Coal working face is damaged more and more seriously by water below the coal face floor. Therefore, floor water detection is a must in the process of extraction. This article aims to introducing application and princi...Coal working face is damaged more and more seriously by water below the coal face floor. Therefore, floor water detection is a must in the process of extraction. This article aims to introducing application and principle of the two-gateways parallel 3-D electrical technology and the arrangement of the observation system. The authors use this method to detect the water under the floor of a mine in north of Anhui. The results show that the two-gateways parallel 3-D electrical technology can accurately locate the water-rich areas, providing the basis for drilling drainage and grouting construction.展开更多
The paper deals with the application of 3 -D visible technology to reservoir management. Making use of this method for expanding - spread data point in reservoir management, can discard the false and retain the true d...The paper deals with the application of 3 -D visible technology to reservoir management. Making use of this method for expanding - spread data point in reservoir management, can discard the false and retain the true during data recording. As a result, The quality of data recording is ensured. In reservoir description, the reservoir characteristics, such as space distribution,physical change and fluid distribution may be identified by restoring palaeostructures, building - up 3-D facics tract model and 3-D fracture system model. Seismic interpretation, geologic modeling and numerical simulation are well integrated so that they can be promote reservoir performance management to develop into the intensive management pattern.展开更多
The traditional computed tomography(CT)reconstruction methods are noisy,low resolution,poor contrast,and generally not suitable to detect the smaller flaws.Besides,the filter design is also difficult.The CT characteri...The traditional computed tomography(CT)reconstruction methods are noisy,low resolution,poor contrast,and generally not suitable to detect the smaller flaws.Besides,the filter design is also difficult.The CT characteristics reconstruction technology was brought forward to improve in these aspects,which is defined to directly reconstruct the characteristics of the projection for the best requirements not the overall image quality.The two-dimension(2D)and three-dimension(3D)CT characteristics reconstruction algorithm were firstly introduced,then by detailed analysis,experimental results and comparsion of parameters calculated,its advantages in keeping better high-frequency feature,better noise immunity,short time-consuming and easier design are verified.展开更多
New Yorks Surprise findings on a chest CT scan -- unrelated to the original reason for having the 3 -D imaging performed -- may help identify people at high risk for cardiovascular disease, suggests a new Dutch study....New Yorks Surprise findings on a chest CT scan -- unrelated to the original reason for having the 3 -D imaging performed -- may help identify people at high risk for cardiovascular disease, suggests a new Dutch study. 'In the last decade, image quality of chest CT scans has improved considerably. As a consequence, ancillary findings are encountered more and more in daily routine care,' lead researcher Dr. Martijn Gondrie of University Medical Center Utrecht, in the Netherlands, told Reuters Health in an e-mail. The bonus pictures would come at no additional cost to the patient, either in terms of radiation exposure or money out of pocket.展开更多
It is an active research area to reconstruct 3-D object and display its visible surfacesfrom cross-sectional images. In this paper, the methods of reconstructing 3-D object from medicalCT images and displaying the vis...It is an active research area to reconstruct 3-D object and display its visible surfacesfrom cross-sectional images. In this paper, the methods of reconstructing 3-D object from medicalCT images and displaying the visible surfaces are discussed. A polygon approximation methodthat forms polygon with the same number of segment points and a fast interpolation method forcross-sectional contours are presented at first. Then the voxel set of a human liver is reconstructed.And then the liver voxel set is displayed using depth and gradient shading methods. The softwareis written in C programming language at a microcomputer image processing system with a PC/ATcomputer as the host and a PC-VISION board as the image processing unit. The result of theprocessing is satisfying.展开更多
Aiming at the interferometric inverse synthetic aperture radar （InlSAR） imaging in the presence of squint, we investigate the influence of squint on the InlSAR imaging. First, coupling of the squint additive phase a...Aiming at the interferometric inverse synthetic aperture radar （InlSAR） imaging in the presence of squint, we investigate the influence of squint on the InlSAR imaging. First, coupling of the squint additive phase and the target azimuth/altitude coordinates to be solved may make the solution more difficult. Second, the squint angle may lead to estimation error of the vertical coordinates and distortion of the ultimate image. Traditional InlSAR imaging algorithms can not solve the above two problems effectively, so we propose a new method which combines the nonlinear least square （NLS） and coordinates transform （CT） to estimate the target coordinates, and a three-dimensional （3-D） image consistent with the real target is obtained accordingly. Simulations show that the proposed method is effective for the squint-mode InlSAR imaging.展开更多
文摘Coal working face is damaged more and more seriously by water below the coal face floor. Therefore, floor water detection is a must in the process of extraction. This article aims to introducing application and principle of the two-gateways parallel 3-D electrical technology and the arrangement of the observation system. The authors use this method to detect the water under the floor of a mine in north of Anhui. The results show that the two-gateways parallel 3-D electrical technology can accurately locate the water-rich areas, providing the basis for drilling drainage and grouting construction.
