The graded AlGaN:Si back barrier can form the majority of three-dimensional electron gases(3DEGs)at the GaN/graded AlGaN:Si heterostructure and create a composite two-dimensional(2D)-three-dimensional(3D)channel in Al...The graded AlGaN:Si back barrier can form the majority of three-dimensional electron gases(3DEGs)at the GaN/graded AlGaN:Si heterostructure and create a composite two-dimensional(2D)-three-dimensional(3D)channel in AlGaN/GaN/graded-AlGaN:Si/GaN:C heterostructure(DH:Si/C).Frequency-dependent capacitances and conductance are measured to investigate the characteristics of the multi-temperature trap states of in DH:Si/C and AlGaN/GaN/GaN:C heterostructure(SH:C).There are fast,medium,and slow trap states in DH:Si/C,while only medium trap states exist in SH:C.The time constant/trap density for medium trap state in SH:C heterostructure are(11μs-17.7μs)/(1.1×10^13 cm^-2·eV^-1-3.9×10^13 cm^-2·eV^-1)and(8.7μs-14.1μs)/(0.7×10^13 cm^-2·eV^-1-1.9×10^13 cm^-2·eV^-1)at 300 K and 500 K respectively.The time constant/trap density for fast,medium,and slow trap states in DH:Si/C heterostructure are(4.2μs-7.7μs)/(1.5×10^13 cm^-2·eV^-1-3.2×10^13 cm^-2·eV^-1),(6.8μs-11.8μs)/(0.8×10^13 cm^-2·eV^-1-2.8×10^13 cm^-2·eV^-1),(30.1μs-151μs)/(7.5×10^12 cm^-2·eV^-1-7.8×10^12 cm^-2·eV^-1)at 300 K and(3.5μs-6.5μs)/(0.9×10^13 cm^-2·eV^-1-1.8×10^13 cm^-2·eV^-1),(4.9μs-9.4μs)/(0.6×10^13 cm^-2·eV^-1-1.7×10^13 cm^-2·eV^-1),(20.6μs-61.9μs)/(3.2×10^12 cm^-2·eV^-1-3.5×10^12 cm^-2·eV^-1)at 500 K,respectively.The DH:Si/C structure can effectively reduce the density of medium trap states compared with SH:C structure.展开更多
Ceramic matrix composite(CMC)and superalloy bolted joints are commonly used high temperature connection structures in aerospace and aeronautical fields.In this paper,a finite element model coupled with progressive dam...Ceramic matrix composite(CMC)and superalloy bolted joints are commonly used high temperature connection structures in aerospace and aeronautical fields.In this paper,a finite element model coupled with progressive damage analysis of 2D C/SiC composites and superalloy bolted joint was implemented to simulate the uniaxial tensile loading process by using the ABAQUS finite element software.The parametric effects of raised head bolt on stress distribution,tensile performance,and damage process were studied for the CMC⁃superalloy bolted joint structures.The results showed that the final failure load increased first to the maximum value,and then decreased with the rise of bolt diameter,bolt head diameter,and bolt head thickness,respectively.When the three parameters were 5.0 mm,9.5 mm,and 2.8 mm for the current studied bolt configuration,the joint structure gave the maximum load bearing capacity for the considered parameter ranges.It was also found that around 42%potential improvement in load bearing capacity could be achieved by very small adjustments in bolt parameters of the joints.展开更多
In-situ ZrB2/AZ91D magnesium matrix composite was successfully synthesized with Al/K2ZrF6+NH4BF4 by means of Direct Melt Reaction.The fabricated ZrB2/AZ91D magnesium matrix composite through direct melt mixing method ...In-situ ZrB2/AZ91D magnesium matrix composite was successfully synthesized with Al/K2ZrF6+NH4BF4 by means of Direct Melt Reaction.The fabricated ZrB2/AZ91D magnesium matrix composite through direct melt mixing method was investigated.Results from X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDS) confirmed the existence of ZrB2 particles in the AZ91D alloy,and most ZrB2 particles were in the size range of just several microns,some even to 100 nm.The cast specimens were studied through corrosion testing and heat treatment.The average grain size of AZ91D decreased markedly from about 250μm to 50μm.In addition,the shape and size of the β-Mg17Al12 phase as well as the morphologies of primary α-Mg in the magnesium matrix composite were greatly changed.The network structure of the β-Mg17Al12 phase was broken into small blocks and the size of α-Mg decreased significantly.展开更多
To consider fiber random distribution at the microscale for the multiscale model based on the micro-mechanics failure(MMF)theory,clustering method is used for the extraction of amplification factors.As the clustering ...To consider fiber random distribution at the microscale for the multiscale model based on the micro-mechanics failure(MMF)theory,clustering method is used for the extraction of amplification factors.As the clustering method is a kind of unsupervised machine learning method,the elements with similar mechanical behavior under external loading can be included in a cluster automatically at the microscale.With this modification,the fiber random distribution model can be used for multiscale damage analysis in the framework of MMF theory.To validate the modified multiscale analysis method,progressive damage analysis of a kind of 2D twill woven composites