The total synthesis of 3,7 dimethyl 2 tridecanyl acetate,the active component of the sex pheromone of diprion pini,was investigated in this paper.The two key synthins blocks,2 methyl octan 1 yl lithium and 3,4 ...The total synthesis of 3,7 dimethyl 2 tridecanyl acetate,the active component of the sex pheromone of diprion pini,was investigated in this paper.The two key synthins blocks,2 methyl octan 1 yl lithium and 3,4 dimethyl γ butyrolactone,were obtained from diethyl malonate and 2,3 epoxybutane.2 Methyl octan 1 yl lithium reacted with 3,4 dimethyl γ butyrolactone to yield the ketoalcohol and then followed by Huang Minlong reduction to afford 3,7 dimethyl 2 tridecanol,acylated with acetic anhydide to give 3,7 dimethyl 2 tridecanyl acetate.展开更多
A series of indium oxide‐modified Cu/SiO2catalysts were synthesized and used to produce ethanol via methyl acetate hydrogenation.In‐Cu/SiO2catalyst containing1.0wt%In2O3exhibited the best catalytic activity and stab...A series of indium oxide‐modified Cu/SiO2catalysts were synthesized and used to produce ethanol via methyl acetate hydrogenation.In‐Cu/SiO2catalyst containing1.0wt%In2O3exhibited the best catalytic activity and stability.The physicochemical properties of the synthesized catalysts were investigated using several characterization methods and the results showed that introducing suitable indium to Cu/SiO2increased the copper dispersion,diminished the copper crystallite size,and enriched the surface Cu+concentration.Furthermore,the Cu/SiO2catalyst gradually deactivated during the stability test,which was mainly attributed to copper sintering and the valence change in surface copper species.In contrast,indium addition can inhibit the thermal transmigration and accumulation of copper nanoparticles to stabilize the catalyst.?2018,Dalian Institute of Chemical Physics,Chinese Academy of Sciences.Published by Elsevier B.V.All rights reserved.展开更多
The CaCl2 solubility in 2-methyl-butanol acetate and the vapor pressure of 2-methyl-butanol acetate containing CaCl2 were measured in the range of 90-135°C and from very low salt concentration to saturation.The e...The CaCl2 solubility in 2-methyl-butanol acetate and the vapor pressure of 2-methyl-butanol acetate containing CaCl2 were measured in the range of 90-135°C and from very low salt concentration to saturation.The experimental data were correlated with two equations,a modified Antoine equation with the dissolved salt taken into account and a nonrandom two liquid-electrolyte（e-NRTL）model.Both models are in good agreement with the experimental data.This study provides essential physical data for further investigation of vapor-liquid equilibrium system containing salt.展开更多
A novel copper（Ⅱ） complex with tert-butyl 2-[N-（tert-butyloxycarbonylmethyl）-2-picolyamino]acetate（ampy） was synthesized and structurally characterized by elemental analysis, FT-IR spectrum, electrospray ioniza...A novel copper（Ⅱ） complex with tert-butyl 2-[N-（tert-butyloxycarbonylmethyl）-2-picolyamino]acetate（ampy） was synthesized and structurally characterized by elemental analysis, FT-IR spectrum, electrospray ionization-mass spectrometry, UV-vis spectrum and single-crystal X-ray diffraction, respectively. A mononuclear copper（II） complex with ampy, [Cu（ampy）Cl2]（1）, was formed irrespective of the metal-to-ligand molar ratios（[Cu2＋]：[ampy] = 0.5：1, 1：1, and 2：1） as a single product. Complex 1 crystallizes in the orthorhombic system, space group Pbca with a = 12.343（2）, b = 18.928（3）, c = 20.058（4） A, V = 4686.1（14） A3, Z = 8, Dc = 1.3349（4） g/cm3, F（000） = 1920, S = 1.016, R = 0.0693 and w R = 0.1721 for 3151 observed reflections with I 〉 2σ（I）. X-ray diffraction analysis reveals that the central copper（II） ion is bound by pyridyl N, tertiary amine N and carbonyl O atoms of the quadridentate ampy as well as two Cl anions, constructing a slightly distorted octahedral geometry. Complex 1 further constructs a stable 3D supramolecular architecture by intermolecular C–H…Cl hydrogen bonds. In addition, the molecular geometry was calculated by density functional theory（DFT/B3LYP） method with the basis sets（6-31＋G（d,p） for H, C, N, O and Cl atoms, and LANL2 DZ for Cu atom, respectively）. The calculated results show that the optimized geometrical parameters are in good agreement with the experimental data. Natural bond orbital（NBO） analysis and frontier molecular orbitals（FMOs） analysis were investigated at the same level.展开更多
