2-D Modeling and Calculations of Stratospheric Ozone and Influences of Convection, Diffusion, and Time

An engineering system approach of 2-D cylindrical model of transient mass balance calculations of ozone and other concerned chemicals along with fourteen photolysis, ozone-generating and ozone-depleting chemical reaction equations was developed, validated, and used for studying the ozone concentrations, distribution and peak of the layer, ozone depletion and total ozone abundance in the stratosphere. The calculated ozone concentrations and profile at both the Equator and a 60˚N location were found to follow closely with the measured data. The calculated average ozone concentration was within 1% of the measured average, and the deviation of ozone profiles was within 14%. The monthly evolution of stratospheric ozone concentrations and distribution above the Equator was studied with results discussed in details. The influences of slow air movement in both altitudinal and radial directions on ozone concentrations and profile in the stratosphere were explored and discussed. Parametric studies of the influences of gas diffusivities of ozone DO3 and active atomic oxygen DO on ozone concentrations and distributions were also studied and delineated. Having both influences through physical diffusion and chemical reactions, the diffusivity (and diffusion) of atomic oxygen DO was found to be more sensitive and important than that of ozone DO3 on ozone concentrations and distribution. The 2-D ozone model present in this paper for stratospheric ozone and its layer and depletion is shown to be robust, convenient, efficient, and executable for analyzing the complex ozone phenomena in the stratosphere. .

Numerical three-dimensional modeling of earthen dam piping failure

A physically-based numerical three-dimensional earthen dam piping failure model is developed for homogeneous and zoned soil dams.This model is an erosion model,coupled with force/moment equilibrium analyses.Orifice flow and two-dimensional(2D)shallow water equations(SWE)are solved to simulate dam break flows at different breaching stages.Erosion rates of different soils with different construction compaction efforts are calculated using corresponding erosion formulae.The dam's real shape,soil properties,and surrounding area are programmed.Large outer 2D-SWE grids are used to control upstream and downstream hydraulic conditions and control the boundary conditions of orifice flow,and inner 2D-SWE flow is used to scour soil and perform force/moment equilibrium analyses.This model is validated using the European Commission IMPACT(Investigation of Extreme Flood Processes and Uncertainty)Test#5 in Norway,Teton Dam failure in Idaho,USA,and Quail Creek Dike failure in Utah,USA.All calculated peak outflows are within 10%errors of observed values.Simulation results show that,for a V-shaped dam like Teton Dam,a piping breach location at the abutment tends to result in a smaller peak breach outflow than the piping breach location at the dam's center;and if Teton Dam had broken from its center for internal erosion,a peak outflow of 117851 m'/s,which is 81%larger than the peak outflow of 65120 m3/s released from its right abutment,would have been released from Teton Dam.A lower piping inlet elevation tends to cause a faster/earlier piping breach than a higher piping inlet elevation.

长三角D-2日电能量市场机制设计

立足于我国多层次市场体系建设现状和国、网、省三级调度业务架构,界定现阶段区域内省间市场和跨区省间市场在全国统一电力市场中的功能定位。为了解决不同范围、不同周期市场的衔接问题,提出建设长三角D-2日电能量市场,通过D-2日电能量市场统筹全网电力电量平衡,保障区外送电计划的可执行性,实现市场从中长期到日前的平滑过渡。引入市场用户报量报价参与区域市场;设计市场衔接、市场定价、偏差处理等关键机制;考虑到华东电网是耦合关系复杂的交流电网,构建全网络出清模型。算例结果表明,D-2日电能量市场有利于全网资源优化配置,保障全网电力安全以及解决发电侧市场力问题,证明了市场机制设计的有效性。

Multi-dimensional Simulation of Phase Change by a 0D-2D Model Coupling via Stefan Condition

Considering phase changes associated with a high-temperature molten material cooled down from the outside,this work presents an improvement of the modelling and the numerical simulation of such processes for an application pertaining to the safety of light water nuclear reactors.Postulating a core meltdown accident,the behaviour of the core melt(aka corium)into a steel vessel is of tremendous importance when evaluating the vessel integrity.Evaluating correctly the heat fluxes requires the numerical simulation of the interaction between the liquid material and its solid counterpart which forms during the solidification process,but also may melt back.To simulate this configuration,encoun-tered in various industrial applications,one considers a bi-phase model constituted by a liquid phase in contact and interaction with its solid phase.The liquid phase may solidify in presence of low energetic source,while the solid phase may melt due to an intense heat flux from the high-temperature liquid.In the frame of the in-house legacy code,several simplifying assumptions(0D multi-layer discretization,instantaneous heat transfer via a quadratic temperature profile in solids)are made for the modelling of such phase changes.In the present work,these shortcomings are illustrated and further overcome by solving a 2D heat conduction model in the solid by a mixed Raviart-Thomas finite element method coupled to the liquid phase due to heat and mass exchanges through Stefan condition.The liquid phase is modeled with a 0D multi-layer approach.The 0D-liquid and 2D-solid mod-els are coupled by a Stefan like phase change interface model.Several sanity checks are performed to assess the validity of the approach on 1D and 2D academical configurations for which exact or reference solutions are available.Then more advanced situations(genu-ine multi-dimensional phase changes and an"industrial-like scenario")are simulated to verify the appropriate behavior of the obtained coupled simulation scheme.

