Photocatalytic H_(2) evolution from seawater splitting presents a promising approach to tackle the fossil energy crisis and mitigate carbon emission due to the abundant source of seawater and sunlight on the earth.How...Photocatalytic H_(2) evolution from seawater splitting presents a promising approach to tackle the fossil energy crisis and mitigate carbon emission due to the abundant source of seawater and sunlight on the earth.However,the development of efficient photocatalysts for seawater splitting remains a formidable challenge.Herein,a 2D/2D ZnIn_(2)S_(4)/WO_(3)(ZIS/WO_(3))heterojunction nanostructure is fabricated to efficiently separate the photoinduced carriers by steering electron transfer from the conduction band minimum of WO_(3) to the valence band maximum of ZIS via constructing internal electric field.Subsequently,plasmonic Au nanoparticles(NPs)as a novel photosensitizer and a reduction cocatalyst are anchored on ZIS/WO_(3) surface to further enhance the optical absorption of ZIS/WO_(3) heterojunction and accelerate the catalytic conversion.The obtained Au/ZIS/WO_(3) photocatalyst exhibits an outstanding H_(2) evolution rate of 2610.6 or 3566.3μmol g^(-1)h~(-1)from seawater splitting under visible or full-spectrum light irradiation,respectively.These rates represent an impressive increase of approximately 7.3-and 6,6-fold compared to those of ZIS under the illumination of the same light source.The unique 2D/2D structure,internal electric field,and plasmonic metal modification together boost the photocatalytic H_(2) evolution rate of Au/ZIS/WO_(3),making it even comparable to H_(2) evolution from pure water splitting.The present work sheds light on the development of efficient photocatalysts for seawater splitting.展开更多
3D printing techniques offer an effective method in fabricating complex radially multi-material structures.However,it is challenging for complex and delicate radially multi-material model geometries without supporting...3D printing techniques offer an effective method in fabricating complex radially multi-material structures.However,it is challenging for complex and delicate radially multi-material model geometries without supporting structures,such as tissue vessels and tubular graft,among others.In this work,we tackle these challenges by developing a polar digital light processing technique which uses a rod as the printing platform.The 3D model fabrication is accomplished through line projection.The rotation and translation of the rod are synchronized to project and illuminate the photosensitive material volume.By controlling the distance between the rod and the printing window,we achieved the printing of tubular structures with a minimum wall thickness as thin as 50 micrometers.By controlling the width of fine slits at the printing window,we achieved the printing of structures with a minimum feature size of 10 micrometers.Our process accomplished the fabrication of thin-walled tubular graft structure with a thickness of only 100 micrometers and lengths of several centimeters within a timeframe of just 100 s.Additionally,it enables the printing of axial multi-material structures,thereby achieving adjustable mechanical strength.This method is conducive to rapid customization of tubular grafts and the manufacturing of tubular components in fields such as dentistry,aerospace,and more.展开更多
The development of tissue engineering and regeneration research has created new platforms for bone transplantation.However,the preparation of scaffolds with good fiber integrity is challenging,because scaffolds prepar...The development of tissue engineering and regeneration research has created new platforms for bone transplantation.However,the preparation of scaffolds with good fiber integrity is challenging,because scaffolds prepared by traditional printing methods are prone to fiber cracking during solvent evaporation.Human skin has an excellent natural heat-management system,which helps to maintain a constant body temperature through perspiration or blood-vessel constriction.In this work,an electrohydrodynamic-jet 3D-printing method inspired by the thermal-management system of skin was developed.In this system,the evaporation of solvent in the printed fibers can be adjusted using the temperature-change rate of the substrate to prepare 3D structures with good structural integrity.To investigate the solvent evaporation and the interlayer bonding of the fibers,finite-element analysis simulations of a three-layer microscale structure were carried out.The results show that the solvent-evaporation path is from bottom to top,and the strain in the printed structure becomes smaller with a smaller temperaturechange rate.Experimental results verified the accuracy of these simulation results,and a variety of complex 3D structures with high aspect ratios were printed.Microscale cracks were reduced to the nanoscale by adjusting the temperature-change rate from 2.5 to 0.5℃s-1.Optimized process parameters were selected to prepare a tissue engineering scaffold with high integrity.It was confirmed that this printed scaffold had good biocompatibility and could be used for bone-tissue regeneration.This simple and flexible 3D-printing method can also help with the preparation of a wide range of micro-and nanostructured sensors and actuators.展开更多
