Quasi-2D perovskites have attracted tremendous interest for application as lightemission layers in light-emitting diodes(LEDs).However,the heterogeneous n phase and non-uniform distribution still severely limit the fu...Quasi-2D perovskites have attracted tremendous interest for application as lightemission layers in light-emitting diodes(LEDs).However,the heterogeneous n phase and non-uniform distribution still severely limit the further development of quasi-2D perovskite LEDs(Pero-LEDs).Meanwhile,the increased defect density caused by the reduced dimension and grain size induces non-radiative recombination and further deteriorates the device performance.Here,we found that a series of molecules containing phosphoryl chloride functional groups have noticeable enhancement effects on the device performance of quasi-2D Pero-LEDs.Then,we studied the modification mechanism by focusing on the bis(2-oxo-3-oxazolidinyl)phosphinic chloride(BOPCl).It is concluded that the BOPCl can not only regulate the phase distribution by decreasing the crystallization rate but also remain in the grain boundaries and passivate the defects.As a result,the corresponding quasi-2D Pero-LEDs obtained a maximum external quantum efficiency(EQE_(max))of 20.82%and an average EQE(EQE_(ave))of around 20%on the optimal 50 devices,proving excellent reproducibility.Our work provides a new selection of molecular types for regulating the crystallization and passivating the defects of quasi-2D perovskite films.展开更多
2,2'-Arylmethylene bis(3-hydroxy-5,5-dimethyl-2-cyclohexene-1-one) 4l-s produced from reaction between dimedone with various aldehydes in acetonitrile using ZnO as a catalyst;whereas in the presence of ZnO-acetyl ...2,2'-Arylmethylene bis(3-hydroxy-5,5-dimethyl-2-cyclohexene-1-one) 4l-s produced from reaction between dimedone with various aldehydes in acetonitrile using ZnO as a catalyst;whereas in the presence of ZnO-acetyl chloride catalysts the reaction is limited to give only 1,8-dioxo-octahydroxanthenes 3a-k in very good yields.展开更多
A novel technology of removing H2S with cupric chloride solution was developed in this paper. Cupric as the form of CuS deposition, the CuS produced was then oxidized by excessive cupric ion in another reactor meanwhi...A novel technology of removing H2S with cupric chloride solution was developed in this paper. Cupric as the form of CuS deposition, the CuS produced was then oxidized by excessive cupric ion in another reactor meanwhile cupric ion that has been consumed can be recovered by the oxidization of CuCl2- with oxygen in air,and the solution can be circulated. Moreover, the leaching kinetics of CuS by cupric ion was studied. The removal efficiency of H2S is close to 100%, and the required operating condition is mild. Compared with other wet oxidization methods, no raw material is consumed except O2 in air, the process has no secondary pollution and no problem of degradation and scale, and the absorbent is much stable and reliable.展开更多
The corrosion behaviors of ultra-high strength steel 30CrMnSiNi2A in sodium chloride solution were studied by weight loss and electrochemical methods. The morphology of corrosion products was observed using scanning e...The corrosion behaviors of ultra-high strength steel 30CrMnSiNi2A in sodium chloride solution were studied by weight loss and electrochemical methods. The morphology of corrosion products was observed using scanning electron microscopy（SEM） and the composition was analyzed using an energy dispersive spectroscopy（EDS） and X-Ray diffraction （XRD）. The experimental results showed that the corrosion came from pitting corrosion and the rust layer was composed of outer rust layer γ-FeOOH and inner rust layer Fe_2O_3 with a little β-FeOOH. The correlation between corrosion rate and test time accorded with exponential rule. The corrosion current measured by polarization methods was higher than that calculated by weight loss method after a long-time immersion, the main reason was that,β-FeOOH and γ-Fe_2O_3 transformed by γ-FeOOH led to overestimating corrosion rate. The processes of corrosion prophase were obtained from XRD and EIS results. The corrosion product, Fe（OH）_2 formed at the initial stage stayed at a non-steady state and then consequently transferred to γ-FeOOH, γ-Fe_2O_3 or β-FeOOH.展开更多
