In this paper,we offer a review of type-3 fuzzy logic systems and their applications in control.The main objective of this work is to observe and analyze in detail the applications in the control area using type-3 fuz...In this paper,we offer a review of type-3 fuzzy logic systems and their applications in control.The main objective of this work is to observe and analyze in detail the applications in the control area using type-3 fuzzy logic systems.In this case,we review their most important applications in control and other related topics with type-3 fuzzy systems.Intelligent algorithms have been receiving increasing attention in control and for this reason a review in this area is important.This paper reviews the main applications that make use of Intelligent Computing methods.Specifically,type-3 fuzzy logic systems.The aim of this research is to be able to appreciate,in detail,the applications in control systems and to point out the scientific trends in the use of Intelligent Computing techniques.This is done with the construction and visualization of bibliometric networks,developed with VosViewer Software,which it is a free Java-based program,mainly intended to be used for analyzing and visualizing bibliometric networks.With this tool,we can create maps of publications,authors,or journals based on a co-citation network or construct maps of keywords,countries based on a co-occurrence networks,research groups,etc.展开更多
目的探讨(1-3)-β-D葡聚糖联合降钙素原(procalcitonin,PCT)、CD4^(+)T淋巴细胞多指标在艾滋病患者马尔尼菲篮状菌感染早期诊断临床研究。方法回顾性选取我院2020年1月—2022年6月住院的120例艾滋病患者为研究对象。依据实验室结果,将...目的探讨(1-3)-β-D葡聚糖联合降钙素原(procalcitonin,PCT)、CD4^(+)T淋巴细胞多指标在艾滋病患者马尔尼菲篮状菌感染早期诊断临床研究。方法回顾性选取我院2020年1月—2022年6月住院的120例艾滋病患者为研究对象。依据实验室结果,将其分为马尔尼菲篮状菌感染确诊组(血或组织液培育养出马尔尼菲篮状菌),简称A组(62例),及马尔尼菲篮状菌感染临床诊断组[根据临床症状、体征、血常规及(1-3)-β-D葡聚糖、PCT、CD4^(+)T淋巴细胞多指标诊断],简称B组(58例)。检测患者(1-3)-β-D葡聚糖、PCT、CD4^(+)T淋巴细胞的表达水平,采用受试者工作特征(receiver-operating characteristic,ROC)曲线下面积(area under the curve,AUC)评估上述指标联合检测对艾滋病患者感染马尔尼菲篮状菌的诊断效能。结果A组的(1-3)-β-D葡聚糖和PCT水平均高于B组,CD4^(+)T淋巴细胞个数低于B组(P<0.05);(1-3)-β-D葡聚糖、PCT、CD4^(+)T淋巴细胞联合检测的AUC为0.933,(1-3)-β-D葡聚糖单独检测的AUC是0.812,PCT单独检测的AUC为0.883,CD4^(+)T淋巴细胞单独检测的AUC是0.810,(1-3)-β-D葡聚糖、PCT和CD4^(+)T淋巴细胞联合检测的AUC皆优于三项单独检测,表明(1-3)-β-D葡聚糖、PCT和CD4^(+)T淋巴细胞联合检测的诊断价值皆优于单一指标诊断,且联合检测的特异度、约登指数分别为92.43%和0.580,均高于三项单独检测。结论(1-3)-β-D葡聚糖联合PCT和CD4^(+)T淋巴细胞多指标对艾滋病马尔尼菲篮状菌感染具有非常高的临床诊断价值,能够帮助医生分析出高危风险患者,及时制定治疗方案,同时也承担预后效果的判断依据,对治疗艾滋病马尔尼菲篮状菌感染具有非常重要的研究价值。展开更多
Dose-dense chemotherapy is the preferred first-line therapy for triple-negative breast cancer(TNBC),a highly aggressive disease with a poor prognosis.This treatment uses the same drug doses as conventional chemotherap...Dose-dense chemotherapy is the preferred first-line therapy for triple-negative breast cancer(TNBC),a highly aggressive disease with a poor prognosis.This treatment uses the same drug doses as conventional chemotherapy but with shorter dosing intervals,allowing for promising clinical outcomes with intensive treatment.However,the frequent systemic administration used for this treatment results in systemic toxicity and low patient compliance,limiting therapeutic efficacy and clinical benefit.Here,we report local dose-dense chemotherapy to treat TNBC by implanting 3D printed devices with timeprogrammed pulsatile release profiles.The implantable device can control the time between drug releases based on its internal microstructure design,which can be used to control dose density.The device is made of biodegradable materials for clinical convenience and designed for minimally invasive implantation via a trocar.Dose density