DPGL:The Direct3D9-based Parallel Graphics Library for Multi-display Environment

The emergence of high performance 3D graphics cards has opened the way to PC clusters for high performance multi- display environment. In order to exploit the rendering ability of PC clusters, we should design appropriate parallel rendering algorithms and parallel graphics library interfaces. Due to the rapid development of Direct3D, we bring forward DPGL, the Direct3D9-based parallel graphics library in D3DPR parallel rendering system, which implements Direct3D9 interfaces to support existing Direct3D9 application parallelization with no modification. Based on the parallelism analysis of Direct3D9 rendering pipeline, we briefly introduce D3DPR parallel rendering system. DPGL is the fundamental component of D3DPR. After presenting DPGL three layers architecture, we discuss the rendering resource interception and management. Finally, we describe the design and implementation of DPGL in detail, including rendering command interception layer, rendering command interpretation layer and rendering resource parallelization layer.

(1-3)-β-D葡聚糖联合降钙素原、CD4^(+)T淋巴细胞多指标在艾滋病患者马尔尼菲篮状菌感染早期诊断临床研究

目的探讨(1-3)-β-D葡聚糖联合降钙素原(procalcitonin,PCT)、CD4^(+)T淋巴细胞多指标在艾滋病患者马尔尼菲篮状菌感染早期诊断临床研究。方法回顾性选取我院2020年1月—2022年6月住院的120例艾滋病患者为研究对象。依据实验室结果,将其分为马尔尼菲篮状菌感染确诊组(血或组织液培育养出马尔尼菲篮状菌),简称A组(62例),及马尔尼菲篮状菌感染临床诊断组[根据临床症状、体征、血常规及(1-3)-β-D葡聚糖、PCT、CD4^(+)T淋巴细胞多指标诊断],简称B组(58例)。检测患者(1-3)-β-D葡聚糖、PCT、CD4^(+)T淋巴细胞的表达水平,采用受试者工作特征(receiver-operating characteristic,ROC)曲线下面积(area under the curve,AUC)评估上述指标联合检测对艾滋病患者感染马尔尼菲篮状菌的诊断效能。结果A组的(1-3)-β-D葡聚糖和PCT水平均高于B组,CD4^(+)T淋巴细胞个数低于B组(P<0.05);(1-3)-β-D葡聚糖、PCT、CD4^(+)T淋巴细胞联合检测的AUC为0.933,(1-3)-β-D葡聚糖单独检测的AUC是0.812,PCT单独检测的AUC为0.883,CD4^(+)T淋巴细胞单独检测的AUC是0.810,(1-3)-β-D葡聚糖、PCT和CD4^(+)T淋巴细胞联合检测的AUC皆优于三项单独检测,表明(1-3)-β-D葡聚糖、PCT和CD4^(+)T淋巴细胞联合检测的诊断价值皆优于单一指标诊断,且联合检测的特异度、约登指数分别为92.43%和0.580,均高于三项单独检测。结论(1-3)-β-D葡聚糖联合PCT和CD4^(+)T淋巴细胞多指标对艾滋病马尔尼菲篮状菌感染具有非常高的临床诊断价值,能够帮助医生分析出高危风险患者,及时制定治疗方案,同时也承担预后效果的判断依据,对治疗艾滋病马尔尼菲篮状菌感染具有非常重要的研究价值。