文摘The paper deals with the application of 3 -D visible technology to reservoir management. Making use of this method for expanding - spread data point in reservoir management, can discard the false and retain the true during data recording. As a result, The quality of data recording is ensured. In reservoir description, the reservoir characteristics, such as space distribution,physical change and fluid distribution may be identified by restoring palaeostructures, building - up 3-D facics tract model and 3-D fracture system model. Seismic interpretation, geologic modeling and numerical simulation are well integrated so that they can be promote reservoir performance management to develop into the intensive management pattern.
基金National Natural Science Foundation of China(No.61471325)
文摘The traditional computed tomography(CT)reconstruction methods are noisy,low resolution,poor contrast,and generally not suitable to detect the smaller flaws.Besides,the filter design is also difficult.The CT characteristics reconstruction technology was brought forward to improve in these aspects,which is defined to directly reconstruct the characteristics of the projection for the best requirements not the overall image quality.The two-dimension(2D)and three-dimension(3D)CT characteristics reconstruction algorithm were firstly introduced,then by detailed analysis,experimental results and comparsion of parameters calculated,its advantages in keeping better high-frequency feature,better noise immunity,short time-consuming and easier design are verified.
文摘New Yorks Surprise findings on a chest CT scan -- unrelated to the original reason for having the 3 -D imaging performed -- may help identify people at high risk for cardiovascular disease, suggests a new Dutch study. 'In the last decade, image quality of chest CT scans has improved considerably. As a consequence, ancillary findings are encountered more and more in daily routine care,' lead researcher Dr. Martijn Gondrie of University Medical Center Utrecht, in the Netherlands, told Reuters Health in an e-mail. The bonus pictures would come at no additional cost to the patient, either in terms of radiation exposure or money out of pocket.
文摘It is an active research area to reconstruct 3-D object and display its visible surfacesfrom cross-sectional images. In this paper, the methods of reconstructing 3-D object from medicalCT images and displaying the visible surfaces are discussed. A polygon approximation methodthat forms polygon with the same number of segment points and a fast interpolation method forcross-sectional contours are presented at first. Then the voxel set of a human liver is reconstructed.And then the liver voxel set is displayed using depth and gradient shading methods. The softwareis written in C programming language at a microcomputer image processing system with a PC/ATcomputer as the host and a PC-VISION board as the image processing unit. The result of theprocessing is satisfying.
基金supported by the China National Funds for Distinguished Young Scientists (Grant No.61025006)
文摘Aiming at the interferometric inverse synthetic aperture radar （InlSAR） imaging in the presence of squint, we investigate the influence of squint on the InlSAR imaging. First, coupling of the squint additive phase and the target azimuth/altitude coordinates to be solved may make the solution more difficult. Second, the squint angle may lead to estimation error of the vertical coordinates and distortion of the ultimate image. Traditional InlSAR imaging algorithms can not solve the above two problems effectively, so we propose a new method which combines the nonlinear least square （NLS） and coordinates transform （CT） to estimate the target coordinates, and a three-dimensional （3-D） image consistent with the real target is obtained accordingly. Simulations show that the proposed method is effective for the squint-mode InlSAR imaging.