The effects of BaCl2 on the flotation of K-feldspar using dodecyl amine chloride as the collector under natural pH wereinvestigated by flotation tests, absorption measurements, Fourier transform infrared spectroscopy ...The effects of BaCl2 on the flotation of K-feldspar using dodecyl amine chloride as the collector under natural pH wereinvestigated by flotation tests, absorption measurements, Fourier transform infrared spectroscopy （FTIR） and X-ray photoelectronspectroscopy （XPS）. The results indicated that lower BaCl2 concentration can increase the floatability of K-feldspar, whereas higherBaCl2 concentration can significantly inhibit the flotation of K-feldspar. Peaks at 3548.18, 3475.56 and 3414.35 cm？1in the FTIRspectra of K-feldspar adsorbed by dodecyl amine chloride revealed three forms of -OH. XPS analyses of K-feldspar adsorbed byBa2＋ showed that the concentration of K atom was reduced by nearly twice as those of Si, Al, and O. The activation of BaCl2 at a lowconcentration was mainly caused by Ba2＋ in the form of the ion exchange between K＋ and Ba2＋. The inhibitory action of BaCl2 at ahigh concentration is mainly attributed to the physical absorption of Ba2＋ on the surface of K-feldspar and the fact that a highconcentration of Cl？ causes the chemical equilibrium of dodecyl amine chloride to be changed, and the dodecyl amine chloride in theform of RNH2H＋ is reduced.展开更多
Solubilities of CO_2, CH_4, H_2, CO and N_2 in choline chloride/urea(ChCl/Urea) were investigated at temperatures ranging from 308.2 to328.2 K and pressures ranging from 0.6 to 4.6 MPa. The results show that the solub...Solubilities of CO_2, CH_4, H_2, CO and N_2 in choline chloride/urea(ChCl/Urea) were investigated at temperatures ranging from 308.2 to328.2 K and pressures ranging from 0.6 to 4.6 MPa. The results show that the solubilities of gases increase with increasing pressure and decreasing temperature. The solubility of CO_2 is higher than that of CH_4, H_2, CO and N_2, which indicates that ChCl/Urea may be used as a potential solvent for CO_2 capture from the gas mixture. Solubility of CO_2 in ChCl/Urea was fitted by Non-Random Two-Liquid and Redlich-Kwong(NRTL-RK) model, and solubility of CH_4, H_2, CO or N_2 in ChCl/Urea was fitted by Henry's Law. The standard enthalpy, standard Gibbs energy and standard entropy of gases were calculated. Additionally, the CO_2/CH_4 selectivities in water, dry ChCl/Urea and aqueous ChCl/Urea were further discussed.展开更多
LiNi0.8Co0.1Mn0.1O2 was prepared by a chloride co-precipitation method and characterized by thermogravimetric analysis, X-ray diffractometry with Rietveld refinement,electron scanning microscopy and electrochemical me...LiNi0.8Co0.1Mn0.1O2 was prepared by a chloride co-precipitation method and characterized by thermogravimetric analysis, X-ray diffractometry with Rietveld refinement,electron scanning microscopy and electrochemical measurements.Effects of lithium ion content and sintering temperature on physical and electrochemical performance of LiNi0.8Co0.1Mn0.1O2 were also investigated. The results show that the sample synthesized at 750℃with 105%lithium content has fine particle sizes around 200 nm and homogenous sizes distribution.The initial discharge capacity for the powder is 184 mA·h/g between 2.7 and 4.3 V at 0.1C and room temperature.展开更多
