Scrap vulcanized rubber is amongst a bigger waste polymers. It does not decompose easily owing to its cross linked structure. Modification of scrap tires powder by the grafting with 2-acrylamido-2-methylpropanesulfoni...Scrap vulcanized rubber is amongst a bigger waste polymers. It does not decompose easily owing to its cross linked structure. Modification of scrap tires powder by the grafting with 2-acrylamido-2-methylpropanesulfonic acid (AMPS) is described. The grafting is achieved through free radical initiation. The effects of different amount of monomer and initiator were examined. Also the influence of reaction time and temperature were investigated. The grafted waste rubber was characterized by FT/IR, SEM and DSC measurements. The proposed mechanism of the grafting reaction is discussed. From DSC and SEM studies of WR-g-AMPS compared with PAMPS and WR, the results show that the particle size and crystallinity were enhanced for the grafted copolymers. The obtained modified scraped tires will used as an ion exchanger for the future applications.展开更多
A novel adsorbent （AMPS-silica） was synthesized by bounding AMPS （2-acrylamido-2-methylpropanesulfonic acid） onto silica surface, which functioned with γ-methacryloxypropyltrimethoxysilane reagent. The adsorbent ...A novel adsorbent （AMPS-silica） was synthesized by bounding AMPS （2-acrylamido-2-methylpropanesulfonic acid） onto silica surface, which functioned with γ-methacryloxypropyltrimethoxysilane reagent. The adsorbent was characterized by nitrogen adsorption/desorption measurement, thermogravimetric analysis （TGA） and potentiometric titration analysis. The TGA result indicated that the surface modification reactions introduced some organic functional groups onto the surface of silica. The surface area of AMPSsilica was 389.7 m2/g. The adsorbent was examined for copper ion removal in series of batch adsorption experiments. Results showed that the adsorption of Cu2＋ onto AMPS-silica was pH dependent, and the adsorption capacity increased with increasing pH from 2 to 6. The adsorption kinetics showed that Cu^2＋ adsorption was fast and the data fitted well with a pseudo secondorder kinetic model. The adsorption of Cu^2＋ onto AMPS-silica obeyed both Freundlich and Langmuir isotherms, with r^2 = 0.993 and r^2 = 0.984, respectively. The maximum Cu^2＋ adsorption capacity was 19.9 mg/g. The involved mechanism might be the adsorption through metal binding with organic functional groups such as carboxyl, amino and sulfonic groups. Cu^2＋ loaded on AMPS-silica could be desorbed in HNO3 solution, and the adsorption properties remain stable after three adsorption-desorption cycles.展开更多
Hydrogel is considered as an important material in our world nowadays as it is used in many important and significant applications such as in tissue engineering and agriculture. There are hundreds of types of such mat...Hydrogel is considered as an important material in our world nowadays as it is used in many important and significant applications such as in tissue engineering and agriculture. There are hundreds of types of such materials, where most of them can be easily prepared. The main objective of this work is to prepare one of the hydrogel types which could be very useful in the agriculture of deserts where plants in dry places require water in order to grow up. There are many places around the world where raining occurs only once or twice a year. There are also places where it does not rain at all. Therefore, hydrogels are required in order to absorb water in large quantities either during raining or irrigation instead of escaping to underground and then eject them to the roots of plants over time as the plants require watering. In this research a hydrogel based on acryl amide, Poly 2-Acrylamide-2-Methyl-1-Propane Sulphonic Acid, (PAMPS) was prepared by using different percentages of a suitable cross-linking agent, Methylene-bis-Acrylamide. The cross-linker content is very important factor affects the rate and amount of absorbed water. The highest amount of absorbed water at 25°C was observed by using 0.6% cross-linking agent based on monomer mass. The temperature of absorbed water and its pH value are also essential factors that affect the rate and the amount of absorbed water and were investigated in this work. The highest amount of absorbed water was recorded at pH = 12 and at 60°C. The amount and the rate of water absorbed by Sodium Polyacrylate Hydrogel were also investigated at 25°C. The agriculture applications of hydrogel based on Sodium Polyacrylate were examined using Fenugreek seeds implanting.展开更多
文摘Scrap vulcanized rubber is amongst a bigger waste polymers. It does not decompose easily owing to its cross linked structure. Modification of scrap tires powder by the grafting with 2-acrylamido-2-methylpropanesulfonic acid (AMPS) is described. The grafting is achieved through free radical initiation. The effects of different amount of monomer and initiator were examined. Also the influence of reaction time and temperature were investigated. The grafted waste rubber was characterized by FT/IR, SEM and DSC measurements. The proposed mechanism of the grafting reaction is discussed. From DSC and SEM studies of WR-g-AMPS compared with PAMPS and WR, the results show that the particle size and crystallinity were enhanced for the grafted copolymers. The obtained modified scraped tires will used as an ion exchanger for the future applications.
基金supported by the Fundation for Creative Research Groups of China (No. 50621804)
文摘A novel adsorbent （AMPS-silica） was synthesized by bounding AMPS （2-acrylamido-2-methylpropanesulfonic acid） onto silica surface, which functioned with γ-methacryloxypropyltrimethoxysilane reagent. The adsorbent was characterized by nitrogen adsorption/desorption measurement, thermogravimetric analysis （TGA） and potentiometric titration analysis. The TGA result indicated that the surface modification reactions introduced some organic functional groups onto the surface of silica. The surface area of AMPSsilica was 389.7 m2/g. The adsorbent was examined for copper ion removal in series of batch adsorption experiments. Results showed that the adsorption of Cu2＋ onto AMPS-silica was pH dependent, and the adsorption capacity increased with increasing pH from 2 to 6. The adsorption kinetics showed that Cu^2＋ adsorption was fast and the data fitted well with a pseudo secondorder kinetic model. The adsorption of Cu^2＋ onto AMPS-silica obeyed both Freundlich and Langmuir isotherms, with r^2 = 0.993 and r^2 = 0.984, respectively. The maximum Cu^2＋ adsorption capacity was 19.9 mg/g. The involved mechanism might be the adsorption through metal binding with organic functional groups such as carboxyl, amino and sulfonic groups. Cu^2＋ loaded on AMPS-silica could be desorbed in HNO3 solution, and the adsorption properties remain stable after three adsorption-desorption cycles.
文摘Hydrogel is considered as an important material in our world nowadays as it is used in many important and significant applications such as in tissue engineering and agriculture. There are hundreds of types of such materials, where most of them can be easily prepared. The main objective of this work is to prepare one of the hydrogel types which could be very useful in the agriculture of deserts where plants in dry places require water in order to grow up. There are many places around the world where raining occurs only once or twice a year. There are also places where it does not rain at all. Therefore, hydrogels are required in order to absorb water in large quantities either during raining or irrigation instead of escaping to underground and then eject them to the roots of plants over time as the plants require watering. In this research a hydrogel based on acryl amide, Poly 2-Acrylamide-2-Methyl-1-Propane Sulphonic Acid, (PAMPS) was prepared by using different percentages of a suitable cross-linking agent, Methylene-bis-Acrylamide. The cross-linker content is very important factor affects the rate and amount of absorbed water. The highest amount of absorbed water at 25°C was observed by using 0.6% cross-linking agent based on monomer mass. The temperature of absorbed water and its pH value are also essential factors that affect the rate and the amount of absorbed water and were investigated in this work. The highest amount of absorbed water was recorded at pH = 12 and at 60°C. The amount and the rate of water absorbed by Sodium Polyacrylate Hydrogel were also investigated at 25°C. The agriculture applications of hydrogel based on Sodium Polyacrylate were examined using Fenugreek seeds implanting.
