Cucumber seedlings were sprayed with different concentrations of LaCl_3 for 3 d continuously. After 7 d of this treatment, the plants were treated with 1200 mg·L^(-1) 2,4-dichlorophennoxy(2,4-D) for 24 h. The lea...Cucumber seedlings were sprayed with different concentrations of LaCl_3 for 3 d continuously. After 7 d of this treatment, the plants were treated with 1200 mg·L^(-1) 2,4-dichlorophennoxy(2,4-D) for 24 h. The leaves were harvested and rinsed with 5 mmol·L^(-1) EDTA. The concentrations of photosynthetic pigments, soluble protein and metabolites related to oxidative stress and the activities of antioxidant enzymes in leaves were assayed. The results show that the treatment with appropriate concentration of LaCl_3 has resistant effect on oxidative stress induced by 2, 4-D. Proper concentration of LaCl_3 promotes the activity of antioxidant system in plants and alleviates the damage caused by 2, 4-D.展开更多
The time-domain BEM was developed to analyze the dynamic stress intensity factor ( DSIF) of 3-D elastodynamic crack problems. To simulate the stress singularity along the front of a crack, eight-node isoparametric sin...The time-domain BEM was developed to analyze the dynamic stress intensity factor ( DSIF) of 3-D elastodynamic crack problems. To simulate the stress singularity along the front of a crack, eight-node isoparametric singular elements were used, and the DSIF for a semi-circular surface crack was firstly calculated based on displacement equation using the time-domain BEM formulation. The new scheme to determine the time step was brought forward. By the dynamic analysis program of time-domain BEM compiled by its, several numerical examples are presented, which demonstrate the unconditional stability and high accuracy of time-domain BEM applied to 3-D elastodynamic crack problems.展开更多
In this study,the interaction between 3-D bedforms and submerged rigid vegetation has been investigated.Various laboratory experiments were conducted to study the distribution of flow velocity,Reynolds shear stress,tu...In this study,the interaction between 3-D bedforms and submerged rigid vegetation has been investigated.Various laboratory experiments were conducted to study the distribution of flow velocity,Reynolds shear stress,turbulent kinetic energy,and skewness coefficients for a constant density of vegetation.Results showed that the velocity profile in the pool section deviates from those in the upstream section of the pool.It has been found that the dip parameter varied between 0.6H and 0.9H depending on various factors including bed roughness,vegetation distribution,and pool entrance/exit slopes.However,scattered vegetation in the pool and differences in slopes created non-uniform flow conditions.Also,in the wake region behind each vegetated element,flow velocity reduced significantly,and small-scale eddies are formed,causing increased perturbations.By decreasing the entrance slope and bed roughness,relatively uniform flow and weaker turbulence was resulted,but the random distribution of vegetated elements counteracted this balance and intensified turbulence.With the decrease in the pool entrance slope,the contribution of sweep event decreased and the contribution of ejection event increased.展开更多
The Shangzhuang altered-rock type gold ore deposit is located in the middle segment of and controlled by the Wang＇ershan fault zone in the northwestern part of the Jiaodong gold province, China. The deformation evolu...The Shangzhuang altered-rock type gold ore deposit is located in the middle segment of and controlled by the Wang＇ershan fault zone in the northwestern part of the Jiaodong gold province, China. The deformation evolution, the structure of strain and stress fields and its ore-controlling effect in the Shangzhuang deposit are discussed in this paper. It is revealed that the deformation evolution has mainly undergone four phases： the early ductile deformation, the second NE-striking horizontal simple shear, the third NE-striking compression-shear and the final NW-striking compression. The mineralization happened during the third stage in which the maximum principal stress gradually transited from NE to NW. The 3-D numerical simulations of the stress field show that, on the condition that the maximum principal stress is NE-striking, the fracture development in the fault zone is favored, while when the maximum principal stress is NW-striking, the fault zone is relatively extensional and it is suitable for the influx and emplacement of ore-forming fluids. The compression-shear strain field during the mineralization is characterized by the λ-type structure, the positive flower structure, etc. Orebodies are mostly equidistantly located in the dilatational spaces, which are distributed in the integral compressional circumstances. And the dilatational spaces are developed where the fault attitude changes or shear joint systems develop. In the overall compression-shear stress field, the strain field bears self-similarity at multiple scales, including the orebody, ore deposit and orefield. The selfsimilarity of the structure comprises the subequidistant distribution of fractures at the same scale and the similar shape of the fractures at various scales. Yet, due to the special geological structure, the orebodies are mostly located in the hanging wall in the Shangzhuang deposit, which is different from most deposits in the Jiaodong gold province. Analyses of the ore-controlling stress and strain fields in the deposit provide an important basis for deposit seeking.展开更多
