(1-3)-β-D葡聚糖联合降钙素原、CD4^(+)T淋巴细胞多指标在艾滋病患者马尔尼菲篮状菌感染早期诊断临床研究

目的探讨(1-3)-β-D葡聚糖联合降钙素原(procalcitonin,PCT)、CD4^(+)T淋巴细胞多指标在艾滋病患者马尔尼菲篮状菌感染早期诊断临床研究。方法回顾性选取我院2020年1月—2022年6月住院的120例艾滋病患者为研究对象。依据实验室结果,将其分为马尔尼菲篮状菌感染确诊组(血或组织液培育养出马尔尼菲篮状菌),简称A组(62例),及马尔尼菲篮状菌感染临床诊断组[根据临床症状、体征、血常规及(1-3)-β-D葡聚糖、PCT、CD4^(+)T淋巴细胞多指标诊断],简称B组(58例)。检测患者(1-3)-β-D葡聚糖、PCT、CD4^(+)T淋巴细胞的表达水平,采用受试者工作特征(receiver-operating characteristic,ROC)曲线下面积(area under the curve,AUC)评估上述指标联合检测对艾滋病患者感染马尔尼菲篮状菌的诊断效能。结果A组的(1-3)-β-D葡聚糖和PCT水平均高于B组,CD4^(+)T淋巴细胞个数低于B组(P<0.05);(1-3)-β-D葡聚糖、PCT、CD4^(+)T淋巴细胞联合检测的AUC为0.933,(1-3)-β-D葡聚糖单独检测的AUC是0.812,PCT单独检测的AUC为0.883,CD4^(+)T淋巴细胞单独检测的AUC是0.810,(1-3)-β-D葡聚糖、PCT和CD4^(+)T淋巴细胞联合检测的AUC皆优于三项单独检测,表明(1-3)-β-D葡聚糖、PCT和CD4^(+)T淋巴细胞联合检测的诊断价值皆优于单一指标诊断,且联合检测的特异度、约登指数分别为92.43%和0.580,均高于三项单独检测。结论(1-3)-β-D葡聚糖联合PCT和CD4^(+)T淋巴细胞多指标对艾滋病马尔尼菲篮状菌感染具有非常高的临床诊断价值,能够帮助医生分析出高危风险患者,及时制定治疗方案,同时也承担预后效果的判断依据,对治疗艾滋病马尔尼菲篮状菌感染具有非常重要的研究价值。

1例RHD-CE(3-7)-D基因重组与RHCE变异型患者的血清学与分子生物学分析

目的 研究分析1例Rh血型弱D、弱cE患者的血清学与分子生物学特征,为该类患者的临床安全输血提供实验依据。方法 采用微柱凝胶卡法对患者红细胞进行ABO、RhDCcEe抗原的鉴定,同时采用试管法进行血型复核,抗人球蛋白卡法筛查不规则抗体;采用PCR-SSP法对RhDCcEe(RhD、RhC、Rhc、RhE、Rhe)基因型进行检测;三代全长测序技术对RHD/RHCE基因序列进行测序分析。结果 微柱凝胶卡法鉴定ABO、RhD、RhCcEe血型抗原的结果为:A抗原(-)、B抗原(-)、RhD(1+)、RhC(4+)、Rhc(1+)、RhE(1+)、Rhe(4+)、对照孔(-);试管法ABO、RhD、RhCcEe抗原鉴定该患者表型为:A抗原(-)、B抗原(-)、RhD(w+)、RhC(4+)、Rhc(w+)、RhE(w+)、Rhe(4+),对照管(-);抗人球蛋白卡法筛查患者不规则抗体阴性;PCR-SSP法血型基因分型RhDCcEe结果:RhD(+)、RhC(+)、Rhc(+)、RhE(+)、Rhe(+);RHD/RHCE基因结果:RHD单倍体1为外显子1-10全缺失,而单倍体2为外显子RHD-CE基因重组融合,且确认其重组类型为RHD-CE(3-7)-D,起点在外显子2(g.20238-20312之间),终点在外显子8(g49184-50480之间),同时RHCE基因第6外显子存在新碱基点突变RHCE*cE(827C>A)。结论RHD-CE(3-7)-D基因重组融合与RHCE*cE(827C>A)新等位基因突变可能引起D、cE血型抗原弱表达,为临床安全输血提供了重要的实验数据支持。