1例RHD-CE(3-7)-D基因重组与RHCE变异型患者的血清学与分子生物学分析

目的 研究分析1例Rh血型弱D、弱cE患者的血清学与分子生物学特征,为该类患者的临床安全输血提供实验依据。方法 采用微柱凝胶卡法对患者红细胞进行ABO、RhDCcEe抗原的鉴定,同时采用试管法进行血型复核,抗人球蛋白卡法筛查不规则抗体;采用PCR-SSP法对RhDCcEe(RhD、RhC、Rhc、RhE、Rhe)基因型进行检测;三代全长测序技术对RHD/RHCE基因序列进行测序分析。结果 微柱凝胶卡法鉴定ABO、RhD、RhCcEe血型抗原的结果为:A抗原(-)、B抗原(-)、RhD(1+)、RhC(4+)、Rhc(1+)、RhE(1+)、Rhe(4+)、对照孔(-);试管法ABO、RhD、RhCcEe抗原鉴定该患者表型为:A抗原(-)、B抗原(-)、RhD(w+)、RhC(4+)、Rhc(w+)、RhE(w+)、Rhe(4+),对照管(-);抗人球蛋白卡法筛查患者不规则抗体阴性;PCR-SSP法血型基因分型RhDCcEe结果:RhD(+)、RhC(+)、Rhc(+)、RhE(+)、Rhe(+);RHD/RHCE基因结果:RHD单倍体1为外显子1-10全缺失,而单倍体2为外显子RHD-CE基因重组融合,且确认其重组类型为RHD-CE(3-7)-D,起点在外显子2(g.20238-20312之间),终点在外显子8(g49184-50480之间),同时RHCE基因第6外显子存在新碱基点突变RHCE*cE(827C>A)。结论RHD-CE(3-7)-D基因重组融合与RHCE*cE(827C>A)新等位基因突变可能引起D、cE血型抗原弱表达,为临床安全输血提供了重要的实验数据支持。

Highly reliable and selective ethanol sensor based on α-Fe2O3 nanorhombs working in realistic environments

A highly reliable and selective ethanol gas sensor working in realistic environments based on alpha-Fe2O3(α-Fe2O3)nanorhombs is developed. The sensor is fabricated by integrating α-Fe2O3 nanorhombs onto a low power microheater based on micro-electro-mechanical systems(MEMS) technology. The α-Fe2O3 nanorhombs, prepared via a solvothermal method, is characterized by transmission electron microscopy(TEM), Raman spectroscopy, x-ray diffraction(XRD), and x-ray photoelectron spectroscopy(XPS). The sensing performances of the α-Fe2O3 sensor to various toxic gases are investigated. The optimum sensing temperature is found to be about 280℃. The sensor shows excellent selectivity to ethanol.For various ethanol concentrations(1 ppm-20 ppm), the response and recovery times are around 3 s and 15 s at the working temperature of 280℃, respectively. Specifically, the α-Fe2O3 sensor exhibits a response shift less than 6% to ethanol at280℃ when the relative humidity(RH) increases from 30% to 70%. The good tolerance to humidity variation makes the sensor suitable for reliable applications in Internet of Things(IoT) in realistic environments. In addition, the sensor shows great long-term repeatability and stability towards ethanol. A possible gas sensing mechanism is proposed.

基于二萘并[2,3-B∶2′,3′-D]呋喃基团的高效窄发射蓝光OLED器件

高效率窄光谱蓝色有机电致发光器件(OLED)是柔性显示领域的研究重点之一。本文以二萘并[2,3-B∶2′,3′-D]呋喃为弱电子受体、N-(4-联苯基)-1-萘胺作为电子给体设计合成了一种D-A-D型蓝光分子DPF-NA,其在正己烷溶液中的发射峰位于441 nm。理论计算与光物理测试结果显示DPF-NA具有杂化局域电荷转移激发态(HLCT)特性,兼具局域态(LE)高发光效率与电荷转移态(CT)高激子利用率特征,在二氯甲烷溶液中的光致发光量子效率(PLQY)为81.2%。基于质量分数3%DPF-NA掺杂浓度的OLED器件电致发光(EL)峰位于455 nm,半峰宽(FWHM)仅为26 nm,CIE(x,y)坐标为(0.14,0.08),最大外量子效率(EQEmax)为6.76%。

Vitamin D₃Variation between Children and Adults with Reference to Renal Stones, Environment and Urinary Tract Infections

