Review of Artificial Intelligence for Oil and Gas Exploration: Convolutional Neural Network Approaches and the U-Net 3D Model

Deep learning, especially through convolutional neural networks (CNN) such as the U-Net 3D model, has revolutionized fault identification from seismic data, representing a significant leap over traditional methods. Our review traces the evolution of CNN, emphasizing the adaptation and capabilities of the U-Net 3D model in automating seismic fault delineation with unprecedented accuracy. We find: 1) The transition from basic neural networks to sophisticated CNN has enabled remarkable advancements in image recognition, which are directly applicable to analyzing seismic data. The U-Net 3D model, with its innovative architecture, exemplifies this progress by providing a method for detailed and accurate fault detection with reduced manual interpretation bias. 2) The U-Net 3D model has demonstrated its superiority over traditional fault identification methods in several key areas: it has enhanced interpretation accuracy, increased operational efficiency, and reduced the subjectivity of manual methods. 3) Despite these achievements, challenges such as the need for effective data preprocessing, acquisition of high-quality annotated datasets, and achieving model generalization across different geological conditions remain. Future research should therefore focus on developing more complex network architectures and innovative training strategies to refine fault identification performance further. Our findings confirm the transformative potential of deep learning, particularly CNN like the U-Net 3D model, in geosciences, advocating for its broader integration to revolutionize geological exploration and seismic analysis.

Modeling Methods of 3D Model in Digital Twins

To understand the current application and development of 3D modeling in Digital Twins(DTs),abundant literatures on DTs and 3D modeling are investigated by means of literature review.The transition process from 3D modeling to DTs modeling is analyzed,as well as the current application of DTs modeling in various industries.The application of 3D DTs modeling in the􀀀elds of smartmanufacturing,smart ecology,smart transportation,and smart buildings in smart cities is analyzed in detail,and the current limitations are summarized.It is found that the 3D modeling technology in DTs has broad prospects for development and has a huge impact on all walks of life and even human lifestyles.At the same time,the development of DTs modeling relies on the development and support capabilities of mature technologies such as Big Data,Internet of Things,Cloud Computing,Articial Intelligence,and game technology.Therefore,although some results have been achieved,there are still limitations.This work aims to provide a good theoretical support for the further development of 3D DTs modeling.

3D Model Occlusion Culling Optimization Method Based on WebGPU Computing Pipeline

Nowadays,Web browsers have become an important carrier of 3D model visualization because of their convenience and portability.During the process of large-scale 3D model visualization based on Web scenes with the problems of slow rendering speed and low FPS(Frames Per Second),occlusion culling,as an important method for rendering optimization,can remove most of the occluded objects and improve rendering efficiency.The traditional occlusion culling algorithm(TOCA)is calculated by traversing all objects in the scene,which involves a large amount of repeated calculation and time consumption.To advance the rendering process and enhance rendering efficiency,this paper proposes an occlusion culling with three different optimization methods based on the WebGPU Computing Pipeline.Firstly,for the problem of large amounts of repeated calculation processes in TOCA,these units are moved from the CPU to the GPU for parallel computing,thereby accelerating the calculation of the Potential Visible Sets(PVS);Then,for the huge overhead of creating pipeline caused by too many 3D models in a certain scene,the Breaking Occlusion Culling Algorithm(BOCA)is introduced,which removes some nodes according to building a Hierarchical Bounding Volume(BVH)scene tree to reduce the overhead of creating pipelines;After that,the structure of the scene tree is transmitted to the GPU in the order of depth-first traversal and finally,the PVS is obtained by parallel computing.In the experiments,3D geological models with five different scales from 1:5,000 to 1:500,000 are used for testing.The results show that the proposed methods can reduce the time overhead of repeated calculation caused by the computing pipeline creation and scene tree recursive traversal in the occlusion culling algorithm effectively,with 97%rendering efficiency improvement compared with BOCA,thereby accelerating the rendering process on Web browsers.