The Self-Similar Crack Expansion (SSCE) method is used to calculate stress intensity factors for three-dimensional cracks in an infinite medium or semi-infinite medium by the boundary integral element technique, where...The Self-Similar Crack Expansion (SSCE) method is used to calculate stress intensity factors for three-dimensional cracks in an infinite medium or semi-infinite medium by the boundary integral element technique, whereby, the stress intensity factors at crack tips are determined by calculating the crack-opening displacements over the crack surface. For elements on the crack surface, regular integrals and singular integrals are precisely evaluated based on closed form expressions, which improves the accuracy. Examples shaw that this method yields very accurate results for stress intensity factors of penny-shaped cracks and elliptical cracks in the full space, with errors of less than 1% as compared with analytical solutions. The stress intensity factors of subsurface cracks ate in good agreement with other analytical solutions.展开更多
The development of two boundary element algorithms for solving 3-D, frictional, and linear elastostatic contact problems is reported in this paper. The algorithms employ nonconforming discreti- zations for solving 3...The development of two boundary element algorithms for solving 3-D, frictional, and linear elastostatic contact problems is reported in this paper. The algorithms employ nonconforming discreti- zations for solving 3-D boundary element models, which provide much needed flexibility in the bound- ary element modeling for 3-D contact problems. These algorithms are implemented in a new 3-D boundary element code and verified using several examples. For the numerical examples studied, the results using the new boundary element algorithms match very well with the results using a commercial finite element code, and clearly demonstrate the feasibility of the new boundary element approach for 3-D contact analysis.展开更多
提出了一种针对铆接结构进行疲劳寿命评估的新方法。首先,运用弹塑性理论模型求解出铆接造成的铆钉孔周边的残余应力。然后,通过三维弹塑性、接触非线性有限元分析(Finite element method,FEM),计算出载荷传递引起的铆钉孔周围的应力分...提出了一种针对铆接结构进行疲劳寿命评估的新方法。首先,运用弹塑性理论模型求解出铆接造成的铆钉孔周边的残余应力。然后,通过三维弹塑性、接触非线性有限元分析(Finite element method,FEM),计算出载荷传递引起的铆钉孔周围的应力分布。将这两个应力场进行叠加,并将沿径向距离疲劳危险部位应力最大处特定距离的点的应力,对照相关材料的光滑试件S-N曲线进行插值,得到疲劳寿命的评估结果。新方法与应力严重系数法(Stress severity factor,SSF)法进行了对比,并通过试验验证了该方法的可行性和准确性。展开更多
A generalized hend flow model, treating a 90° single bend and 60° continuous hends, was designed to quantitatively describe 3-D turhulenee mechanism of circulating notfully-developed flow in open channels wi...A generalized hend flow model, treating a 90° single bend and 60° continuous hends, was designed to quantitatively describe 3-D turhulenee mechanism of circulating notfully-developed flow in open channels with hends. The 3-D fluctuating veloeities of turbulent flow were measured and analyzed with a 3 D acoustic-Doppler velocimeter. Formula for 3 D turbulent intensity was derived using the dimension analysis approaeh. Expressions of vertical turbulent intensity distributions were obtained with the multivariant-rcgression theo ry, whieh agree with experiment data. Distrihutions of turbulent intensity and turbulent stress were characterized, and their relationships were concluded. In the bend-turbulent flow core region, longitudinal and lateral turbulent-intensity distri hutions are coincident with linear distribution, hut in nearwall region are coincident with the Gamma distribution. Verotical turbulent intensity distributions are coincident with the Rayleigh distribution. Herein, it is concluded that the bend turbulence is anisotropic.展开更多
Fracture processes in ship-building structures are in many cases of a 3-D character. A finite element （FE） model of an all fracture mode （AFM） specimen was built for the study of 3-D mixed mode crack fracture beha...Fracture processes in ship-building structures are in many cases of a 3-D character. A finite element （FE） model of an all fracture mode （AFM） specimen was built for the study of 3-D mixed mode crack fracture behavior including modes Ⅰ,Ⅱ, and Ⅲ. The stress intensity factors （SIFs） were calculated by the modified virtual crack closure integral （MVCCI） method, and the crack initiation angle assessment was based on a recently developed 3-D fracture criterion--the Richard criterion. It was shown that the FE model of the AFM-specimen is applicable for investigations under general mixed mode loading conditions, and the computational results of crack initiation angles are in agreement with some available experimental findings. Thus, the applicability of the FE model of the AFM-specimen for mixed mode loading conditions and the validity of the Richard criterion can be demonstrated.展开更多