Purpose: A better understanding of urinary tract infection (UTI) and the role of host, bacterial and environmental factors have improved the ability to identify the patients at risk and prevent or minimize sequelae. Kidney stones may be a complicated subject and its etiology is related to diet, increase urinary solutes and colloids in hot weather. Hypercalcaemia produced by taking large doses of vitamin D, creates high blood pressure and calcium deposits that can produce renal and bludder stones in all age groups including children. The objective of the present study was to estimate the serum level of vitamin D among patients particularly children taking treatable vitamin D. Correlation between vitamin D renal stones and UTI was also assessed. Methods: The number of patients studied was 150 collected during 2010 and 2011 in University teaching hospital. Forty two of them were children. The patients under study should have renal stone confirmed by ultrasound examination. Urine, blood and stone samples were taken for relevant laboratory investigations including identification of bacteriuria and its causative agents. Serum ions and vitamin D were also estimated. Type of renal stone collected was chemically identified. Results: One hundred and fifty patients with urolithiasis were included in the present study whose ages ranged from 8 months to 69 years and the ratio of males to females was 1.7:1. The frequency of patients revealed UTI was 52% and 78% of the infected patients were suffered from Gram-negative bacteria particularly Escherichia coli. Renal stones of mixed chemical composition were almost 72% and 78.2% of the stones were infection type. The mean of serum calcium was 2.157 mmol/L. The serum means of vitamin D among children and adults were 50.9 and 31.4 nmol/L respectively and the peak of this vitamin was recorded during summer. Conclusion: The frequency of UTI among urolithiasis patients was greater than that of non-urolithiasis. Enterobacteriaceae was the dominant family causing UTI particularly among females. Urolithiasis was more prevalent in males (62%). Recurrence of urolithiasis was high (39%) which indicated insufficient treatment of the underlying causes. Serum ions concentrations among children and adults were variables. Vitamin D values in children were higher than those estimated among adults and the peak of its overall concentration mean was found during summer (39.7 nmol/L). There was a strong relation between vitamin D level and the incidence of urolithiasis particularly among children with dietary problems.

New 4-imino-4H-Chromeno[2,3-d]Pyrimidin-3(5H)-Amine: Synthesis, Cytotoxic Effects on Tumoral Cell Lines and in Silico ADMET Properties

The synthesis of new 4-imino-4H-chromeno[2,3-d]pyrimidin-3(5H)-amine in four steps including one step under microwave dielectric heating is reported. The structural identity of the synthesized compounds was established according to their spectroscopic analysis, such as FT-IR, NMR and mass spectroscopy. These new compounds were tested for their antiproliferative activities on seven representative human tumoral cell lines (Huh7 D12, Caco2, MDA-MB231, MDA-MB468, HCT116, PC3 and MCF7) and also on fibroblasts. Among them, only the compounds 6c showed micromolar cytotoxic activity on tumor cell lines (1.8 50 50 > 25 μM). Finally, in silico ADMET studies ware performed to investigate the possibility of using of the identified compound 6c as potential anti-tumor compound.

血浆(1-3)-β-D葡聚糖诊断新生儿侵袭性真菌感染的价值

探讨在针对新生儿侵袭性真菌感染的诊断中使用血浆(1-3)-β-D葡聚糖能够产生的诊断效能。方法 选取2021年1月到2022年2月因为侵袭性真菌感染于医院寻求医疗干预的新生儿总共60例作为本次研究的一部分研究对象记为1组;另外选取60例健康婴儿作为2组;统计、对比两组患者的血浆(1-3)-β-D葡聚糖水平、CD4+T淋巴细胞数水平;整理PCR技术针对1组患者诊断结果,将其与血浆(1-3)-β-D葡聚糖诊断侵袭性真菌感染的诊断效能进行对比。结果 研究结果显示1组患者的血浆(1-3)-β-D葡聚糖水平、CD4+T淋巴细胞数水平较之于2组患者存在明显差异,1组患者血浆(1-3)-β-D葡聚糖水平更高,而CD4+T淋巴细胞数水平明显更低;P<0.05。在针对诊断效能的考察上,血浆(1-3)-β-D葡聚糖诊断效能和PCR诊断结果之间在灵敏度、特异度方面差异不大,P>0.05。结论 针对罹患侵袭性真菌感染的新生儿使用血浆(1-3)-β-D葡聚糖进行检查,一定程度上能够确保诊断结果的严谨程度,可使用。

