3.5μm Er:ZBLAN光纤激光器及放大器数值仿真

本文利用双波长泵浦(DWP)技术建立了3.5μm Er∶ZBALN光纤激光器及光纤放大器的理论模型。研究了光纤不同参数下激光器及放大器的能级粒子数动力学行为及沿光纤长度上光功率分布特征,计算分析了光纤长度、输出端反射率、铒离子掺杂浓度对于3.5μm激光功率的影响。研究结果显示了光纤长度、输出端反射率存在的最佳范围,高掺杂铒离子浓度光纤相对于低掺杂仅需要较低的976 nm泵浦功率即可实现有效的3.5μm激光输出,且高掺杂浓度下的交叉驰豫过程能阻止猝灭行为,模拟实现了3.5μm光纤激光的高效放大。数值模拟结果对3.5μm激光振荡器及高功率放大的参数设计具有指导意义。

Investigation of the Laser Powder Bed Fusion Process of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si Alloy

Laser powder bed fusion(LPBF)is an advanced manufacturing technology;however,inappropriate LPBF process parameters may cause printing defects in materials.In the present work,the LPBF process of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy was investigated by a two-step optimization approach.Subsequently,heat transfer and liquid flow behaviors during LPBF were simulated by a well-tested phenomenological model,and the defect formation mechanisms in the as-fabricated alloy were discussed.The optimized process parameters for LPBF were detected as laser power changed from 195 W to 210 W,with scanning speed of 1250 mm/s.The LPBF process was divided into a laser irradiation stage,a spreading flow stage,and a solidification stage.The morphologies and defects of deposited tracks were affected by liquid flow behavior caused by rapid cooling rates.The findings of this research can provide valuable support for printing defect-free metal components.

KJ3.5M(A)型环保节能矿灯

介绍以镍-氢电池作为矿灯电源,研制KJ3.5M(A)型环保节能矿灯的情况。重点介绍新型环保节能矿灯的组成、主要性能参数指标的控制实现、研究与试验情况。

Thulium laser treatment for bladder cancer

Recent innovations in thulium laser techniques have allowed application in the treatment of bladder cancer.Laser en bloc resection of bladder cancer is a transurethral procedure that may offer an alternative to the conventional transurethral resection procedure.We conducted a review of basic thulium laser physics and laser en bloc resection procedures and summarized the current clinical literature with a focus on complications and outcomes.Literature evidence suggests that thulium laser techniques including smooth incision,tissue vaporization,and en bloc resection represent feasible,safe,and effective procedures in the treatment of bladder cancer.Moreover,these techniques allow improved specimen orientation and accurate determination of invasion depth,facilitating correct diagnosis,restaging,and reevaluation of the need for a second resection.Nonetheless,large-scale multicentre studies with longer follow-up are warranted for a robust assessment.The present review is meant as a quick reference for urologists.

In vitro comparison of the vaporesection of human benign prostatic hyperplasia using 70-and 120-W 2μm lasers

The purpose of the current ex vivo study was to compare the speed of vaporesection of human prostatic tissue with benign prostatic hyperplasia （BPH） and the depth of tissue damage using 70- and 120-W 2-tim laser devices. Fresh prostatic tissue specimens were obtained from five patients by open prostatectomy, and were divided into separate groups （70 and 120 W） based on the energy of the laser output （70 and 120 W, respectively）. The vaporesection speed, coagulation zone depth and the necrotic tissue layer in the prostatic tissue were evaluated. The current result showed that the speeds （mean±s.d.） of vaporesection were 5.21±0.66 and 10.39±1.15 g/5 min for the 70 and 120 W groups, respectively （P=0.000）. There was no difference in the depth of necrosis/ coagulation （0.98±0.1310.30±0.09 and 0.99±0.12/0.31±0.08 mm） for the 70 and 120 W groups, respectively. In conclusion, both 70- and 120-W 2μm laser devices had superficial tissue damage during the vaporesection of human prostate tissue; moreover, the 120-W laser offers a higher vaporesection speed than the 70-W laser.

Observation and optimization of 2 μm mode‐locked pulses in all‐fiber net anomalous dispersion laser cavity

We integrally demonstrate 2μm mode-locked pulses performances in all-fiber net anomalous dispersion cavity.Stable mode-locking operations with the center wavelength around 1950–1980 nm can be achieved by using the nonlinear polarization rotation structure and properly designing the dispersion management component.Conventional soliton is firstly obtained with a total anomalous dispersion cavity.Due to the contribution of commercial ultra-high numerical aperture fibers,net dispersion is reduced to-0.077 ps2.So that stretched pulse with 19.4 nm optical bandwidth is obtained and the de-chirped pulse-width can reach 312 fs using extra-cavity compression.Under pump power greater than 890 mW,stretched pulse can evolve into noise-like pulse with 41.3 nm bandwidth.The envelope and peak of such broadband pulse can be compressed with up to 2.2 ps and 145 fs,respectively.The single pulse energy of largely chirped stretched and noise-like pulse can reach 1.785 nJ and 1.53 nJ,respectively.Furthermore,extra-cavity compression can also contribute to a significant increase of peak power.