3D Model Construction and Ecological Environment Investigation on a Regional Scale Using UAV Remote Sensing

The acquisition of digital regional-scale information and ecological environmental data has high requirements for structural texture,spatial res-olution,and multiple parameter categories,which is challenging to achieve using satellite remote sensing.Considering the convenient,facilitative,and flexible characteristics of UAV(unmanned air vehicle)remote sensing tech-nology,this study selects a campus as a typical research area and uses the Pegasus D2000 equipped with a D-MSPC2000 multi-spectral camera and a CAM3000 aerial camera to acquire oblique images and multi-spectral data.Using professional software,including Context Capture,ENVI,and ArcGIS,a 3D(three-dimensional)campus model,a digital orthophoto map,and multi-spectral remote sensing map drawing are realized,and the geometric accuracy of typical feature selection is evaluated.Based on a quantitative remote sensing model,the campus ecological environment assessment is performed from the perspectives of vegetation and water body.The results presented in this study could be of great significance to the scientific management and sustainable development of regional natural resources.

Survey of lightweighting methods of huge 3D models for online Web3D visualization

Background With the rapid development of Web3D technologies, the online Web3D visualization, particularly for complex models or scenes, has been in a great demand. Owing to the major conflict between the Web3D system load and resource consumption in the processing of these huge models, the huge 3D model lightweighting methods for online Web3D visualization are reviewed in this paper. Methods By observing the geometry redundancy introduced by man-made operations in the modeling procedure, several categories of light-weighting related work that aim at reducing the amount of data and resource consumption are elaborated for Web3D visualization. Results By comparing perspectives, the characteristics of each method are summarized, and among the reviewed methods, the geometric redundancy removal that achieves the lightweight goal by detecting and removing the repeated components is an appropriate method for current online Web3D visualization. Meanwhile, the learning algorithm, still in improvement period at present, is our expected future research topic. Conclusions Various aspects should be considered in an efficient lightweight method for online Web3D visualization, such as characteristics of original data, combination or extension of existing methods, scheduling strategy, cache man-agement, and rendering mechanism. Meanwhile, innovation methods, particularly the learning algorithm, are worth exploring.

3D Modeling and Estimation of the Tonnage of the Granite Quarry of Linguésso (North-West of Côte d’Ivoire) by Electrical Methods

A survey and evaluation was carried out on a potential granitoid quarry site in the locality of Linguésso (North West of Ivory Coast) with the aim of identifying and estimating the quantity of exploitable granite based on the electrical resistivity methods. The combination of electrical trailing, sounding and tomography techniques allowed the determination of the characteristics of the rock deposit, namely the electrical signature (between 19,259 Ωm and 86,316 Ωm), the extension (N90°), the rooting (between 0 and 45 m) and the fracturing (between N14° and N160°) of the granitic formation sought. The modeling resulted in an estimated mineable rock volume of 2,936,250 m3 providing a production quantity of 7,927,875 tonnes.

Structure,Binding Characteristics,and 3D Model Prediction of a Newly Identified Odorant-Binding Protein from the Cotton Bollworm,Helicoverpa armigera (Hübner)

The full-length sequence of the odorant binding protein 5 gene,HarmOBP5,was obtained from an antennae cDNA library of cotton bollworm,Helicoverpa armigera （Hübner）.The cDNA contains a 444 bp open reading frame,encoding a protein with 147 amino acids,namely HarmOBP5.HarmOBP5 was expressed in Escherichia coli and the recombinant protein was purified by affinity chromatography.SDS-PAGE and Western blot analysis demonstrated that the purified protein can be used for further investigation of its binding characteristics.Competitive binding assays with 113 odorant chemicals indicated that HarmOBP5 has strong affinity to some special plant volatiles,including （E）-β-farnesene,ethyl butyrate,ethyl heptanoate,and acetic acid 2-methylbutyl ester.Based on three-dimensional （3D） model of AaegOBP1 from Aedes aegypti,a 3D model of HarmOBP5 was predicted.The model revealed that some key binding residues in HarmOBP5 may play important roles in odorant perception of H.armigera.This study provides clues for better understanding physiological functions of OBPs in H.armigera and other insects.