Internet of Vehicles (IoV) is a new system that enables individual vehicles to connect with nearby vehicles,people, transportation infrastructure, and networks, thereby realizing amore intelligent and efficient transp...Internet of Vehicles (IoV) is a new system that enables individual vehicles to connect with nearby vehicles,people, transportation infrastructure, and networks, thereby realizing amore intelligent and efficient transportationsystem. The movement of vehicles and the three-dimensional (3D) nature of the road network cause the topologicalstructure of IoV to have the high space and time complexity.Network modeling and structure recognition for 3Droads can benefit the description of topological changes for IoV. This paper proposes a 3Dgeneral roadmodel basedon discrete points of roads obtained from GIS. First, the constraints imposed by 3D roads on moving vehicles areanalyzed. Then the effects of road curvature radius (Ra), longitudinal slope (Slo), and length (Len) on speed andacceleration are studied. Finally, a general 3D road network model based on road section features is established.This paper also presents intersection and road section recognition methods based on the structural features ofthe 3D road network model and the road features. Real GIS data from a specific region of Beijing is adopted tocreate the simulation scenario, and the simulation results validate the general 3D road network model and therecognitionmethod. Therefore, thiswork makes contributions to the field of intelligent transportation by providinga comprehensive approach tomodeling the 3Droad network and its topological changes in achieving efficient trafficflowand improved road safety.展开更多
The novelty of this research lies in the successful fabrication of a 3D-printed honeycomb structure filled with nanofillers for acoustic properties,utilizing an impedance tube setup in accordance with ASTM standard E ...The novelty of this research lies in the successful fabrication of a 3D-printed honeycomb structure filled with nanofillers for acoustic properties,utilizing an impedance tube setup in accordance with ASTM standard E 1050-12.The Creality Ender-3,a 3D printer,was used for printing the honeycomb structures,and polylactic acid(PLA)material was employed for their construction.The organic,inorganic,and polymeric compounds within the composites were identified using fourier transformation infrared(FTIR)spectroscopy.The structure and homogeneity of the samples were examined using a field emission scanning electron microscope(FESEM).To determine the sound absorption coefficient of the 3D printed honeycomb structure,numerous samples were systematically developed using central composite design(CCD)and analysed using response surface methodology(RSM).The RSM mathematical model was established to predict the optimum values of each factor and noise reduction coefficient(NRC).The optimum values for an NRC of 0.377 were found to be 1.116 wt% carbon black,1.025 wt% aluminium powder,and 3.151 mm distance between parallel edges.Overall,the results demonstrate that a 3Dprinted honeycomb structure filled with nanofillers is an excellent material that can be utilized in various fields,including defence and aviation,where lightweight and acoustic properties are of great importance.展开更多
The important supporting component in a gas turbine is the casing,which has the characteristics of large size,complex structure,and thin wall.In the context of existing 3DP sand casting processes,casting crack defects...The important supporting component in a gas turbine is the casing,which has the characteristics of large size,complex structure,and thin wall.In the context of existing 3DP sand casting processes,casting crack defects are prone to occur.This leads to an increase in the scrap rate of casings,causing significant resource wastage.Additionally,the presence of cracks poses a significant safety hazard after the casings are put into service.The generation of different types of crack defects in stainless steel casings is closely related to casting stress and the high-temperature concession of the sand mold.Therefore,the types and causes of cracks in stainless steel casing products,based on their structural characteristics,were systematically analyzed.Various sand molds with different internal topology designs were printed using the 3DP technology to investigate the impact of sand mold structures on high-temperature concession.The optimal sand mold structure was used to cast casings,and the crack suppression effect was verified by analyzing its eddy current testing results.The experimental results indicate that the skeleton structure has an excellent effect on suppressing cracks in the casing.This research holds important theoretical and engineering significance in improving the quality of casing castings and reducing production costs.展开更多
Reaction products of 2,4,6-tris(4-phenyl-phenoxy)-1,3,5-triazine derived from 4-phenylphenol cyanate ester and phenyl glycidyl ether were analyzed. In addition to an isocyanurate compound and an oxazolidone compound w...Reaction products of 2,4,6-tris(4-phenyl-phenoxy)-1,3,5-triazine derived from 4-phenylphenol cyanate ester and phenyl glycidyl ether were analyzed. In addition to an isocyanurate compound and an oxazolidone compound which were well known as reaction products of cyanate esters and epoxy resins, compounds with hybrid ring structure of cyanurate/isocyanurate were determined. Gibbs free energies of the compound having hybrid ring structure of cyanurate/isocyanurate with two isocyanurate moiety were found to be lower than that of the compound with cyanurate ring structure through calculations. Calculation data supported the existence of hybrid ring structure of cy-anurate/isocyanurate. It was revealed that isomerization from cyanurate to isocyanurate occurs via hybrid ring structure of cyanurate/isocyanurate in the reaction of aryl cyanurate and epoxy.展开更多
