3D MERGE与3D SPACE STIR序列在腰椎间盘突出症检查中的应用比较

目的:对比三维多回波恢复梯度回波(3D MERGE)、三维可变反转角快速自旋回波(3D SPACE STIR)序列在腰椎间盘突出症(LDH)检查中的应用效果。方法:选择2020年1月~2022年11月收治的135例LDH患者,回顾性分析患者临床和磁共振成像(MRI)资料,所有患者均接受常规MRI扫描及3D MERGE、3D SPACE STIR序列扫描,对比3D MERGE、3D SPACE STIR序列测量神经根直径的一致性,评价两种序列的图像质量参数[信噪比(SNR)、对比噪声比(CNR)]、图像清晰度评分。结果:3D MERGE和3D SPACE STIR序列测量的L3~S1神经根直径比较差异无统计学意义(P>0.05),且两组序列测量的L3、L4、L5和S1直径均显示出较高相关性(r=0.957,0.986,0.975,0.972,P<0.05);3D MERGE序列的SNR及CNR均高于3D SPACE STIR序列,神经根显示分级、图像清晰度评分优于3D SPACE STIR序列,差异有统计学意义(P<0.05)。结论:3D MERGE、3D SPACE STIR序列在LDH神经根直径测量中具有极高一致性,3D MERGE序列较3D SPACE STIR序列能够更清晰显示神经跟的解剖形态,图像质量更好。

MR3D-STIR SPACE序列增强扫描在臂丛节后神经成像的效果分析

目的探讨在臂丛节后神经成像中施行MR3D-STIR SPACE序列增强扫描的临床价值及成像质量。方法选取50例、2021年1月-2022年8月臂丛神经患者,均行MR常规序列扫描、MR3D-SPACE-STIR序列平扫及增强扫描。对患者的损伤部位、形态、信号强度与近、远侧段臂丛神经的相关性,并对比平扫及增强图像质量。结果MRI平扫诊断节后神经损伤敏感性为89.47%、特异性为83.33%、准确性88.64%。增强MR3D-SPACE-STIR的组织对比显著提高,经处理后,可对臂丛神经节后的走行图像进行完整显示。且该技术增强序列图像的对比噪声比(CNR)为(0.57±0.09)、背景抑制评分(3.56±0.63)分及对臂丛神经显示评分(3.96±0.53)与平扫(0.35±0.06)、(1.58±0.51)分、(2.02±0.59)分均存在显著差异(t=12.231,12.214,10.170;P<0.05)。结论MR 3D-SPACE-STIR序列增强扫描的背景抑制效果较佳,可使臂丛神经损伤及走形得以清晰显示,其臂丛神经节后图像质量较平扫明显提升。

3D printing in space:from mechanical structures to living tissues

3D printing stands at the forefront of transforming space exploration,offering unprecedented on-demand and rapid manufacturing capabilities.It adeptly addresses challenges such as mass reduction,intricate component fabrication,and resource constraints.Despite the obstacles posed by microgravity and extreme environments,continual advancements underscore the pivotal role of 3D printing in aerospace science.Beyond its primary function of producing space structures,3D printing contributes significantly to progress in electronics,biomedicine,and resource optimization.This perspective delves into the technological advantages,environmental challenges,development status,and opportunities of 3D printing in space.Envisioning its crucial impact,we anticipate that 3D printing will unlock innovative solutions,reshape manufacturing practices,and foster self-sufficiency in future space endeavors.

国内外3~6岁幼儿语言能力发展的相关研究——基于Cite Space的可视化分析

本文以3~6岁幼儿语言能力发展为主题,采用Cite Space软件分别以关键词、年发文量、核心作者、核心机构等为关键词,对中国知网收录的31篇文章和Web Of Science收录的130篇文章导出相关内容图谱进行可视化分析。基于此,本文建议通过加强幼儿语言教育相关政策体系的建设,促进家长及幼儿园教师对幼儿语言发展的策略、加大幼儿语言教育的宣传等,来提升幼儿语言能力的发展。

Lie symmetry analysis and invariant solutions for the(3+1)-dimensional Virasoro integrable model

Lie symmetry analysis is applied to a(3+1)-dimensional Virasoro integrable model and the corresponding similarity reduction equations are obtained with the different infinitesimal generators.Invariant solutions with arbitrary functions for the(3+1)-dimensional Virasoro integrable model,including the interaction solution between a kink and a soliton,the lump-type solution and periodic solutions,have been studied analytically and graphically.