基于二萘并[2,3-B∶2′,3′-D]呋喃基团的高效窄发射蓝光OLED器件

高效率窄光谱蓝色有机电致发光器件(OLED)是柔性显示领域的研究重点之一。本文以二萘并[2,3-B∶2′,3′-D]呋喃为弱电子受体、N-(4-联苯基)-1-萘胺作为电子给体设计合成了一种D-A-D型蓝光分子DPF-NA,其在正己烷溶液中的发射峰位于441 nm。理论计算与光物理测试结果显示DPF-NA具有杂化局域电荷转移激发态(HLCT)特性,兼具局域态(LE)高发光效率与电荷转移态(CT)高激子利用率特征,在二氯甲烷溶液中的光致发光量子效率(PLQY)为81.2%。基于质量分数3%DPF-NA掺杂浓度的OLED器件电致发光(EL)峰位于455 nm,半峰宽(FWHM)仅为26 nm,CIE(x,y)坐标为(0.14,0.08),最大外量子效率(EQEmax)为6.76%。

New 4-imino-4H-Chromeno[2,3-d]Pyrimidin-3(5H)-Amine: Synthesis, Cytotoxic Effects on Tumoral Cell Lines and in Silico ADMET Properties

The synthesis of new 4-imino-4H-chromeno[2,3-d]pyrimidin-3(5H)-amine in four steps including one step under microwave dielectric heating is reported. The structural identity of the synthesized compounds was established according to their spectroscopic analysis, such as FT-IR, NMR and mass spectroscopy. These new compounds were tested for their antiproliferative activities on seven representative human tumoral cell lines (Huh7 D12, Caco2, MDA-MB231, MDA-MB468, HCT116, PC3 and MCF7) and also on fibroblasts. Among them, only the compounds 6c showed micromolar cytotoxic activity on tumor cell lines (1.8 50 50 > 25 μM). Finally, in silico ADMET studies ware performed to investigate the possibility of using of the identified compound 6c as potential anti-tumor compound.

血浆(1-3)-β-D葡聚糖诊断新生儿侵袭性真菌感染的价值

探讨在针对新生儿侵袭性真菌感染的诊断中使用血浆(1-3)-β-D葡聚糖能够产生的诊断效能。方法 选取2021年1月到2022年2月因为侵袭性真菌感染于医院寻求医疗干预的新生儿总共60例作为本次研究的一部分研究对象记为1组;另外选取60例健康婴儿作为2组;统计、对比两组患者的血浆(1-3)-β-D葡聚糖水平、CD4+T淋巴细胞数水平;整理PCR技术针对1组患者诊断结果,将其与血浆(1-3)-β-D葡聚糖诊断侵袭性真菌感染的诊断效能进行对比。结果 研究结果显示1组患者的血浆(1-3)-β-D葡聚糖水平、CD4+T淋巴细胞数水平较之于2组患者存在明显差异,1组患者血浆(1-3)-β-D葡聚糖水平更高,而CD4+T淋巴细胞数水平明显更低;P<0.05。在针对诊断效能的考察上,血浆(1-3)-β-D葡聚糖诊断效能和PCR诊断结果之间在灵敏度、特异度方面差异不大,P>0.05。结论 针对罹患侵袭性真菌感染的新生儿使用血浆(1-3)-β-D葡聚糖进行检查,一定程度上能够确保诊断结果的严谨程度,可使用。

血浆(1,3)-β-D葡聚糖检测在侵袭性真菌感染诊断中的价值分析

研究血浆(1,3)-β-D葡聚糖检测技术(G实验)应用于侵袭性真菌感染(IFI)诊断中的应用价值。方法 选择我院在2023年1月至2024年1月期间收治的100例高危型侵袭型真菌感染患者,应用MB-80微生物快速检测动态系统以及对应的试剂对患者的血浆(1,3)-β-D葡聚糖进行检测,分析真菌培养、G实验和联合检测结果;三种方法的诊断效能;三种方法的ROC曲线。结果 确诊IFI阳性共28例,阴性共72例;联合检测的诊断效能高于真菌培养或者G实验。联合检测面积高于单一检测。结论 在侵袭性真菌感染的诊断中,应用血浆(1,3)-β-D葡聚糖检测,诊断效能良好,在和传统真菌培养技术联合检测下,可进一步提升诊断效能。

Sound speed profiles in high spatiotemporal resolution using multigrid three-dimensional variational method:a coastal experiment off northern Shandong Peninsula