Two compounds,3-oxo-N-o-tolylbenzo[d]isothiazole-2（3H）-carboxamide （1） and N-（2-methoxyphenyl）-3-oxobenzo[d]isothiazole-2（3H）-carboxamide （2）,were synthesized from the initial compound benzo[d]isothiazol-3...Two compounds,3-oxo-N-o-tolylbenzo[d]isothiazole-2（3H）-carboxamide （1） and N-（2-methoxyphenyl）-3-oxobenzo[d]isothiazole-2（3H）-carboxamide （2）,were synthesized from the initial compound benzo[d]isothiazol-3（2H）-one （BIT） and characterized by 1 H NMR,IR and elemental analysis,respectively.The single crystals of compounds 1 and 2 were obtained and determined by X-ray diffraction analysis.The preliminary results of biological activity experiment show that some of the title compounds exhibited a favorable antimicrobial activity.展开更多
Fifteen novel 2-（3-oxobenzo[d]isothiazol-2（3H）-yl）ethyl benzoates were synthesi- zed by the condensation of 2-（2-hydroxyethyl）benzo[d]isothiazol-3（2H）-one with substituted benzoic acids in dichloromethane. All...Fifteen novel 2-（3-oxobenzo[d]isothiazol-2（3H）-yl）ethyl benzoates were synthesi- zed by the condensation of 2-（2-hydroxyethyl）benzo[d]isothiazol-3（2H）-one with substituted benzoic acids in dichloromethane. All the compounds were characterized by elemental analysis, IR, ESI-MS and 1H NMR. The crystal structures for 2-（2-hydroxyethyl）benzo[d]isothiazol-3（2H）-one （2） and 2-（3-oxobenzo[d]isothiazol-2（3H）-yl）ethyl 2-methoxybenzoate （30） have been determined by X-ray crystal structure analysis. Compound 2 （C9H9NO2S） crystallizes in the monoclinic system, space group Pn with a = 10.552（3）, b = 7.849（2）, c = 10.765（4） A, β = 103.128（4）°, V= 868.3（5） A3, Mr = 195.24, Dc = 1.493 Mg.m-3, μ = 0.33 mm-1, F（000） = 408, Z = 4, R= 0.0314 and wR= 0.0628. Compound 30 （C17H15NO4S） crystallizes in the triclinic system, space group P1 with a = 8.028（2）, b = 9.300（2）, c = 10.430（3）A, V= 752.1（3）A3, Mr = 329.36, D,= 1.454 Mg.m-3, p = 0.24 mm-1, F（000） = 344, Z = 2, R = 0.0377 and wR = 0.0904. The preliminary biological test indicated that the title compounds show better growth inhibitory activity against the gram-positive bacteria than the gram-negative bacteria.展开更多
Constructing a suitable heterojunction photocatalytic system from two photocatalytic materials is an efficient approach for designing extremely efficient photocatalysts for a broader range of environmental,medical,and...Constructing a suitable heterojunction photocatalytic system from two photocatalytic materials is an efficient approach for designing extremely efficient photocatalysts for a broader range of environmental,medical,and energy applications.Recently,the construction of a step-scheme heterostructure system(hereafter called the S-scheme)has received widespread attention in the photocatalytic field due to its ability to achieve efficient photogenerated carrier separation and obtain strong photo-redox ability.Herein,a novel S-scheme heterojunction system consisting of 2D O-doped g-C_(3)N_(4)(OCN)nanosheets and 3D N-doped Nb_(2)O_(5)/C(N-NBO/C)nanoflowers is constructed via ultrasonication and vigorous agitation technique followed by heat treatment for the photocatalytic degradation of Rhodamine B(RhB).Detailed characterization and decomposition behaviour of RhB showed that the fabricated material shows excellent photocatalytic efficiency and stability towards RhB photodegradation under visible-light illumination.The enhanced performance could be attributed to the following factors:fast charge transfer,highly-efficient charge separation,extended lifetime of photoinduced charge carriers,and the high redox capability of the photoinduced charges in the S-scheme system.Various trapping experiment conditions and electron paramagnetic resonance provide clear evidence of the S-scheme photogenerated charge transfer path,meanwhile,the RhB mineralization degradation pathway was also investigated using LC-MS.This study presents an approach to constructing Nb_(2)O_(5)-based S-scheme heterojunctions for photocatalytic applications.展开更多
TiO2@Ni(OH)2 core-shell microspheres were synthesized by a facile strategy to obtain a perfect 3D flower-like nanostructure with well-arranged Ni(OH)2 nanoflakes on the surfaces of TiO2 microspheres;this arrangement l...TiO2@Ni(OH)2 core-shell microspheres were synthesized by a facile strategy to obtain a perfect 3D flower-like nanostructure with well-arranged Ni(OH)2 nanoflakes on the surfaces of TiO2 microspheres;this arrangement led to a six-fold enhancement in photocatalytic hydrogen evolution. The unique p-n type heterostructure not only promotes the separation and transfer of photogenerated charge carriers significantly, but also offers more active sites for photocatalytic hydrogen production. A photocatalytic mechanism is proposed based on the results of electrochemical measurements and X-ray photoelectron spectroscopy.展开更多
Photocatalytic method has been intensively explored for Cr(VI)reduction owing to its efficient and environmentally friendly natures.In order to obtain a high efficiency in practical application,efficient photocatalyst...Photocatalytic method has been intensively explored for Cr(VI)reduction owing to its efficient and environmentally friendly natures.In order to obtain a high efficiency in practical application,efficient photocatalysts need to be developed.Here,ZnIn2S4/SnS2 with a three-dimensional(3D)heterostructure was prepared by a hydrothermal method and its photocatalytic performance in Cr(VI)reduction was investigated.When the mass ratio of SnS2 to ZnIn2S4 is 1:10,the ZnIn2S4/SnS2 composite exhibits the highest photocatalytic activity with 100%efficiency for Cr(VI)(50 mg/L)reduction within 70 min under visible-light irradiation,which is much higher than those of pure ZnIn2S4 and SnS2.The enhanced charge separation and the light absorption have been confirmed from the photoluminescence and UV-vis absorption spectra to be the two reasons for the increased activity towards photocatalytic Cr(VI)reduction.In addition,after three cycles of testing,no obvious degradation is observed with the 3D heterostructured ZnIn2S4/SnS2,which maintains a good photocatalytic stability.展开更多