High Efficient Methods of Content-based 3D Model Retrieval

Content-based 3D model retrieval is of great help to facilitate the reuse of existing designs and to inspire designers during conceptual design. However, there is still a gap to apply it in industry due to the low time efficiency. This paper presents two new methods with high efficiency to build a Content-based 3D model retrieval system. First, an improvement is made on the ＂Shape Distribution （D2）＂ algorithm, and a new algorithm named ＂Quick D2＂ is proposed. Four sample 3D mechanical models are used in an experiment to compare the time cost of the two algorithms. The result indicates that the time cost of Quick D2 is much lower than that of D2, while the descriptors extracted by the two algorithms are almost the same. Second, an expandable 3D model repository index method with high performance, namely, RBK index, is presented. On the basis of RBK index, the search space is pruned effectively during the search process, leading to a speed up of the whole system. The factors that influence the values of the key parameters of RBK index are discussed and an experimental method to find the optimal values of the key parameters is given. Finally, ＂3D Searcher＂, a content-based 3D model retrieval system is developed. By using the methods proposed, the time cost for the system to respond one query online is reduced by 75% on average. The system has been implemented in a manufacturing enterprise, and practical query examples during a case of the automobile rear axle design are also shown. The research method presented shows a new research perspective and can effectively improve the content-based 3D model retrieval efficiency.

Influence of formation heterogeneity on foam flooding performance using 2D and 3D models:an experimental study

The formation heterogeneity is considered as one of the major factors limiting the application of foam flooding.In this paper,influences of formation properties,such as permeability,permeability distribution,interlayer,sedimentary rhythm and 3D heterogeneity,on the mobility control capability and oil displacement efficiency of foam flooding,were systematically investigated using 2D homogeneous and 2D/3D heterogeneous models under 120°C and salinity of 20×10~4 mg/L.The flow resistance of foam was promoted as the permeability increased,which thus resulted in a considerable oil recovery behavior.In the scenario of the vertical heterogeneous formations,it was observed that the permeability of the high-permeable layer was crucial to foam mobility control,and the positive rhythm appeared favorable to improve the foam flooding performance.The additional oil recovery increased to about 40%.The interlayer was favorable for the increases in mobility reduction factor and oil recovery of foam flooding when the low permeability ratio was involved.For the 3D heterogeneous formations,foam could efficiently adjust the areal and vertical heterogeneity through mobility control and gravity segregation,and thus enhancing the oil recovery to 11%–14%.The results derived from this work may provide some insight for the field test designs of foam flooding.

Building Information Modeling-Based Secondary Development System for 3D Modeling of Underground Pipelines

Underground pipeline networks constitute a major component of urban infrastructure,and thus,it is imperative to have an efficient mechanism to manage them.This study introduces a secondary development system to efficiently model underground pipeline networks,using the building information modeling(BIM)-based software Revit.The system comprises separate pipe point and tubulation models.Using a Revit application programming interface(API),the spatial position and attribute data of the pipe points are extracted from a pipeline database,and the corresponding tubulation data are extracted from a tubulation database.Using the Family class in Revit API,the cluster in the self-built library of pipe point is inserted into the spatial location and the attribute data is added;in the same way,all pipeline instances in the pipeline system are created.The extension and localization of the model accelerated the modeling speed.The system was then used in a real construction project.The expansion of the model database and rapid modeling made the application of BIM technology in three-dimensional visualization of underground pipeline networks more convenient.Furthermore,it has applications in pipeline engineering construction and management.

3D Modelling of Biological Systems for Biomimetics

With the advanced development of computer-based enabling technologies, many engineering, medical, biology, chemistry, physics and food science etc have developed to the unprecedented levels, which lead to many research and development interests in various multi-discipline areas. Among them, biomimetics is one of the most promising and attractive branches of study. Biomimetics is a branch of study that uses biological systems as a model to develop synthetic systems. To learn from nature, one of the fundamental issues is to understand the natural systems such animals, insects, plants and human beings etc. The geometrical characterization and representation of natural systems is an important fundamental work for biomimetics research. 3D modeling plays a key role in the geometrical characterization and representation, especially in computer graphical visualization. This paper firstly presents the typical procedure of 3D modelling methods and then reviews the previous work of 3D geometrical modelling techniques and systems developed for industrial, medical and animation applications. Especially the paper discusses the problems associated with the existing techniques and systems when they are applied to 3D modelling of biological systems. Based upon the discussions, the paper proposes some areas of research interests in 3D modelling of biological systems and for Biomimetics.

