In this study,TiO_(2) nanosheets(NSs)grown in situ on extremely conductive Ti_(3)C_(2)T_(x) MXene to form TiO_(2)/Ti_(3)C_(2)T_(x) MXene composites with abundant active sites are proposed to effectively achieve elec‐...In this study,TiO_(2) nanosheets(NSs)grown in situ on extremely conductive Ti_(3)C_(2)T_(x) MXene to form TiO_(2)/Ti_(3)C_(2)T_(x) MXene composites with abundant active sites are proposed to effectively achieve elec‐trocatalytic NH_(3) synthesis.Electron transfer can be promoted by Ti_(3)C_(2)T_(x) MXene with high conduc‐tivity.Meanwhile,the TiO_(2) NSs in‐situ formation can not only avoid Ti_(3)C_(2)T_(x) MXene microstacking but also enhance the surface specific area of Ti_(3)C_(2)T_(x) MXene.The TiO_(2)/Ti_(3)C_(2)T_(x) MXene catalyst reach‐es a high Faradaic efϐiciency(FE)of 44.68%at−0.75 V vs.RHE and a large NH3 yield of 44.17µg h^(-1) mg^(-1)cat.at−0.95 V,with strong electrochemical durability.15N isotopic labeling experiments imply that the N in the produced NH3 originated from the N2 of the electrolyte.DFT calculations were conducted to determine the possible NRR reaction pathways for TiO_(2)/Ti_(3)C_(2)T_(x) MXene composites.MXene catalysts combined with other materials have been rationally designed for efficient ammonia production under ambient conditions。展开更多
The rapid recombination of photo-generated electron-hole pairs,insufficient active sites,and strong photocorrosion have considerably restricted the practical application of Cd S in photocatalytic fields.Herein,we desi...The rapid recombination of photo-generated electron-hole pairs,insufficient active sites,and strong photocorrosion have considerably restricted the practical application of Cd S in photocatalytic fields.Herein,we designed and constructed a 2D/2D/2D layered heterojunction photocatalyst with cascaded 2D coupling interfaces.Experiments using electron spin resonance spectroscopy,ultraviolet photoelectron spectroscopy,and in-situ irradiation X-ray photoelectron spectroscopy were conducted to confirm the 2D layered CdS/WO_(3) step-scheme(S-scheme)heterojunctions and CdS/MX ohmic junctions.Impressively,it was found that the strong interfacial electric fields in the S-scheme heterojunction photocatalysts could effectively promote spatially directional charge separation and transport between CdS and WO_(3) nanosheets.In addition,2D Ti_(3)C_(2) MXene nanosheets with a smaller work function and excellent metal conductivity when used as a co-catalyst could build ohmic junctions with Cd S nanosheets,thus providing a greater number of electron transfer pathways and hydrogen evolution sites.Results showed that the highest visible-light hydrogen evolution rate of the optimized MX-Cd S/WO_(3) layered multi-heterostructures could reach as high as 27.5 mmol/g/h,which was 11.0 times higher than that of pure CdS nanosheets.Notably,the apparent quantum efficiency reached 12.0% at 450 nm.It is hoped that this study offers a reliable approach for developing multifunctional photocatalysts by integrating S-scheme and ohmic-junction built-in electric fields and rationally designing a 2D/2D interface for efficient light-to-hydrogen fuel production.展开更多
Uncontrollable Li dendrite growth and infinite volume fluctuation during durative plating and stripping process gravely hinder the application of metallic Li electrode in lithium-oxygen batteries.Herein,oxygen vacancy...Uncontrollable Li dendrite growth and infinite volume fluctuation during durative plating and stripping process gravely hinder the application of metallic Li electrode in lithium-oxygen batteries.Herein,oxygen vacancy-rich TiO_(2)(Vo-TiO_(2))nanoparticles(NPs)uniformly dispersing on Ti_(3)C_(2)T_(x)(Vo-TiO_(2)/Ti_(3)C_(2) T_(x))with excellent lithiophilicity feature are presented as effective composite anodes,on which a dense and uniform Li growth behavior is observed.Based on electrochemical studies,mutiphysics simulation and theoretical calculation,it is found that Vo-TiO_(2) coupling with three dimensional(3 D)conductive Ti_(3)C_(2) T_(x) MXene forms highly ordered lithiophilic sites which succeed in guiding Li ions flux and adsorption,thus modulating the uniform Li nucleation and growth.As a result,this composite electrode is capable of preserving Li with high areal capacity of~10 mAh cm^(-2) without the presence of dendrites and large volume expansion.Consequently,the as-prepared Vo-TiO_(2)/Ti_(3)C_(2) T_(x)@Li anode shows outstanding performance including low voltage hysteresis(~19 mV)and superior durability(over 750 h).When assembling with the Vo-TiO_(2)/Ti_(3)C_(2) T_(x)@Li anodes,lithium-oxygen batteries also deliver enhanced cycling stability and improved rate performance.This work demonstrates the effectiveness of oxygen vacancies in guiding Li nucleating and plating behavior at initial stage and brings a promising strategy for promoting the development of advanced Li metal-based batteries.展开更多