The crystal structure of the new title compound 2-ethoxy-3-n-butyl- benzofuro[2,3d]pyrimidin-4（3H）-one （C16H18N2O3, Mr = 286.32） has been prepared and determined by singlecrystal X-ray diffraction. The crystal is ...The crystal structure of the new title compound 2-ethoxy-3-n-butyl- benzofuro[2,3d]pyrimidin-4（3H）-one （C16H18N2O3, Mr = 286.32） has been prepared and determined by singlecrystal X-ray diffraction. The crystal is of monoclinic, space group P21/c with a = 13.7167（14）, b = 13.113（1）, c = 8.378（1） A, β = 98.992（2）^o, V = 1488.4（3） A^3, Z = 4, Dc = 1.278, F（000） = 608, μ = 0.089 mm^-1, MoKa radiation （2 = 0.71073）, R = 0.0498, wR = 0.1238 for 2336 observed reflections with I 〉 2σ（I）. X-ray diffraction analysis reveals that all ring atoms in the benzo[4, 5]furo [2,3-d] pyrimi- dinone moieties are almost coplanar.展开更多
Black phosphorus(BP),an interesting and multi-functional non-metal material,has attracted widespread attention.In this work,2D BP/2D g-C3N4 heterostructure had been fabricated at extremely low temperature,which was us...Black phosphorus(BP),an interesting and multi-functional non-metal material,has attracted widespread attention.In this work,2D BP/2D g-C3N4 heterostructure had been fabricated at extremely low temperature,which was used to reduce CO2 for the first time.With introduction of 2D BP,the separation of photogenerated holes and electrons was extremely boosted,and composites showed excellent photocatalytic performance(CO2 to CO).Meanwhile,the targeted composite could keep high selectivity for CO generation and CO generation rate can be up to 187.7μmol g−1 h^−1.The formation process of the unique heterostructure and the key factor affecting the photocatalytic performance were also discussed.This work provides a new approach for designing metal free photocatalyst,which is used for CO2 reduction.展开更多
The title complex [Sr3（pda）2（Hpda）2（H2O）2]n·2nH2O（H2pda = pyridine-2,6-dicar- boxylic acid） has been prepared under solvothermal conditions. It has been characterized by X-ray single-crystal diffraction, ...The title complex [Sr3（pda）2（Hpda）2（H2O）2]n·2nH2O（H2pda = pyridine-2,6-dicar- boxylic acid） has been prepared under solvothermal conditions. It has been characterized by X-ray single-crystal diffraction, IR and elemental analysis. The crystal belongs to the monoclinic system, space group P21/c with a = 10.3795（8）, b = 9.2225（7）, c = 18.5726（14） , β = 104.377（2）o, V = 1722.2（2） 3, C28H22N4O20Sr3, Mr = 997.36, Z = 2, Dc = 1.923 g/cm3, μ = 4.722 mm-1, F（000） = 984, the final R = 0.0269 and wR = 0.0538. This complex possesses a 3-D structure which is constructed from 1-D chain motifs linked by carboxylate groups. The luminescent property of the title complex has been investigated.展开更多
Up to this date,researchers are still facing difficulties to expand the technology of direct methanol fuel cells(DMFCs) because of the high overpotential required to oxidize the methanol and its relatively poor perfor...Up to this date,researchers are still facing difficulties to expand the technology of direct methanol fuel cells(DMFCs) because of the high overpotential required to oxidize the methanol and its relatively poor performance due to CO poisoning of the leading-high cost anode catalyst.In line with this,we have successfully modified the morphological structure and composition of low cost cobalt based-metal oxides,MCo_2O_4(M = Zn and Ni),with the simple and noble use of polyvinyl pyrrolidone(PVP) as growth modifier and surface stabilizer during the synthesis of nanoparticles in our previous reports,which shown high electrocatalytic activity and strong stability.Due to the good performance of our PVP modified MCo_2O_4 towards pseudocapacitor and oxygen evolution reaction applications,we decided to extend our research study to methanol oxidation reaction.Remarkably,PVP modified Ni Co_2O_4 electrode directly grown on nickel foam substrate via a simple hydrothermal process exhibited better performance compared with PVP modified ZnCo_2O_4 and NiCo_2O_4 without PVP.It had obtained a remarkably low onset potential of 0.285 V and high current density of 280 m A cm^(-2),and shown great stability and high poison tolerance during a continuous CV cycling and Chronoamperometry test,which attained high efficiency of 86.86%and 98.52%,respectively.These positive results of PVP modified Ni Co_2O_4 electrode towards MOR might be attributed to its hierarchical 3 D nanostructures with highly mesoporous surface and large surface area which may have provided numerous electroactive sites,and the exceptional corrosion stability of Ni Co_2O_4 electrode in alkaline solution.展开更多
基金supported by the National Natural Science Foundation of China(21872104,21501131,21978216 and 22272082)the Natural Science Foundation of Tianjin for Distinguished Young Scholar(20JCJQJC00150)the Analytical&Testing Center of Tiangong University for PL work。
