Two-Dimensional Medical Image 3D Visualization System’s Realization

With the development of virtual reality application in the medical field, two-dimensional medical image of the three-dimensional visualization technology made possible. Surgery gets into minimally invasive operation microscopy Era, and gradually becomes a new research hotspot. This paper studies the realization of two-dimensional medical im-age 3D reconstruction visualization system method, and the overall process and management module. Using the main technology of VTK (The Visualization Toolkit) to achieve a two-dimensional medical image three-dimensional visua-lization system, which can help the physician to obtain help clinical diagnosis Information and play an important role in treatment, accurate positioning in diseased tissue and tumor early diagnosis.

Abundant invariant solutions of extended(3+1)-dimensional KP-Boussinesq equation

Lie group analysis method is applied to the extended(3+1)-dimensional Kadomtsev–Petviashvili–Boussinesq equation and the corresponding similarity reduction equations are obtained with various infinitesimal generators.By selecting suitable arbitrary functions in the similarity reduction solutions,we obtain abundant invariant solutions,including the trigonometric solution,the kink-lump interaction solution,the interaction solution between lump wave and triangular periodic wave,the two-kink solution,the lump solution,the interaction between a lump and two-kink and the periodic lump solution in different planes.These exact solutions are also given graphically to show the detailed structures of this high dimensional integrable system.

Utility of real-time 3D visualization system in the early stage of phacoemulsification training

●AIM:To determine the teaching effects of a real-time three dimensional(3D)visualization system in the operating room for early-stage phacoemulsification training.●METHODS:A total of 10 ophthalmology residents of the first-year postgraduate were included.All the residents were novices to cataract surgery.Real-time cataract surgical observations were performed using a custom-built 3D visualization system.The training lasted 4wk(32h)in all.A modified International Council of Ophthalmology’s Ophthalmology Surgical Competency Assessment Rubric(ICO-OSCAR)containing 4 specific steps of cataract surgery was applied.The self-assessment(self)and expert-assessment(expert)were performed through the microsurgical attempts in the wet lab for each participant.●RESULTS:Compared with pre-training assessments(self 3.2±0.8,expert 2.5±0.6),the overall mean scores of posttraining(self 5.2±0.4,expert 4.7±0.6)were significantly improved after real-time observation training of 3D visualization system(P<0.05).Scores of 4 surgical items were significantly improved both self and expert assessment after training(P<0.05).●CONCLUSION:The 3D observation training provides novice ophthalmic residents with a better understanding of intraocular microsurgical techniques.It is a useful tool to improve teaching efficiency of surgical education.

A 3-DIMENSIONAL DATA MODEL FOR VISUALIZING CLOVERLEAF JUNCTION IN A CITY MODEL

The research work has been seldom done about cloverleaf junction expression in a 3-dimensional city model (3DCM). The main reason is that the cloverleaf junction is often in a complex and enormous construction. Its main body is bestraddle in air,and has aerial intersections between its parts. This complex feature made cloverleaf junction quite different from buildings and terrain, therefore, it is difficult to express this kind of spatial objects in the same way as for buildings and terrain. In this paper,authors analyze spatial characteristics of cloverleaf junction, propose an all-constraint points TIN algorithm to partition cloverleaf junction road surface, and develop a method to visualize cloverleaf junction road surface using TIN. In order to manage cloverleaf junction data efficiently, the authors also analyzed the mechanism of 3DCM data management, extended BLOB type in relational database, and combined R-tree index to manage 3D spatial data. Based on this extension, an appropriate data

Visual representation and characterization of three-dimensional hydrofracturing cracks within heterogeneous rock through 3D printing and transparent models