Two-dimensional(2D)perovskites solar cells(PSCs)have attracted considerable attention owing to their excellent stability against humidity;however,some imperfectness of 2D perovskites,such as poor crystallinity,disorde...Two-dimensional(2D)perovskites solar cells(PSCs)have attracted considerable attention owing to their excellent stability against humidity;however,some imperfectness of 2D perovskites,such as poor crystallinity,disordered orientation,and inferior charge transport still limit the power conversion efficiency(PCE)of 2D PSCs.In this work,2D Ti3C2Tx MXene nanosheets with high electrical conductivity and mobility were employed as a nanosized additive to prepare 2D Ruddlesden–Popper perovskite films.The PCE of solar cells was increased from 13.69(without additive)to 15.71%after incorporating the Ti_(3)C_(2)T_(x) nanosheets with an optimized concentration.This improved performance is attributed to the enhanced crystallinity,orientation,and passivated trap states in the 3D phase that result in accelerated charge transfer process in vertical direction.More importantly,the unencapsulated cells exhibited excellent stability under ambient conditions with 55±5%relative humidity.展开更多
文摘In this study,TiO_(2) nanosheets(NSs)grown in situ on extremely conductive Ti_(3)C_(2)T_(x) MXene to form TiO_(2)/Ti_(3)C_(2)T_(x) MXene composites with abundant active sites are proposed to effectively achieve elec‐trocatalytic NH_(3) synthesis.Electron transfer can be promoted by Ti_(3)C_(2)T_(x) MXene with high conduc‐tivity.Meanwhile,the TiO_(2) NSs in‐situ formation can not only avoid Ti_(3)C_(2)T_(x) MXene microstacking but also enhance the surface specific area of Ti_(3)C_(2)T_(x) MXene.The TiO_(2)/Ti_(3)C_(2)T_(x) MXene catalyst reach‐es a high Faradaic efϐiciency(FE)of 44.68%at−0.75 V vs.RHE and a large NH3 yield of 44.17µg h^(-1) mg^(-1)cat.at−0.95 V,with strong electrochemical durability.15N isotopic labeling experiments imply that the N in the produced NH3 originated from the N2 of the electrolyte.DFT calculations were conducted to determine the possible NRR reaction pathways for TiO_(2)/Ti_(3)C_(2)T_(x) MXene composites.MXene catalysts combined with other materials have been rationally designed for efficient ammonia production under ambient conditions。
文摘The rapid recombination of photo-generated electron-hole pairs,insufficient active sites,and strong photocorrosion have considerably restricted the practical application of Cd S in photocatalytic fields.Herein,we designed and constructed a 2D/2D/2D layered heterojunction photocatalyst with cascaded 2D coupling interfaces.Experiments using electron spin resonance spectroscopy,ultraviolet photoelectron spectroscopy,and in-situ irradiation X-ray photoelectron spectroscopy were conducted to confirm the 2D layered CdS/WO_(3) step-scheme(S-scheme)heterojunctions and CdS/MX ohmic junctions.Impressively,it was found that the strong interfacial electric fields in the S-scheme heterojunction photocatalysts could effectively promote spatially directional charge separation and transport between CdS and WO_(3) nanosheets.In addition,2D Ti_(3)C_(2) MXene nanosheets with a smaller work function and excellent metal conductivity when used as a co-catalyst could build ohmic junctions with Cd S nanosheets,thus providing a greater number of electron transfer pathways and hydrogen evolution sites.Results showed that the highest visible-light hydrogen evolution rate of the optimized MX-Cd S/WO_(3) layered multi-heterostructures could reach as high as 27.5 mmol/g/h,which was 11.0 times higher than that of pure CdS nanosheets.Notably,the apparent quantum efficiency reached 12.0% at 450 nm.It is hoped that this study offers a reliable approach for developing multifunctional photocatalysts by integrating S-scheme and ohmic-junction built-in electric fields and rationally designing a 2D/2D interface for efficient light-to-hydrogen fuel production.