Interaction solutions for the second extended(3+1)-dimensional Jimbo–Miwa equation

Based on the Hirota bilinear method,the second extended(3+1)-dimensional Jimbo–Miwa equation is established.By Maple symbolic calculation,lump and lump-kink soliton solutions are obtained.The interaction solutions between the lump and multi-kink soliton,and the interaction between the lump and triangular periodic soliton are derived by combining a multi-exponential function or trigonometric sine and cosine functions with quadratic functions.Furthermore,periodiclump wave solution is derived via the ansatz including hyperbolic and trigonometric functions.Finally,3D plots,2D curves,density plots,and contour plots with particular choices of the suitable parameters are depicted to illustrate the dynamical features of these solutions.

On Differential Equations Describing 3-Dimensional Hyperbolic Spaces

在这篇论文，我们介绍观点一(2+1 ) 描述三维的夸张空格(3-h .s.) 的维的微分方程。(2+1 ) 维的联合非线性的 Schroedinger 方程和它的姐妹方程，(2+1 ) 维的联合衍生物非线性的 Schroedinger 方程，被显示描述 3-h .s.(2+1 ) 维的概括 HFmodel： S_t =(1/( 2i )[ S ， S_y ]+ 2i σS ) _x ，σ_ x =-1/(4i) tr ( SS_xS_y )，在里面它 S ∈( GL_C ( 2 ))/( GL_C ( 1 ) X GL_C ( 1 ))，提供另一个例子( 2+1 )维的微分方程描述 3-h .s.As 直接后果，如此的方程的能量守恒定律的一个无限的数字的几何构造被说明。而且，我们显示能量守恒定律的一个新无限的数字(2+1 ) 维的非线性的 Schroedinger 方程并且(2+1 ) 由一个几何方法的维的衍生物 nonlinearSchroedinger 方程。

基于衍生化3-氨基-2-恶唑烷酮的夹心酶联免疫分析

建立一种3-氨基-2-恶唑烷酮(3-amino-2-oxazolidinone,AOZ)夹心免疫检测方法。通过1,6-己二醇连接2-硝基-4-羧基苯甲醛和生物素合成针对AOZ的新型衍生试剂。在样品前处理时加入衍生试剂可对AOZ进行衍生,衍生产率为89%。在酶标板上包被抗AOZ单克隆抗体并以辣根过氧化物酶标记的亲和素或抗生物素抗体作为第二结合物可实现AOZ的夹心酶联免疫吸附检测(enzyme-linked immunosorbnent assay,ELISA)。从实际应用的角度,得到双抗夹心和抗体-亲和素夹心模式下两个表位的极限距离,分别为12Å和13Å,理想距离分别为16Å和17Å。在双抗夹心和抗体-亲和素夹心模式下的检出限分别达到1.8 pg/mL和0.8 pg/mL(以AOZ质量浓度计),相对于竞争ELISA,其灵敏度最高提高了25倍。平均回收率为73%~85%,平均相对标准偏差为9.0%。

高分辨率血管壁成像时3D SPACE T1压脂与非压脂序列对MCA狭窄病人图像信号、血管壁及斑块的影响

目的:探究高分辨率血管壁成像时利用可变翻转角实现最优化采集的3D快速自旋回波序列(3D-SPACE)T1压脂与非压脂序列对大脑中动脉(middle cerebral artery,MCA)狭窄病人图像信号、血管壁及斑块情况的影响。方法:选取2021年1月—2022年12月于滨州市中心医院接受颅内磁共振血管成像(MR angiography,MRA)检查并确诊的MCA狭窄患者72例为研究对象,患者均接受MCA MRI检查,然后再分别用3D SPACE T1压脂与非压脂序列测量,分析图像信号差异情况,对比不同序列测量的血管断面、管腔及斑块面积情况及图像质量主观评价;分析不同医师图像质量评分的一致性情况。结果:72例患者中,不同序列测量均可以清晰地将MCA斑块显示出来,但测量出的信号存在明显的差异。不同序列测量血管断面、管腔面积对比差异不显著(P>0.05);3D SPACE T1非压脂序列测量斑块面积大于压脂序列测量面积(P<0.05);2种序列管腔显示情况对比差异无统计学意义(P>0.05),其他图像质量对比差异有统计学意义(P<0.05)。2名医生图像质量评分具有良好的一致性。结论:高分辨率血管壁成像时3D SPACE T1非压脂序更有助于对MCA狭窄病人图像信号、血管壁及斑块的测量,可为临床提供治疗依据。