variation of local chemotherapy using programmable release enhances anti-cancer effects in vitro and in vivo.Under the same dose density conditions,device-based chemotherapy shows a higher anticancer effect and less toxic response than intratumoral injection.We demonstrate local chemotherapy utilizing the implantable device that simulates the drug dose,number of releases,and treatment duration of the dose-dense AC(doxorubicin and cyclophosphamide)regimen preferred for TNBC treatment.Dose density modulation inhibits tumor growth,metastasis,and the expression of drug resistance-related proteins,including p-glycoprotein and breast cancer resistance protein.To the best of our knowledge,local dose-dense chemotherapy has not been reported,and our strategy can be expected to be utilized as a novel alternative to conventional therapies and improve anti-cancer efficiency.展开更多
Objective: This study was to investigate the role of hsa-miR-155-3p and hsa-miR-155-5p as biomarkers and regulators of biological behavior in Systemic Sclerosis. Methods: A total of 10 SSc patients and 10 healthy cont...Objective: This study was to investigate the role of hsa-miR-155-3p and hsa-miR-155-5p as biomarkers and regulators of biological behavior in Systemic Sclerosis. Methods: A total of 10 SSc patients and 10 healthy controls were selected for the study. The expression levels of hsa-miR-155-3p and hsa-miR-155-5p in peripheral blood mononuclear cells of SSc patients and healthy controls were measured using RT-qPCR. The diagnostic value of these miRNAs was explored using Receiver Operating Characteristic curve analysis. Pearson or Spearman correlation analysis was performed to assess the correlation between miRNAs and clinical indicators in SSc patients. Potential target genes of hsa-miR-155-3p and hsa-miR-155-5p were predicted using miRDB, Targetscan, and miRDIP databases. GO functional annotation, KEGG pathway enrichment analysis, protein-protein interaction network construction, and selection of central genes were conducted. Results: The expression levels of hsa-miR-155-3p and hsa- miR-155-5p were significantly higher in PBMCs of SSc patients compared to healthy controls (P<0.001). The ROC curve analysis showed that hsa-miR-155-3p and hsa-miR-155-5p had a high diagnostic value for SSc (AUC=1, P<0.001). Correlation analysis revealed that hsa- miR-155-3p, hsa-miR-155-5p, and clinical indicators such as high-resolution CT, neutrophil percentage, lymphocyte percentage, and albumin to globulin ratio were correlated (P<0.05). The signaling pathways enriched with target genes of hsa-miR-155-3p and hsa-miR-155- 5p were closely associated with the occurrence and development of SSc fibrosis, immunity, and inflammation. Conclusions: hsa-miR-155-3p and hsa-miR-155-5p may be involved in regulating the occurrence and development of SSc fibrosis, immunity, and inflammation. They have the potential to serve as biomarkers for clinical diagnosis and treatment of SSc.展开更多
The synthesis of new 4-imino-4H-chromeno[2,3-d]pyrimidin-3(5H)-amine in four steps including one step under microwave dielectric heating is reported. The structural identity of the synthesized compounds was establishe...The synthesis of new 4-imino-4H-chromeno[2,3-d]pyrimidin-3(5H)-amine in four steps including one step under microwave dielectric heating is reported. The structural identity of the synthesized compounds was established according to their spectroscopic analysis, such as FT-IR, NMR and mass spectroscopy. These new compounds were tested for their antiproliferative activities on seven representative human tumoral cell lines (Huh7 D12, Caco2, MDA-MB231, MDA-MB468, HCT116, PC3 and MCF7) and also on fibroblasts. Among them, only the compounds 6c showed micromolar cytotoxic activity on tumor cell lines (1.8 50 50 > 25 μM). Finally, in silico ADMET studies ware performed to investigate the possibility of using of the identified compound 6c as potential anti-tumor compound.展开更多
