and phase composition of powders and coatings were characterized by scanning electron microscopy and X-ray diffraction, respectively. The bonding strength of the coatings was also evaluated. The results proved that with the increase in the percentage of nanoparticles(from 2wt% to 6wt%), the amount of porosity(from 1vol% to 4.7vol%), unmelted particles, and roughness of the coatings(from 4.8 to 8.8 μm) increased, and the bonding strength decreased from 71 to 48 MPa. The thicknesses of the thermally grown oxide layer of pure and composite coatings(2wt%, 4wt%, and 6wt%) after 400 h oxidation were measured as 6.5, 5.5, 7.6, and 8.1 μm, respectively.The CoNiCrAlY–2wt% Al_(2)O_(3)coating showed the highest oxidation resistance due to the diffusion barrier effect of well-dispersed nanoparticles. The CoNiCrAlY–6wt% Al_(2)O_(3)coating had the lowest oxidation resistance due to its rough surface morphology and porous microstructure.

High-temperature stress suppresses allene oxide cyclase 2 and causes male sterility in cotton by disrupting jasmonic acid signaling

Cotton(Gossypium spp.) yield is reduced by stress. In this study, high temperature(HT) suppressed the expression of the jasmonic acid(JA) biosynthesis gene allene oxide cyclase 2(GhAOC2), reducing JA content and causing male sterility in the cotton HT-sensitive line H05. Anther sterility was reversed by exogenous application of methyl jasmonate(MeJA) to early buds. To elucidate the role of GhAOC2 in JA biosynthesis and identify its putative contribution to the anther response to HT, we created gene knockout cotton plants using the CRISPR/Cas9 system. Ghaoc2 mutant lines showed male-sterile flowers with reduced JA content in the anthers at the tetrad stage(TS), tapetum degradation stage(TDS), and anther dehiscence stage(ADS). Exogenous application of MeJA to early mutant buds(containing TS or TDS anthers) rescued the sterile pollen and indehiscent anther phenotypes, while ROS signals were reduced in ADS anthers. We propose that HT downregulates the expression of GhAOC2 in anthers, reducing JA biosynthesis and causing excessive ROS accumulation in anthers, leading to male sterility. These findings suggest exogenous JA application as a strategy for increasing male fertility in cotton under HT.

A new transition metal diphosphideα-MoP_(2) synthesized by a high-temperature and high-pressure technique

Monoclinicα-MoP_(2),with the OsGe2-type structure(space group C2/m,Z=4)and lattice parameters a=8.7248(11)Å,b=3.2322(4)Å,c=7.4724(9)Å,andβ=119.263°,was synthesized under a pressure of 4~GPa at a temperature between 1100℃and 1200℃.The structure ofα-MoP_(2) and its relationship to other transition metal diphosphides are discussed.Surprisingly,the ambient pressure phase orthorhombicβ-MoP_(2)(space group Cmc21)is denser in structure thanα-MoP_(2).Room-temperature high-pressure x-ray diffraction studies exclude the possibility of phase transition fromβ-MoP_(2) to α-MoP_(2),suggesting thatα-MoP_(2) is a stable phase at ambient conditions;this is also supported by the total energy and phonon calculations.

Effect of Different Loadings on the Performance of Ni2P/Al2O3 Catalysts for Low-Temperature Thioethering and Selective Hydrogenation of Diolefins in Liquefied Petroleum Gas

In this study,different loadings of x%Ni_(2)P/γ-Al_(2)O_(3)(x=6%,9%,12%,15%,18%)catalysts with aluminum oxide(Al_(2)O_(3))as the carrier,nickel chloride(NiCl2)as the nickel(Ni)source,and ammonium hypophosphite(NH_(4)H_(2)PO_(2))as the phosphorus(P)source were prepared by the equal volume impregnation method to investigate the effects of different loadings on the performance of the selective hydrogenation of diolefins and thiol etherification in LPG.The physicochemical properties of the catalysts were characterized by XRD,BET,SEM,TEM,H_(2)-TPR,and XPS,and the catalytic activity of the catalysts was evaluated in a fixed-bed microreactor.The results showed that a change in the loading affected the catalyst crystalline phase structure and size,specific surface area,P coverage,active phase dispersion,and catalytic activity.At 6%,9%,and 12%loadings the catalysts had an Ni phase but there was no obvious Ni_(2)P phase in the nickel phosphide;at 15%loading a single Ni_(2)P phase was obtained,and at 18%loading both Ni_(2)P and Ni1_(2)P_(5) phases appeared.There was a P enrichment on the catalyst surface,and the higher the loading the more P species were enriched on the surface,but some of the P was lost during the catalyst reduction process due to the production of phosphine(PH3)gas.The 15%Ni_(2)P/γ-Al_(2)O_(3) catalyst had the largest Ni/Al ratio and the best dispersion.The Ni_(2)P active phase size was small at about 4.25 nm and Ni_(2)P was uniformly dispersed on the catalyst surface without agglomeration.The 15%Ni_(2)P/γ-Al_(2)O_(3) catalyst had the best catalytic activity at a pressure of 2.0 MPa,a liquid hourly space velocity(LHSV)of 3.0 h-1,and a hydrogen to hydrocarbon ratio of 12.The 1,3-butadiene conversion was 97.45%and the methanethiol removal was 100%at a temperature of 140℃.