D2EHPA(P204),tri-butyl-phosphate(TBP)and sodium chloride(NaCl)were attractive for selective extraction of scandium from acid leaching solution of red mud.The extraction parameters of P204 concentration(X_(P204)),NaCl ...D2EHPA(P204),tri-butyl-phosphate(TBP)and sodium chloride(NaCl)were attractive for selective extraction of scandium from acid leaching solution of red mud.The extraction parameters of P204 concentration(X_(P204)),NaCl concentration(C_(NaCl)),pH value,reaction time,stirring speed and O/A were investigated to extract scandium and separate iron from the acid leaching solution.The extraction mechanism was analyzed by Fourier transform infrared spectroscopy(FT-IR)and thermodynamic theory.The single-stage extraction efficiency of scandium,iron andβ(Sc/Fe)were 99.1%,9.4%and 1061.2,respectively,with C_(NaCl) of 75 g/L and XP204 of 0.75 at solution pH value of 1.2 and stirring speed of 200 r/min for 6 min,in which a good separation effect of scandium and iron was obtained.The vibration absorption peak Sc─O was contributed to the extraction of scandium with P204.The complex[FeCln]^(3−n) existed in the solution with adding NaCl into the acid leaching solution.The value of n was higher and the valence state of the complex[FeCln]^(3−n) was lower with an increase of chloride concentration,which restricts the extraction efficiency of iron with P204.The extraction of three stages in the counter-current simulation experiments was carried out according to the McCabe-Thiele diagram.Gibbs free energy change(ΔG)of−5.93 kJ/mol,enthalpy change(ΔH)of 23.45 kJ/mol and entropy change(ΔH)of 98.54 J/(mol·K)were obtained in the solvent extraction proces,which indicate that the extraction reaction is easily spontaneous and endothermic and a proper increase of temperature is conducive to the extraction of scandium.展开更多
Silica-supported tin chloride and titanium tetrachloride were prepared by the reaction of tin chloride and titanium tetrachloride with activated silica gel in refluxing toluene.These solid acids have been employed as ...Silica-supported tin chloride and titanium tetrachloride were prepared by the reaction of tin chloride and titanium tetrachloride with activated silica gel in refluxing toluene.These solid acids have been employed as the catalysts for the synthesis of bisdihydropyrimidin -2(1H)-ones from aromatic dialdehydes,1,3-dicarbonyl compounds and urea at 90℃under solvent-free conditions.展开更多
The effects of chloride salts(NaCl,MgCl2and NH4Cl)on the hydrolysis kinetics of MgH2prepared by hydridingcombustion synthesis and mechanical milling(HCS+MM)were discussed.X-ray diffraction(XRD)analyses show that high-...The effects of chloride salts(NaCl,MgCl2and NH4Cl)on the hydrolysis kinetics of MgH2prepared by hydridingcombustion synthesis and mechanical milling(HCS+MM)were discussed.X-ray diffraction(XRD)analyses show that high-purityMgH2was successfully prepared by HCS.Hydrolysis performance test results indicate that the chloride salt added during the millingprocess is favorable to the initial reaction rate and hydrogen generation yield within60min.A MgH2?10%NH4Cl composite exhibitsthe best performance with the hydrogen generation yield of1311mL/g and a conversion rate of85.69%in60min at roomtemperature.It is suggested that the chloride salts not only play as grinding aids in the milling process,but also create fresh surface ofreactive materials,favoring the hydrolysis reaction.展开更多
The title compound, 4-tert-butyl-6-（4-chlorophenyl）-3,6-dihydro-2H-1,3-thiazin- 2-iminium chloride （C14H18C12N2S）, has been synthesized by the reaction of 1-（4-chlorophenyl）- 4,4-dimethylpent-1-en-3-one with thi...The title compound, 4-tert-butyl-6-（4-chlorophenyl）-3,6-dihydro-2H-1,3-thiazin- 2-iminium chloride （C14H18C12N2S）, has been synthesized by the reaction of 1-（4-chlorophenyl）- 4,4-dimethylpent-1-en-3-one with thiourea, and its crystal structure was determined by single- crystal X-ray diffraction. The crystal belongs to the monoclinic system, space group P211c with a = 16.3064（11）, b = 9.4471（6）, c = 11.2626 （8）A, β = 108.400（1）°, Z = 4, V = 1646.28（19） A^3, Mr = 317.26, Dc = 1.280 g/cm^3, S = 1.078,μ = 0.510 mm^-1, F（000） = 664, the final R = 0.0514 and wR = 0.1412 for 3210 observed reflections （I 〉 2σ（I））. The thiazine ring system displays a twisted boat conformation, and three N-H,..Cl hydrogen bonds exist in the crystal. The combination of two N-H...Cl hydrogen bonds generate an R2^1 （6） ring.展开更多