Novel heteropolycyclic nitrogen systems bearing fluorine substituted pyrazolo[3,4-d] pyrimidine moiety have been synthesis by the interaction between N’-heteroaryl guanidine 4 with polyfunctional π-acceptors in diff...Novel heteropolycyclic nitrogen systems bearing fluorine substituted pyrazolo[3,4-d] pyrimidine moiety have been synthesis by the interaction between N’-heteroaryl guanidine 4 with polyfunctional π-acceptors in different media and condition. The structures of the synthesis compounds were established by spectroscopic analysis and evaluated as antifungal probes in various concentration.展开更多
A precise knowledge of geometry is always pivotal to a 3-D X-ray imaging system,such as computed tomography(CT),digital X-ray tomosynthesis,and computed laminography.To get an accurate and reliable reconstruction imag...A precise knowledge of geometry is always pivotal to a 3-D X-ray imaging system,such as computed tomography(CT),digital X-ray tomosynthesis,and computed laminography.To get an accurate and reliable reconstruction image,exact knowledge of geometry is indispensable.Nowadays,geometric calibration has become a necessary step after completing CT system installation.Various geometric calibration methods have been reported with the fast development of 3-D X-ray imaging techniques.In these methods,different measuring methods,calibration phantoms or markers,and calculation algorithms were involved with their respective advantages and disadvantages.This paper reviews the history and current state of geometric calibration methods for different3-D X-ray imaging systems.Various calibration algorithms are presented and summarized,followed by our discussion and outlook.展开更多
The computational load is prohibitive for real-time image generation in 3-D sonar systems, particularly when the steering angle approximation is required. In this paper, a novel multiple Chirp Zeta Transforms (MCZT)...The computational load is prohibitive for real-time image generation in 3-D sonar systems, particularly when the steering angle approximation is required. In this paper, a novel multiple Chirp Zeta Transforms (MCZT) beamforming method in frequency domain is being proposed. The single long-length Chirp Zeta Transform (CZT) in the original CZT beamforming is replaced by several CZTs with smaller lengths for different partitions along each dimension. The implementing routine of the algorithm is also optimized. Furthermore, an avenue to evaluate the estimating error for the angle approximation in 3-D imaging applications is presented, and an approach to attain valid partitions for the steering angles is also flhistrated. This paper demonstrates a few advantages of the proposed frequency-domain beamforming method over existing methods in terms of the computatianal complexity.展开更多