文摘Photocatalytic H_(2) evolution from seawater splitting presents a promising approach to tackle the fossil energy crisis and mitigate carbon emission due to the abundant source of seawater and sunlight on the earth.However,the development of efficient photocatalysts for seawater splitting remains a formidable challenge.Herein,a 2D/2D ZnIn_(2)S_(4)/WO_(3)(ZIS/WO_(3))heterojunction nanostructure is fabricated to efficiently separate the photoinduced carriers by steering electron transfer from the conduction band minimum of WO_(3) to the valence band maximum of ZIS via constructing internal electric field.Subsequently,plasmonic Au nanoparticles(NPs)as a novel photosensitizer and a reduction cocatalyst are anchored on ZIS/WO_(3) surface to further enhance the optical absorption of ZIS/WO_(3) heterojunction and accelerate the catalytic conversion.The obtained Au/ZIS/WO_(3) photocatalyst exhibits an outstanding H_(2) evolution rate of 2610.6 or 3566.3μmol g^(-1)h~(-1)from seawater splitting under visible or full-spectrum light irradiation,respectively.These rates represent an impressive increase of approximately 7.3-and 6,6-fold compared to those of ZIS under the illumination of the same light source.The unique 2D/2D structure,internal electric field,and plasmonic metal modification together boost the photocatalytic H_(2) evolution rate of Au/ZIS/WO_(3),making it even comparable to H_(2) evolution from pure water splitting.The present work sheds light on the development of efficient photocatalysts for seawater splitting.
基金supported financially by the Fundamental Research Funds for the Central Universities (YWF-22-K-101,YWF-23-L-805 and YWF-23-YG-QB-006)the support from the National Natural Science Foundation of China (12372106)Fundamental Research Funds for the Central Universities
文摘3D printing techniques offer an effective method in fabricating complex radially multi-material structures.However,it is challenging for complex and delicate radially multi-material model geometries without supporting structures,such as tissue vessels and tubular graft,among others.In this work,we tackle these challenges by developing a polar digital light processing technique which uses a rod as the printing platform.The 3D model fabrication is accomplished through line projection.The rotation and translation of the rod are synchronized to project and illuminate the photosensitive material volume.By controlling the distance between the rod and the printing window,we achieved the printing of tubular structures with a minimum wall thickness as thin as 50 micrometers.By controlling the width of fine slits at the printing window,we achieved the printing of structures with a minimum feature size of 10 micrometers.Our process accomplished the fabrication of thin-walled tubular graft structure with a thickness of only 100 micrometers and lengths of several centimeters within a timeframe of just 100 s.Additionally,it enables the printing of axial multi-material structures,thereby achieving adjustable mechanical strength.This method is conducive to rapid customization of tubular grafts and the manufacturing of tubular components in fields such as dentistry,aerospace,and more.
基金supported by the National Natural Science Foundation of China(Grant No.52105577)the Natural Science Foundation of Zhejiang Province(Grant Nos.LQ22E050001 and LQ21E080007)+1 种基金the Natural Science Foundation of Ningbo(Grant Nos.2021J088 and 2023J376)the Ningbo Yongjiang Talent Introduction Program(Grant No.2021A-137-G).
文摘The development of tissue engineering and regeneration research has created new platforms for bone transplantation.However,the preparation of scaffolds with good fiber integrity is challenging,because scaffolds prepared by traditional printing methods are prone to fiber cracking during solvent evaporation.Human skin has an excellent natural heat-management system,which helps to maintain a constant body temperature through perspiration or blood-vessel constriction.In this work,an electrohydrodynamic-jet 3D-printing method inspired by the thermal-management system of skin was developed.In this system,the evaporation of solvent in the printed fibers can be adjusted using the temperature-change rate of the substrate to prepare 3D structures with good structural integrity.To investigate the solvent evaporation and the interlayer bonding of the fibers,finite-element analysis simulations of a three-layer microscale structure were carried out.The results show that the solvent-evaporation path is from bottom to top,and the strain in the printed structure becomes smaller with a smaller temperaturechange rate.Experimental results verified the accuracy of these simulation results,and a variety of complex 3D structures with high aspect ratios were printed.Microscale cracks were reduced to the nanoscale by adjusting the temperature-change rate from 2.5 to 0.5℃s-1.Optimized process parameters were selected to prepare a tissue engineering scaffold with high integrity.It was confirmed that this printed scaffold had good biocompatibility and could be used for bone-tissue regeneration.This simple and flexible 3D-printing method can also help with the preparation of a wide range of micro-and nanostructured sensors and actuators.
基金the National Natural Science Foundation of China(Nos.62272063,62072056 and 61902041)the Natural Science Foundation of Hunan Province(Nos.2022JJ30617 and 2020JJ2029)+4 种基金Open Research Fund of Key Lab of Broadband Wireless Communication and Sensor Network Technology,Nanjing University of Posts and Telecommunications(No.JZNY202102)the Traffic Science and Technology Project of Hunan Province,China(No.202042)Hunan Provincial Key Research and Development Program(No.2022GK2019)this work was funded by the Researchers Supporting Project Number(RSPD2023R681)King Saud University,Riyadh,Saudi Arabia.