The CaCl2 solubility in 2-methyl-butanol acetate and the vapor pressure of 2-methyl-butanol acetate containing CaCl2 were measured in the range of 90-135°C and from very low salt concentration to saturation.The e...The CaCl2 solubility in 2-methyl-butanol acetate and the vapor pressure of 2-methyl-butanol acetate containing CaCl2 were measured in the range of 90-135°C and from very low salt concentration to saturation.The experimental data were correlated with two equations,a modified Antoine equation with the dissolved salt taken into account and a nonrandom two liquid-electrolyte（e-NRTL）model.Both models are in good agreement with the experimental data.This study provides essential physical data for further investigation of vapor-liquid equilibrium system containing salt.展开更多
In this paper a polyaluminum chloride solution with high Al13 content was prepared and used as raw material for preparation ofγ-Al2O3.The texture and crystalline phase of the prepared alumina samples were characteriz...In this paper a polyaluminum chloride solution with high Al13 content was prepared and used as raw material for preparation ofγ-Al2O3.The texture and crystalline phase of the prepared alumina samples were characterized by energy dispersive X-ray spectroscopy(EDX) ,X-ray diffraction,transmission electron microscope(TEM) and nuclear magnetic resonance(NMR) analyses.The effects of alkaline solution and calcination temperature were investigated.The results showed that alkaline solution including NH3·H2O and NaOH had little effect on the alumina sample formation.The impurities of NH4Cl and NaCl in solution can be removed through repeated washing by EDX analysis.Calcination temperature had a significant effect on alumina crystal phase.The alumina sample can transform completely toγ-Al2O3 in the subsequent heating from 600°C to 800°C.It is very interesting that Al13 can be existed inγ-Al2O3 phase even after calcinations.The results indicate that polyaluminum chloride with high Al13 content is an effective material to prepareγ-Al2O3.展开更多
基金supported by the National Natural Science Foundation of China(U21A2078)Natural Science Foundation of Fujian Province(2020J06021,2019J01057,and 2020J01064)Scientific Research Funds of Huaqiao University.
文摘Quasi-2D perovskites have attracted tremendous interest for application as lightemission layers in light-emitting diodes(LEDs).However,the heterogeneous n phase and non-uniform distribution still severely limit the further development of quasi-2D perovskite LEDs(Pero-LEDs).Meanwhile,the increased defect density caused by the reduced dimension and grain size induces non-radiative recombination and further deteriorates the device performance.Here,we found that a series of molecules containing phosphoryl chloride functional groups have noticeable enhancement effects on the device performance of quasi-2D Pero-LEDs.Then,we studied the modification mechanism by focusing on the bis(2-oxo-3-oxazolidinyl)phosphinic chloride(BOPCl).It is concluded that the BOPCl can not only regulate the phase distribution by decreasing the crystallization rate but also remain in the grain boundaries and passivate the defects.As a result,the corresponding quasi-2D Pero-LEDs obtained a maximum external quantum efficiency(EQE_(max))of 20.82%and an average EQE(EQE_(ave))of around 20%on the optimal 50 devices,proving excellent reproducibility.Our work provides a new selection of molecular types for regulating the crystallization and passivating the defects of quasi-2D perovskite films.
