期刊文献+
共找到7篇文章
< 1 >
每页显示 20 50 100
Sensitivity analysis for the total nitrogen pollution of the Danjiangkou Reservoir based on a 3-D water quality model 被引量:1
1
作者 Libin CHEN Zhifeng YANG Haifei LIU 《Frontiers of Structural and Civil Engineering》 SCIE EI CSCD 2017年第4期609-619,共11页
Inter-basin water deal of nitrogen are great transfers containing a great threats to human health, biodiversity, and air and water quality in the recipient area. Danjiangkou Reservoir, the source reservoir for China... Inter-basin water deal of nitrogen are great transfers containing a great threats to human health, biodiversity, and air and water quality in the recipient area. Danjiangkou Reservoir, the source reservoir for China's South-to-North Water Diversion Middle Route Project, suffers from total nitrogen pollution and threatens the water transfer to a number of metropolises including the capital, Beijing. To locate the main source of nitrogen pollution into the reservoir, especially near the Taocha canal head, where the intake of water transfer begins, we constructed a 3-D water quality model. We then used an inflow sensitivity analysis method to analyze the sig- nificance of inflows from each tributary that may contribute to the total nitrogen pollution and affect water quality. The results indicated that the Han River was the most significant river with a sensitivity index of 0.340, followed by the Dan River with a sensitivity index of 0.089, while the Guanshan River and the Lang River were not significant, with the sensitivity indices of 0.002 and 0.001, respectively. This result implies that the concentration and amount of nitrogen inflow outweighs the geographical position of the tributary for sources of total nitrogen pollution to the Taocha canal head of the Danjiangkou Reservoir. 展开更多
关键词 nitrogen pollution 3-d water quality model sensitivity analysis Danjiangkou Reservoir South-to-North water Diversion Project
原文传递
A NUMERICAL MODEL FOR 3-D FLOW IN OPEN CHANNELS 被引量:1
2
作者 Han Guo-qi Wang De-guan Xu Xie-qing Department of Environmental Engineering,Hohai University,Nanjing 210024,P.R.China 《Journal of Hydrodynamics》 SCIE EI CSCD 1992年第1期1-7,共7页
A 3-D model based on the Reynolds equations with closed k-ε turbulence model is presented in this paper,which can be used to predict surface water flow in open channels.In- stead of the“rigid lid”approximation,the ... A 3-D model based on the Reynolds equations with closed k-ε turbulence model is presented in this paper,which can be used to predict surface water flow in open channels.In- stead of the“rigid lid”approximation,the solution of the free surface equation is implemented in the velocity-pressure iterative procedure on the basis of the conventional SIMPLE method.This model was used to compute the flow in rectangular channels with trenches dredged across the bot- tom.The velocity,eddy viscosity coefficient,turbulent shear stress,turbulent kinetic energy and elevation of the free surface over the trenches dredged in the main channel,can be obtained. The computed results are in good agreement with existing experimentaing data. 展开更多
关键词 3-d surface water flow turbulence model numerical model
原文传递
大型水-氢-氢冷汽轮发电机通风系统的计算及端部通风流道变化对结构件温度的影响 被引量:6
3
作者 李伟力 周醒夫 +2 位作者 霍菲阳 李勇 韩继超 《中国电机工程学报》 EI CSCD 北大核心 2013年第21期109-116,199,共8页
根据330 MW大型水–氢–氢冷汽轮发电机通风结构的特点,建立了半个轴向段电机的通风网络模型,采用流体网络方法计算得到电机运行时的总风量、各通风沟和进风室的风量和压力。为了验证流体网络方法计算的准确性,给出了端部区域内的流体... 根据330 MW大型水–氢–氢冷汽轮发电机通风结构的特点,建立了半个轴向段电机的通风网络模型,采用流体网络方法计算得到电机运行时的总风量、各通风沟和进风室的风量和压力。为了验证流体网络方法计算的准确性,给出了端部区域内的流体与传热耦合三维数学模型,以流体网络计算出的压力和风速作为给定汽轮发电机端部求解域中的边界条件,采用有限体积法计算了铜屏蔽的温度分布,将耦合场计算结果与电机实测结果进行比较,误差满足工程要求。在此基础上,对电机端部区域内铜屏蔽和压圈之间的通风流道面积进行调整,在电机额定运行下,分析调整后铜屏蔽温度的变化,为大型汽轮发电机结构设计提供了可靠的依据。 展开更多
关键词 汽轮发电机 水–氢–氢冷却 流体网络 三维端部区域模型 流体场与温度场
下载PDF
冷却水侧向表层排放特性的三维数值模拟 被引量:1
4
作者 卢新华 陆俊卿 张小峰 《安全与环境学报》 CAS CSCD 北大核心 2009年第2期40-43,共4页