is conducted based on different microscale models.The stress values for microscale models with fiber hexagonal and random distribution patterns are compared first.Much higher stress concentration is generated in the fiber random distribution model due to the smaller inter-fiber distance especially under longitudinal shear loading.The obtained cluster distribution results exhibit the characters of the stress distribution in the two microscale models.Thereafter,tensile and compressive responses of the 2D twill woven composite are predicted with the modified multiscale analysis method and accuracy of the method is verified through comparison with published experimental results.From the simulation results,it can be found that the matrix damage initiation from the model based on the fiber random distribution model is premature compared with that from the model based on the fiber hexagonal distribution model.Besides,under tensile loading,the damage all initiates from the fill tows and propagates to the wrap tows.However,under compressive loading,the matrix damage initiates from the wrap tows in the model based on the fiber random distribution model.展开更多
Here,silica microspheres were decorated with two-dimensional metal-organic frameworks(2 D MOFs)nanosheets and ionic liquids,and evaluated as the mixed-mode stationary phase for chromatographic separation.The ionic liq...Here,silica microspheres were decorated with two-dimensional metal-organic frameworks(2 D MOFs)nanosheets and ionic liquids,and evaluated as the mixed-mode stationary phase for chromatographic separation.The ionic liquids were used to assist the synthesis of 2 D MOFs nanosheets,and also acted as adhesives among the nanosheets and silica.In contrast with the 2 D MOFs-based column without ionic liquids and commercial columns,the prepared column exhibited enhanced chromatographic separation performance for partially hydrophilic compounds such as alkaloids,sulfonamides and antibiotics,etc.In addition to excellent chromatographic repeatability and stability,it has also been verified that the composites could be easily and repeatedly prepared.The relative standard deviation of the retention time of the same type of analyte between the three batches of materials was ranging from 0.21%to 1.7%.In short,these results indicated that the synthesized composites were promising separation material for liquid chromatography,which made it possible to broaden the application of 2 D MOFs in the field of chromatography.展开更多
Molybdenum disulfide(MoS_(2))-based nanostructures are highly desirable for applications such as chemical and biological sensing,photo/electrochemical catalysis,and energy storage due to their unique physical and chem...Molybdenum disulfide(MoS_(2))-based nanostructures are highly desirable for applications such as chemical and biological sensing,photo/electrochemical catalysis,and energy storage due to their unique physical and chemical properties.In this work,MoS_(2)core-shell nanoparticles were first prepared through the liquid-phase processing of bulk MoS2by a femtosecond laser.The core of prepared nanoparticles was incompletely and weakly crystalline MoS_(2);the shell of prepared nanoparticles was highly crystalline MoS_(2),which wrapped around the core layer by layer.The femtosecond laser simultaneously achieved liquid-phase ablation and light exfoliation.The formation mechanism of the core-shell nanoparticles is to prepare the nanonuclei first by laser liquid-phase ablation and then the nanosheets by light exfoliation;the nanosheets will wrap the nanonuclei layer by layer through van der Waals forces to form core-shell nanoparticles.The MoS_(2)core-shell nanoparticles,because of Mo-S bond breakage and recombination,have high chemical activity for chemical catalysis.Afterward,the nanoparticles were used as a reducing agent to directly prepare three-dimensional(3D)Au-MoS_(2)micro/nanostructures,which were applied as surface-enhanced Raman spectroscopy(SERS)substrates to explore chemical sensing activity.The ultrahigh enhancement factor(1.06×10^(11)),ultralow detection limit(10-13M),and good SERS adaptability demonstrate highly sensitive SERS activity,great ability of ultralow concentration detection,and ability to detect diverse analytes,respectively.This work reveals the tremendous potential of 3D Au-MoS_(2)composite structures as excellent SERS substrates for chemical and biological sensing.展开更多
基金the National Key Research and Development Program of China(Grant No.2018YFB1802100)the Natural Science Foundation of Shaanxi Province,China(Grant Nos.2020JM-191 and 2018HJCG-20)+2 种基金the National Natural Science Foundation of China(Grant Nos.61904135,61704124,and 61534007)the China Postdoctoral Science Foundation(Grant Nos.2018M640957 and 2019M663930XB)the Wuhu and Xidian University Special Fund for Industry-University-Research Cooperation,China(Grant No.XWYCXY-012019007).