A three-dimensional numerical study on the effect of geometric asymmetry on arcjet thruster performance

In an arcjet thruster,the cathode and constrictor degrade with time,and the electrical arc discharge may become unsymmetrical.In this work,a three-dimensional numerical model of a hydrogen plasma arcjet is developed and validated to study the effect of unsymmetrical electric arc discharge on thruster performance.The unsymmetrical arc discharge is realized by introducing a radial shift of the cathode so that the cathode tip offset is 80μm(25%of the constrictor radius).Simulations are conducted for both axially centered cathode(coaxial)and off-centered cathode(non-coaxial)configurations with identical propellant flow rates and input current.Simulations show asymmetrical arc discharge in the non-coaxial cathode configuration,resulting in azimuthally asymmetric Joule heating,species concentrations,and velocity field.This asymmetry continues as the plasma expands in the divergent section of the nozzle.Temperature,species concentrations,and axial velocity exhibit asymmetric radial distribution at the nozzle exit.The computed Joule heating was found to reduce with cathode shift,and consequently,the thrust and specific impulse of the thruster was decreased by about 6.6%.In the case of the non-coaxial cathode,geometric asymmetry also induces a small side thrust.

腰骶丛神经根成像中T23D SPACE序列的技术优化研究

目的:探讨T23D SPACE序列在腰骶丛神经根中的应用及其参数优化。方法:前瞻性招募并收集46名正常志愿者的临床与影像资料,所有志愿者均行常规T23D SPACE(方法A)、优化后T23D SPACE(方法B)磁共振扫描,并比较2种方法的扫描时间,第4~5腰神经、第1~4骶神经、坐骨神经的神经显示情况,第5腰神经根节中、节前、节后的信噪比(SNR)、对比度噪声比(CNR)_(神经-肌肉)、对比度(CR)_(神经-肌肉值)。优化后T23D SPACE序列(方法B)主要优化了TR、TE、加速因子(回波链)、脂肪抑制方式、血液抑制方式、层厚等参数。结果:(1)方法A扫描时间为356 s,方法B扫描时间为229 s。(2)在神经显示评分比较中,第4、5腰神经,第1~4骶神经和坐骨神经的显示评分在2种方法之间差异无统计学意义。(3)第5腰神经根的节中SNR值(286.842±75.822 vs 376.784±111.880)、CNR_(神经-肌肉值)(389.199±106.824 vs 522.683±159.883)、CR_(神经-肌肉值)(0.798±0.037 vs 0.830±0.038)在2种方法间比较,差异均有统计学意义(P<0.05)。(4)第5腰神经根的节前SNR值(198.758±52.966 vs 260.378±79.631)、CNR_(神经-肌肉值)(254.720±74.904 vs344.948±112.041)、CR_(神经-肌肉值)(0.718±0.070 vs 0.762±0.056)在2种方法间比较,差异均有统计学意义(P<0.05)。(5)第5腰神经根的节后SNR值(161.400±46.883 vs 206.849±59.706)、CNR_(神经-肌肉值)(197.684±63.776 vs 263.240±80.910)、CR_(神经-肌肉值)(0.663±0.068 vs 0.711±0.058)在2种方法间比较,差异均有统计学意义(P<0.05)。结论:常规T23D SPACE序列与优化后的序列均可以显示腰骶神经,优化后扫描更快,神经显示中第5腰神经根的信噪比、对比度均比常规T23D SPACE序列高。

A 3-DIMENSIONAL DATA MODEL FOR VISUALIZING CLOVERLEAF JUNCTION IN A CITY MODEL

The research work has been seldom done about cloverleaf junction expression in a 3-dimensional city model (3DCM). The main reason is that the cloverleaf junction is often in a complex and enormous construction. Its main body is bestraddle in air,and has aerial intersections between its parts. This complex feature made cloverleaf junction quite different from buildings and terrain, therefore, it is difficult to express this kind of spatial objects in the same way as for buildings and terrain. In this paper,authors analyze spatial characteristics of cloverleaf junction, propose an all-constraint points TIN algorithm to partition cloverleaf junction road surface, and develop a method to visualize cloverleaf junction road surface using TIN. In order to manage cloverleaf junction data efficiently, the authors also analyzed the mechanism of 3DCM data management, extended BLOB type in relational database, and combined R-tree index to manage 3D spatial data. Based on this extension, an appropriate data