Unraveling the relationship between Sr stoichiometry in Sr_(x)Fe_(1.5)Mo_(0.5)O_(6)-σ and its catalytic performance for high-temperature CO_(2) electrolysis

The solid oxide electrolytic cell(SOEC)is one of the most promising energy conversion and storage devices,which could convert CO_(2) to CO with high Faradaic efficiency and production rate.However,the lack of active and stable cathode materials impedes their practical applications.Here we focus on the promising perovskite oxide cathode material Sr_(2)Fe_(1.5)Mo_(0.5)O_(6)-σ,with the aim of understanding how A-atom stoichiometry and catalytic performance are linked.We find that increasing the strontium content in the perovskite improves the chemisorption of CO_(2) on its surface,forming a SrCO_(3) phase.This hinders the charge transfer and oxygen exchange processes.Simulta-neously,strontoium segregation to the cathode surface facilitates coking of the surface during CO_(2) electrolysis,which poisons the electrode.Consequently,a small number of Sr deficiencies are optimal for both electrochemical performance and long-term stability.Our results provide new insights for designing high-performance CO_(2) electrolysis cathode materials.

Negative thermal expansion and phase transition of low-temperature Mg_(2)NiH_(4)

The negative thermal expansion(NTE) phenomenon is of great significance in fabricating zero thermal expansion(ZTE) materials to avoid thermal shock during heating and cooling. NTE is observed in limited groups of materials, e.g., metal cyanides, oxometallates, and metalorganic frameworks, but has not been reported in the family of metal hydrides. Herein, a colossal and continuous negative thermal expansion is firstly developed in the low-temperature phases of LT1-and LT2-Mg_(2)NiH_(4) between 488 K and 733 K from in-situ transmission electron microscope(TEM) video, with the volume contraction reaching 18.7% and 11.3%, respectively. The mechanisms for volume contraction of LT1 and LT2 phases are elucidated from the viewpoints of phase transformation, magnetic transition, and dehydrogenation, which is different from common NTE materials containing flexible polyhedra units in the structure. The linear volume shrinkage of LT2 in the temperature of 488-553 K corresponds to the phase transition of LT2→HT with a thermal expansion coefficient of -799.7 × 10^(-6) K^(-1) revealed by in-situ synchrotron powder X-ray diffraction. The sudden volume contraction in LT1 between 488 and 493 K may be caused by the rapid dehydrogenation of LT1 to Mg_(2)Ni. The revealed phenomenon in single composite material with different structures would be significant for preparing zero thermal expansion materials by tuning the fraction of LT1 and LT2 phases.

2型糖尿病合并肥胖患者血清肌联素水平与胰岛素抵抗的相关性

目的 观察2型糖尿病(T2DM)合并肥胖患者血清肌联素(myonectin)水平的变化,探讨血清myonectin水平的影响因素及其与胰岛素抵抗的相关性。方法 选择2020年11月至2022年6月在河北北方学院附属第一医院内分泌科住院的186例T2DM患者,根据体重指数(BMI)分为糖尿病正常体重组(60例)、糖尿病超重组(65例)和糖尿病肥胖组(61例)。另选取同期于医院体检且BMI正常的健康者作为正常对照组(60例)。测定各组血清myonectin、空腹血糖(FPG)、空腹胰岛素(FINS)、糖化血红蛋白(HbA1c)、总胆固醇(TC)、甘油三酯(TG)、高密度脂蛋白胆固醇(HDL-C)、低密度脂蛋白胆固醇(LDL-C)水平,计算BMI及稳态胰岛素抵抗指数(HOMA-IR)。比较各组血清myonectin水平,并分析血清myonectin水平与胰岛素抵抗的相关性。结果 与正常对照组比较,糖尿病正常体重组、糖尿病超重组和糖尿病肥胖组的血清myonectin水平降低,差异有统计学意义(P<0.05)。与糖尿病正常体重组比较,糖尿病超重组和糖尿病肥胖组的myonectin水平降低,差异有统计学意义(P<0.05)。与糖尿病超重组比较,糖尿病肥胖组的myonectin水平降低,差异有统计学意义(P<0.05)。多元逐步回归分析表明,影响T2DM患者BMI的主要因素为myonectin、HOMA-IR、LDL-C、HDL-C、HbA1c。影响HOMA-IR的主要因素为myonectin、BMI、HbA1c、HDL-C。结论 血清myonectin水平在T2DM合并肥胖患者中显著降低,myonectin与胰岛素抵抗密切相关,与糖脂代谢共同参与了肥胖及糖尿病的发生、发展。