文摘Internet of Vehicles (IoV) is a new system that enables individual vehicles to connect with nearby vehicles,people, transportation infrastructure, and networks, thereby realizing amore intelligent and efficient transportationsystem. The movement of vehicles and the three-dimensional (3D) nature of the road network cause the topologicalstructure of IoV to have the high space and time complexity.Network modeling and structure recognition for 3Droads can benefit the description of topological changes for IoV. This paper proposes a 3Dgeneral roadmodel basedon discrete points of roads obtained from GIS. First, the constraints imposed by 3D roads on moving vehicles areanalyzed. Then the effects of road curvature radius (Ra), longitudinal slope (Slo), and length (Len) on speed andacceleration are studied. Finally, a general 3D road network model based on road section features is established.This paper also presents intersection and road section recognition methods based on the structural features ofthe 3D road network model and the road features. Real GIS data from a specific region of Beijing is adopted tocreate the simulation scenario, and the simulation results validate the general 3D road network model and therecognitionmethod. Therefore, thiswork makes contributions to the field of intelligent transportation by providinga comprehensive approach tomodeling the 3Droad network and its topological changes in achieving efficient trafficflowand improved road safety.
文摘The novelty of this research lies in the successful fabrication of a 3D-printed honeycomb structure filled with nanofillers for acoustic properties,utilizing an impedance tube setup in accordance with ASTM standard E 1050-12.The Creality Ender-3,a 3D printer,was used for printing the honeycomb structures,and polylactic acid(PLA)material was employed for their construction.The organic,inorganic,and polymeric compounds within the composites were identified using fourier transformation infrared(FTIR)spectroscopy.The structure and homogeneity of the samples were examined using a field emission scanning electron microscope(FESEM).To determine the sound absorption coefficient of the 3D printed honeycomb structure,numerous samples were systematically developed using central composite design(CCD)and analysed using response surface methodology(RSM).The RSM mathematical model was established to predict the optimum values of each factor and noise reduction coefficient(NRC).The optimum values for an NRC of 0.377 were found to be 1.116 wt% carbon black,1.025 wt% aluminium powder,and 3.151 mm distance between parallel edges.Overall,the results demonstrate that a 3Dprinted honeycomb structure filled with nanofillers is an excellent material that can be utilized in various fields,including defence and aviation,where lightweight and acoustic properties are of great importance.
基金financially supported by the National Natural Science Foundation of China(No.52175352)the Xing Liao Ying Cai Project of Liaoning Province(No.XLYC2008036)the Shenyang Youth Innovation Talent Support Program(No.RC220429)。
文摘The important supporting component in a gas turbine is the casing,which has the characteristics of large size,complex structure,and thin wall.In the context of existing 3DP sand casting processes,casting crack defects are prone to occur.This leads to an increase in the scrap rate of casings,causing significant resource wastage.Additionally,the presence of cracks poses a significant safety hazard after the casings are put into service.The generation of different types of crack defects in stainless steel casings is closely related to casting stress and the high-temperature concession of the sand mold.Therefore,the types and causes of cracks in stainless steel casing products,based on their structural characteristics,were systematically analyzed.Various sand molds with different internal topology designs were printed using the 3DP technology to investigate the impact of sand mold structures on high-temperature concession.The optimal sand mold structure was used to cast casings,and the crack suppression effect was verified by analyzing its eddy current testing results.The experimental results indicate that the skeleton structure has an excellent effect on suppressing cracks in the casing.This research holds important theoretical and engineering significance in improving the quality of casing castings and reducing production costs.
文摘Reaction products of 2,4,6-tris(4-phenyl-phenoxy)-1,3,5-triazine derived from 4-phenylphenol cyanate ester and phenyl glycidyl ether were analyzed. In addition to an isocyanurate compound and an oxazolidone compound which were well known as reaction products of cyanate esters and epoxy resins, compounds with hybrid ring structure of cyanurate/isocyanurate were determined. Gibbs free energies of the compound having hybrid ring structure of cyanurate/isocyanurate with two isocyanurate moiety were found to be lower than that of the compound with cyanurate ring structure through calculations. Calculation data supported the existence of hybrid ring structure of cy-anurate/isocyanurate. It was revealed that isomerization from cyanurate to isocyanurate occurs via hybrid ring structure of cyanurate/isocyanurate in the reaction of aryl cyanurate and epoxy.
基金Supported by the National Natural Science Foundation of China (No. 20962007)the Creative Talents Plan of Hainan University 211 Project
文摘Two compounds,3-oxo-N-o-tolylbenzo[d]isothiazole-2（3H）-carboxamide （1） and N-（2-methoxyphenyl）-3-oxobenzo[d]isothiazole-2（3H）-carboxamide （2）,were synthesized from the initial compound benzo[d]isothiazol-3（2H）-one （BIT） and characterized by 1 H NMR,IR and elemental analysis,respectively.The single crystals of compounds 1 and 2 were obtained and determined by X-ray diffraction analysis.The preliminary results of biological activity experiment show that some of the title compounds exhibited a favorable antimicrobial activity.