Product selectivity and reaction pathway are highly dependent on surface structure of heterogeneous catalysts.For vapor-phase hydrogenation of dimethyl oxalate(DMO),"EG route"(DMO→methyl glycolate(MG)ethyle...Product selectivity and reaction pathway are highly dependent on surface structure of heterogeneous catalysts.For vapor-phase hydrogenation of dimethyl oxalate(DMO),"EG route"(DMO→methyl glycolate(MG)ethylene glycol(EG)→ethanol(ET))and"MA route"(DMO→MG→methyl acetate(MA))were proposed over traditional Cu based catalysts and Mo-based or Fe-based catalysts,respectively.Herein,tunable yield of ET(93.7%)and MA(72.1%)were obtained through different reaction routes over WO_(x) modified Cu/SiO_(2) catalysts,and the corresponding reaction route was further proved by kinetic study and in-situ DRIFTS technology.Mechanistic studies demonstrated that H_(2) activation ability,acid density and Cu-WO_(x) interaction on the catalysts were tuned by regulating the surface W density,which resulted in the different reaction pathway and product selectivity.What's more,high yield of MA produced from DMO hydrogenation was firstly reported with the H_(2) pressure as low as 0.5 MPa.展开更多
The title compound was synthesized by the base catalyzed reaction of 5-（（quinolin- 8-yloxy）methyl）-1,3,4-oxadiazole-2（3H）-thione with methyl chloroacetate. The structure was supported by the spectroscopic data a...The title compound was synthesized by the base catalyzed reaction of 5-（（quinolin- 8-yloxy）methyl）-1,3,4-oxadiazole-2（3H）-thione with methyl chloroacetate. The structure was supported by the spectroscopic data and unambiguously confirmed by single-crystal X-ray diffraction studies. It crystallizes from a methanol solution in the triclinic space group Pi with unit cell dimensions a = 7.4509（9）, b = 10.2389（12）, c = 12.2299（15）A, a = 74.771（2）, β = 77.956（2）, 7 = 69.263（2）°, V = 834.98（17） A3 and Z = 2. In order to gain some valuable insights into the molecular structure, the quantum mechanical calculations were performed using both HF and time-dependent density functional theory at the B3LYP/6-31G（d,p） level. The molecular geometry from X-ray determination of the title compound in the ground state has been compared using the Hartree-Fock （HF） and density functional theory （DFT） with the 6-31G（d） basis set. The calculated results show that the DFT and HF can well reproduce the structure of the title compound. The energetic behavior of the title compound was examined using the B3LYP method with the 6-31G（d） basis set. The harmonic vibrational frequencies calculated have been compared with the experimental FTIR and FT-Raman spectra. The restricted Hartree-Fock and density functional theory-based nuclear magnetic resonance （NMR） calculation procedure was also performed, and it was used for assigning the 13C and 1H NMR chemical shifts of the title compound. Moreover, molecular electrostatic potential and thermodynamic parameters of the title compound were investigated by theoretical calculations.展开更多
The new title compound, chiral 2-（3-methyl-2,3-dihydrobenzo[b][1,4]oxazin-4-yl）- 2-oxoethyl acetate, has been synthesized via reduction, cyclization and acylation reaction. The structure of the product has been conf...The new title compound, chiral 2-（3-methyl-2,3-dihydrobenzo[b][1,4]oxazin-4-yl）- 2-oxoethyl acetate, has been synthesized via reduction, cyclization and acylation reaction. The structure of the product has been confirmed by IR, 1H NMR, 13C NMR, LC-MS （ESI） and single-crystal X-ray diffraction. （R）-2-（3-methyl-2,3-dihydrobenzo[b][1,4]oxazin-4-yl）-2-oxoethyl acetate crystallizes in monoclinic, space group P21/c with a = 11.867（2）, b = 8.4087（2）, c = 14.325（6） A^°, β = 117.59（2）°, Z = 4, V = 1266.9（6） A^°3, Dc = 1.307 g/cm^3, F（000） = 528, μ（MoKα） = 0.097 mm-1, R = 0.0453 and wR = 0.1237; （S）-2-（3-methyl-2,3-dihydrobenzo[b][1,4]oxazin-4-yl）-2-oxoethyl acetate belongs to the triclinic system, space group P with a = 8.2647（17）, b = 8.7034（17）, c = 9.5479（19） A^°, α = 105.33（3）, β = 100.95（3）, γ = 105.14（3）°, Z = 2, V = 614.1（2） A^°3, Dc = 1.348 g/cm^3, F（000） = 264, μ（MoKα） = 0.10 mm-1, R = 0.0613 and wR = 0.1037. Both of the molecules prefer to form crystal packing through C–H…O hydrogen bonds.展开更多