基金financially supported by the National Natural Science Foundation of China(Grant No.21905033)the Science and Technology Department of Sichuan Province(Grant No.2019YJ0503)the State Key Laboratory of Vanadium and Titanium Resources Comprehensive Utilization(2020P4FZG02A)。
文摘Uncontrollable Li dendrite growth and infinite volume fluctuation during durative plating and stripping process gravely hinder the application of metallic Li electrode in lithium-oxygen batteries.Herein,oxygen vacancy-rich TiO_(2)(Vo-TiO_(2))nanoparticles(NPs)uniformly dispersing on Ti_(3)C_(2)T_(x)(Vo-TiO_(2)/Ti_(3)C_(2) T_(x))with excellent lithiophilicity feature are presented as effective composite anodes,on which a dense and uniform Li growth behavior is observed.Based on electrochemical studies,mutiphysics simulation and theoretical calculation,it is found that Vo-TiO_(2) coupling with three dimensional(3 D)conductive Ti_(3)C_(2) T_(x) MXene forms highly ordered lithiophilic sites which succeed in guiding Li ions flux and adsorption,thus modulating the uniform Li nucleation and growth.As a result,this composite electrode is capable of preserving Li with high areal capacity of~10 mAh cm^(-2) without the presence of dendrites and large volume expansion.Consequently,the as-prepared Vo-TiO_(2)/Ti_(3)C_(2) T_(x)@Li anode shows outstanding performance including low voltage hysteresis(~19 mV)and superior durability(over 750 h).When assembling with the Vo-TiO_(2)/Ti_(3)C_(2) T_(x)@Li anodes,lithium-oxygen batteries also deliver enhanced cycling stability and improved rate performance.This work demonstrates the effectiveness of oxygen vacancies in guiding Li nucleating and plating behavior at initial stage and brings a promising strategy for promoting the development of advanced Li metal-based batteries.
基金the National Natural Science Foundation of China(No.11974129 to X.-F.W.)“the Fundamental Research Funds for the Central Universities,Jilin University.”。
文摘Two-dimensional(2D)perovskites solar cells(PSCs)have attracted considerable attention owing to their excellent stability against humidity;however,some imperfectness of 2D perovskites,such as poor crystallinity,disordered orientation,and inferior charge transport still limit the power conversion efficiency(PCE)of 2D PSCs.In this work,2D Ti3C2Tx MXene nanosheets with high electrical conductivity and mobility were employed as a nanosized additive to prepare 2D Ruddlesden–Popper perovskite films.The PCE of solar cells was increased from 13.69(without additive)to 15.71%after incorporating the Ti_(3)C_(2)T_(x) nanosheets with an optimized concentration.This improved performance is attributed to the enhanced crystallinity,orientation,and passivated trap states in the 3D phase that result in accelerated charge transfer process in vertical direction.More importantly,the unencapsulated cells exhibited excellent stability under ambient conditions with 55±5%relative humidity.