Angiogenesis in a 3D model containing adipose tissue stem cells and endothelial cells is mediated by canonical Wnt signaling

Adipose-derived stromal cells （ASCs） have gained great attention in regenerative medicine. Progress in our understanding of adult neovascularization further suggests the potential of ASCs in promoting vascular regeneration, although the specific cues that stimulate their angiogenic behavior remain controversial In this study, we established a three-dimensional （3D） angiogenesis model by co-culturing ASCs and endothelial cells （ECs） in collagen gel and found that ASC-EC-instructed angiogenesis was regulated by the canonical Wnt pathway. Furthermore, the angiogenesis that occurred in implants collected after injections of our collagen gel- based 3D angiogenesis model into nude mice was confirmed to be functional and also regulated by the canonical Wnt pathway. Wnt regulation of angiogenesis involving changes in vessel length, vessel density, vessel sprout, and connection numbers occurred in our system. Wnt signaling was then shown to regulate ASC- mediated paracrine signaling during angiogenesis through the nuclear translocation of β-catenin after its cytoplasmic accumulation in both ASCs and ECs. This translocation enhanced the expression of nuclear cofactor Lef-1 and cyclin D1 and activated the angiogenic transcription of vascular endothelial growth factor A （VEGFA）, basic fibroblast growth factor （bFGF）, and insulin-like growth factor 1 （IGF-1）. The angiogenesis process in the 3D collagen model appeared to follow canonical Wnt signaling, and this model can help us understand the importance of the canonical Wnt pathway in the use of ASCs in vascular regeneration.

3D Model Retrieval Method Based on Affinity Propagation Clustering

In order to improve the accuracy and efficiency of 3D model retrieval,the method based on affinity propagation clustering algorithm is proposed. Firstly,projection ray-based method is proposed to improve the feature extraction efficiency of 3D models. Based on the relationship between model and its projection,the intersection in 3D space is transformed into intersection in 2D space,which reduces the number of intersection and improves the efficiency of the extraction algorithm. In feature extraction,multi-layer spheres method is analyzed. The two-layer spheres method makes the feature vector more accurate and improves retrieval precision. Secondly,Semi-supervised Affinity Propagation ( S-AP) clustering is utilized because it can be applied to different cluster structures. The S-AP algorithm is adopted to find the center models and then the center model collection is built. During retrieval process,the collection is utilized to classify the query model into corresponding model base and then the most similar model is retrieved in the model base. Finally,75 sample models from Princeton library are selected to do the experiment and then 36 models are used for retrieval test. The results validate that the proposed method outperforms the original method and the retrieval precision and recall ratios are improved effectively.

Integrating deep learning and logging data analytics for lithofacies classification and 3D modeling of tight sandstone reservoirs

The lithofacies classification is essential for oil and gas reservoir exploration and development.The traditional method of lithofacies classification is based on"core calibration logging"and the experience of geologists.This approach has strong subjectivity,low efficiency,and high uncertainty.This uncertainty may be one of the key factors affecting the results of 3 D modeling of tight sandstone reservoirs.In recent years,deep learning,which is a cutting-edge artificial intelligence technology,has attracted attention from various fields.However,the study of deep-learning techniques in the field of lithofacies classification has not been sufficient.Therefore,this paper proposes a novel hybrid deep-learning model based on the efficient data feature-extraction ability of convolutional neural networks(CNN)and the excellent ability to describe time-dependent features of long short-term memory networks(LSTM)to conduct lithological facies-classification experiments.The results of a series of experiments show that the hybrid CNN-LSTM model had an average accuracy of 87.3%and the best classification effect compared to the CNN,LSTM or the three commonly used machine learning models(Support vector machine,random forest,and gradient boosting decision tree).In addition,the borderline synthetic minority oversampling technique(BSMOTE)is introduced to address the class-imbalance issue of raw data.The results show that processed data balance can significantly improve the accuracy of lithofacies classification.Beside that,based on the fine lithofacies constraints,the sequential indicator simulation method is used to establish a three-dimensional lithofacies model,which completes the fine description of the spatial distribution of tight sandstone reservoirs in the study area.According to this comprehensive analysis,the proposed CNN-LSTM model,which eliminates class imbalance,can be effectively applied to lithofacies classification,and is expected to improve the reality of the geological model for the tight sandstone reservoirs.