A Survey on Deep Learning-Based 2D Human Pose Estimation Models

In this article,a comprehensive survey of deep learning-based(DLbased)human pose estimation(HPE)that can help researchers in the domain of computer vision is presented.HPE is among the fastest-growing research domains of computer vision and is used in solving several problems for human endeavours.After the detailed introduction,three different human body modes followed by the main stages of HPE and two pipelines of twodimensional(2D)HPE are presented.The details of the four components of HPE are also presented.The keypoints output format of two popular 2D HPE datasets and the most cited DL-based HPE articles from the year of breakthrough are both shown in tabular form.This study intends to highlight the limitations of published reviews and surveys respecting presenting a systematic review of the current DL-based solution to the 2D HPE model.Furthermore,a detailed and meaningful survey that will guide new and existing researchers on DL-based 2D HPE models is achieved.Finally,some future research directions in the field of HPE,such as limited data on disabled persons and multi-training DL-based models,are revealed to encourage researchers and promote the growth of HPE research.

基于Working Model 2D运动仿真的机构设计

介绍了基于Working Model 2D运动仿真的机构设计。该文利用该软件对四杆机构进行运动仿真和运动分析,结合Excel实现凸轮机构的凸轮轮廓线的设计并作运动仿真。此软件简单易学,仿真过程形象直观,为机构设计提供了一个极好的工具。

Influence of formation heterogeneity on foam flooding performance using 2D and 3D models:an experimental study

The formation heterogeneity is considered as one of the major factors limiting the application of foam flooding.In this paper,influences of formation properties,such as permeability,permeability distribution,interlayer,sedimentary rhythm and 3D heterogeneity,on the mobility control capability and oil displacement efficiency of foam flooding,were systematically investigated using 2D homogeneous and 2D/3D heterogeneous models under 120°C and salinity of 20×10~4 mg/L.The flow resistance of foam was promoted as the permeability increased,which thus resulted in a considerable oil recovery behavior.In the scenario of the vertical heterogeneous formations,it was observed that the permeability of the high-permeable layer was crucial to foam mobility control,and the positive rhythm appeared favorable to improve the foam flooding performance.The additional oil recovery increased to about 40%.The interlayer was favorable for the increases in mobility reduction factor and oil recovery of foam flooding when the low permeability ratio was involved.For the 3D heterogeneous formations,foam could efficiently adjust the areal and vertical heterogeneity through mobility control and gravity segregation,and thus enhancing the oil recovery to 11%–14%.The results derived from this work may provide some insight for the field test designs of foam flooding.

Deep learning-based activity recognition and fine motor identification using 2D skeletons of cynomolgus monkeys

Video-based action recognition is becoming a vital tool in clinical research and neuroscientific study for disorder detection and prediction.However,action recognition currently used in non-human primate(NHP)research relies heavily on intense manual labor and lacks standardized assessment.In this work,we established two standard benchmark datasets of NHPs in the laboratory:Monkeyin Lab(Mi L),which includes 13 categories of actions and postures,and MiL2D,which includes sequences of two-dimensional(2D)skeleton features.Furthermore,based on recent methodological advances in deep learning and skeleton visualization,we introduced the Monkey Monitor Kit(Mon Kit)toolbox for automatic action recognition,posture estimation,and identification of fine motor activity in monkeys.Using the datasets and Mon Kit,we evaluated the daily behaviors of wild-type cynomolgus monkeys within their home cages and experimental environments and compared these observations with the behaviors exhibited by cynomolgus monkeys possessing mutations in the MECP2 gene as a disease model of Rett syndrome(RTT).Mon Kit was used to assess motor function,stereotyped behaviors,and depressive phenotypes,with the outcomes compared with human manual detection.Mon Kit established consistent criteria for identifying behavior in NHPs with high accuracy and efficiency,thus providing a novel and comprehensive tool for assessing phenotypic behavior in monkeys.