It is essential to ac quire sound speed profiles(SSPs)in high-precision spatiotemporal resolution for undersea acoustic activities.However,conventional observation methods cannot obtain high-resolution SSPs.Besides,S SPs are complex and changeable in time and space,especially in coastal areas.We proposed a new space-time multigrid three-dimensional variational method with weak constraint term(referred to as STC-MG3DVar)to construct high-precision spatiotemporal resolution SSPs in coastal areas,in which sound velocity is defined as the analytical variable,and the Chen-Millero sound velocity empirical formula is introduced as a weak constraint term into the cost function of the STC-MG3DVar.The spatiotemporal correlation of sound velocity observations is taken into account in the STC-MG3DVar method,and the multi-scale information of sound velocity observations from long waves to short waves can be successively extracted.The weak constraint term can optimize sound velocity by the physical relationship between sound velocity and temperature-salinity to obtain more reasonable and accurate SSPs.To verify the accuracy of the STC-MG3DVar,SSPs observations and CTD observations(temperature observations,salinity observations)are obtained from field experiments in the northern coastal area of the Shandong Peninsula.The average root mean square error(RMSE)of the STC-MG3DVar-constructed SSPs is 0.132 m/s,and the STC-MG3DVar method can improve the SSPs construction accuracy over the space-time multigrid 3DVar without weak constraint term(ST-MG3DVar)by 10.14%and over the spatial multigrid 3DVar with weak constraint term(SC-MG3DVar)by 44.19%.With the advantage of the constraint term and the spatiotemporal correlation information,the proposed STC-MG3DVar method works better than the ST-MG3DVar and the SCMG3DVar in constructing high-precision spatiotemporal re solution SSPs.

Depth Profile Study of Electroless Deposited Sb2S3 Thin Films Using XPS for Photovoltaic Applications

Sb2S3 has gained tremendous research recently for thin film solar cell absorber material because of their easy synthesis, unique electrical and optical properties. The stoichiometry and composition of electroless Sb2S3 thin films were analyzed using XPS depth profile studies. The surface layers were found nearly stoichiometric. On the other hand, the inner layer was rich in antimony composition making it more conductive electrically.

XPS Depth Profile Study of Sprayed Ga2O3 Thin Films

Ga2O3 thin films were fabricated by spray pyrolysis method using gallium acetylacetonate as source material and water as oxidizer. The films were annealed at 450°C for 60 minutes in argon atmosphere. X-ray photoelectron spectroscopy (XPS) depth profile studies were carried out to analyze the stoichiometry and composition of sprayed as-deposited and annealed Ga2O3 thin films. Surface layers and the inner layers of as-deposited and annealed films were found nearly stoichiometric.

GE Signa Profile Platinum3磁共振故障分析与维修

本款设备主要构成部分是IPS、SRU、OC、table、magnet。其中IPS和OC在操作室 ,table和magnet在扫描室 ,由于扫描室必须磁屏蔽 ,两者之间的信号传输通过SRU连接。由于本机在安装时受到房屋装修的影响 ,故障较多 ,本文将举两例故障现象及其分析 。

3~6岁儿童同胞关系的异质性及其影响因素:基于潜在剖面分析

运用潜在剖面分析探索3~6岁儿童同胞关系的不同特征模式,并且进一步探讨个体心理理论与亲子关系对儿童早期同胞关系类型的影响。采用同胞行为量表、社会理解量表、亲子关系量表对1410名二孩家庭的3~6岁儿童进行调查,结果发现:(1)儿童同胞关系可以分为磨合成长型(48.94%)、相对和谐型(47.09%)和矛盾冲突型(3.97%)三种类型;(2)儿童个体心理理论以及亲子关系亲密性越高,亲子关系冲突性越低,其同胞关系类型更倾向归属于相对和谐型。

Parallel computing approach for efficient 3-D X-ray-simulated image reconstruction

Accurate 3-dimensional(3-D)reconstruction technology for nondestructive testing based on digital radiography(DR)is of great importance for alleviating the drawbacks of the existing computed tomography(CT)-based method.The commonly used Monte Carlo simulation method ensures well-performing imaging results for DR.However,for 3-D reconstruction,it is limited by its high time consumption.To solve this problem,this study proposes a parallel computing method to accelerate Monte Carlo simulation for projection images with a parallel interface and a specific DR application.The images are utilized for 3-D reconstruction of the test model.We verify the accuracy of parallel computing for DR and evaluate the performance of two parallel computing modes-multithreaded applications(G4-MT)and message-passing interfaces(G4-MPI)-by assessing parallel speedup and efficiency.This study explores the scalability of the hybrid G4-MPI and G4-MT modes.The results show that the two parallel computing modes can significantly reduce the Monte Carlo simulation time because the parallel speedup increment of Monte Carlo simulations can be considered linear growth,and the parallel efficiency is maintained at a high level.The hybrid mode has strong scalability,as the overall run time of the 180 simulations using 320 threads is 15.35 h with 10 billion particles emitted,and the parallel speedup can be up to 151.36.The 3-D reconstruction of the model is achieved based on the filtered back projection(FBP)algorithm using 180 projection images obtained with the hybrid G4-MPI and G4-MT.The quality of the reconstructed sliced images is satisfactory because the images can reflect the internal structure of the test model.This method is applied to a complex model,and the quality of the reconstructed images is evaluated.