The heterogeneity of unconventional reservoir rock tremendously affects its hydrofracturing behavior. A visual representation and accurate characterization of the three-dimensional （3D） growth and distribution of hydrofracturing cracks within heterogeneous rocks is of particular use to the design and implementation of hydrofracturing stimulation of unconventional reservoirs. However, because of the difficulties involved in visually representing and quantitatively characterizing a 3D hydrofracturing crack-network, this issue remains a challenge. In this paper, a novel method is proposed for physically visualizing and quantitatively characterizing the 3D hydrofracturing crack-network distributed through a heterogeneous structure based on a natural glutenite sample. This method incorporates X-ray microfocus computed tomography （μCT）, 3D printing models and hydrofracturing triaxial tests to represent visually the heterogeneous structure, and the 3D crack growth and distribution within a transparent rock model during hydrofracturing. The coupled effects of material heterogeneity and confining geostress on the 3D crack initiation and propagation were analyzed. The results indicate that the breakdown pressure of a heterogeneous rock model is significantly affected by material heterogeneity and confining geostress. The measured breakdown pressures of heterogeneous models are apparently different from those predicted by traditional theories. This study helps to elucidate the quantitative visualization and characterization of the mechanism and influencing factors that determine the hydrofracturing crack initiation and propagation in heterogeneous reservoir rocks.

In-situ three-dimensional visualization of dynamic tension deformation in ferrite stainless steels

An improved three-dimensional （3-D） experimental visualization methodology is presented tor evaluating the fracture mechanisms of ferritic stainless steels by in-situ tensile testing with an environmental scanning electron microscope （ESEM）. The samples were machined with a radial notched shape and a sloped surface. Both planar surface deformation and sloping surface deformation-induced microvoids were observed during dynamic tension experiments, where a greater amount of information could be obtained from the sloping surface. The results showed that microvoids formed at the grain boundaries of highly elongated large grains. The microvoids nucleated in the severely deformed regions grew nearly parallel to the tensile axis, predominantly along the grain boundaries. The microvoids nucleated at the interface of particles and the matrix did not propagate due to the high plasticity of the matrix. The large microvoids propagated and showed a zigzag shape along the grain boundaries,seemingly a consequence of the fracture of the slip bands caused by dislocation pile-ups. The final failure took place due to the reduction of the load-beating area.

Three-Dimensional Visualization of Neurovascular Structures in the Posterior Cranial Fossa: A Potential Concept for Microsurgical Considerations in Aneursyms

3D visualization was established for noninvasive evaluation of neurovascular compression syndromes. MR-CISS (constructive interference in the steady state) is the most potent image source to depict neurovascular details. The purpose of this article is the conceptual view over the established technique of 3D visualization in the topography of aneurysms in the posterior circulation in relation to surrounding cranial nerves and the brainstem.

Visualization of Three-dimensional Human Data Based on CT Image

Three-dimensional medical image visualization becomes an essential part for medical field, including computer aided diagnosis, surgery planning and simulation, artificial limb surgery, radiotherapy planning, and teaching etc. In this paper, marching cubes algorithm is adopted to reconstruct the 3-D images for the CT image sequence in DICOM format under theVC＋＋6.0 and the visual package VTK platform. The relatively simple interactive operations such as rotation and transfer can be realized on the platform. Moreover, the normal vector and interior point are calculated to form the virtual clipping plane, which is then used to incise the 3-D object. Information of the virtual slice can be obtained, in the mean while the virtual slice images are displayed on the screen. The technique can realize the real time interaction extraction of virtual slice on 3-D CT image. The cuboids structured can be zoomed, moved and eircumrotated by operating mouse to incise the 3-D reconstruction object. Real time interaction can be realized by clipping the reconstruction object. The coordinates can be acquired by the mouse clicking in the 3D space, to realize the point mouse pick-up as well angle and distance interactive measurement. We can get quantitative information about 3-D images through measurement.

Visualization of 3-D Field of Explosion

In order to visualize the 3-D field of explosion and describe the complex physical phenomena of explosion, the 3-D data resulting from numerical simulation by 3-D multi-material in cell (MMIC), and the application of volume visualization is explored, based on the characteristics of explosion and shock. Based on this, a visualization system for 3-D explosion--ViSC3D is designed. Approaches for the visualization of 3-D field of explosion are presented. The algorithm and the functions of ViSC3D are also presented. ViSC3D is thus a useful tool to observe and analyze either the full picture or the details of a 3-D field of explosion, that are difficult to observe and analyze directly. With ViSC3D, the field of explosion between the hill slopes is visualized. The cutaway views and 2-D slices are also given. The full picture and partial details of 3-D field of explosion can be observed clearly. Furthermore, ViSC3D can be used to visualize other similar 3-D data fields.