文摘The graded AlGaN:Si back barrier can form the majority of three-dimensional electron gases(3DEGs)at the GaN/graded AlGaN:Si heterostructure and create a composite two-dimensional(2D)-three-dimensional(3D)channel in AlGaN/GaN/graded-AlGaN:Si/GaN:C heterostructure(DH:Si/C).Frequency-dependent capacitances and conductance are measured to investigate the characteristics of the multi-temperature trap states of in DH:Si/C and AlGaN/GaN/GaN:C heterostructure(SH:C).There are fast,medium,and slow trap states in DH:Si/C,while only medium trap states exist in SH:C.The time constant/trap density for medium trap state in SH:C heterostructure are(11μs-17.7μs)/(1.1×10^13 cm^-2·eV^-1-3.9×10^13 cm^-2·eV^-1)and(8.7μs-14.1μs)/(0.7×10^13 cm^-2·eV^-1-1.9×10^13 cm^-2·eV^-1)at 300 K and 500 K respectively.The time constant/trap density for fast,medium,and slow trap states in DH:Si/C heterostructure are(4.2μs-7.7μs)/(1.5×10^13 cm^-2·eV^-1-3.2×10^13 cm^-2·eV^-1),(6.8μs-11.8μs)/(0.8×10^13 cm^-2·eV^-1-2.8×10^13 cm^-2·eV^-1),(30.1μs-151μs)/(7.5×10^12 cm^-2·eV^-1-7.8×10^12 cm^-2·eV^-1)at 300 K and(3.5μs-6.5μs)/(0.9×10^13 cm^-2·eV^-1-1.8×10^13 cm^-2·eV^-1),(4.9μs-9.4μs)/(0.6×10^13 cm^-2·eV^-1-1.7×10^13 cm^-2·eV^-1),(20.6μs-61.9μs)/(3.2×10^12 cm^-2·eV^-1-3.5×10^12 cm^-2·eV^-1)at 500 K,respectively.The DH:Si/C structure can effectively reduce the density of medium trap states compared with SH:C structure.
基金Sponsored by the Pre⁃Research Foundation of Shenyang Aircraft Design and Research Institute,Aviation Industry Corporation of China(Grant No.JH20128255).
文摘Ceramic matrix composite(CMC)and superalloy bolted joints are commonly used high temperature connection structures in aerospace and aeronautical fields.In this paper,a finite element model coupled with progressive damage analysis of 2D C/SiC composites and superalloy bolted joint was implemented to simulate the uniaxial tensile loading process by using the ABAQUS finite element software.The parametric effects of raised head bolt on stress distribution,tensile performance,and damage process were studied for the CMC⁃superalloy bolted joint structures.The results showed that the final failure load increased first to the maximum value,and then decreased with the rise of bolt diameter,bolt head diameter,and bolt head thickness,respectively.When the three parameters were 5.0 mm,9.5 mm,and 2.8 mm for the current studied bolt configuration,the joint structure gave the maximum load bearing capacity for the considered parameter ranges.It was also found that around 42%potential improvement in load bearing capacity could be achieved by very small adjustments in bolt parameters of the joints.
基金financially supported by the Specialized Research Fund Project for the Doctoral Program of Higher Education of China (No.20070299004)the Jiangsu Higher Education Institutions Natural Science Foundation Research Program (No.10KJD430003)+2 种基金the Jiangsu University Outstanding Talents Building Project (No.1213000004)the Jiangsu University Undergraduate Practice-Innovation Training Project (No.1201220038)Doctoral Foundation of Jiangsu University (No.1281220014)
文摘In-situ ZrB2/AZ91D magnesium matrix composite was successfully synthesized with Al/K2ZrF6+NH4BF4 by means of Direct Melt Reaction.The fabricated ZrB2/AZ91D magnesium matrix composite through direct melt mixing method was investigated.Results from X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDS) confirmed the existence of ZrB2 particles in the AZ91D alloy,and most ZrB2 particles were in the size range of just several microns,some even to 100 nm.The cast specimens were studied through corrosion testing and heat treatment.The average grain size of AZ91D decreased markedly from about 250μm to 50μm.In addition,the shape and size of the β-Mg17Al12 phase as well as the morphologies of primary α-Mg in the magnesium matrix composite were greatly changed.The network structure of the β-Mg17Al12 phase was broken into small blocks and the size of α-Mg decreased significantly.