In this paper, the entangled mapping approach (EMA) is applied to obtain variable separation solutions of (1+1)-dimensional and (3+1)-dimensional systems. By analysis, we firstly find that there also exists a ...In this paper, the entangled mapping approach (EMA) is applied to obtain variable separation solutions of (1+1)-dimensional and (3+1)-dimensional systems. By analysis, we firstly find that there also exists a common formula to describe suitable physical fields or potentials for these (1+1)-dimensional models such as coupled integrable dispersionless (CID) and shallow water wave equations. Moreover, we find that the variable separation solution of the (3+1)-dimensional Burgers system satisfies the completely same form as the universal quantity U1 in (2+1)-dimensional systems. The only difference is that the function q is a solution of a constraint equation and p is an arbitrary function of three independent variables.展开更多
本文介绍一种基于GE-Fanuc公司PAC Systems RX3i控制器对化工厂液体混合炉进行plc改造的方法,使之能够实现自动配比及自动进料和出料的过程。较之传统的继电接触控制系统有较高的自动化程度,减少人员的数量和降低人员的要求,该方法适合...本文介绍一种基于GE-Fanuc公司PAC Systems RX3i控制器对化工厂液体混合炉进行plc改造的方法,使之能够实现自动配比及自动进料和出料的过程。较之传统的继电接触控制系统有较高的自动化程度,减少人员的数量和降低人员的要求,该方法适合推广到其他的液体混合的应用场合。展开更多
针对系统不同的调速要求,介绍了基于PAC Systems RX3i的多种电机转速的控制方法。主要从系统的组成、调速的基本思路、调速的实现方法、模块硬件的设置、梯形图的编写等展开论述。每种调速方法均在PAC Systems RX3i和MM440的联合平台上...针对系统不同的调速要求,介绍了基于PAC Systems RX3i的多种电机转速的控制方法。主要从系统的组成、调速的基本思路、调速的实现方法、模块硬件的设置、梯形图的编写等展开论述。每种调速方法均在PAC Systems RX3i和MM440的联合平台上进行了测试。对各种调速的优缺点和注意事项及可能遇到的问题进行了阐述说明,最后对整个调速的设计过程进行了总结。展开更多
基金CONAHCYTTecnológico Nacional de Mexico/Tijuana Institute of Technology for the support during this research
文摘In this paper,we offer a review of type-3 fuzzy logic systems and their applications in control.The main objective of this work is to observe and analyze in detail the applications in the control area using type-3 fuzzy logic systems.In this case,we review their most important applications in control and other related topics with type-3 fuzzy systems.Intelligent algorithms have been receiving increasing attention in control and for this reason a review in this area is important.This paper reviews the main applications that make use of Intelligent Computing methods.Specifically,type-3 fuzzy logic systems.The aim of this research is to be able to appreciate,in detail,the applications in control systems and to point out the scientific trends in the use of Intelligent Computing techniques.This is done with the construction and visualization of bibliometric networks,developed with VosViewer Software,which it is a free Java-based program,mainly intended to be used for analyzing and visualizing bibliometric networks.With this tool,we can create maps of publications,authors,or journals based on a co-citation network or construct maps of keywords,countries based on a co-occurrence networks,research groups,etc.
文摘目的探讨(1-3)-β-D葡聚糖联合降钙素原(procalcitonin,PCT)、CD4^(+)T淋巴细胞多指标在艾滋病患者马尔尼菲篮状菌感染早期诊断临床研究。方法回顾性选取我院2020年1月—2022年6月住院的120例艾滋病患者为研究对象。依据实验室结果,将其分为马尔尼菲篮状菌感染确诊组(血或组织液培育养出马尔尼菲篮状菌),简称A组(62例),及马尔尼菲篮状菌感染临床诊断组[根据临床症状、体征、血常规及(1-3)-β-D葡聚糖、PCT、CD4^(+)T淋巴细胞多指标诊断],简称B组(58例)。检测患者(1-3)-β-D葡聚糖、PCT、CD4^(+)T淋巴细胞的表达水平,采用受试者工作特征(receiver-operating characteristic,ROC)曲线下面积(area under the curve,AUC)评估上述指标联合检测对艾滋病患者感染马尔尼菲篮状菌的诊断效能。结果A组的(1-3)-β-D葡聚糖和PCT水平均高于B组,CD4^(+)T淋巴细胞个数低于B组(P<0.05);(1-3)-β-D葡聚糖、PCT、CD4^(+)T淋巴细胞联合检测的AUC为0.933,(1-3)-β-D葡聚糖单独检测的AUC是0.812,PCT单独检测的AUC为0.883,CD4^(+)T淋巴细胞单独检测的AUC是0.810,(1-3)-β-D葡聚糖、PCT和CD4^(+)T淋巴细胞联合检测的AUC皆优于三项单独检测,表明(1-3)-β-D葡聚糖、PCT和CD4^(+)T淋巴细胞联合检测的诊断价值皆优于单一指标诊断,且联合检测的特异度、约登指数分别为92.43%和0.580,均高于三项单独检测。结论(1-3)-β-D葡聚糖联合PCT和CD4^(+)T淋巴细胞多指标对艾滋病马尔尼菲篮状菌感染具有非常高的临床诊断价值,能够帮助医生分析出高危风险患者,及时制定治疗方案,同时也承担预后效果的判断依据,对治疗艾滋病马尔尼菲篮状菌感染具有非常重要的研究价值。
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Ministry of Science and ICT(MSIT)(No.2021R1A2C2012808)Technology Innovation Program(Alchemist Project)(No.20012378)funded by the Ministry of Trade,Industry&Energy(MOTIE),South Korea.