基金Supported by the National Natural Science Foundation of China (No. 20962007)
文摘Fifteen novel 2-（3-oxobenzo[d]isothiazol-2（3H）-yl）ethyl benzoates were synthesi- zed by the condensation of 2-（2-hydroxyethyl）benzo[d]isothiazol-3（2H）-one with substituted benzoic acids in dichloromethane. All the compounds were characterized by elemental analysis, IR, ESI-MS and 1H NMR. The crystal structures for 2-（2-hydroxyethyl）benzo[d]isothiazol-3（2H）-one （2） and 2-（3-oxobenzo[d]isothiazol-2（3H）-yl）ethyl 2-methoxybenzoate （30） have been determined by X-ray crystal structure analysis. Compound 2 （C9H9NO2S） crystallizes in the monoclinic system, space group Pn with a = 10.552（3）, b = 7.849（2）, c = 10.765（4） A, β = 103.128（4）°, V= 868.3（5） A3, Mr = 195.24, Dc = 1.493 Mg.m-3, μ = 0.33 mm-1, F（000） = 408, Z = 4, R= 0.0314 and wR= 0.0628. Compound 30 （C17H15NO4S） crystallizes in the triclinic system, space group P1 with a = 8.028（2）, b = 9.300（2）, c = 10.430（3）A, V= 752.1（3）A3, Mr = 329.36, D,= 1.454 Mg.m-3, p = 0.24 mm-1, F（000） = 344, Z = 2, R = 0.0377 and wR = 0.0904. The preliminary biological test indicated that the title compounds show better growth inhibitory activity against the gram-positive bacteria than the gram-negative bacteria.
文摘Constructing a suitable heterojunction photocatalytic system from two photocatalytic materials is an efficient approach for designing extremely efficient photocatalysts for a broader range of environmental,medical,and energy applications.Recently,the construction of a step-scheme heterostructure system(hereafter called the S-scheme)has received widespread attention in the photocatalytic field due to its ability to achieve efficient photogenerated carrier separation and obtain strong photo-redox ability.Herein,a novel S-scheme heterojunction system consisting of 2D O-doped g-C_(3)N_(4)(OCN)nanosheets and 3D N-doped Nb_(2)O_(5)/C(N-NBO/C)nanoflowers is constructed via ultrasonication and vigorous agitation technique followed by heat treatment for the photocatalytic degradation of Rhodamine B(RhB).Detailed characterization and decomposition behaviour of RhB showed that the fabricated material shows excellent photocatalytic efficiency and stability towards RhB photodegradation under visible-light illumination.The enhanced performance could be attributed to the following factors:fast charge transfer,highly-efficient charge separation,extended lifetime of photoinduced charge carriers,and the high redox capability of the photoinduced charges in the S-scheme system.Various trapping experiment conditions and electron paramagnetic resonance provide clear evidence of the S-scheme photogenerated charge transfer path,meanwhile,the RhB mineralization degradation pathway was also investigated using LC-MS.This study presents an approach to constructing Nb_(2)O_(5)-based S-scheme heterojunctions for photocatalytic applications.
基金supported by the National Natural Science Foundation of China(21773031)the Natural Science Foundation of Fujian Province(2018J01686)the State Key Laboratory of Photocatalysis on Energy and Environment(SKLPEE-2017A01 and SKLPEE-2017B02)~~
文摘TiO2@Ni(OH)2 core-shell microspheres were synthesized by a facile strategy to obtain a perfect 3D flower-like nanostructure with well-arranged Ni(OH)2 nanoflakes on the surfaces of TiO2 microspheres;this arrangement led to a six-fold enhancement in photocatalytic hydrogen evolution. The unique p-n type heterostructure not only promotes the separation and transfer of photogenerated charge carriers significantly, but also offers more active sites for photocatalytic hydrogen production. A photocatalytic mechanism is proposed based on the results of electrochemical measurements and X-ray photoelectron spectroscopy.
基金the support of the National Natural Science Foundation of China (51702087 and 21673066)~~
文摘Photocatalytic method has been intensively explored for Cr(VI)reduction owing to its efficient and environmentally friendly natures.In order to obtain a high efficiency in practical application,efficient photocatalysts need to be developed.Here,ZnIn2S4/SnS2 with a three-dimensional(3D)heterostructure was prepared by a hydrothermal method and its photocatalytic performance in Cr(VI)reduction was investigated.When the mass ratio of SnS2 to ZnIn2S4 is 1:10,the ZnIn2S4/SnS2 composite exhibits the highest photocatalytic activity with 100%efficiency for Cr(VI)(50 mg/L)reduction within 70 min under visible-light irradiation,which is much higher than those of pure ZnIn2S4 and SnS2.The enhanced charge separation and the light absorption have been confirmed from the photoluminescence and UV-vis absorption spectra to be the two reasons for the increased activity towards photocatalytic Cr(VI)reduction.In addition,after three cycles of testing,no obvious degradation is observed with the 3D heterostructured ZnIn2S4/SnS2,which maintains a good photocatalytic stability.