WNK2通过抑制ERK1/2/ROS/SHP2信号通路延缓肝细胞癌的增殖和侵袭

目的探讨WNK2对肝细胞癌(hepatocellocellua carcinoma,HCC)中ERK1/2/ROS/SHP2信号通路的影响,并探讨其在HCC细胞增殖和迁移中的作用。方法将WNK2-mimic和sh-RNA WNK2以及相应的阴性对照转染HepG2细胞,采用BALB/c裸鼠皮下成瘤实验检测WNK2对肝细胞癌增殖能力的影响;采用Western Blot检测瘤组织中WNK2、p40、gp90、p-SHP2、p-AKT和p-ERK1/2的表达;使用SHP2抑制剂PHPS1进行处理之后,采用Western Blot检测HepG2细胞中WNK2、p40、gp90、p-SHP2、p-AKT和p-ERK1/2的表达;使用细胞划痕实验和Transwell检测HepG2细胞的迁移能力和侵袭能力;采用单克隆增殖实验和CCK-8检测HepG2细胞的增殖能力。结果与sh-NC组相比,sh-RNA WNK2组裸鼠的瘤体体积显著增大(P<0.01);而与NC-mimic组相比,WNK2-mimic组裸鼠的瘤体体积显著减小(P<0.01);Western Blot结果显示,与sh-NC组相比,sh-RNA WNK2组WNK2的表达显著降低(P<0.01),p40、gp90、p-SHP2、p-AKT和p-ERK1/2的表达显著升高(P<0.01);而与NC-mimic组相比,WNK2-mimic组WNK2的表达显著升高(P<0.01),p40、gp90、p-SHP2、p-AKT和p-ERK1/2的表达显著降低(P<0.01);在体外实验当中,相对于sh-NC组,sh-RNA WNK2组中WNK2的表达显著降低(P<0.01),p40、gp90、p-SHP2、p-AKT和p-ERK1/2的表达显著升高(P<0.01);相对于sh-NC+PHPS1组,sh-RNA WNK2+PHPS1组中WNK2的表达显著降低(P<0.01),而p40、gp90、p-SHP2、p-AKT和p-ERK1/2的表达则被逆转并且与sh-NC+PHPS1组不具有显著性差异(P>0.05);细胞划痕实验和Transwell结果显示,相对于sh-NC组,sh-RNA WNK2组HepG2细胞的迁移和侵袭能力显著升高(P<0.01);sh-NC+PHPS1组和sh-RNA WNK2+PHPS1组HepG2细胞的迁移和侵袭能力显著降低并且不具有显著性差异(P>0.05);单克隆增殖实验结果显示,相对于sh-NC组,sh-RNA WNK2组HepG2细胞的增殖能力显著升高(P<0.01),而sh-NC+PHPS1组和sh-RNA WNK2+PHPS1组HepG2细胞的增殖能力显著降低并且不具有显著性差异(P>0.05)。结论WNK2可以抑制ERK1/2/ROS/SHP2信号通路,从而抑制ERK1/2/AKT信号通路,延缓HCC的增殖和迁移。

钠-葡萄糖协同转运蛋白2抑制剂对急性心肌梗死合并2型糖尿病患者临床指标及预后的影响

目的观察钠-葡萄糖协同转运蛋白2抑制剂(SGLT-2i)对急性心肌梗死(AMI)合并2型糖尿病(T2DM)患者临床指标及预后的影响。方法回顾性选取2020年1月至2022年6月于安徽医科大学第二附属医院胸痛中心就诊后确诊AMI合并T2DM患者180例,根据入院后降糖方案分为对照组(79例,给予磺脲类、α-糖苷酶抑制剂、二甲双胍等药物)和观察组(101例,给予达格列净或恩格列净)。患者出院后定期随访,比较2组患者临床指标及主要不良心血管事件(MACE)发生情况。结果所有患者随访6~12个月,结果显示观察组白细胞计数小于对照组[(7.4±1.6)×10^(9)/L比(8.7±1.6)×10^(9)/L],左心室舒张末期内径改善优于对照组[(-0.527±1.462)mm比(1.359±2.111)mm](均P<0.05)。观察组MACE发生率低于对照组[5.4%(2/37)比25.0%(8/32)],差异有统计学意义(P=0.020)。结论SGLT-2i较其他降糖药物12个月内能改善AMI合并T2DM患者的心脏功能及预后,且能减轻该类患者的全身炎症反应。