Study upon Modeling and Visualization of 3D Geologic Body Based on Generalized Tri-Prism

According to the characteristics of bore data,a model of 3D geologic body with generalized tri-prism as the primitive modeling element is constructed while the modeling process and key algorithms of modeling are presented here in detail.Using this method,the original bore data go through Delaunay triangulation to generate irregular triangular network on the surface,and then links stratum segments on the adjoining bores in session to form tri-prisms which would be pinched out.Finally stratified 3D geologic body model is built by an iterated search which searches for consecutive layer of the same property.The result shows that this method can effectively simulate stratified stratum modeling.

All Single Traveling Wave Solutions to （3＋1）-Dimensional Nizhnok-Novikov-Veselov Equation

Using elementary integral method, a complete classification of all possible exact traveling wave solutions to （3＋1）-dimensional Nizhnok-Novikov-Veselov equation is given. Some solutions are new.

DATA MODEL AND VISUALIZATION OF 3D CITY LANDSCAPE BASED ON INTEGRATED DATABASES

Data acquisition and modeling are the two important, difficult and costful aspects in a Cybercity project. 2D-GIS is mature and can manage a lot of spatial data. Thus 3D-GIS should make the best of data and technology of 2D-GIS. Construction of a useful synthetic environment requires integration of multiple types of information like DEM, texture images and 3D representation of objects such as buildings. In this paper, the method for 3D city landscape data model and visualization based on integrated databases is presented. Since the data volume of raster are very huge, special strategies(for example, pyramid gridded method) must be adopted in order to manage raster data efficiently. Three different methods of data acquisition, the proper data structure and a simple modeling method are presented as well. At last, a pilot project of Shanghai Cybercity is illustrated.

New Exact Solutions and Conservation Laws to （3＋1）-Dimensional Potential-YTSF Equation

Using the modified find some new exact solutions to Lie point symmetry groups and also get conservation laws, of the CK＇s direct method, we build the relationship between new solutions and old ones and the （3＋1）-dimensional potentiaial-YTSF equation. Baaed on the invariant group theory, Lie symmetries of the （3＋1）-dimensional potential-YTSF equation are obtained. We equation with the given Lie symmetry.

Evaluation of Airway Obstruction at Soft Palate Level in Male Patients with Obstructive Sleep Apnea/Hypopnea Syndrome:Dynamic 3-Dimensional CT Imaging of Upper Airway

This study examined the dynamic characteristics of upper airway collapse at soft palate level in patients with obstructive sleep apnea/hypopnea syndrome（OSAHS） by using dynamic 3-Dimensional（3-D） CT imaging.A total of 41 male patients who presented with 2 of the following symptoms,i.e.,daytime sleepiness and fatigue,frequent snoring,and apnea with witness,were diagnosed as having OSAHS.They underwent full-night polysomnography and then dynamic 3-D CT imaging of the upper airway during quiet breathing and in Muller＇s maneuver.The soft palate length（SPL）,the minimal cross-sectional area of the retropalatal region（mXSA-RP）,and the vertical distance from the hard palate to the upper posterior part of the hyoid（hhL） were compared between the two breathing states.These parameters,together with hard palate length（HPL）,were also compared between mild/moderate and severe OSAHS groups.Association of these parameters with the severity of OSAHS [as reflected by apnea hypopnea index（AHI） and the lowest saturation of blood oxygen（LSaO2）] was examined.The results showed that 31 patients had severe OSAHS,and 10 mild/moderate OSAHS.All the patients had airway obstruction at soft palate level.mXSA-RP was significantly decreased and SPL remarkably increased during Muller＇s maneuver as compared with the quiet breathing state.There were no significant differences in these airway parameters（except the position of the hyoid bone） between severe and mild/moderate OSAHS groups.And no significant correlation between these airway parameters and the severity of OSAHS was found.The position of hyoid was lower in the severe OSAHS group than in the mild/moderate OSAHS group.The patients in group with body mass index（BMI）≥26 had higher collapse ratio of mXSA-RP,greater neck circumference and smaller mXSA-RP in the Muller＇s maneuver than those in group with BMI26（P0.05 for all）.It was concluded that dynamic 3-D CT imaging could dynamically show the upper airway changes at soft palate level in OSAHS patients.All the OSAHS patients had airway obstruction of various degrees at soft palate level.But no correlation was observed between the airway change at soft palate level and the severity of OSAHS.The patients in group with BMI≥26 were more likely to develop airway obstruction at soft palate level than those with BMI26.