Modeling cell contractility responses to acoustic tweezing cytometry

Acoustic tweezing cytometry(ATC)is a recently developed method for cell mechanics regulation.Tar-geted microbubbles,which are attached to integrins and subsequently the actin cytoskeleton,anchor,amplify and transmit the mechanical energy in an acoustic field inside the cells,eliciting prominent cy-toskeleton contractile force increases in various cell types.We propose that a mechanochemical con-version mechanism is critical for the high efficiency of ATC to activate cell contractility responses.Our models predict key experimental observations.Moreover,we study the influences of ATC parameters(ul-trasound center frequency,pulse repetition frequency,duty cycle,and acoustic pressure),cell areas,the number of ATC stimuli,and extracellular matrix rigidity on cell contractility responses to ATC.The simu-lation results suggest that it is large molecules,rather than small ions,that facilitate global responses to the local ATC stimulation,and the incorporation of visible stress fiber bundles improves the accuracy of modeling.

Debris flow simulation 2D(DFS 2D):Numerical modelling of debris flows and calibration of friction parameters

Debris flows are rapid mass movements with a mixture of rock,soil and water.High-intensity rainfall events have triggered multiple debris flows around the globe,making it an important concern from the disaster management perspective.This study presents a numerical model called debris flow simulation 2D(DFS 2D)and applicability of the proposed model is investigated through the values of the model parameters used for the reproduction of an occurred debris flow at Yindongzi gully in China on 13 August 2010.The model can be used to simulate debris flows using three different rheologies and has a userfriendly interface for providing the inputs.Using DFS 2D,flow parameters can be estimated with respect to space and time.The values of the flow resistance parameters of model,dry-Coulomb and turbulent friction,were calibrated through the back analysis and the values obtained are 0.1 and 1000 m/s^(2),respectively.Two new methods of calibration are proposed in this study,considering the crosssectional area of flow and topographical changes induced by the debris flow.The proposed methods of calibration provide an effective solution to the cumulative errors induced by coarse-resolution digital elevation models(DEMs)in numerical modelling of debris flows.The statistical indices such as Willmott's index of agreement,mean-absolute-error,and normalized-root-mean-square-error of the calibrated model are 0.5,1.02 and 1.44,respectively.The comparison between simulated and observed values of topographic changes indicates that DFS 2D provides satisfactory results and can be used for dynamic modelling of debris flows.

Assessing the host genetic background effects on type 2 diabetes and obesity development in response to mixed–oral bacteria and high-fat diet using the collaborative cross mouse model

Background: Host genetic background and sex, play central roles in defining the pathogenesis of type 2 diabetes(T2 D), obesity and infectious diseases. Our previous studies demonstrated the utilization of genetically highly diverse inbred mouse lines, namely collaborative cross(CC), for dissecting host susceptibility for the development of T2 D and obesity, showing significant variations following high-fat(42% fat) diet(HFD). Here, we aimed to assessing the host genetic background and sex effects on T2 D and obesity development in response to oral-mixed bacterial infection and HFD using the CC lines.Materials and Methods: Study cohort consists of 97 mice from 2 CC lines(both sexes), maintained on either HFD or Standard diet(CHD) for 12 weeks. At week 5 a group of mice from each diet were infected with Porphyromonas gingivalis(Pg) and Fusobacterium nucleatum(Fn) bacteria(control groups without infection). Body weight(BW) and glucose tolerance ability were assessed at the end time point of the experiment.Results: The CC lines varied(P <.05) at their BW gain and glucose tolerance ability(with sex effect) in response to diets and/or infection, showing opposite responses despite sharing the same environmental conditions. The combination of diet and infection enhances BW accumulation for IL1912, while restraints it for IL72. As for glucose tolerance ability, only females(both lines) were deteriorated in response to infection.Conclusions: This study emphasizes the power of the CC mouse population for the characterization of host genetic makeup for defining the susceptibility of the individual to development of obesity and/or impaired glucose tolerance.

