We describe a novel lab based X-ray computed tomography system based on the architecture of X-ray Microscopes (XRM) used in synchrotron radiation facilities to be adapted for mineral processing and mineral liberation ...We describe a novel lab based X-ray computed tomography system based on the architecture of X-ray Microscopes (XRM) used in synchrotron radiation facilities to be adapted for mineral processing and mineral liberation analysis. As this is a tomographic technique performed with an XRM, it is non-destructive and does not require complex preparation of polished sections typical of SEM-EDS techniques (such as MLA and QEMSCAN). It complements these existing techniques by providing 3D information and mineral liberation of multi-phase particles with much larger sample volume statistics but at a fraction of the time. In several applications, the technique is superior. These include the characterization of tailing loss in precious minerals; the characterization of porosity, particle size distribution, crack and pore network analysis during comminution, heap leaching and for texture and exposure/lock class analysis for floatation.展开更多
Direct air capture(DAC)of CO_(2)plays an indispensable role in achieving carbon-neutral goals as one of the key negative emission technologies.Since large air flows are required to capture the ultradilute CO_(2)from t...Direct air capture(DAC)of CO_(2)plays an indispensable role in achieving carbon-neutral goals as one of the key negative emission technologies.Since large air flows are required to capture the ultradilute CO_(2)from the air,lab-synthesized adsorbents in powder form may cause unacceptable gas pressure drops and poor heat and mass transfer efficiencies.A structured adsorbent is essential for the implementation of gas-solid contactors for cost-and energy-efficient DAC systems.In this study,efficient adsorbent poly(ethyleneimine)(PEI)-functionalized Mg-Al-CO_(3)layered double hydroxide(LDH)-derived mixed metal oxides(MMOs)are three-dimensional(3D)printed into monoliths for the first time with more than 90%adsorbent loadings.The printing process has been optimized by initially printing the LDH powder into monoliths followed by calcination into MMO monoliths.This structure exhibits a 32.7%higher specific surface area and a 46.1%higher pore volume,as compared to the direct printing of the MMO powder into a monolith.After impregnation of PEI,the monolith demonstrates a large adsorption capacity(1.82 mmol/g)and fast kinetics(0.7 mmol/g/h)using a CO_(2)feed gas at 400 ppm at 25℃,one of the highest values among the shaped DAC adsorbents.Smearing of the amino-polymers during the post-printing process affects the diffusion of CO_(2),resulting in slower adsorption kinetics of pre-impregnation monoliths compared to post-impregnation monoliths.The optimal PEI/MeOH ratio for the post-impregnation solution prevents pores clogging that would affect both adsorption capacity and kinetics.展开更多
文摘We describe a novel lab based X-ray computed tomography system based on the architecture of X-ray Microscopes (XRM) used in synchrotron radiation facilities to be adapted for mineral processing and mineral liberation analysis. As this is a tomographic technique performed with an XRM, it is non-destructive and does not require complex preparation of polished sections typical of SEM-EDS techniques (such as MLA and QEMSCAN). It complements these existing techniques by providing 3D information and mineral liberation of multi-phase particles with much larger sample volume statistics but at a fraction of the time. In several applications, the technique is superior. These include the characterization of tailing loss in precious minerals; the characterization of porosity, particle size distribution, crack and pore network analysis during comminution, heap leaching and for texture and exposure/lock class analysis for floatation.
基金supported by the Shanghai Agricultural Science and Technology Program (2022-02-08-00-12-F01176)he National Natural Science Foundation of China (52006135)
文摘Direct air capture(DAC)of CO_(2)plays an indispensable role in achieving carbon-neutral goals as one of the key negative emission technologies.Since large air flows are required to capture the ultradilute CO_(2)from the air,lab-synthesized adsorbents in powder form may cause unacceptable gas pressure drops and poor heat and mass transfer efficiencies.A structured adsorbent is essential for the implementation of gas-solid contactors for cost-and energy-efficient DAC systems.In this study,efficient adsorbent poly(ethyleneimine)(PEI)-functionalized Mg-Al-CO_(3)layered double hydroxide(LDH)-derived mixed metal oxides(MMOs)are three-dimensional(3D)printed into monoliths for the first time with more than 90%adsorbent loadings.The printing process has been optimized by initially printing the LDH powder into monoliths followed by calcination into MMO monoliths.This structure exhibits a 32.7%higher specific surface area and a 46.1%higher pore volume,as compared to the direct printing of the MMO powder into a monolith.After impregnation of PEI,the monolith demonstrates a large adsorption capacity(1.82 mmol/g)and fast kinetics(0.7 mmol/g/h)using a CO_(2)feed gas at 400 ppm at 25℃,one of the highest values among the shaped DAC adsorbents.Smearing of the amino-polymers during the post-printing process affects the diffusion of CO_(2),resulting in slower adsorption kinetics of pre-impregnation monoliths compared to post-impregnation monoliths.The optimal PEI/MeOH ratio for the post-impregnation solution prevents pores clogging that would affect both adsorption capacity and kinetics.