文摘Dose-dense chemotherapy is the preferred first-line therapy for triple-negative breast cancer(TNBC),a highly aggressive disease with a poor prognosis.This treatment uses the same drug doses as conventional chemotherapy but with shorter dosing intervals,allowing for promising clinical outcomes with intensive treatment.However,the frequent systemic administration used for this treatment results in systemic toxicity and low patient compliance,limiting therapeutic efficacy and clinical benefit.Here,we report local dose-dense chemotherapy to treat TNBC by implanting 3D printed devices with timeprogrammed pulsatile release profiles.The implantable device can control the time between drug releases based on its internal microstructure design,which can be used to control dose density.The device is made of biodegradable materials for clinical convenience and designed for minimally invasive implantation via a trocar.Dose density variation of local chemotherapy using programmable release enhances anti-cancer effects in vitro and in vivo.Under the same dose density conditions,device-based chemotherapy shows a higher anticancer effect and less toxic response than intratumoral injection.We demonstrate local chemotherapy utilizing the implantable device that simulates the drug dose,number of releases,and treatment duration of the dose-dense AC(doxorubicin and cyclophosphamide)regimen preferred for TNBC treatment.Dose density modulation inhibits tumor growth,metastasis,and the expression of drug resistance-related proteins,including p-glycoprotein and breast cancer resistance protein.To the best of our knowledge,local dose-dense chemotherapy has not been reported,and our strategy can be expected to be utilized as a novel alternative to conventional therapies and improve anti-cancer efficiency.
基金National Natural Science Foundation of China(No.8186029481860295)Natural Science Foundation of Inner Mongolia Autonomous Region(No.2019MS080552021MS08045)Science and Technology Plan Project of Inner Mongolia Autonomous Region(No.2018020892019GG052)。
文摘Objective: This study was to investigate the role of hsa-miR-155-3p and hsa-miR-155-5p as biomarkers and regulators of biological behavior in Systemic Sclerosis. Methods: A total of 10 SSc patients and 10 healthy controls were selected for the study. The expression levels of hsa-miR-155-3p and hsa-miR-155-5p in peripheral blood mononuclear cells of SSc patients and healthy controls were measured using RT-qPCR. The diagnostic value of these miRNAs was explored using Receiver Operating Characteristic curve analysis. Pearson or Spearman correlation analysis was performed to assess the correlation between miRNAs and clinical indicators in SSc patients. Potential target genes of hsa-miR-155-3p and hsa-miR-155-5p were predicted using miRDB, Targetscan, and miRDIP databases. GO functional annotation, KEGG pathway enrichment analysis, protein-protein interaction network construction, and selection of central genes were conducted. Results: The expression levels of hsa-miR-155-3p and hsa- miR-155-5p were significantly higher in PBMCs of SSc patients compared to healthy controls (P<0.001). The ROC curve analysis showed that hsa-miR-155-3p and hsa-miR-155-5p had a high diagnostic value for SSc (AUC=1, P<0.001). Correlation analysis revealed that hsa- miR-155-3p, hsa-miR-155-5p, and clinical indicators such as high-resolution CT, neutrophil percentage, lymphocyte percentage, and albumin to globulin ratio were correlated (P<0.05). The signaling pathways enriched with target genes of hsa-miR-155-3p and hsa-miR-155- 5p were closely associated with the occurrence and development of SSc fibrosis, immunity, and inflammation. Conclusions: hsa-miR-155-3p and hsa-miR-155-5p may be involved in regulating the occurrence and development of SSc fibrosis, immunity, and inflammation. They have the potential to serve as biomarkers for clinical diagnosis and treatment of SSc.