A Study of Prospective Barriers,Benefits and Measures for Building Information Modeling(BIM)Adoption in Nepalese AEC Industry

The construction industry needs modern construction methodology and technology to improve sustainability and production performance.Building Information Modelling(BIM)technology supports improving the quality of products by reducing design and construction defects,risks to the health and safety of workers,and reduce overall project cost and delivery time.The BIM has capabilities,but it is still undiscovered and unable to exploit the full scale of its benefits in the Architectural Engineering and Construction(AEC)industry.There is a trend to adopt the BIM level 1,which is limited to 2D and only in a few cases 3D models uses in the design and construction of residential and commercial buildings,particularly in Nepal.Hence,this paper focuses on providing insight into the BIM benefits and identifies the potential barriers while adopting BIM Level 3 in Nepal.This was accomplished by developing a 4DBIM model of a multi-story residential building in Nepal and conducting the industry survey via focus group with the AEC professionals based on the developed 4DBIM model.A comprehensive literature review was conducted and presented the findings of the BIM benefits and barriers while adopting BIM.The study found that commercial and governmental projects can immediately be adopted BIM technology.It is concluded that the unavailability of skilled BIM users and the lack of proper policies for BIM adoption are key barriers in Nepal.Hence,the new policy is required to achieve and exploit the full scale of the BIM benefits and improve the project delivery in terms of quality,cost and time including the health and safety of workers and the sustainability of the AEC industry.

A Numerical Simulation of Air Flow in the Human Respiratory System Based on Lung Model

The lung is an important organ that takes part in the gas exchange process. In the study of gas transport and exchange in the human respiratory system, the complicated process of advection and diffusion (AD) in airways of human lungs is considered. The basis of a lumped parameter model or a transport equation is modeled during the inspiration process, when oxygen enters into the human lung channel. The quantitative measurements of oxygen are detached and the model equation is solved numerically by explicit finite difference schemes. Numerical simulations were made for natural breathing conditions or normal breathing conditions. The respiratory flow results for the resting conditions are found strongly dependent on the AD effect with some contribution of the unsteadiness effect. The contour of the flow rate region is labeled and AD effects are compared with the variation of small intervals of time for a constant velocity when breathing is interrupted for a negligible moment.

Kalman Filter for Generalized 2-D Roesser Models

The design problem of the state filter for the generalized stochastic 2-D Roesser models, which appears when both the state and measurement are simultaneously subjected to the interference from white noise, is discussed. The well-known Kalman filter design is extended to the generalized 2-D Roesser models. Based on the method of “scanning line by line”,the filtering problem of generalized 2-D Roesser models with mode-energy reconstruction is solved. The formula of the optimal filtering, which minimizes the variance of the estimation error of the state vectors, is derived. The validity of the designed filter is verified by the calculation steps and the examples are introduced.

An Implicit Coupled 1D/2D Model for Unsteady Subcritical Flow in Channel Networks and Embayment

In this study, 1D and 2D shallow-water models were coupled to simulate unsteady flow in channel networks and embayment. The 1D model solved the 1D shallow-water equations (St. Venant) using the Preissmann box method and targeted long narrow reaches of the river networks, while the 2D model targeted broad channels and embayment and solved the 2D shallow-water equations using a semi-implicit scheme applied to an unstructured grid of triangular cells. The 1D and 2D models were solved simultaneously by building a matrix for the free surface elevation at every 1D junction and 2D cell center. Velocities were then computed explicitly based on the results at the previous time step and the updated water level. The originality of the scheme arose from a novel coupling method. The results showed that the coupled 1D/2D model produced identical results as the full 2D model in classical to benchmark problems with considerable savings in computational effort. Application of the model to the Pearl River Estuary in southern China showed that complex patterns of tidal wave propagation could be efficiently modeled.

Analytical Modelling and Experiment of Novel Rotary Electro-Mechanical Converter with Negative Feedback Mechanism for 2D Valve

The manufacturing of spiral groove structure of two-dimensional valve(2D valve)feedback mechanism has shortcomings of both high cost and time-consuming.This paper presents a novel configuration of rotary electro-mechanical converter with negative feedback mechanism(REMC-NFM)in order to replace the feedback mechanism of spiral groove and thus reduce cost of valve manufacturing.In order to rapidly and quantitative evaluate the driving and feedback performance of the REMC-NFM,an analytical model taking leakage flux,edge effect and permeability nonlinearity into account is formulated based on the equivalent magnetic circuit approach.Then the model is properly simplified in order to obtain the optimal pitch angle.FEM simulation is used to study the influence of crucial parameters on the performance of REMC-NFM.A prototype of REMC-NFM is designed and machined,and an exclusive experimental platform is built.The torque-angle characteristics,torque-displacement characteristics,and magnetic flux density in the working air gap with different excitation currents are measured.The experimental results are in good agreement with the analytical and FEM simulated results,which verifies the correctness of the analytical model.For torque-angle characteristics,the overall torque increases with both current and rotation angle,which reaches about 0.48 N·m with 1.5 A and 1.5°.While for torque-displacement characteristics,the overall torque increases with current yet decrease with armature displacement due to the negative feedback mechanism,which is about 0.16 N·m with 1.5 A and 0.8 mm.Besides,experimental results of conventional torque motor are compared with counterparts of REMC-NFM in order to validate the simplified model.The research indicates that the REMC-NFM can be potentially used as the electro-mechanical converter for 2D valves in civil servo areas.