Evaluation of Airway Obstruction at Soft Palate Level in Male Patients with Obstructive Sleep Apnea/Hypopnea Syndrome:Dynamic 3-Dimensional CT Imaging of Upper Airway

This study examined the dynamic characteristics of upper airway collapse at soft palate level in patients with obstructive sleep apnea/hypopnea syndrome（OSAHS） by using dynamic 3-Dimensional（3-D） CT imaging.A total of 41 male patients who presented with 2 of the following symptoms,i.e.,daytime sleepiness and fatigue,frequent snoring,and apnea with witness,were diagnosed as having OSAHS.They underwent full-night polysomnography and then dynamic 3-D CT imaging of the upper airway during quiet breathing and in Muller＇s maneuver.The soft palate length（SPL）,the minimal cross-sectional area of the retropalatal region（mXSA-RP）,and the vertical distance from the hard palate to the upper posterior part of the hyoid（hhL） were compared between the two breathing states.These parameters,together with hard palate length（HPL）,were also compared between mild/moderate and severe OSAHS groups.Association of these parameters with the severity of OSAHS [as reflected by apnea hypopnea index（AHI） and the lowest saturation of blood oxygen（LSaO2）] was examined.The results showed that 31 patients had severe OSAHS,and 10 mild/moderate OSAHS.All the patients had airway obstruction at soft palate level.mXSA-RP was significantly decreased and SPL remarkably increased during Muller＇s maneuver as compared with the quiet breathing state.There were no significant differences in these airway parameters（except the position of the hyoid bone） between severe and mild/moderate OSAHS groups.And no significant correlation between these airway parameters and the severity of OSAHS was found.The position of hyoid was lower in the severe OSAHS group than in the mild/moderate OSAHS group.The patients in group with body mass index（BMI）≥26 had higher collapse ratio of mXSA-RP,greater neck circumference and smaller mXSA-RP in the Muller＇s maneuver than those in group with BMI26（P0.05 for all）.It was concluded that dynamic 3-D CT imaging could dynamically show the upper airway changes at soft palate level in OSAHS patients.All the OSAHS patients had airway obstruction of various degrees at soft palate level.But no correlation was observed between the airway change at soft palate level and the severity of OSAHS.The patients in group with BMI≥26 were more likely to develop airway obstruction at soft palate level than those with BMI26.

NOVEL 6-SPS PARALLEL 3-DIMENSIONAL PLATFORM MANIPULATOR AND ITS FORCE/MOTION TRANSMISSION ANALYSIS

The unique design for a novel 6-SPS parallel 3-dimensional platformmanipulator with an orthogonal configuration is investigated. The layout feature of the parallelmanipulator is described. Its force/motion transmission capability, evaluation criteria arepresented. At the orthogonal configuration, the criteria and the relationships between the criteriaand the link lengths are analyzed, which is important since it can provide designer a piece ofvaluable information about how to choose the linear actuators. From the analysis of the results itis shown that the force/motion transmission capabilities of the parallel manipulator arecharacterized by isotropy at the orthogonal configuration. The manipulator is particularly suitablefor certain applications in 6-DOF micromanipulators and 6-axis force/moment transducers.

双三元思维与3×3方法

在处理复杂问题、制定全面策略或做出关键决策时,需从多个视角、多个层面或多个维度进行思考与分析。三支决策即三元思维、三元方法和三元计算。遵循三支决策的原则,引入了双三元思维的概念及3×3方法与结构。通过双三元思维结合两个三元结构,构建了一个3×3方法与结构,从九个不同的角度或维度进行思考、分析和解决问题。根据三级层次和三角形方法,得到了两种不同的3×3方法:一是在三级层次方法的基础上,每一层以三角形方法考虑三个相关问题,称为3层×3角形方法;另一种是在三角形方法的基础上,每个顶点以三级层次方法考虑三个相关问题,称为3角形×3层方法。作为一个案例,可以将3×3方法应用于可解释人工智能。借助Symbols-Meaning-Value(SMV)空间的概念,为3×3方法的九个元素赋予具体的语义。基于SMV空间的3×3方法,从不同的层次来分析和解释智能系统所需的数据、假设、工作原理及结果。这为智能系统提供了解释的构建过程及结构,使得最终的解释更易于沟通、理解和接受。

Residual symmetry, CRE integrability and interaction solutions of two higher-dimensional shallow water wave equations

Two(3+1)-dimensional shallow water wave equations are studied by using residual symmetry and the consistent Riccati expansion(CRE) method. Through localization of residual symmetries, symmetry reduction solutions of the two equations are obtained. The CRE method is applied to the two equations to obtain new B?cklund transformations from which a type of interesting interaction solution between solitons and periodic waves is generated.