Diesel engines are the major contributors of various types of air polluting gases like carbon monoxide, oxides of nitrogen, smoke, etc. Improvement of fuel properties is essential for suppression of Diesel pollutant e...Diesel engines are the major contributors of various types of air polluting gases like carbon monoxide, oxides of nitrogen, smoke, etc. Improvement of fuel properties is essential for suppression of Diesel pollutant emissions along with the optimization of design factors and after treatment equipment. Studies conducted in the past have shown that a significant reduction were obtained in the emissions using oxygenates. This paper investigates the performance and emission characteristics of a direct injection Diesel engine fueled with 2 Ethoxy Ethyl Acetate (EEA) blends. Different fuel blends which contain 5%, 10% and 15% of EEA were prepared and the effect of these blends on performance and emissions were studied on a single cylinder direct injection Diesel engine. The blends were tested under different load conditions and the result showed that EEA blended fuels improves the performance of the engine and reduce the emission level significantly.展开更多
Finishing using TiO2-nanosol treatment of cellulose acetate (CA) fabrics before and after the latter were pretreated with H2O2was undertaken with a view to impart unique properties to CA fabrics, notably, self-cleanin...Finishing using TiO2-nanosol treatment of cellulose acetate (CA) fabrics before and after the latter were pretreated with H2O2was undertaken with a view to impart unique properties to CA fabrics, notably, self-cleaning. Finishing was performed as per the pad-dry-cure method. The finishing treatment involved dispersing the nano-sized TiO2particles in a mixture of water and ethylene glycol (1:1) and application of the dispersions to CA fabrics was made under a variety of conditions. Self cleaning ability of the fabrics is favored by 1) increasing the concentration of TiO2-nanosol to certain limit;2) prolongation of curing time up to 15 second;3) raising the microwave power from 80% to 100% but with the certainty that power of 90% is the most proper. Besides, exposure time-to UV radiation-up to 90 minutes is essential to have remarkable self cleaning properties while keeping other technical properties, namely, strength, roughness and wettability practically unaltered. Incorporation of binder in the finishing pad-bath helps stabilizing the deposition of TiO2 with excellent self-cleaning. Pretreatment of CA fabrics with H2O2 is a pre requisite to guarantee excellent self-cleaning ability. Thermofixation and microwave fixation produces fabrics with very comparable technical properties.展开更多
基金Supported by Foundation for University Key Teacher by the Min-istry of Education
文摘The total synthesis of 3,7 dimethyl 2 tridecanyl acetate,the active component of the sex pheromone of diprion pini,was investigated in this paper.The two key synthins blocks,2 methyl octan 1 yl lithium and 3,4 dimethyl γ butyrolactone,were obtained from diethyl malonate and 2,3 epoxybutane.2 Methyl octan 1 yl lithium reacted with 3,4 dimethyl γ butyrolactone to yield the ketoalcohol and then followed by Huang Minlong reduction to afford 3,7 dimethyl 2 tridecanol,acylated with acetic anhydide to give 3,7 dimethyl 2 tridecanyl acetate.
文摘A series of indium oxide‐modified Cu/SiO2catalysts were synthesized and used to produce ethanol via methyl acetate hydrogenation.In‐Cu/SiO2catalyst containing1.0wt%In2O3exhibited the best catalytic activity and stability.The physicochemical properties of the synthesized catalysts were investigated using several characterization methods and the results showed that introducing suitable indium to Cu/SiO2increased the copper dispersion,diminished the copper crystallite size,and enriched the surface Cu+concentration.Furthermore,the Cu/SiO2catalyst gradually deactivated during the stability test,which was mainly attributed to copper sintering and the valence change in surface copper species.In contrast,indium addition can inhibit the thermal transmigration and accumulation of copper nanoparticles to stabilize the catalyst.?2018,Dalian Institute of Chemical Physics,Chinese Academy of Sciences.Published by Elsevier B.V.All rights reserved.
