The transient current behaviour for Iron in 3.5%NaCl and 3.5%NaCl +1%NaNO2 solutions during corrosion fatigue (CF) process has been investigated at different given strain amplitudes and strain rates. The results show ...The transient current behaviour for Iron in 3.5%NaCl and 3.5%NaCl +1%NaNO2 solutions during corrosion fatigue (CF) process has been investigated at different given strain amplitudes and strain rates. The results show that elastic strain has little contribution to material dissolution. The elastic tension strain results in the decrease in the transient current, while the elastic compression strain increases the transient current. Compared to the elastic deformation, plastic deformation affects material dissolution evidently For iron in 3.5%NaCl solution, the strain amplitude plays a dominant role in the dissolution process accelerated by the plastic strain, while in 3.5%NaCl+1%NaNO2 solution, both the strain amplitude and strain rate play an important role in this process. In this paper, the effect of the elastic deformation on the material dissolution and the relation between the tension and compression current peak values under the plastic cycle deformation are discussed展开更多
The corrosion behavior of Cu-Cr alloy in 3.5%NaCl+NH3 solution had been studied, and the influences of the concentration of NH3 on corrosion resistance discussed by means of Metallograph, XRD, SEM and electrochemical ...The corrosion behavior of Cu-Cr alloy in 3.5%NaCl+NH3 solution had been studied, and the influences of the concentration of NH3 on corrosion resistance discussed by means of Metallograph, XRD, SEM and electrochemical method. The results show that the Cu is easier to corrosion than Cr, and the corrosion rate increases with the increasing of the concentration of NH3, and deformation worsen the corrosion resistance of the alloy in such corrosive environment.展开更多
文摘The transient current behaviour for Iron in 3.5%NaCl and 3.5%NaCl +1%NaNO2 solutions during corrosion fatigue (CF) process has been investigated at different given strain amplitudes and strain rates. The results show that elastic strain has little contribution to material dissolution. The elastic tension strain results in the decrease in the transient current, while the elastic compression strain increases the transient current. Compared to the elastic deformation, plastic deformation affects material dissolution evidently For iron in 3.5%NaCl solution, the strain amplitude plays a dominant role in the dissolution process accelerated by the plastic strain, while in 3.5%NaCl+1%NaNO2 solution, both the strain amplitude and strain rate play an important role in this process. In this paper, the effect of the elastic deformation on the material dissolution and the relation between the tension and compression current peak values under the plastic cycle deformation are discussed
文摘The corrosion behavior of Cu-Cr alloy in 3.5%NaCl+NH3 solution had been studied, and the influences of the concentration of NH3 on corrosion resistance discussed by means of Metallograph, XRD, SEM and electrochemical method. The results show that the Cu is easier to corrosion than Cr, and the corrosion rate increases with the increasing of the concentration of NH3, and deformation worsen the corrosion resistance of the alloy in such corrosive environment.