血浆(1,3)-β-D葡聚糖检测在侵袭性真菌感染诊断中的价值分析

研究血浆(1,3)-β-D葡聚糖检测技术(G实验)应用于侵袭性真菌感染(IFI)诊断中的应用价值。方法 选择我院在2023年1月至2024年1月期间收治的100例高危型侵袭型真菌感染患者,应用MB-80微生物快速检测动态系统以及对应的试剂对患者的血浆(1,3)-β-D葡聚糖进行检测,分析真菌培养、G实验和联合检测结果;三种方法的诊断效能;三种方法的ROC曲线。结果 确诊IFI阳性共28例,阴性共72例;联合检测的诊断效能高于真菌培养或者G实验。联合检测面积高于单一检测。结论 在侵袭性真菌感染的诊断中,应用血浆(1,3)-β-D葡聚糖检测,诊断效能良好,在和传统真菌培养技术联合检测下,可进一步提升诊断效能。

INFLUENCE OF ENVIRONMENT ON TENSILE BEHAVIOR OF Ni_3Al SYNTHESIZED UNDER COMPRESSION

Self propagating high temperature synthesis(SHS) under compression was utilized to obtain an intermetallic compound Ni_3 Al by using elemental powders.The microstructure of the SHS product was observed by optical microscopy(OM) and scanning electron microscopy(SEM).The results reveal that the SHS Ni3Al is a single-phase polycrystalline alloy wilh LI2 crystal structure.Tensile tests were conducted from room temperature to 800℃ both in air and in vacuum.The results show that the SHS Ni_3Al exhibits an anomalous temperature dependence of ultimate tensile strength.The ultimate tensile strength in vacuum is much higher than that in air over the whole temperature range.Fracture surfaces are characterized by the brittle grain boundary fracture and the intergranular fracture mode can not be affected markedly by the test environment.

Eu Ions Site-selective Doping and Nonstoichiometric Chemistry of NaTaO3 in Na-rich Environment

The electronic structure of Eu-doped NaTaO3 in Na-rich environment is investigated by the first-principles theory. By simulating the two different models of Eu3＋ ions selectively located in Ta and Na sites, respectively, the band gaps of two Eu-doped NaTaO3 models were all narrowed, which were assigned to lattice defects and impurity band of the Eu dopent. For the model of Eu3＋ ions located in the Na＋ sites of NaTaO3, the new impurity band mainly composited of Eu 4f orbital appeared at the top over the valence band, indicating the enhanced oxidative ability. For the model of Eu3＋ ions located in the Ta5＋ sites of NaTaO3, a midgap state generated was located at the bottom of conduct band and the band potential shifted up, confirming the strong reductive ability in the Na-rich enviornment. The densities of electron states were significantly increased in both the conduction and valence bands in Na-rich model, which resulted in the increased carrier migration rate and thus photocatalytic activity enhancement. It is proposed that Eu3＋ ions doping at the Ta sites could enhance the reduced photocatalytic performance via controlling the nonstoichiometric Na/Ta molar ratio in the Eu-doped NaTaO3 system.

