Observation and analysis with TEM show that the fine granular dispersed carbides in hypereutectoid zone of steel 20Cr2Ni4A are distributed in the matrix of large number of lath martensite after rare earth carburizing....Observation and analysis with TEM show that the fine granular dispersed carbides in hypereutectoid zone of steel 20Cr2Ni4A are distributed in the matrix of large number of lath martensite after rare earth carburizing. But while treating by conventional carburization and double quench hardening the retained carbides are finer and more dispersive, and its matrix is perfectly twin martersite. The different micrcotructures of matrix around carbide are formed with different kinds of carburization processes.展开更多
Studies were made of the effect of tempering at temperatures from 25 to 750℃ for 0.5 to 100 h on changes of hardness,precipitated phase and its alloying element content as well as activation energy of tempering for q...Studies were made of the effect of tempering at temperatures from 25 to 750℃ for 0.5 to 100 h on changes of hardness,precipitated phase and its alloying element content as well as activation energy of tempering for quenched steel 20Cr11MoVNbNB.Tempering of the steel at temperatures below 400℃ may be controlled by the diffusion of C atoms in α-Fe,and above 400℃,by diffusion of Cr,also Mo or V,in α-Fe.展开更多
Studies were made of the creep properties and structure change of steet 20Cr11MoVNbNB at 550-650℃.It is found that at 550℃ when creep stress>180 MPa there exists linear rela- tion with two different slopes β_1 a...Studies were made of the creep properties and structure change of steet 20Cr11MoVNbNB at 550-650℃.It is found that at 550℃ when creep stress>180 MPa there exists linear rela- tion with two different slopes β_1 and β-2 between transitional creep strain ε_β and creep time t^(1/3),and β_1(in initiol period)>β_2(in later period).The Creep rate of stable stage at 550℃ can be expressed by =Aσ exp(-Q_ /RT),where,n=4.7.A exp(-Q_ /RT)= 5.37×10^(-16).Apparent creep activation energy Q_ =430 kJ/mol at 550-650℃,which is much higher than the self-diffusion activation energy of atoms for matrix Fe.In creep process,as the creep stress and time increase,the total weight of precipitated phases and rela- tive weight of Cr,Mo and V increase,but those of Fe and Nb decrease in precipitated phases,展开更多
Study was made on the swerving of the curves of strength and hardness vs L-M parameter P=T(20+lgt)for steel 20Crl 1MoVNbNB aged at 550.600 and 650℃ for 0—5000 h,T being aging temperature in K and taging time in h.Th...Study was made on the swerving of the curves of strength and hardness vs L-M parameter P=T(20+lgt)for steel 20Crl 1MoVNbNB aged at 550.600 and 650℃ for 0—5000 h,T being aging temperature in K and taging time in h.The swerving seems to be due to:(1)the coarsening of the mean size of principal precipitate M_(23)C_6,(2)the precipitation of Laves phase MoFe_2;(3)the decrease of Mo content in matrix and(4)the recovery and recrystallization of the matrix phase.展开更多
In order to expand the application of steel 20 in precision device,fast multiple rotation rolling( FMRR) is applied to fabricate a nanostructured layer on the surface of steel 20. The FMRR samples are then Cr-Rare ear...In order to expand the application of steel 20 in precision device,fast multiple rotation rolling( FMRR) is applied to fabricate a nanostructured layer on the surface of steel 20. The FMRR samples are then Cr-Rare earth-boronized under low-temperature. The microstructure of the top surface layer is characterized by transmission electron microscopy( TEM). Microhardness of the top surface is measured by a Vickers microhardness tester. The boride layer is characterized by using scanning electron microscopy( SEM).Experimental results show that a nanostructured layer with their grain size range from 200 to 400 nm is obtained in the top surface layer. The microhardness of FMRR sample changes gradiently along the depth from about274 HV in the top surface layer to about 159 HV in the matrix,which is nearly 1.7 times harder than that of the original sample. The penetrating rate is enhanced significantly when the FMRR samples are Cr-Rare earthboronized at 600 ℃ for 6 h. Thickness of the boride layer increases to around 20 μm,which is nearly twice thicker than that of the original sample.展开更多
文摘Observation and analysis with TEM show that the fine granular dispersed carbides in hypereutectoid zone of steel 20Cr2Ni4A are distributed in the matrix of large number of lath martensite after rare earth carburizing. But while treating by conventional carburization and double quench hardening the retained carbides are finer and more dispersive, and its matrix is perfectly twin martersite. The different micrcotructures of matrix around carbide are formed with different kinds of carburization processes.
文摘Studies were made of the effect of tempering at temperatures from 25 to 750℃ for 0.5 to 100 h on changes of hardness,precipitated phase and its alloying element content as well as activation energy of tempering for quenched steel 20Cr11MoVNbNB.Tempering of the steel at temperatures below 400℃ may be controlled by the diffusion of C atoms in α-Fe,and above 400℃,by diffusion of Cr,also Mo or V,in α-Fe.
文摘Studies were made of the creep properties and structure change of steet 20Cr11MoVNbNB at 550-650℃.It is found that at 550℃ when creep stress>180 MPa there exists linear rela- tion with two different slopes β_1 and β-2 between transitional creep strain ε_β and creep time t^(1/3),and β_1(in initiol period)>β_2(in later period).The Creep rate of stable stage at 550℃ can be expressed by =Aσ exp(-Q_ /RT),where,n=4.7.A exp(-Q_ /RT)= 5.37×10^(-16).Apparent creep activation energy Q_ =430 kJ/mol at 550-650℃,which is much higher than the self-diffusion activation energy of atoms for matrix Fe.In creep process,as the creep stress and time increase,the total weight of precipitated phases and rela- tive weight of Cr,Mo and V increase,but those of Fe and Nb decrease in precipitated phases,
文摘Study was made on the swerving of the curves of strength and hardness vs L-M parameter P=T(20+lgt)for steel 20Crl 1MoVNbNB aged at 550.600 and 650℃ for 0—5000 h,T being aging temperature in K and taging time in h.The swerving seems to be due to:(1)the coarsening of the mean size of principal precipitate M_(23)C_6,(2)the precipitation of Laves phase MoFe_2;(3)the decrease of Mo content in matrix and(4)the recovery and recrystallization of the matrix phase.
文摘In order to expand the application of steel 20 in precision device,fast multiple rotation rolling( FMRR) is applied to fabricate a nanostructured layer on the surface of steel 20. The FMRR samples are then Cr-Rare earth-boronized under low-temperature. The microstructure of the top surface layer is characterized by transmission electron microscopy( TEM). Microhardness of the top surface is measured by a Vickers microhardness tester. The boride layer is characterized by using scanning electron microscopy( SEM).Experimental results show that a nanostructured layer with their grain size range from 200 to 400 nm is obtained in the top surface layer. The microhardness of FMRR sample changes gradiently along the depth from about274 HV in the top surface layer to about 159 HV in the matrix,which is nearly 1.7 times harder than that of the original sample. The penetrating rate is enhanced significantly when the FMRR samples are Cr-Rare earthboronized at 600 ℃ for 6 h. Thickness of the boride layer increases to around 20 μm,which is nearly twice thicker than that of the original sample.