基金This work was supported by the Natural Science Foundation of Hubei Province (2006ABB016)National Natural Science Foundation of China (20672041) Key Project of Science and Technology of Ministry of Education of China (107082, 106116)
文摘The crystal structure of the new title compound 2-ethoxy-3-n-butyl- benzofuro[2,3d]pyrimidin-4（3H）-one （C16H18N2O3, Mr = 286.32） has been prepared and determined by singlecrystal X-ray diffraction. The crystal is of monoclinic, space group P21/c with a = 13.7167（14）, b = 13.113（1）, c = 8.378（1） A, β = 98.992（2）^o, V = 1488.4（3） A^3, Z = 4, Dc = 1.278, F（000） = 608, μ = 0.089 mm^-1, MoKa radiation （2 = 0.71073）, R = 0.0498, wR = 0.1238 for 2336 observed reflections with I 〉 2σ（I）. X-ray diffraction analysis reveals that all ring atoms in the benzo[4, 5]furo [2,3-d] pyrimi- dinone moieties are almost coplanar.
基金supported by the National Natural Science Foundation of China(21676128,21776118,51902138)Hightech Research Key laboratory of Zhenjiang(SS2018002)+4 种基金Jiangsu Funds for Distinguished Young Scientists(BK20190045)Natural Science Foundation of Jiangsu Province(BK20190835)the Priority Academic Program Development of Jiangsu Higher Education Institutions,Key Laboratory of Electrochemical Energy Storage and Energy Conversion of Hainan Province(KFKT2019002)Construction funding of High-level teachers,Jiangsu University(4111510008)the High Performance Computing Platform of Jiangsu University.
文摘Black phosphorus(BP),an interesting and multi-functional non-metal material,has attracted widespread attention.In this work,2D BP/2D g-C3N4 heterostructure had been fabricated at extremely low temperature,which was used to reduce CO2 for the first time.With introduction of 2D BP,the separation of photogenerated holes and electrons was extremely boosted,and composites showed excellent photocatalytic performance(CO2 to CO).Meanwhile,the targeted composite could keep high selectivity for CO generation and CO generation rate can be up to 187.7μmol g−1 h^−1.The formation process of the unique heterostructure and the key factor affecting the photocatalytic performance were also discussed.This work provides a new approach for designing metal free photocatalyst,which is used for CO2 reduction.
基金Supported by the National Natural Science Foundation of China(21272167 and 21201127)a project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institution,Graduate Education Innovation Project in Jiangsu Province(CXZZ12_0808)+1 种基金Qinghai Science&Technology Department of China(2011-G-208 and 2011-Z-722)KLSLRC(KLSLRC-KF-13-HX-1)
文摘The title complex [Sr3（pda）2（Hpda）2（H2O）2]n·2nH2O（H2pda = pyridine-2,6-dicar- boxylic acid） has been prepared under solvothermal conditions. It has been characterized by X-ray single-crystal diffraction, IR and elemental analysis. The crystal belongs to the monoclinic system, space group P21/c with a = 10.3795（8）, b = 9.2225（7）, c = 18.5726（14） , β = 104.377（2）o, V = 1722.2（2） 3, C28H22N4O20Sr3, Mr = 997.36, Z = 2, Dc = 1.923 g/cm3, μ = 4.722 mm-1, F（000） = 984, the final R = 0.0269 and wR = 0.0538. This complex possesses a 3-D structure which is constructed from 1-D chain motifs linked by carboxylate groups. The luminescent property of the title complex has been investigated.
基金supported by the Korea Institute of Energy Technology Evaluation and Planning (KETEP) - Grants funded by the Ministry of Trade,Industry and Energy (MOTIE) (No.20174010201160)the National Research Foundation of Korea (NRF) - Grant funded by the Ministry of Education (No.20090093816),Republic of Korea
文摘Up to this date,researchers are still facing difficulties to expand the technology of direct methanol fuel cells(DMFCs) because of the high overpotential required to oxidize the methanol and its relatively poor performance due to CO poisoning of the leading-high cost anode catalyst.In line with this,we have successfully modified the morphological structure and composition of low cost cobalt based-metal oxides,MCo_2O_4(M = Zn and Ni),with the simple and noble use of polyvinyl pyrrolidone(PVP) as growth modifier and surface stabilizer during the synthesis of nanoparticles in our previous reports,which shown high electrocatalytic activity and strong stability.Due to the good performance of our PVP modified MCo_2O_4 towards pseudocapacitor and oxygen evolution reaction applications,we decided to extend our research study to methanol oxidation reaction.Remarkably,PVP modified Ni Co_2O_4 electrode directly grown on nickel foam substrate via a simple hydrothermal process exhibited better performance compared with PVP modified ZnCo_2O_4 and NiCo_2O_4 without PVP.It had obtained a remarkably low onset potential of 0.285 V and high current density of 280 m A cm^(-2),and shown great stability and high poison tolerance during a continuous CV cycling and Chronoamperometry test,which attained high efficiency of 86.86%and 98.52%,respectively.These positive results of PVP modified Ni Co_2O_4 electrode towards MOR might be attributed to its hierarchical 3 D nanostructures with highly mesoporous surface and large surface area which may have provided numerous electroactive sites,and the exceptional corrosion stability of Ni Co_2O_4 electrode in alkaline solution.