Grammian Determinant Solution and Pfaffianization for a (3+1)-Dimensional Soliton Equation

Based on the Pfaffian derivative formulae,a Grammian determinant solution for a(3+1)-dimensionalsoliton equation is obtained.Moreover,the Pfaffianization procedure is applied for the equation to generate a newcoupled system.At last,a Gram-type Pfaffian solution to the new coupled system is given.

NOVEL 6-SPS PARALLEL 3-DIMENSIONAL PLATFORM MANIPULATOR AND ITS FORCE/MOTION TRANSMISSION ANALYSIS

The unique design for a novel 6-SPS parallel 3-dimensional platformmanipulator with an orthogonal configuration is investigated. The layout feature of the parallelmanipulator is described. Its force/motion transmission capability, evaluation criteria arepresented. At the orthogonal configuration, the criteria and the relationships between the criteriaand the link lengths are analyzed, which is important since it can provide designer a piece ofvaluable information about how to choose the linear actuators. From the analysis of the results itis shown that the force/motion transmission capabilities of the parallel manipulator arecharacterized by isotropy at the orthogonal configuration. The manipulator is particularly suitablefor certain applications in 6-DOF micromanipulators and 6-axis force/moment transducers.

Spatiotemporal Similaritons in (3+l)-Dimensional Inhomogeneous Nonlinear Medium with Cubic-Quintic Nonlinearity

We obtain exact spatiotemporal similaritons to a （3＋ l）-dimensional inhomogeneous nonlinear Schrodinger equation, which describes the propagation of optical pulses in a cubic-quintic nonlinearity medium with distributed dispersion and gain. A one-to-one correspondence between such self-similar waves and solutions of the elliptic equation is found when a certain compatibility condition is satisfied. Based on exact solutions, we discuss evolutional behaviors of self-similar cnoidal waves and chirped similaritons in two kind of typicai soliton control systems. Moreover, the comparison between chirped similaritons and chirp-free solitons is given.

Some Special Types of Solitary Wave Solutions for （3＋1）-Dimensional Jimbo-MiwaEquation

Using the extended homogeneous balance method, we find some special types of single solitary wave solution and new types of the multisoliton solutions of the (3+1)-dimensional Jimbo-Miwa equation.

A Generalized Variable-Coefficient Algebraic Method Exactly Solving （3＋1）-Dimensional Kadomtsev-Petviashvilli Equation

A generalized variable-coefficient algebraic method is appfied to construct several new families of exact solutions of physical interest for （3＋1）-dimensional Kadomtsev-Petviashvilli （KP） equation. Among them, the Jacobi elliptic periodic solutions exactly degenerate to the soliton solutions at a certain limit condition. Compared with the existing tanh method, the extended tanh method, the Jacobi elliptic function method, and the algebraic method, the proposed method gives new and more general solutions.

Web-based interactive visualization of 3D video mosaics using X3D standard

We present a method of 3D image mosaicing for real 3D representation of roadside buildings, and implement a Web-based interactive visualization environment for the 3D video mosaics created by 3D image mosaicing. The 3D image mo- saicing technique developed in our previous work is a very powerful method for creating textured 3D-GIS data without excessive data processing like the laser or stereo system. For the Web-based open access to the 3D video mosaics, we build an interactive visualization environment using X3D, the emerging standard of Web 3D. We conduct the data preprocessing for 3D video mosaics and the X3D modeling for textured 3D data. The data preprocessing includes the conversion of each frame of 3D video mosaics into concatenated image files that can be hyperlinked on the Web. The X3D modeling handles the representation of concatenated images using necessary X3D nodes. By employing X3D as the data format for 3D image mosaics, the real 3D representation of roadside buildings is extended to the Web and mobile service systems.