基金the support of the National Natural Science Foundation of China(No.11572086)the Fundamental Research Funds for the Central Universities+2 种基金the Scientific Research Innovation Program of Jiangsu Province College of China(No.KYLX16_0185)the Scientific Research Foundation of Graduate School of Southeast University of China(No.YBJJ1760)the China Scholarship Council of China(No.201706090076)。
文摘To consider fiber random distribution at the microscale for the multiscale model based on the micro-mechanics failure(MMF)theory,clustering method is used for the extraction of amplification factors.As the clustering method is a kind of unsupervised machine learning method,the elements with similar mechanical behavior under external loading can be included in a cluster automatically at the microscale.With this modification,the fiber random distribution model can be used for multiscale damage analysis in the framework of MMF theory.To validate the modified multiscale analysis method,progressive damage analysis of a kind of 2D twill woven composites is conducted based on different microscale models.The stress values for microscale models with fiber hexagonal and random distribution patterns are compared first.Much higher stress concentration is generated in the fiber random distribution model due to the smaller inter-fiber distance especially under longitudinal shear loading.The obtained cluster distribution results exhibit the characters of the stress distribution in the two microscale models.Thereafter,tensile and compressive responses of the 2D twill woven composite are predicted with the modified multiscale analysis method and accuracy of the method is verified through comparison with published experimental results.From the simulation results,it can be found that the matrix damage initiation from the model based on the fiber random distribution model is premature compared with that from the model based on the fiber hexagonal distribution model.Besides,under tensile loading,the damage all initiates from the fill tows and propagates to the wrap tows.However,under compressive loading,the matrix damage initiates from the wrap tows in the model based on the fiber random distribution model.
基金supported by the National Natural Science Foundation of China(Nos.21575149,21575148)the State Key Scientific Special Project(No.2016ZX05011-003)。
文摘Here,silica microspheres were decorated with two-dimensional metal-organic frameworks(2 D MOFs)nanosheets and ionic liquids,and evaluated as the mixed-mode stationary phase for chromatographic separation.The ionic liquids were used to assist the synthesis of 2 D MOFs nanosheets,and also acted as adhesives among the nanosheets and silica.In contrast with the 2 D MOFs-based column without ionic liquids and commercial columns,the prepared column exhibited enhanced chromatographic separation performance for partially hydrophilic compounds such as alkaloids,sulfonamides and antibiotics,etc.In addition to excellent chromatographic repeatability and stability,it has also been verified that the composites could be easily and repeatedly prepared.The relative standard deviation of the retention time of the same type of analyte between the three batches of materials was ranging from 0.21%to 1.7%.In short,these results indicated that the synthesized composites were promising separation material for liquid chromatography,which made it possible to broaden the application of 2 D MOFs in the field of chromatography.
基金supported by the National Natural Science Foundation of China(Grant Nos.52105427,U2037205,52005041,51575053,and 51775047)Research Foundation from Ministry of Education of China(Grant No.6141A02033123)+2 种基金Beijing Municipal Commission of Education(Grant No.KM201910005003)Knowledge Innovation Program of Wuhan-Basic Research(Grant No.2022010801010349)Scientific Research Project of Hubei Provincial Department of Education(Grant No.B2022055)。
文摘Molybdenum disulfide(MoS_(2))-based nanostructures are highly desirable for applications such as chemical and biological sensing,photo/electrochemical catalysis,and energy storage due to their unique physical and chemical properties.In this work,MoS_(2)core-shell nanoparticles were first prepared through the liquid-phase processing of bulk MoS2by a femtosecond laser.The core of prepared nanoparticles was incompletely and weakly crystalline MoS_(2);the shell of prepared nanoparticles was highly crystalline MoS_(2),which wrapped around the core layer by layer.The femtosecond laser simultaneously achieved liquid-phase ablation and light exfoliation.The formation mechanism of the core-shell nanoparticles is to prepare the nanonuclei first by laser liquid-phase ablation and then the nanosheets by light exfoliation;the nanosheets will wrap the nanonuclei layer by layer through van der Waals forces to form core-shell nanoparticles.The MoS_(2)core-shell nanoparticles,because of Mo-S bond breakage and recombination,have high chemical activity for chemical catalysis.Afterward,the nanoparticles were used as a reducing agent to directly prepare three-dimensional(3D)Au-MoS_(2)micro/nanostructures,which were applied as surface-enhanced Raman spectroscopy(SERS)substrates to explore chemical sensing activity.The ultrahigh enhancement factor(1.06×10^(11)),ultralow detection limit(10-13M),and good SERS adaptability demonstrate highly sensitive SERS activity,great ability of ultralow concentration detection,and ability to detect diverse analytes,respectively.This work reveals the tremendous potential of 3D Au-MoS_(2)composite structures as excellent SERS substrates for chemical and biological sensing.