对k-ε双方程湍流模型进行浮力修正,编制了计算程序并对冷却水侧向表层排放出流后的特性进行模拟,计算结果与经验公式吻合较好。在此基础上,探讨了射流出口密度弗劳德数F_r对冷却水侧向表层排放特性的影响。结果表明,F_r越小,射流流核越... 对k-ε双方程湍流模型进行浮力修正,编制了计算程序并对冷却水侧向表层排放出流后的特性进行模拟,计算结果与经验公式吻合较好。在此基础上,探讨了射流出口密度弗劳德数F_r对冷却水侧向表层排放特性的影响。结果表明,F_r越小,射流流核越短,沿上游来流方向的热输移长度越大;同时计算发现,存在-个合适的排水口面积使得射流掺混效果最佳。 展开更多
关键词 环境科学 冷却水 侧排放 三维数值模拟 k—ε模型
下载PDF
阳西海域温排水热扩散的三维数值模拟 被引量:6
5
作者 倪培桐 陈丕翔 黄健东 《广东水利水电》 2015年第6期18-24,共7页
为更好地模拟近海温排水三维结构特征,基于FVCOM模型建立了阳西海域某电厂高精度三维温排水数值模型,模型较好地反映了温升的垂向分层特点。基于三维温排水数学模型的取排水方案比选结果表明,无论是分列式、还是差位式布置方案,模型都... 为更好地模拟近海温排水三维结构特征,基于FVCOM模型建立了阳西海域某电厂高精度三维温排水数值模型,模型较好地反映了温升的垂向分层特点。基于三维温排水数学模型的取排水方案比选结果表明,无论是分列式、还是差位式布置方案,模型都可以计算出较好的比选结果。该文基于FVCOM模型建立的三维温排水数值模型可为电厂取排水布置方案比选工作提供支持,为冷却水工程方案优化布置服务。 展开更多
关键词 温排水 三维数值模型 方案优化
下载PDF
SIMULATION OF HYDRAULIC TRANSIENTS IN HYDROPOWER SYSTEMS USING THE 1-D-3-D COUPLING APPROACH 被引量:22
6
作者 ZHANG Xiao-xi CHENG Yong-guang 《Journal of Hydrodynamics》 SCIE EI CSCD 2012年第4期595-604,共10页
Although the hydraulic transients in pipe systems are usually simulated by using a one-dimensional (l-D) approach, local three-dimensional (3-D) simulations are necessary because of obvious 3-D flow features in so... Although the hydraulic transients in pipe systems are usually simulated by using a one-dimensional (l-D) approach, local three-dimensional (3-D) simulations are necessary because of obvious 3-D flow features in some local regions of the hydropower systems. This paper combines the 1-D method with a 3-D fluid flow model to simulate the Multi-Dimensional (MD) hydraulic transients in hydropower systems and proposes two methods for modeling the compressible water with the correct wave speed, and two strategies for efficiently coupling the 1-D and 3-D computational domains. The methods are validated by simulating the water hammer waves and the oscillations of the water level in a surge tank, and comparing the results ~with the 1-D solution data. An MD study is conducted for the transient flows in a realistic water conveying system that consists of a draft tube, a tailrace surge tank and a tailrace tunnel. It is shown that the 1-D-3-D coupling approach is an efficient and promising way to simulate the hydraulic transients in the hydropower systems in which the interactions between 1-D hydraulic fluctuations of the pipeline systems and the local 3-D flow patterns should be considered. 展开更多
关键词 hydropower station hydraulic transients compressible water model coupling of 1-d and 3-d methods
原文传递
FORECAST OF WATER TEMPERATURE IN RESERVOIR BASED ON ANALYTICAL SOLUTION 被引量:4
7
作者 JI Shun-wen ZHU Yue-ming +1 位作者 QIANG Sheng ZENG Deng-feng 《Journal of Hydrodynamics》 SCIE EI CSCD 2008年第4期507-513,共7页
The water temperature in reservoirs is difficult to be predicted by numerical simulations. In this article, a statistical model of forecasting the water temperature was proposed. In this model, the 3-D thermal conduct... The water temperature in reservoirs is difficult to be predicted by numerical simulations. In this article, a statistical model of forecasting the water temperature was proposed. In this model, the 3-D thermal conduction-diffusion equations were converted into a system consisting of 2-D equations with the Fourier expansion and some hypotheses. Then the statistical model of forecasting the water temperature was developed based on the analytical solution to the 2-D thermal equations. The~ simplified statistical model can elucidate the main physical mechanism of the temperature variation much more clearly than the numerical simulation with the Navier-Stokes equations. Finally, with the presented statistical model, the distribution of water temperature in the Shangyoujiang reservoir was determined. 展开更多
关键词 water temperature quasi 3-d statistical model thermal conduction-diffusion equation analytical solution regression analysis factor of radiation
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部