3D Model Construction and Ecological Environment Investigation on a Regional Scale Using UAV Remote Sensing

The acquisition of digital regional-scale information and ecological environmental data has high requirements for structural texture,spatial res-olution,and multiple parameter categories,which is challenging to achieve using satellite remote sensing.Considering the convenient,facilitative,and flexible characteristics of UAV(unmanned air vehicle)remote sensing tech-nology,this study selects a campus as a typical research area and uses the Pegasus D2000 equipped with a D-MSPC2000 multi-spectral camera and a CAM3000 aerial camera to acquire oblique images and multi-spectral data.Using professional software,including Context Capture,ENVI,and ArcGIS,a 3D(three-dimensional)campus model,a digital orthophoto map,and multi-spectral remote sensing map drawing are realized,and the geometric accuracy of typical feature selection is evaluated.Based on a quantitative remote sensing model,the campus ecological environment assessment is performed from the perspectives of vegetation and water body.The results presented in this study could be of great significance to the scientific management and sustainable development of regional natural resources.

Analysis of Remotely Sensed Imagery and Architecture Environment for Modelling 3D Detailed Buildings Using Geospatial Techniques

The use of three-dimensional maps is more effective than two-dimensional maps in representing the Earth’s surface. However, the traditional methods used to create digital surface models are not efficient for capturing the details of Earth’s features. This is because they represent only three-dimensional objects in a single texture and do not provide a realistic representation of the real world. Additionally, there is a growing demand for up-to-date and accurate geo-information, particularly in urban areas. To address this challenge, a new technique is proposed in this study that involves integrating remote sensing, Geographic Information System, and Architecture Environment software to generate a highly-detailed three-dimensional model. The method described in this study includes several steps such as acquiring high-resolution satellite imagery, gathering ground truth data, performing radiometric and geometric corrections during image preprocessing, producing a 2D map of the region of interest, constructing a digital surface model by extending the building outlines, and transforming the model into multi-patch layers to create a 3D model for each object individually. The research findings indicate that the digital surface model obtained with comprehensive information is suitable for different purposes, such as environmental research, urban development and expansion planning, and shape recognition tasks.

Virtual 3D environment for exploring the spatial ability of students

Background Spatial ability is an unique type of intelligence;it can be distinguished from other forms of intelligence and plays an essential role in an individual's success in many academic fields,particular in this era of technology.Instruction-assisted 3D technology can display stereo graphics and promote students'understanding of the geometrical structure and characteristics of graphics.Spatial ability includes several aspects.Few software programs are available for training different aspects of spatial ability for senior high school students.This study aims to explore an effective method for training the spatial ability for senior high school students,and to promote the development of students'independent inquiry ability.Methods First,an inquiry design strategy to improve the spatial ability of students is proposed.Based on this strategy,unity3D was used to develop a 3D inquiry environment that can use leap motion to complete a gesture interaction.Finally,researchers carried out experience-based activities and issued user experience questionnaires to participants to verify the application effect of the spatial ability inquiry environment and used interviews to understand the user experience of participants exploring the leap motion device in a 3D inquiry environment.Results 32 learners participated in the experiment.learners have a high score for perceived usefulness and willingness to use.Compared with the perceived ease of use and perceived usefulness,the average score of the application effect is relatively low.In terms of willingness to use,most of the learners expressed their willingness to use a similar inquiry environment for spatial ability training in the future.Conclusions The spatial ability inquiry environment can help learners better understand different concepts.The users showed a strong willingness to continue using the device.The device also updates the teaching concept to a certain extent and emphasizes the dominant position of a student.

Oxford English 9B Module 2 Unit 3 The environment 听说课教学设计说明

1.设计思路语言学习应以应用为目标,着重培养学生的交际能力,并能解决实际的生活问题。在目前的英语教学里,教师一般会在同一堂课里进行'听'与'说'的技能训练,其中'听'是'说'的前提,'说'是'听'的延伸。在听说课里,听力策略和会话技巧是帮助学生实现交流目的和信息沟通的桥梁,这也是教学设计的重点。2.教材分析本课的内容是牛津英语9B Module 2 Unit 3 The environment的听说课。