A 3-D wave model for the turbulent coherent structures in near-wall region is proposed. The transport nature of the Reynolds stresses and dissipation rate of the turbulence kinetic energy are shown via computation bas...A 3-D wave model for the turbulent coherent structures in near-wall region is proposed. The transport nature of the Reynolds stresses and dissipation rate of the turbulence kinetic energy are shown via computation based on the theoretical model. The mean velocity profile is also computed by using the same theoretical model. The theoretical results are in good agreement with those found from DNS, indicating that the theoretical model proposed can correctly describe the physical mechanism of turbulence in near wall region and it thus possibly opens a new way for turbulence modeling in this region.展开更多
文摘Cucumber seedlings were sprayed with different concentrations of LaCl_3 for 3 d continuously. After 7 d of this treatment, the plants were treated with 1200 mg·L^(-1) 2,4-dichlorophennoxy(2,4-D) for 24 h. The leaves were harvested and rinsed with 5 mmol·L^(-1) EDTA. The concentrations of photosynthetic pigments, soluble protein and metabolites related to oxidative stress and the activities of antioxidant enzymes in leaves were assayed. The results show that the treatment with appropriate concentration of LaCl_3 has resistant effect on oxidative stress induced by 2, 4-D. Proper concentration of LaCl_3 promotes the activity of antioxidant system in plants and alleviates the damage caused by 2, 4-D.
文摘The time-domain BEM was developed to analyze the dynamic stress intensity factor ( DSIF) of 3-D elastodynamic crack problems. To simulate the stress singularity along the front of a crack, eight-node isoparametric singular elements were used, and the DSIF for a semi-circular surface crack was firstly calculated based on displacement equation using the time-domain BEM formulation. The new scheme to determine the time step was brought forward. By the dynamic analysis program of time-domain BEM compiled by its, several numerical examples are presented, which demonstrate the unconditional stability and high accuracy of time-domain BEM applied to 3-D elastodynamic crack problems.
文摘In this study,the interaction between 3-D bedforms and submerged rigid vegetation has been investigated.Various laboratory experiments were conducted to study the distribution of flow velocity,Reynolds shear stress,turbulent kinetic energy,and skewness coefficients for a constant density of vegetation.Results showed that the velocity profile in the pool section deviates from those in the upstream section of the pool.It has been found that the dip parameter varied between 0.6H and 0.9H depending on various factors including bed roughness,vegetation distribution,and pool entrance/exit slopes.However,scattered vegetation in the pool and differences in slopes created non-uniform flow conditions.Also,in the wake region behind each vegetated element,flow velocity reduced significantly,and small-scale eddies are formed,causing increased perturbations.By decreasing the entrance slope and bed roughness,relatively uniform flow and weaker turbulence was resulted,but the random distribution of vegetated elements counteracted this balance and intensified turbulence.With the decrease in the pool entrance slope,the contribution of sweep event decreased and the contribution of ejection event increased.
基金This paper is supported by the National Natural Science Foundation of China （Grant Nos. 40572063 and 40272051）；the Fostering Plan Fund for Trans-Century Excellent Talents and the Project 111 （No. B07011）.
文摘The Shangzhuang altered-rock type gold ore deposit is located in the middle segment of and controlled by the Wang＇ershan fault zone in the northwestern part of the Jiaodong gold province, China. The deformation evolution, the structure of strain and stress fields and its ore-controlling effect in the Shangzhuang deposit are discussed in this paper. It is revealed that the deformation evolution has mainly undergone four phases： the early ductile deformation, the second NE-striking horizontal simple shear, the third NE-striking compression-shear and the final NW-striking compression. The mineralization happened during the third stage in which the maximum principal stress gradually transited from NE to NW. The 3-D numerical simulations of the stress field show that, on the condition that the maximum principal stress is NE-striking, the fracture development in the fault zone is favored, while when the maximum principal stress is NW-striking, the fault zone is relatively extensional and it is suitable for the influx and emplacement of ore-forming fluids. The compression-shear strain field during the mineralization is characterized by the λ-type structure, the positive flower structure, etc. Orebodies are mostly equidistantly located in the dilatational spaces, which are distributed in the integral compressional circumstances. And the dilatational spaces are developed where the fault attitude changes or shear joint systems develop. In the overall compression-shear stress field, the strain field bears self-similarity at multiple scales, including the orebody, ore deposit and orefield. The selfsimilarity of the structure comprises the subequidistant distribution of fractures at the same scale and the similar shape of the fractures at various scales. Yet, due to the special geological structure, the orebodies are mostly located in the hanging wall in the Shangzhuang deposit, which is different from most deposits in the Jiaodong gold province. Analyses of the ore-controlling stress and strain fields in the deposit provide an important basis for deposit seeking.