反井钻机开挖导井(3.5m)补充定额编制研究

反井钻机开挖导井朝着大直径工艺发展,而水电行业现有相关定额中无反井钻机开挖大直径导井(孔径>2.0m)相关定额。对白鹤滩水电站导井开挖过程中统计的实测资料进行整理、计算分析,编制反井钻机开挖3.5m导井补充定额。与有色金属工业预算定额、类似工程实施价对比,结果表明补充定额编制合理,可为类似工程的单价编制、成本控制等提供参考。

An Innovative Gas Sensor with On-Chip Reference Using Monolithic Twin Laser

An innovative gas sensor with on-chip reference using a monolithic twin laser is proposed. In this sensor a monolithic twin laser generates two closer laser beams with slight different wavelengths alternatively, one photodiode is used to catch both absorption and reference signals by time division multiplexing. The detection of nitrous oxide adopting this scheme using a 2.1 I^m antimonide laser and an InGaAs photodiode has been demonstrated experimentally with detection limit below i ppm. Using this on chip reference scheme the fluctuations from the optical path and devices can be compensated effectively; the sensor system is simplified distinctly.

Low noise,continuous-wave single-frequency 1.5-μm laser generated by a singly resonant optical parametric oscillator

We report a low noise continuous-wave （CW） single-frequency 1.5-μm laser source obtained by a singly resonant optical parametric oscillator （SRO） based on periodically poled lithium niobate （PPLN）. The SRO was pumped by a CW single-frequency Nd：YVO4 laser at 1.06μm. The 1.02 W of CW single-frequency signal laser at 1.5 μm was obtained at pump power of 6 W. At the output power of around 0.75 W, the power stability was better than ±l.5% and no mode-hopping was observed in 30 min and frequency stability was better than 8.5 MHz in 1 min. The signal wavelength could be tuned from 1.57 to 1.59 μm by varying the PPLN temperature. The 1.5-μm laser exhibits low noise characteristics, the intensity noise of the laser reaches the shot noise limit （SNL） at an analysis frequency of 4 MHz and the phase noise is less than 1 dB above the SNL at analysis frequencies above 10 MHz.

MXene Ti_3C_2T_x saturable absorber for pulsed laser at 1.3 μm

The excellent optical properties of MXene provide new opportunities for short-pulse lasers. A diode-pumped passively Q-switched laser at 1.3 μm wavelength with MXene Ti3C2Tx as saturable absorber was achieved for the first time. The stable passively Q-switched laser has 454 ns pulse width and 162 kHz repetition rate at 4.5 W incident pumped power. The experimental results show that the MXene Ti3C2Tx saturable absorber can be used as an optical modulator to generate short pulse lasers in a solid-state laser field.

High-Power Single-Spatial-Mode GaSb Tapered Laser around 2.0 μm with Very Small Lateral Beam Divergence

We report high-power single-spatial-mode type-I GaSb-based tapered lasers fabricated on the InGaSb/AlGaAsSb material system. A straight ridge and three different tapered waveguide structures with varying flare angles are fabricated to optimize the output power and spatial-mode performance. The best devices exhibit single-spatial-mode operation with room-temperature output power up to 350？mW in continuous-wave mode at an emission wavelength around 2.0？μm with a very small far-field lateral divergence angle, which is beyond state of the art in terms of single-spatial-mode output power.

Spectral and laser properties of Yb and Ho co-doped(YLa)_2O_3 transparent ceramic

Highly transparent Yb,Ho doped（YLa）2O3 ceramic was fabricated by conventional ceramic processing with nanopowders.The absorption and emission spectra of the ceramic was investigated.The energy transfer mechanism between Yb3＋ and Ho3＋ was also discussed.The strong emission band around 2 μm indicated that the Yb-Ho：（Y 0.90 La 0.10）2O3 transparent ceramic is a promising gain medium for the generation of 2 μm laser emissions.The laser operation of Yb-Ho co-doped（YLa）2O3 ceramic at 2.1 μm is first reported.

MICROSTRUCTURE IN LASER FUSED HIGH SPEED STEEL W6Mo5Cr4V2(M2)

Microstructure of the deepest zone of high speed steel W6Mo5Cr4V2(M2)melt after laser fu-sion was found to be so fine as the ehill zone of a solidified ingot.When narrower chill zoneformed,the long columnar dendrites grow into the melt and then the fine equiaxed cellularstructure appears in upper melt region nearly surface.The substructure of cellular grains anddendrites was observed to consist of martensite and retained austenile,while the carbides asM_6C_■ Cr_7C_3 and MC distributed at their boundaries.It is believed that the highermicrohardness up to HV_(0.1)=865-960 of the laser fused structure of the alloy is due to the oc-currence of martensite.

