There are great challenges for traditional three-dimensional( 3-D) interferometric inverse synthetic aperture radar( In ISAR) imaging algorithms of ship targets w ith 2-D sparsity in actual radar imaging system. To de...There are great challenges for traditional three-dimensional( 3-D) interferometric inverse synthetic aperture radar( In ISAR) imaging algorithms of ship targets w ith 2-D sparsity in actual radar imaging system. To deal w ith this problem,a novel 3-D In ISAR imaging method is proposed in this paper.First,the high-precision gradient adaptive algorithm w as adopted to reconstruct the echoes in range dimension. Then the method of minimizing the entropy of the average range profile w as applied to estimate the parameters w hich are used to compensate translation components of the received echoes. Besides,the phase adjustment and image coregistration of the sparse echoes w ere achieved at the same time through the approach of the joint phase autofocus. Finally,the 3-D geometry coordinates of the ship target w ith 2-D sparsity w ere reconstructed by combining the range measurement and interferometric processing of the ISAR images. Simulation experiments w ere carried out to verify the practicability and effectiveness of the algorithm in the case that the received echoes are in 2-D sparsity.展开更多
A 3-D numerical model for calculating flow in non-curvilinear coordinates was established in this article. The flow was simulated by solving the full Reynolds-averaged Navier-Stokes equations with the RNG κ-ε turbul...A 3-D numerical model for calculating flow in non-curvilinear coordinates was established in this article. The flow was simulated by solving the full Reynolds-averaged Navier-Stokes equations with the RNG κ-ε turbulence model. In the horizontal x-y-plane, a boundary-fitted curvilinear co-ordinate system was adopted, while in the vertical direction, a σ co-ordinate transformation was used to represent the free surface and bed topography. The water level was determined by solving the 2-D Poisson equation derived from 2-D depth averaged momentum equations. The finite-volume method was used to discretize the equations and the SIMPLEC algorithm was applied to acquire the coupling of velocity and pressure. This model was applied to simulate the meandering channels and natural rivers, and the water levels and the velocities for all sections were given. By contrasting and analyzing, the agreement with measurements is generally good. The feasibility studies of simulating flow of the natural fiver have been conducted to demonstrate its applicability to hydraulic engineering research.展开更多
基金Sponsored by the National Natural Science Foundation of China(Grant Nos.61622107 and 61871146)the Fundamental Research Funds for the Central Universities
文摘There are great challenges for traditional three-dimensional( 3-D) interferometric inverse synthetic aperture radar( In ISAR) imaging algorithms of ship targets w ith 2-D sparsity in actual radar imaging system. To deal w ith this problem,a novel 3-D In ISAR imaging method is proposed in this paper.First,the high-precision gradient adaptive algorithm w as adopted to reconstruct the echoes in range dimension. Then the method of minimizing the entropy of the average range profile w as applied to estimate the parameters w hich are used to compensate translation components of the received echoes. Besides,the phase adjustment and image coregistration of the sparse echoes w ere achieved at the same time through the approach of the joint phase autofocus. Finally,the 3-D geometry coordinates of the ship target w ith 2-D sparsity w ere reconstructed by combining the range measurement and interferometric processing of the ISAR images. Simulation experiments w ere carried out to verify the practicability and effectiveness of the algorithm in the case that the received echoes are in 2-D sparsity.
基金the National Basic Research Program of China (973 Program, Grant No. 2006CB403302)the National Natural Science Foundation of China (Grant No.50779006)the Natural Science Foundation of LiaoningProvince (Grant No. 20062170)
文摘A 3-D numerical model for calculating flow in non-curvilinear coordinates was established in this article. The flow was simulated by solving the full Reynolds-averaged Navier-Stokes equations with the RNG κ-ε turbulence model. In the horizontal x-y-plane, a boundary-fitted curvilinear co-ordinate system was adopted, while in the vertical direction, a σ co-ordinate transformation was used to represent the free surface and bed topography. The water level was determined by solving the 2-D Poisson equation derived from 2-D depth averaged momentum equations. The finite-volume method was used to discretize the equations and the SIMPLEC algorithm was applied to acquire the coupling of velocity and pressure. This model was applied to simulate the meandering channels and natural rivers, and the water levels and the velocities for all sections were given. By contrasting and analyzing, the agreement with measurements is generally good. The feasibility studies of simulating flow of the natural fiver have been conducted to demonstrate its applicability to hydraulic engineering research.