文摘The CaCl2 solubility in 2-methyl-butanol acetate and the vapor pressure of 2-methyl-butanol acetate containing CaCl2 were measured in the range of 90-135°C and from very low salt concentration to saturation.The experimental data were correlated with two equations,a modified Antoine equation with the dissolved salt taken into account and a nonrandom two liquid-electrolyte（e-NRTL）model.Both models are in good agreement with the experimental data.This study provides essential physical data for further investigation of vapor-liquid equilibrium system containing salt.
基金supported by the National Basic Research Program of China(No.2014CB643401)the National Natural Science Foundation of China(Nos.51134007 and 51474256)
文摘A novel copper（Ⅱ） complex with tert-butyl 2-[N-（tert-butyloxycarbonylmethyl）-2-picolyamino]acetate（ampy） was synthesized and structurally characterized by elemental analysis, FT-IR spectrum, electrospray ionization-mass spectrometry, UV-vis spectrum and single-crystal X-ray diffraction, respectively. A mononuclear copper（II） complex with ampy, [Cu（ampy）Cl2]（1）, was formed irrespective of the metal-to-ligand molar ratios（[Cu2＋]：[ampy] = 0.5：1, 1：1, and 2：1） as a single product. Complex 1 crystallizes in the orthorhombic system, space group Pbca with a = 12.343（2）, b = 18.928（3）, c = 20.058（4） A, V = 4686.1（14） A3, Z = 8, Dc = 1.3349（4） g/cm3, F（000） = 1920, S = 1.016, R = 0.0693 and w R = 0.1721 for 3151 observed reflections with I 〉 2σ（I）. X-ray diffraction analysis reveals that the central copper（II） ion is bound by pyridyl N, tertiary amine N and carbonyl O atoms of the quadridentate ampy as well as two Cl anions, constructing a slightly distorted octahedral geometry. Complex 1 further constructs a stable 3D supramolecular architecture by intermolecular C–H…Cl hydrogen bonds. In addition, the molecular geometry was calculated by density functional theory（DFT/B3LYP） method with the basis sets（6-31＋G（d,p） for H, C, N, O and Cl atoms, and LANL2 DZ for Cu atom, respectively）. The calculated results show that the optimized geometrical parameters are in good agreement with the experimental data. Natural bond orbital（NBO） analysis and frontier molecular orbitals（FMOs） analysis were investigated at the same level.
基金supported by National Natural Science Foundation of China (No.22102147 and 22002151)State Key Laboratory of Chemical Engineering (No.SKL-ChE-22A02)+2 种基金Zhejiang Provincial Natural Science Foundation of China under Grant No.LQ21B030009the Strategic Priority Research Program of the Chinese Academy of Sciences (No.XDA29050300)Qinchuang Yuan high-level innovation and entrepreneurship talents implementing project (No.QCYRCXM-2022-177)。
文摘Product selectivity and reaction pathway are highly dependent on surface structure of heterogeneous catalysts.For vapor-phase hydrogenation of dimethyl oxalate(DMO),"EG route"(DMO→methyl glycolate(MG)ethylene glycol(EG)→ethanol(ET))and"MA route"(DMO→MG→methyl acetate(MA))were proposed over traditional Cu based catalysts and Mo-based or Fe-based catalysts,respectively.Herein,tunable yield of ET(93.7%)and MA(72.1%)were obtained through different reaction routes over WO_(x) modified Cu/SiO_(2) catalysts,and the corresponding reaction route was further proved by kinetic study and in-situ DRIFTS technology.Mechanistic studies demonstrated that H_(2) activation ability,acid density and Cu-WO_(x) interaction on the catalysts were tuned by regulating the surface W density,which resulted in the different reaction pathway and product selectivity.What's more,high yield of MA produced from DMO hydrogenation was firstly reported with the H_(2) pressure as low as 0.5 MPa.