Optimization of High Power 1.55-μm Single Lateral Mode Fabry-Perot Ridge Waveguide Lasers

Optimization of the high power single-lateral-mode double-trench ridge waveguide semiconductor laser based on InGaAsP/InP quantum-well heterostructures with a separate confinement layer is reported. Two different waveguide structures of Fabry-Perot lasers emitting at a wavelength of 1.55 μm are fabricated. The influence of an effective lateral refractive index step on the maximum output power is investigated. A cw single mode output power of 165mW is obtained for a 1-mm-long uncoated laser.

Synchronously Pumped Mode-Locked 1.89 μm Tm-Doped Fiber Laser with High Detuning Toleration

We propose and demonstrate a synchronously pumped mode-locked Tm-doped fiber（TDF） laser without any extra mode-locking elements. Pumped by a 1.56 μm pulse fiber laser, the TDF laser generates 1.17 ps pulses with a spectral width of 9.7 nm and a repetition rate of 9.33 MHz. The emission wavelength is tunable along with the cavity length detuning in a wide range of 3 mm. The high detuning toleration is beneficial to achieve high temperature and vibration stability in all-fiber configuration lasers.

Progress of optically pumped GaSb based semiconductor disk laser

This paper reviewed the development of optically pumped GaSb based semiconductor disk lasers （SDLs） emission at 2 μm wavelength region from the aspects of wavelength extending, power scaling, line-width narrowing and short-pulse generation. Most recently, the wavelength of GaSb based SDLs has been extended to 2.8 μm. The highest output power of the GaSb based SDLs has been reached to 17 W at the temperature of 20 ℃. By using active stabilization, the GaSb based SDL with line-width of 20 kHz and output power of 1 W was realized. Moreover, the shortest pulse obtained fromthe GaSb based SDLs was generated as short as 384 fs by incorporating semiconductor saturable absorber mirrors（SESAM） in the cavity.

Structure Character of M-A Constituent in CGHAZ of New Ultra-Low Carbon Bainitic Steel under Laser Welding Conditions

800 MPa grade new ultra-low carbon bainitic （NULCB） steel is the recently developed new generation steel. The microstructure in the coarse-grained heat affected zone （CGHAZ） of NULCB steel under laser welding conditions was investigated by thermal simulation. The influence of the cooling time from 800℃ to 500℃.t8/5 （0.3-30 s）, on the microstructure of the CGHAZ was discussed. The experimental results indicate that the microstructnre of the CGHAZ is only the granular bainite which consists of bainitic ferrite （BF） lath and M-A constituent while t8/5 is 0.3-30 s. The M-A constituent consists of twinned martensite and residual austenite, and the change of the volume fraction of the residual austenite in the M-A constituent is very small when t8/5 is between 0.3 and 30 s. The morphology of the M-A constituent obviously changes with the variation of t8/5.As t8/5 increases, tile average width, gross and shape parameter of the M-A constituent increase, while the line density of the M-A constituent decreases.

Techniques trend analysis of propagating laser beam quality measurement

Different methods of measuring a propagating laser beam quality are summarized.The disadvantages in traditional way in measuring a laser beam quality is analyzed and the insufficiencies of the Shack-Hartmannin method which is commonly using wave front technique at present is pointed out.Finally,the transmission intensity equation based(TIE-based)measuring way in a laser beam quality evaluation and the corresponding advantages are discussed,which is believed to be a deve-l oping trend in laser beam evaluation.

Experimental Stu dies of 374μm ^(15)NH_(3) Optically Pumped Far-Infrared Laser

374μm far-infrared raliation of ^(15)NH_(3) pumuped by CO_(2) laser has been studied experineutally.The fficiecncy of p11 alosorption of the pounp bean.stability of the output power aund freqpeuey were exiuined in detail.Fur the plurpose of applixution in the plasi1n diagnostirs,n copurisou with 432μm of the formic acid laser was also carried out..

Holmium Oxide Film as a Saturable Absorber for 2μm Q-Switched Fiber Laser

This work reports on the use of the holmium oxide （Ho2O3） polymer film as a saturable absorber （SA） for generating stable Q-switching pulses operating in a 2μm region in a thulium-doped fiber laser cavity. The SA is prepared by diluting a commercial Ho3O2 powder and then mixing it with polyvinyI alcohol （PVA） solution to form a Ho2O3-PVA film. A tiny part of the film about 1mm×1 mm in size is sandwiched between two fiber ferrules with the help of index matching gel. When incorporated in a laser cavity driven by a 1552-nm pump, stable Q-switching pulses are observed at 1955nm within the pump power range of 363 491 roW. As the pmnp power increases within this range, the repetition rate rises from 26 kHz to 39 kHz, as the pulse width drops from 4.22μs to 2.57μs. The laser operates with a signal-to-noise ratio of 47dB, and the maximum output power and the pulse energy obtained are 2.67mW and 69ng, respectively. Our results successfully demonstrate that the Ho2O3 film can be used as a passive SA to generate a 2μm pulse laser.