基金support from the Research Council of University of Sistan and Baluchestan, Iran
文摘2,2'-Arylmethylene bis(3-hydroxy-5,5-dimethyl-2-cyclohexene-1-one) 4l-s produced from reaction between dimedone with various aldehydes in acetonitrile using ZnO as a catalyst;whereas in the presence of ZnO-acetyl chloride catalysts the reaction is limited to give only 1,8-dioxo-octahydroxanthenes 3a-k in very good yields.
文摘A novel technology of removing H2S with cupric chloride solution was developed in this paper. Cupric as the form of CuS deposition, the CuS produced was then oxidized by excessive cupric ion in another reactor meanwhile cupric ion that has been consumed can be recovered by the oxidization of CuCl2- with oxygen in air,and the solution can be circulated. Moreover, the leaching kinetics of CuS by cupric ion was studied. The removal efficiency of H2S is close to 100%, and the required operating condition is mild. Compared with other wet oxidization methods, no raw material is consumed except O2 in air, the process has no secondary pollution and no problem of degradation and scale, and the absorbent is much stable and reliable.
基金Funded by the National Natural Science Foundation of China(No.51171011)
文摘The corrosion behaviors of ultra-high strength steel 30CrMnSiNi2A in sodium chloride solution were studied by weight loss and electrochemical methods. The morphology of corrosion products was observed using scanning electron microscopy（SEM） and the composition was analyzed using an energy dispersive spectroscopy（EDS） and X-Ray diffraction （XRD）. The experimental results showed that the corrosion came from pitting corrosion and the rust layer was composed of outer rust layer γ-FeOOH and inner rust layer Fe_2O_3 with a little β-FeOOH. The correlation between corrosion rate and test time accorded with exponential rule. The corrosion current measured by polarization methods was higher than that calculated by weight loss method after a long-time immersion, the main reason was that,β-FeOOH and γ-Fe_2O_3 transformed by γ-FeOOH led to overestimating corrosion rate. The processes of corrosion prophase were obtained from XRD and EIS results. The corrosion product, Fe（OH）_2 formed at the initial stage stayed at a non-steady state and then consequently transferred to γ-FeOOH, γ-Fe_2O_3 or β-FeOOH.
基金Project(51764021)supported by the Key Program of the National Natural Science Foundation of China
文摘The effects of BaCl2 on the flotation of K-feldspar using dodecyl amine chloride as the collector under natural pH wereinvestigated by flotation tests, absorption measurements, Fourier transform infrared spectroscopy （FTIR） and X-ray photoelectronspectroscopy （XPS）. The results indicated that lower BaCl2 concentration can increase the floatability of K-feldspar, whereas higherBaCl2 concentration can significantly inhibit the flotation of K-feldspar. Peaks at 3548.18, 3475.56 and 3414.35 cm？1in the FTIRspectra of K-feldspar adsorbed by dodecyl amine chloride revealed three forms of -OH. XPS analyses of K-feldspar adsorbed byBa2＋ showed that the concentration of K atom was reduced by nearly twice as those of Si, Al, and O. The activation of BaCl2 at a lowconcentration was mainly caused by Ba2＋ in the form of the ion exchange between K＋ and Ba2＋. The inhibitory action of BaCl2 at ahigh concentration is mainly attributed to the physical absorption of Ba2＋ on the surface of K-feldspar and the fact that a highconcentration of Cl？ causes the chemical equilibrium of dodecyl amine chloride to be changed, and the dodecyl amine chloride in theform of RNH2H＋ is reduced.
