High pressure solidification rules of Al-Mg alloy needs to be discussed further for its wide range of application. Microstructures and phases of Al-25wt% Mg alloy solidified at 4 GPa were studied by optical microscope...High pressure solidification rules of Al-Mg alloy needs to be discussed further for its wide range of application. Microstructures and phases of Al-25wt% Mg alloy solidified at 4 GPa were studied by optical microscope,X-ray diffractmeter,energy dispersive X-ray spectroscopy and transmission electron microscopy( TEM). The microstructure evolution mechanism of Al-25Mg alloy under high pressure was analyzed. The result shows that the alloy consists of α-Al phase and Al 3 Mg 2 phase under normal pressure. However,only Al 12 Mg 17 phase forms without Al 3 Mg 2 phase at 4 GPa. In addition,Mg concentration in α-Al phase increases and that of the lattice constant also increases. The α-Al dendrite presents the broken arms under normal pressure, after high pressure solidification,the morphology of the dendrite tends to integrate and the size of the dendrite arms展开更多
The Mg65Cu25Y10 melts were quenched at a temperature of 973 K under various pressures in the range of 2-5 GPa and ambient pressure. The microstructure of the solidified specimens has been investigated by X-ray diffrac...The Mg65Cu25Y10 melts were quenched at a temperature of 973 K under various pressures in the range of 2-5 GPa and ambient pressure. The microstructure of the solidified specimens has been investigated by X-ray diffraction, transmission electron microscope and electron probe microanalysis. Experimental results show that the pressure has a great influence on the solidification microstructure of the Mg65Cu25Y10. At ambient pressure, the solidification products are Mg2(Cu,Y) and a very small amount of Y2O3 inclusion. As the pressure is above 2 GPa, a new Cu2(Y,Mg) phase appears, while Y2O3 is not observed at the pressure of 3, 4 and 5 GPa. When the pressure increases from 2 GPa to 5 GPa, the grain sizes of Mg2(Cu,Y) and Cu2(Y,Mg) decrease from 125, 96 nm to 80, 7 nm, respectively. The mechanisms for the effects of the pressure on the phase evolution and microstructure during solidification process of Mg65Cu25Y10 alloy have been discussed.展开更多
Jinping Underground laboratory for Nuclear Astrophysics(JUNA) will take the advantage of the ultra-low background of CJPL lab and high current accelerator based on an ECR source and a highly sensitive detector to dire...Jinping Underground laboratory for Nuclear Astrophysics(JUNA) will take the advantage of the ultra-low background of CJPL lab and high current accelerator based on an ECR source and a highly sensitive detector to directly study for the first time a number of crucial reactions occurring at their relevant stellar energies during the evolution of hydrostatic stars. In its first phase, JUNA aims at the direct measurements of^(25)Mg(p,γ)^(26)Al,^(19)F(p,α)^(16)O,^(13)C(α,n)^(16)O and ^(12)C(α,γ)^(16)O reactions. The experimental setup,which includes an accelerator system with high stability and high intensity, a detector system, and a shielding material with low background, will be established during the above research. The current progress of JUNA will be given.展开更多
基金Sponsored by the Scientific Research Foundation of Heilongjiang Institute of Science and Technology for the Introduction of High-Qualified Talents(Grant No.08-12)Department of Education of Heilongjiang Province Science and Technology Research Projects(Grant No.12523042)
文摘High pressure solidification rules of Al-Mg alloy needs to be discussed further for its wide range of application. Microstructures and phases of Al-25wt% Mg alloy solidified at 4 GPa were studied by optical microscope,X-ray diffractmeter,energy dispersive X-ray spectroscopy and transmission electron microscopy( TEM). The microstructure evolution mechanism of Al-25Mg alloy under high pressure was analyzed. The result shows that the alloy consists of α-Al phase and Al 3 Mg 2 phase under normal pressure. However,only Al 12 Mg 17 phase forms without Al 3 Mg 2 phase at 4 GPa. In addition,Mg concentration in α-Al phase increases and that of the lattice constant also increases. The α-Al dendrite presents the broken arms under normal pressure, after high pressure solidification,the morphology of the dendrite tends to integrate and the size of the dendrite arms
基金supported by the National Natural Science Foundation of China(Grant number:50071060)the National Development Project for Basic Scientific Research(Grant number:G2000067201).
文摘The Mg65Cu25Y10 melts were quenched at a temperature of 973 K under various pressures in the range of 2-5 GPa and ambient pressure. The microstructure of the solidified specimens has been investigated by X-ray diffraction, transmission electron microscope and electron probe microanalysis. Experimental results show that the pressure has a great influence on the solidification microstructure of the Mg65Cu25Y10. At ambient pressure, the solidification products are Mg2(Cu,Y) and a very small amount of Y2O3 inclusion. As the pressure is above 2 GPa, a new Cu2(Y,Mg) phase appears, while Y2O3 is not observed at the pressure of 3, 4 and 5 GPa. When the pressure increases from 2 GPa to 5 GPa, the grain sizes of Mg2(Cu,Y) and Cu2(Y,Mg) decrease from 125, 96 nm to 80, 7 nm, respectively. The mechanisms for the effects of the pressure on the phase evolution and microstructure during solidification process of Mg65Cu25Y10 alloy have been discussed.
基金supported by the National Natural Science Foundation of China(Grant Nos.11490560 and 11321064)the National Basic Research Program of China(Grant No.2013CB834406)
文摘Jinping Underground laboratory for Nuclear Astrophysics(JUNA) will take the advantage of the ultra-low background of CJPL lab and high current accelerator based on an ECR source and a highly sensitive detector to directly study for the first time a number of crucial reactions occurring at their relevant stellar energies during the evolution of hydrostatic stars. In its first phase, JUNA aims at the direct measurements of^(25)Mg(p,γ)^(26)Al,^(19)F(p,α)^(16)O,^(13)C(α,n)^(16)O and ^(12)C(α,γ)^(16)O reactions. The experimental setup,which includes an accelerator system with high stability and high intensity, a detector system, and a shielding material with low background, will be established during the above research. The current progress of JUNA will be given.