深部真菌感染患者血浆1-3-β-D葡聚糖检测的临床意义

目的探讨深部真菌感染患者血浆1-3-β-D葡聚糖检测的临床意义。方法 应用ME-80微生物动态快速 检测系统,及GKT-5M Set动态真菌检测试剂盒定量检测血浆中1-3-β-D葡聚糖的含量。结果正常对照组血浆 1-3-β-D葡聚糖含量为(2.83士2.57)μg／L;深部真菌感染组为(54.06士36.13)μg／L,经t检验分析,对照组与深部 真菌感染组1-3-β-D葡聚糖平均值差异非常显著(t=7.741,P<0.001)。结论 血浆葡聚糖检测可在拟诊早期为 临床医生提供机体是否感染真菌的可靠信息,是一种实用的真菌感染早期诊断方法。

三乙基苄基氯化铵催化下水介质中吡喃并[2，3-d]嘧啶衍生物的一步合成

以芳亚甲基丙二腈、1,3-二甲基巴比妥酸为原料,以水为溶剂,在100℃以三乙基苄基氯化铵(TEBAC)为催化剂合成了一系列的吡喃并[2,3-d]嘧啶衍生物,该方法具有反应条件温和,产率良好(78%～90%)和环境友好等优点.产物的结构通过IR,1H NMR和元素分析表征,并进一步通过X射线衍射分析确证.

基于小波变换的显微图像清晰度评价函数及3-D自动调焦技术

提出了基于小波变换的图像清晰度评价函数。采用大NA(数值孔径)和小NA的显微图像序列,比较分析了本文提出的评价函数和经典的归一化方差函数、熵函数、能量拉普拉斯函数以及另外两种基于小波变换评价函数的清晰度评价性能。同时采用带有标准偏差为25的高斯噪声显微图像序列,比较了这五种评价函数的抗噪能力。实验结果表明:提出的评价函数具有最高的聚焦精度和聚焦分辨率,且具有与抗噪能力最强的归一化方差函数相当的抗噪能力。提出了基于区域选择的自动聚焦方法,实现了处于不同深度的微操作对象的3-D自动聚焦。该评价函数和区域选择聚焦技术可以用于高精度的自动微操作作业中。进一步说明自动调焦是实现自动化微操作的关键技术,而其核心是清晰度评价函数的选取或构建。

3-D颞骨模型的制作与应用

目的探讨利用粉末堆积打印技术制作的高仿真3-D颞骨模型在解剖技能训练及模拟手术中的应用。方法利用高分辨率CT获取活体颞骨断层图像(正常人2例,慢性中耳炎患者2例),数据导入Mimics软件行图像分割及颞骨三维重建,以石膏粉末为原料,利用粉末堆积快速成型技术打印出颞骨模型,重要解剖结构与组织(听骨链、面神经、位听器、炎性渗出及胆脂瘤等)以不同颜色打印,并在显微镜下进行手术演练。结果颞骨模型的硬度与人骨相近,模型表面及内部骨性标志明显,解剖精确度高,钻磨触感接近真实,满足颞骨解剖技能训练及模拟手术的要求。结论利用粉末堆积打印技术能制作出仿真度更高、更接近实际人体解剖结构的颞骨模型,帮助临床医生在术前全面了解患者的颞骨及周围组织解剖结构与病变情况,制定和优化手术方案,减少并发症。

4-(对取代苯基)-2-[2-(取代苯基)呋喃-4-甲酰胺]-1',3',4'-均三唑[1,2-d]-1,3,4-噻二唑类衍生物的合成和生物活性

以1-氨基-5-巯基-2-(对取代苯基)-1,3,4-均三唑和5-取代苯基-2-呋喃甲酰异硫氰酸酯为原料,合成了10个未见文献报道的含苯环连呋喃的均三唑并噻二唑类衍生物,通过元素分析,1HNMR,IR和MS确定化合物的结构,初步生物活性测试表明标题化合物具有一定的除草活性.