基金the Swedish Energy AgencySwedish Research Council in Sweden for financial support
文摘Solubilities of CO_2, CH_4, H_2, CO and N_2 in choline chloride/urea(ChCl/Urea) were investigated at temperatures ranging from 308.2 to328.2 K and pressures ranging from 0.6 to 4.6 MPa. The results show that the solubilities of gases increase with increasing pressure and decreasing temperature. The solubility of CO_2 is higher than that of CH_4, H_2, CO and N_2, which indicates that ChCl/Urea may be used as a potential solvent for CO_2 capture from the gas mixture. Solubility of CO_2 in ChCl/Urea was fitted by Non-Random Two-Liquid and Redlich-Kwong(NRTL-RK) model, and solubility of CH_4, H_2, CO or N_2 in ChCl/Urea was fitted by Henry's Law. The standard enthalpy, standard Gibbs energy and standard entropy of gases were calculated. Additionally, the CO_2/CH_4 selectivities in water, dry ChCl/Urea and aqueous ChCl/Urea were further discussed.
基金Project(2007CB613607)supported by National Basic Research Program of China
文摘LiNi0.8Co0.1Mn0.1O2 was prepared by a chloride co-precipitation method and characterized by thermogravimetric analysis, X-ray diffractometry with Rietveld refinement,electron scanning microscopy and electrochemical measurements.Effects of lithium ion content and sintering temperature on physical and electrochemical performance of LiNi0.8Co0.1Mn0.1O2 were also investigated. The results show that the sample synthesized at 750℃with 105%lithium content has fine particle sizes around 200 nm and homogenous sizes distribution.The initial discharge capacity for the powder is 184 mA·h/g between 2.7 and 4.3 V at 0.1C and room temperature.
基金Projects(51904097,51804103)supported by the National Natural Science Foundation of ChinaProject(2019GGJS056)supported by the Training Program for Young Backbone Teachers in Colleges and Universities of Henan Province,China+2 种基金Project(HB201905)supported by Open Foundation of State Environmental Protection Key Laboratory of Mineral Metallurgical Resources Utilization and Pollution Control,ChinaProject(202102310548)supported by Scientific and Technological Project of Henan Province,ChinaProject(21IRTSTHN006)supported by Program for Innovative Research Team in the University of Henan Province,China。
文摘D2EHPA(P204),tri-butyl-phosphate(TBP)and sodium chloride(NaCl)were attractive for selective extraction of scandium from acid leaching solution of red mud.The extraction parameters of P204 concentration(X_(P204)),NaCl concentration(C_(NaCl)),pH value,reaction time,stirring speed and O/A were investigated to extract scandium and separate iron from the acid leaching solution.The extraction mechanism was analyzed by Fourier transform infrared spectroscopy(FT-IR)and thermodynamic theory.The single-stage extraction efficiency of scandium,iron andβ(Sc/Fe)were 99.1%,9.4%and 1061.2,respectively,with C_(NaCl) of 75 g/L and XP204 of 0.75 at solution pH value of 1.2 and stirring speed of 200 r/min for 6 min,in which a good separation effect of scandium and iron was obtained.The vibration absorption peak Sc─O was contributed to the extraction of scandium with P204.The complex[FeCln]^(3−n) existed in the solution with adding NaCl into the acid leaching solution.The value of n was higher and the valence state of the complex[FeCln]^(3−n) was lower with an increase of chloride concentration,which restricts the extraction efficiency of iron with P204.The extraction of three stages in the counter-current simulation experiments was carried out according to the McCabe-Thiele diagram.Gibbs free energy change(ΔG)of−5.93 kJ/mol,enthalpy change(ΔH)of 23.45 kJ/mol and entropy change(ΔH)of 98.54 J/(mol·K)were obtained in the solvent extraction proces,which indicate that the extraction reaction is easily spontaneous and endothermic and a proper increase of temperature is conducive to the extraction of scandium.
文摘Silica-supported tin chloride and titanium tetrachloride were prepared by the reaction of tin chloride and titanium tetrachloride with activated silica gel in refluxing toluene.These solid acids have been employed as the catalysts for the synthesis of bisdihydropyrimidin -2(1H)-ones from aromatic dialdehydes,1,3-dicarbonyl compounds and urea at 90℃under solvent-free conditions.