文摘The title compound was synthesized by the base catalyzed reaction of 5-（（quinolin- 8-yloxy）methyl）-1,3,4-oxadiazole-2（3H）-thione with methyl chloroacetate. The structure was supported by the spectroscopic data and unambiguously confirmed by single-crystal X-ray diffraction studies. It crystallizes from a methanol solution in the triclinic space group Pi with unit cell dimensions a = 7.4509（9）, b = 10.2389（12）, c = 12.2299（15）A, a = 74.771（2）, β = 77.956（2）, 7 = 69.263（2）°, V = 834.98（17） A3 and Z = 2. In order to gain some valuable insights into the molecular structure, the quantum mechanical calculations were performed using both HF and time-dependent density functional theory at the B3LYP/6-31G（d,p） level. The molecular geometry from X-ray determination of the title compound in the ground state has been compared using the Hartree-Fock （HF） and density functional theory （DFT） with the 6-31G（d） basis set. The calculated results show that the DFT and HF can well reproduce the structure of the title compound. The energetic behavior of the title compound was examined using the B3LYP method with the 6-31G（d） basis set. The harmonic vibrational frequencies calculated have been compared with the experimental FTIR and FT-Raman spectra. The restricted Hartree-Fock and density functional theory-based nuclear magnetic resonance （NMR） calculation procedure was also performed, and it was used for assigning the 13C and 1H NMR chemical shifts of the title compound. Moreover, molecular electrostatic potential and thermodynamic parameters of the title compound were investigated by theoretical calculations.
基金supported by the National Natural Science Foundation of China(No.31572042)Natural Science Foundation of Heilongjiang Province(B201303)the Research Science Foundation in Technology Innovation of Harbin(No.2015RAYXJ010)
文摘The new title compound, chiral 2-（3-methyl-2,3-dihydrobenzo[b][1,4]oxazin-4-yl）- 2-oxoethyl acetate, has been synthesized via reduction, cyclization and acylation reaction. The structure of the product has been confirmed by IR, 1H NMR, 13C NMR, LC-MS （ESI） and single-crystal X-ray diffraction. （R）-2-（3-methyl-2,3-dihydrobenzo[b][1,4]oxazin-4-yl）-2-oxoethyl acetate crystallizes in monoclinic, space group P21/c with a = 11.867（2）, b = 8.4087（2）, c = 14.325（6） A^°, β = 117.59（2）°, Z = 4, V = 1266.9（6） A^°3, Dc = 1.307 g/cm^3, F（000） = 528, μ（MoKα） = 0.097 mm-1, R = 0.0453 and wR = 0.1237; （S）-2-（3-methyl-2,3-dihydrobenzo[b][1,4]oxazin-4-yl）-2-oxoethyl acetate belongs to the triclinic system, space group P with a = 8.2647（17）, b = 8.7034（17）, c = 9.5479（19） A^°, α = 105.33（3）, β = 100.95（3）, γ = 105.14（3）°, Z = 2, V = 614.1（2） A^°3, Dc = 1.348 g/cm^3, F（000） = 264, μ（MoKα） = 0.10 mm-1, R = 0.0613 and wR = 0.1037. Both of the molecules prefer to form crystal packing through C–H…O hydrogen bonds.
文摘Diesel engines are the major contributors of various types of air polluting gases like carbon monoxide, oxides of nitrogen, smoke, etc. Improvement of fuel properties is essential for suppression of Diesel pollutant emissions along with the optimization of design factors and after treatment equipment. Studies conducted in the past have shown that a significant reduction were obtained in the emissions using oxygenates. This paper investigates the performance and emission characteristics of a direct injection Diesel engine fueled with 2 Ethoxy Ethyl Acetate (EEA) blends. Different fuel blends which contain 5%, 10% and 15% of EEA were prepared and the effect of these blends on performance and emissions were studied on a single cylinder direct injection Diesel engine. The blends were tested under different load conditions and the result showed that EEA blended fuels improves the performance of the engine and reduce the emission level significantly.
文摘Finishing using TiO2-nanosol treatment of cellulose acetate (CA) fabrics before and after the latter were pretreated with H2O2was undertaken with a view to impart unique properties to CA fabrics, notably, self-cleaning. Finishing was performed as per the pad-dry-cure method. The finishing treatment involved dispersing the nano-sized TiO2particles in a mixture of water and ethylene glycol (1:1) and application of the dispersions to CA fabrics was made under a variety of conditions. Self cleaning ability of the fabrics is favored by 1) increasing the concentration of TiO2-nanosol to certain limit;2) prolongation of curing time up to 15 second;3) raising the microwave power from 80% to 100% but with the certainty that power of 90% is the most proper. Besides, exposure time-to UV radiation-up to 90 minutes is essential to have remarkable self cleaning properties while keeping other technical properties, namely, strength, roughness and wettability practically unaltered. Incorporation of binder in the finishing pad-bath helps stabilizing the deposition of TiO2 with excellent self-cleaning. Pretreatment of CA fabrics with H2O2 is a pre requisite to guarantee excellent self-cleaning ability. Thermofixation and microwave fixation produces fabrics with very comparable technical properties.