血清25-羟维生素-D3 超敏C反应蛋白及心电图参数与ST段抬高型心肌梗死患者介入治疗后发生恶性心律失常的关系

目的:探讨血清25-羟维生素-D3(25-hydroxyvitamin D3,25-(OH)-D3)、超敏C反应蛋白(High sensitivity C-reactive protein,hs-CRP)、心电图参数变化与ST段抬高型心肌梗死(ST segment elevation myocardial infarction,STEMI)患者经皮冠脉介入术(Percutaneous coronary intervention,PCI)后发生恶性心律失常的关系。方法:选取我院2020年1月至2022年6月实施PCI治疗的193例STEMI患者作为研究对象,根据患者术后72h内是否发生恶性心律失常分为心律失常组38例、对照组155例,对比两组患者入院12h内的25-(OH)-D3、hs-CRP、血清电解质、血常规指标、血脂指标、心肌酶学指标,并对患者PCI术后实施连续动态心电图监测,对比两组患者心电图碎裂QRS波、校正Tp-e间期(Corrected Tp-e interval,Tp-ec)、QT离散度(QT dispersion,Qtd),并采用Logistic回归模型分析上述指标与STEMI患者PCI术后发生恶性心律失常的关系。结果:心律失常组患者的血清25-(OH)-D3水平低于对照组,心律失常组患者的血清hs-CRP、Tp-ec测定值、Qtd测定值、碎裂QRS波检出率均高于对照组,上述指标组间差异均具有统计学意义(P<0.05);心律失常组患者的白细胞(White blood cell,WBC)、肌钙蛋白I(Troponin I,cTnI)、肌酸激酶同工酶(Creatine kinase isoenzyme,CK-MB)、肌红蛋白(Myoglobin,MYO)、K+、Mg 2+水平均高于对照组患者,差异具有统计学意义(P<0.05);Logistic回归模型结果显示:cTnI、CK-MB、K+、hs-CRP、Tp-ec、Qtd增高,碎裂QRS波阳性会显著增大STEMI患者PCI后发生恶性心律失常的风险(P<0.05);血清25-(OH)-D3水平增高会降低STEMI患者PCI后发生恶性心律失常的风险(P<0.05)。结论:STEMI患者血清25-(OH)-D3水平降低、hs-CRP增高、PCI术后Tp-ec、Qtd增高、出现碎裂QRS波会增大患者出现恶性心律失常的风险。

Fe_(3)O_(4)/BiOBr/BiOI的制备及降解2,4-D的性能研究

采用水热法制备了微米球花状结构的Fe_(3)O_(4)/BiOBr/BiOI复合材料,通过SEM、XRD、XPS和UV-Vis等手段对催化剂进行表征分析。结果表明,该催化剂对2,4-D具有高效的光降解性能和光催化效率(80 min,88%)。降解速率常数为2.498×10^(-2)min^(-1),分别是Br∶I=5∶5(K=2.004×10^(-2)min^(-1))、BiOBr(K=1.289×10^(-2)min^(-1))和BiOI(K=6.98×10-3min-1)的1.25倍、1.94倍与3.58倍。这是由于Fe_(3)O_(4)/BiOBr/BiOI复合材料内部形成了异质结,利于光生载流子的分离。此外,5次循环实验后,降解效率保持在82.9%,证明该催化剂稳定、可回收、可磁分离。

准连续c切Er,Yb:YAl_(3)(BO_(3))_(4)激光器的偏振操控

通过构建谐振腔模型,分析了各向同性固体激光器中两个本征模式相干叠加后的光斑奇异特征。并且实验验证了在不使用任何特定的腔内光学偏振选择元件的情况下,在二极管泵浦的准连续c切Er,Yb:YAl_(3)(BO_(3))_(4)激光器中可以有效操控1.6μm输出激光的偏振态。实现了从部分偏振态转化成稳定的线偏振态,其线偏振方向为可切换的正交特殊情况,均具有21 dB的偏振消光比。同时通过光斑对比,验证了激光器的线偏振输出来源于两个正交本征模式的相干叠加。文中为c切Er,Yb:YAl_(3)(BO_(3))_(4)激光器线偏振光的直接输出与偏振态的调控提供了可靠的方案。