Thermal effect on endurance performance of 3-dimensional RRAM crossbar array

Three-dimensional（3D） crossbar array architecture is one of the leading candidates for future ultra-high density nonvolatile memory applications. To realize the technological potential, understanding the reliability mechanisms of the3 D RRAM array has become a field of intense research. In this work, the endurance performance of the 3D 1D1 R crossbar array under the thermal effect is investigated in terms of numerical simulation. It is revealed that the endurance performance of the 3D 1D1 R array would be seriously deteriorated under thermal effects as the feature size scales down to a relatively small value. A possible method to alleviate the thermal effects is provided and verified by numerical simulation.

Rota-Baxter Operators on 3-dimensional Lie Algebras and Solutions of the Classical Yang-Baxter Equation

In this paper,we compute Rota-Baxter operators on the 3-dimensional Lie algebra g whose derived algebra’s dimension is 2.Furthermore,we give the corresponding solutions of the classical Yang-Baxter equation in the 6-dimensional Lie algebras g ■ _(ad~*) g~* and some new structures of left-symmetric algebra induced from g and its Rota-Baxter operators.

PartLabeling:A label management framework in 3D space

Background In this work,we focus on the label layout problem:specifying the positions of overlaid virtual annotations in Virtual/Augmented Reality scenarios.Methods Designing a layout of labels that does not violate domain-specific design requirements,while at the same time satisfying aesthetic and functional principles of good design,can be a daunting task even for skilled visual designers.Presenting the annotations in 3D object space instead of projection space,allows for the preservation of spatial and depth cues.This results in stable layouts in dynamic environments,since the annotations are anchored in 3D space.Results In this paper we make two major contributions.First,we propose a technique for managing the layout and rendering of annotations in Virtual/Augmented Reality scenarios by manipulating the annotations directly in 3D space.For this,we make use of Artificial Potential Fields and use 3D geometric constraints to adapt them in 3D space.Second,we introduce PartLabeling:an open source platform in the form of a web application that acts as a much-needed generic framework allowing to easily add labeling algorithms and 3D models.This serves as a catalyst for researchers in this field to make their algorithms and implementations publicly available,as well as ensure research reproducibility.The PartLabeling framework relies on a dataset that we generate as a subset of the original PartNet dataset consisting of models suitable for the label management task.The dataset consists of 10003D models with part annotations.

Performance Evaluation of Three-Dimensional UWB Real-Time Locating Auto-Positioning System for Fire Rescue

Fire rescue challenges and solutions have evolved from straightfor-ward plane rescue to encompass 3D space due to the rise of high-rise city buildings.Hence,this study facilitates a system with quick and simplified on-site launching and generates real-time location data,enabling fire rescuers to arrive at the intended spot faster and correctly for effective and precise rescue.Auto-positioning with step-by-step instructions is proposed when launching the locating system,while no extra measuring instrument like Total Station(TS)is needed.Real-time location tracking is provided via a 3D space real-time locating system(RTLS)constructed using Ultra-wide Bandwidth technology(UWB),which requires electromagnetic waves to pass through concrete walls.A hybrid weighted least squares with a time difference of arrival(WLS/TDOA)positioning method is proposed to address real path-tracking issues in 3D space and to meet RTLS requirements for quick computing in real-world applications.The 3D WLS/TDOA algorithm is theoretically constructed with the Cramer-Rao lower bound(CRLB).The computing complexity is reduced to the lower bound for embedded hardware to directly compute the time differential of the arriving signals using the time-to-digital converter(TDC).The results of the experiments show that the errors are controlled when the positioning algorithm is applied in various complicated situations to fulfill the requirements of engineering applications.The statistical analysis of the data reveals that the proposed UWB RTLS auto-positioning system can track target tags with an accuracy of 0.20 m.