基金the National Institute of Standards and Technologythe Army Office of Research
文摘The Self-Similar Crack Expansion (SSCE) method is used to calculate stress intensity factors for three-dimensional cracks in an infinite medium or semi-infinite medium by the boundary integral element technique, whereby, the stress intensity factors at crack tips are determined by calculating the crack-opening displacements over the crack surface. For elements on the crack surface, regular integrals and singular integrals are precisely evaluated based on closed form expressions, which improves the accuracy. Examples shaw that this method yields very accurate results for stress intensity factors of penny-shaped cracks and elliptical cracks in the full space, with errors of less than 1% as compared with analytical solutions. The stress intensity factors of subsurface cracks ate in good agreement with other analytical solutions.
文摘The development of two boundary element algorithms for solving 3-D, frictional, and linear elastostatic contact problems is reported in this paper. The algorithms employ nonconforming discreti- zations for solving 3-D boundary element models, which provide much needed flexibility in the bound- ary element modeling for 3-D contact problems. These algorithms are implemented in a new 3-D boundary element code and verified using several examples. For the numerical examples studied, the results using the new boundary element algorithms match very well with the results using a commercial finite element code, and clearly demonstrate the feasibility of the new boundary element approach for 3-D contact analysis.
文摘提出了一种针对铆接结构进行疲劳寿命评估的新方法。首先,运用弹塑性理论模型求解出铆接造成的铆钉孔周边的残余应力。然后,通过三维弹塑性、接触非线性有限元分析(Finite element method,FEM),计算出载荷传递引起的铆钉孔周围的应力分布。将这两个应力场进行叠加,并将沿径向距离疲劳危险部位应力最大处特定距离的点的应力,对照相关材料的光滑试件S-N曲线进行插值,得到疲劳寿命的评估结果。新方法与应力严重系数法(Stress severity factor,SSF)法进行了对比,并通过试验验证了该方法的可行性和准确性。
文摘A generalized hend flow model, treating a 90° single bend and 60° continuous hends, was designed to quantitatively describe 3-D turhulenee mechanism of circulating notfully-developed flow in open channels with hends. The 3-D fluctuating veloeities of turbulent flow were measured and analyzed with a 3 D acoustic-Doppler velocimeter. Formula for 3 D turbulent intensity was derived using the dimension analysis approaeh. Expressions of vertical turbulent intensity distributions were obtained with the multivariant-rcgression theo ry, whieh agree with experiment data. Distrihutions of turbulent intensity and turbulent stress were characterized, and their relationships were concluded. In the bend-turbulent flow core region, longitudinal and lateral turbulent-intensity distri hutions are coincident with linear distribution, hut in nearwall region are coincident with the Gamma distribution. Verotical turbulent intensity distributions are coincident with the Rayleigh distribution. Herein, it is concluded that the bend turbulence is anisotropic.
文摘Fracture processes in ship-building structures are in many cases of a 3-D character. A finite element （FE） model of an all fracture mode （AFM） specimen was built for the study of 3-D mixed mode crack fracture behavior including modes Ⅰ,Ⅱ, and Ⅲ. The stress intensity factors （SIFs） were calculated by the modified virtual crack closure integral （MVCCI） method, and the crack initiation angle assessment was based on a recently developed 3-D fracture criterion--the Richard criterion. It was shown that the FE model of the AFM-specimen is applicable for investigations under general mixed mode loading conditions, and the computational results of crack initiation angles are in agreement with some available experimental findings. Thus, the applicability of the FE model of the AFM-specimen for mixed mode loading conditions and the validity of the Richard criterion can be demonstrated.
基金The authors wish to express their gratitude to Prof.Zhou Heng for detailed and extremely helpful comments on a draft of this paper.This work was supported by the Climbing Program and the National Science Foundation of China(Grant No.59476017)
文摘A 3-D wave model for the turbulent coherent structures in near-wall region is proposed. The transport nature of the Reynolds stresses and dissipation rate of the turbulence kinetic energy are shown via computation based on the theoretical model. The mean velocity profile is also computed by using the same theoretical model. The theoretical results are in good agreement with those found from DNS, indicating that the theoretical model proposed can correctly describe the physical mechanism of turbulence in near wall region and it thus possibly opens a new way for turbulence modeling in this region.