Building 3-D Human Data Based on Handed Measurement and CNN

3-dimension(3-D)printing technology is growing strongly with many applications,one of which is the garment industry.The application of human body models to the garment industry is necessary to respond to the increasing personalization demand and still guarantee aesthetics.This paper proposes amethod to construct 3-D human models by applying deep learning.We calculate the location of the main slices of the human body,including the neck,chest,belly,buttocks,and the rings of the extremities,using pre-existing information.Then,on the positioning frame,we find the key points(fixed and unaltered)of these key slices and update these points tomatch the current parameters.To add points to a star slice,we use a deep learning model tomimic the form of the human body at that slice position.We use interpolation to produce sub-slices of different body sections based on the main slices to create complete body parts morphologically.We combine all slices to construct a full 3-D representation of the human body.

3D surface profile diagnosis using digital image processing for laboratory use

The measurement of the surface quality and the profile preciseness is major issues in many industrial branches such that the surface quality of semi products directly affects the subsequent production steps.Although,there are many ways to obtain required data,the hardware necessary for the measurements such as 2D or 3D scanners,depending on the problem’s complexity,is too expensive.Therefore,in this paper,what we put forward as a novelty is an algorithm which is verified on the model of simple 3D scanner on the image processing basis with the resolution of 0.1 mm.There are many ways to scan surface profile;however,the image processing currently is the most trending topic in industry automation.Most importantly,in order to obtain surface images,standard high resolution reflex camera is used and thus the post processing could be realized with MatLab as the software environment.Therefore,this solution is an alternative to the expensive scanners,and single-purpose devices could be extended by many additional functions.

Design of Cylindrical Cam with Oscillating Follower Based on 3D Expansion of Planar Profile Model

Cylindrical cam with oscillating follower is widely applicable and used in many mechanical devices and machines. However, a common error exists in the methods of designing planar profile for oscillating follower cylinder cam. In this study, we propose a new hypothesis to solve this design problem with the inclusion of deviation angle. On the basis of this new concept, equations for planar profile expansion and methods of calculating pressure angle are deduced by applying 3D expansion formula of the follower＇s motion orbit. When the pressure angle is less than allowable value, the minimum base radius can be determined by using MATLAB software. Accordingly, the planar profile of oscillating follower cylinder cam is generated by CAD software. This new method is practical and can be easily adopted for the design of oscillating follower cylindrical cam with desirable accuracy. We applied the method in the design of cylindrical cam for paper feeding mechanism used in high-speed printers. We calculated the planar profile and used it to direct the NC machine for the manufacture of the groove of cylindrical cam. The improved cylindrical cam met all of the requirements of speed and accuracy demanded by high-speed printers. Therefore, our new method has been validated by practical application.

Conical Sonic-Supersonic Solutions for the 3-D Steady Full Euler Equations

This paper concerns the sonic-supersonic structures of the transonic crossflow generated by the steady supersonic flow past an infinite cone of arbitrary cross section.Under the conical assumption,the three-dimensional(3-D)steady Euler equations can be projected onto the unit sphere and the state of fluid can be characterized by the polar and azimuthal angles.Given a segment smooth curve as a conical-sonic line in the polar-azimuthal angle plane,we construct a classical conical-supersonic solution near the curve under some reasonable assumptions.To overcome the difficulty caused by the parabolic degeneracy,we apply the characteristic decomposition technique to transform the Euler equations into a new degenerate hyperbolic system in a partial hodograph plane.The singular terms are isolated from the highly nonlinear complicated system and then can be handled successfully.We establish a smooth local solution to the new system in a suitable weighted metric space and then express the solution in terms of the original variables.

Adaptive Window Based 3-D Feature Selection for Multispectral Image Classification Using Firefly Algorithm

Feature extraction is the most critical step in classification of multispectral image.The classification accuracy is mainly influenced by the feature sets that are selected to classify the image.In the past,handcrafted feature sets are used which are not adaptive for different image domains.To overcome this,an evolu-tionary learning method is developed to automatically learn the spatial-spectral features for classification.A modified Firefly Algorithm(FA)which achieves maximum classification accuracy with reduced size of feature set is proposed to gain the interest of feature selection for this purpose.For extracting the most effi-cient features from the data set,we have used 3-D discrete wavelet transform which decompose the multispectral image in all three dimensions.For selecting spatial and spectral features we have studied three different approaches namely overlapping window(OW-3DFS),non-overlapping window(NW-3DFS)adaptive window cube(AW-3DFS)and Pixel based technique.Fivefold Multiclass Support Vector Machine(MSVM)is used for classification purpose.Experiments con-ducted on Madurai LISS IV multispectral image exploited that the adaptive win-dow approach is used to increase the classification accuracy.