2D Coupled 3D:A New Numerical Model for Dual - Structured - Aquifer System

This paper points out that a successful numerical simulation is to construct a correct conceptional model which is very dose to the natural condition. A new model, two dimensional coupled three dimensional model (2D -3D ) is presented in the Present paper,which is the most suitable one for the dual - structured - aquifer system. An example of Wenyinghu area is shown.By using the 2D-3D model, a satisfied result of the simulated area is achieved.

A study on Parallel Computation Based on Finite Element Forward Modeling of 2D Magnetotelluric

Magnetotelluric sounding method based on the difference of the rock’s resistivity is an exploration method about doing research in earth’s resistivity and phase using the native electromagnetic field. The paper adopts 2D finite element method as the magnetotelluric forward method and calculates the total field by primary field (also named background field) plus secondary field. We can?get more accurate forward result through the finite element method and we can get the result effected by the dense degree of grid slightly by the total field. But the method is not effective?enough when the model is divided into relative big grid. When the frequency changes, program solves relevant equation separately. According to the feature of the algorithm, we apply MPI parallel method in the algorithm. Every process solves relevant equation. The account of frequency?that a process needs to solve in parallel computation is less than the account that the process?needs to solve in serial algorithm. We can see that the forward result is the same with the serial algorithm and proves the correctness of algorithm. We do statistics about the efficiency of the parallel algorithm. When the account of processes is from 2 to 8, the speedup is from 1.63 to 2.64. It proves the effectiveness of the parallel algorithm.

2D TEM Modeling for a Hydrogeological Study in the ParanáSedimentary Basin, Brazil

This work uses 2D TEM (Transient Electromagnetic) modeling for a hydrogeological study in the Paraná sedimentary basin. The study area is located at the northern region of the state of S?o Paulo, Brazil, where groundwater is exploited from two aquifer systems: one sedimentary, shallow, and the other crystalline, deep. The interest in applying the TEM method in this area owes to the high exploitation rates of groundwater from the crystalline aquifer system for irrigation, which is triggering considerable seismic activity locally. This aquifer system is composed of fractured basalt within the Serra Geral Formation and is about 120 m deep. Eighty-six TEM soundings were acquired at this location, but in nine cases the data did not fit the modelled curve for 1D geoelectrical models due to the geological complexity of the area. This paper shows 2D geoelectrical modeling results based on the FDTD (Finite Differences in Time Domain) method to explain the lateral resistivity variation within the geological setting. A 2D model was generated for each sounding and compared with 1D inversion models as well as with direct information from wells. The results show some vertical variations of about 10 to 30 meters on the upper interface of the basalt layer from Serra Geral Formation. They are located at approximately 60 meters from the center of the soundings. The existence of these 2D structures in the subsurface can be related to the drainage system in the study area. The presence of these structures may indicate a connection between the shallow and deep aquifer systems, acting like a conduit that may contribute to the seismic activity reported.

Modeling of Adsorption of Bi(III) from Nitrate Medium by Impregnated Resin D2EHPA/XAD-1180

Di(2-ethylhexyl)phosphoric acid (D2EHPA) in acetone was supported on the Amberlite XAD-1180 polystyrene divinylbenzene copolymer resin. The use of XAD-1180 impregnated with D2EHPA for the extraction of bismuth(III) from nitrate medium was carried out using batch technique. Various parameters affecting the uptake of this metal ion were described in the previous paper (Belkhouche and Didi, 2010) and the capacity of the impregnated resin for bismuth(III) was found to be 490.7 mg/g of resin. Effect of temperature on the values of distribution equilibrium was studied to evaluate the changes in standard thermodynamic quantities. A comparison of Langmuir forms I, II and Freundlich sorption isotherms was realized and the kinetic models applied to the adsorption rate data were evaluated for Lagergren first order, the pseudo second order and Morris–Weber models. From the results, the adsorption of Bi(III) onto D2EHPA/XAD-1180 resin shown the exothermic character and followed the Langmuir form II isotherm. Thus, the capacity of monolayer adsorption of Bi(III) was equal to 769.23 mg/g of resin. Both the Lagergren pseudo first order and film-diffusion models were found to best describe the experimental rate data.