文摘The synthesis of new 4-imino-4H-chromeno[2,3-d]pyrimidin-3(5H)-amine in four steps including one step under microwave dielectric heating is reported. The structural identity of the synthesized compounds was established according to their spectroscopic analysis, such as FT-IR, NMR and mass spectroscopy. These new compounds were tested for their antiproliferative activities on seven representative human tumoral cell lines (Huh7 D12, Caco2, MDA-MB231, MDA-MB468, HCT116, PC3 and MCF7) and also on fibroblasts. Among them, only the compounds 6c showed micromolar cytotoxic activity on tumor cell lines (1.8 50 50 > 25 μM). Finally, in silico ADMET studies ware performed to investigate the possibility of using of the identified compound 6c as potential anti-tumor compound.
文摘Novel heteropolycyclic nitrogen systems bearing fluorine substituted pyrazolo[3,4-d] pyrimidine moiety have been synthesis by the interaction between N’-heteroaryl guanidine 4 with polyfunctional π-acceptors in different media and condition. The structures of the synthesis compounds were established by spectroscopic analysis and evaluated as antifungal probes in various concentration.
基金supported by the National Natural Science Foundation of China(No.81427803 and 61571256)the Beijing Excellent Talents Training Foundation(No.2013D009004000004)
文摘A precise knowledge of geometry is always pivotal to a 3-D X-ray imaging system,such as computed tomography(CT),digital X-ray tomosynthesis,and computed laminography.To get an accurate and reliable reconstruction image,exact knowledge of geometry is indispensable.Nowadays,geometric calibration has become a necessary step after completing CT system installation.Various geometric calibration methods have been reported with the fast development of 3-D X-ray imaging techniques.In these methods,different measuring methods,calibration phantoms or markers,and calculation algorithms were involved with their respective advantages and disadvantages.This paper reviews the history and current state of geometric calibration methods for different3-D X-ray imaging systems.Various calibration algorithms are presented and summarized,followed by our discussion and outlook.
基金National High Technology Research and Development Program (863 Program) of China (No. 2010AA09Z104)the Fundamental Research Funds for the Central Universities
文摘The computational load is prohibitive for real-time image generation in 3-D sonar systems, particularly when the steering angle approximation is required. In this paper, a novel multiple Chirp Zeta Transforms (MCZT) beamforming method in frequency domain is being proposed. The single long-length Chirp Zeta Transform (CZT) in the original CZT beamforming is replaced by several CZTs with smaller lengths for different partitions along each dimension. The implementing routine of the algorithm is also optimized. Furthermore, an avenue to evaluate the estimating error for the angle approximation in 3-D imaging applications is presented, and an approach to attain valid partitions for the steering angles is also flhistrated. This paper demonstrates a few advantages of the proposed frequency-domain beamforming method over existing methods in terms of the computatianal complexity.
基金The authors express their sincere thanks to the anonymous referees for their constructive suggestions and kind help.
文摘In this paper, the entangled mapping approach (EMA) is applied to obtain variable separation solutions of (1+1)-dimensional and (3+1)-dimensional systems. By analysis, we firstly find that there also exists a common formula to describe suitable physical fields or potentials for these (1+1)-dimensional models such as coupled integrable dispersionless (CID) and shallow water wave equations. Moreover, we find that the variable separation solution of the (3+1)-dimensional Burgers system satisfies the completely same form as the universal quantity U1 in (2+1)-dimensional systems. The only difference is that the function q is a solution of a constraint equation and p is an arbitrary function of three independent variables.
文摘针对系统不同的调速要求,介绍了基于PAC Systems RX3i的多种电机转速的控制方法。主要从系统的组成、调速的基本思路、调速的实现方法、模块硬件的设置、梯形图的编写等展开论述。每种调速方法均在PAC Systems RX3i和MM440的联合平台上进行了测试。对各种调速的优缺点和注意事项及可能遇到的问题进行了阐述说明,最后对整个调速的设计过程进行了总结。