基金Projects(51571112,51171079,51471087) supported by the National Natural Science Foundation of ChinaProject(13KJA430003) supported by Jiangsu Higher Education Institutions of China+1 种基金Project supported by Qing Lan Project,ChinaProject supported by the Priority Academic Program Development(PAPD) of Jiangsu Higher Education Institutions,China
文摘The effects of chloride salts(NaCl,MgCl2and NH4Cl)on the hydrolysis kinetics of MgH2prepared by hydridingcombustion synthesis and mechanical milling(HCS+MM)were discussed.X-ray diffraction(XRD)analyses show that high-purityMgH2was successfully prepared by HCS.Hydrolysis performance test results indicate that the chloride salt added during the millingprocess is favorable to the initial reaction rate and hydrogen generation yield within60min.A MgH2?10%NH4Cl composite exhibitsthe best performance with the hydrogen generation yield of1311mL/g and a conversion rate of85.69%in60min at roomtemperature.It is suggested that the chloride salts not only play as grinding aids in the milling process,but also create fresh surface ofreactive materials,favoring the hydrolysis reaction.
基金supported by the National Project of Scientific and Technical Supporting Programs Funded by Ministry of Science & Technology of China (No 2006BAE01A01-4)
文摘The title compound, 4-tert-butyl-6-（4-chlorophenyl）-3,6-dihydro-2H-1,3-thiazin- 2-iminium chloride （C14H18C12N2S）, has been synthesized by the reaction of 1-（4-chlorophenyl）- 4,4-dimethylpent-1-en-3-one with thiourea, and its crystal structure was determined by single- crystal X-ray diffraction. The crystal belongs to the monoclinic system, space group P211c with a = 16.3064（11）, b = 9.4471（6）, c = 11.2626 （8）A, β = 108.400（1）°, Z = 4, V = 1646.28（19） A^3, Mr = 317.26, Dc = 1.280 g/cm^3, S = 1.078,μ = 0.510 mm^-1, F（000） = 664, the final R = 0.0514 and wR = 0.1412 for 3210 observed reflections （I 〉 2σ（I））. The thiazine ring system displays a twisted boat conformation, and three N-H,..Cl hydrogen bonds exist in the crystal. The combination of two N-H...Cl hydrogen bonds generate an R2^1 （6） ring.
文摘The CaCl2 solubility in 2-methyl-butanol acetate and the vapor pressure of 2-methyl-butanol acetate containing CaCl2 were measured in the range of 90-135°C and from very low salt concentration to saturation.The experimental data were correlated with two equations,a modified Antoine equation with the dissolved salt taken into account and a nonrandom two liquid-electrolyte（e-NRTL）model.Both models are in good agreement with the experimental data.This study provides essential physical data for further investigation of vapor-liquid equilibrium system containing salt.
基金Supported by National Natural Science Foundation of China（50708109 40673003） the Scientific Research Foundation for the Returned Overseas Chinese Scholars State Education Ministry（ITLXHG2009071702） the Special Fund from the State Key Laboratory of Environmental Aquatic Chemistry（09Y02ESPCR）
文摘In this paper a polyaluminum chloride solution with high Al13 content was prepared and used as raw material for preparation ofγ-Al2O3.The texture and crystalline phase of the prepared alumina samples were characterized by energy dispersive X-ray spectroscopy(EDX) ,X-ray diffraction,transmission electron microscope(TEM) and nuclear magnetic resonance(NMR) analyses.The effects of alkaline solution and calcination temperature were investigated.The results showed that alkaline solution including NH3·H2O and NaOH had little effect on the alumina sample formation.The impurities of NH4Cl and NaCl in solution can be removed through repeated washing by EDX analysis.Calcination temperature had a significant effect on alumina crystal phase.The alumina sample can transform completely toγ-Al2O3 in the subsequent heating from 600°C to 800°C.It is very interesting that Al13 can be existed inγ-Al2O3 phase even after calcinations.The results indicate that polyaluminum chloride with high Al13 content is an effective material to prepareγ-Al2O3.