基于热障涂层的La_(2)Zr_(2)O_(7)材料改性研究进展

随着航空发动机不断向高推重比、高性能方向发展,传统、单一的热障涂层(Thermal barrier coating,TBC)已经不能满足热端部件严苛的服役要求。锆酸镧(La_(2)Zr_(2)O_(7))具有熔点高、高温下结构稳定、低热导率等优点,具有极好的隔热性能,有望成为新一代热障涂层候选材料,但在实际应用中仍存在两大关键问题,即热膨胀系数低和断裂韧性差。因此,La_(2)Zr_(2)O_(7)材料在服役过程中会因热失配而造成局部热应力集中,导致涂层过早剥落失效,严重影响涂层的服役寿命。国内外研究表明,对La_(2)Zr_(2)O_(7)材料进行改性可以有效解决上述问题。为此,系统分析了关于La_(2)Zr_(2)O_(7)材料改性的研究工作,将La_(2)Zr_(2)O_(7)材料改性总结为4类:第二相复合、稀土掺杂、纳米化和高熵化。重点介绍了4种不同改性方式对La_(2)Zr_(2)O_(7)材料热导率、热膨胀系数的影响及增韧机理,并对La_(2)Zr_(2)O_(7)材料改性研究工作进行总结和展望,以为La_(2)Zr_(2)O_(7)材料在热障涂层领域的应用提供理论支撑。

姜酮通过激活Nrf2/HO-1信号通路减轻OGD/R后氧化应激损伤对HT22细胞凋亡的抑制作用

目的:探讨姜酮对氧糖剥夺/复糖复氧(OGD/R)后小鼠海马神经元HT22细胞的保护作用,阐明其相关作用机制。方法:培养HT22细胞,设置不同OGD/R时间梯度,建立OGD/R细胞损伤模型。HT22细胞分为对照组、OGD/R组、OGD/R+1μmol·L^(-1)姜酮组、OGD/R+10μmol·L^(-1)姜酮、OGD/R+100μmol·L^(-1)姜酮组和OGD/R+0.2%二甲亚枫(DMSO)组,CCK-8法检测各组细胞活性并计算各组细胞存活率,确定姜酮最适药物浓度。细胞分为对照组、OGD/R组、OGD/R+姜酮组和OGD/R+姜酮+核因子E2相关因子2(Nrf2)抑制剂(ML385)组,OGD/R+姜酮组细胞经姜酮给药处理4 h后予以OGD 8 h和复糖复氧8 h处理,OGD/R+姜酮+ML385组细胞在姜酮给药前予以10μmol·L^(-1)ML385预处理6 h,CCK-8法检测各组细胞活性,Western blotting法检测各组细胞中Nrf2、血红素加氧酶1(HO-1)、B细胞淋巴瘤2(Bcl-2)和Bcl-2相关X蛋白(Bax)蛋白表达水平,酶联免疫吸附试验(ELISA)法检测各组细胞培养上清中超氧化物歧化酶(SOD)活性和丙二醛(MDA)水平。结果:与对照组比较,HT22细胞经OGD 8 h和复糖复糖8 h处理后细胞存活率低于50%,以OGD 8 h和复糖复糖8 h建立HT22细胞OGD/R模型。与OGD/R组比较,OGD/R+不同剂量姜酮组细胞存活率均不同程度升高,其中OGD/R+100μmol·L^(-1)姜酮组细胞存活率升高最明显(P<0.01),故选用100μmol·L^(-1)姜酮用于后续实验。与对照组比较,OGD/R组细胞活性明显降低(P<0.01),细胞中Nrf2、HO-1和Bax蛋白表达水平明显升高(P<0.01),Bcl-2蛋白表达水平明显降低(P<0.05),细胞培养上清中SOD活性明显降低(P<0.01),MDA水平明显升高(P<0.01);与OGD/R组比较,OGD/R+姜酮组细胞活性明显升高(P<0.01),细胞中Nrf2、HO-1和Bcl-2蛋白表达水平明显升高(P<0.05或P<0.01),Bax蛋白表达水平明显降低(P<0.05),细胞培养上清中SOD活性明显升高(P<0.01),MDA水平明显降低(P<0.01);与OGD/R+姜酮组比较,OGD/R+姜酮+ML385组细胞活性明显降低(P<0.01),细胞中Nrf2、HO-1和Bcl-2蛋白表达水平明显降低(P<0.01),Bax蛋白表达水平明显升高(P<0.01),细胞培养上清中SOD活性明显降低(P<0.01),MDA水平明显升高(P<0.05)。结论:姜酮可通过激活Nrf2/HO-1信号通路减轻OGD/R后氧化应激损伤对HT22细胞凋亡的抑制作用。