The Comparison of Different Degree of Convexity and 3D Modeling of Involute Hyperbolic Arch Dam

Because of good quality of compressive resistance, the hyperbolic arch dam is being increasingly applied to engineering projects. In order to satisfy the needs of compressive resistance under the conditions of high water pressure, a stress analysis is required for the dam. During the stress analysis process however, due to the complexity of the three-dimensional modeling, it is very hard to form a model. Therefore, the stress analysis process is a barrier for the arch dam. In this article, based on the research of the new line-type arch dam, a mathematical model in different degree of convexity conditions of the dam is established; using the C ＋ ＋ language program, a computer three-dimensional model simulation is realized on AutoCAD. The accurate three-dimensional model is providing a finite element optimization design of the involute hyperbolic arch dam for the next step.

Survey of 3D modeling using depth cameras

Three-dimensional(3D)modeling is an important topic in computer graphics and computer vision.In recent years,the introduction of consumer-grade depth cameras has resulted in profound advances in 3D modeling.Starting with the basic data structure,this survey reviews the latest developments of 3D modeling based on depth cameras,including research works on camera tracking,3D object and scene reconstruction,and high-quality texture reconstruction.We also discuss the future work and possible solutions for 3D modeling based on the depth camera.

A 3D Model Reconstruction Method Using Slice Images

Abstract：reconstruction method using slice im-ages is proposed. Wanting to extract the outermost contours from slice images, the method of the improved GVF-Snake model with optimized force field and ray method is employed. And then, the 3D model is reconstructed by contour connection using the im-proved shortest diagonal method and judgment function of contour fracture. The results show that the accuracy of reconstruction 3D model is improved.

Urban 3D modeling using mobile laser scanning:a review

Mobile laser scanning(MLS)systems mainly comprise laser scanners and mobile mapping platforms.Typical MLS systems can acquire three-dimensional point clouds with 1-10cm point spacings at a normal driving or walking speed in streets or indoor environments.The efficiency and stability of these systems make them extremely useful for application in three-dimensional urban modeling.This paper reviews the latest advances of the LiDAR-based mobile mapping system(MMS)point cloud in the field of 3D modeling,including LiDAR simultaneous localization and mapping,point cloud registration,feature extraction,object extraction,semantic segmentation,and processing using deep learning.Furthermore,typical urban modeling applications based on MMS are also discussed.

Disharmonious Ventricular Relationship and Topology for the Given Atrioventricular Connections.Contemporary Diagnostic Approach Using 3D Modeling and Printing

In the last issue,two case reports separately present examples of the extremely rare and complex congenital heart diseases that show concordant atrioventricular connections to the L-looped ventricles in the presence of situs solitus.Both cases highlight that the relationship between the two ventricles within the ventricular mass is not always harmonious with the given atrioventricular connection.Such disharmony between the connections and relationships requires careful assessment of the three basic facets of cardiac building blocks,namely their morphology,the relationship of their component parts,and their connections with the adjacent segments.3D imaging and printing can now facilitate an otherwise difficult diagnosis in such complex situations.Rotation of either the 3D images or the models permit accurate assessment of the ventricular topologic pattern by creating the right ventricular en-face septal view,thus facilitating placement of the observer’s hands.As we now emphasize,an alternative approach,which might prove more attractive to imagers,is to rotate the ventricular mass to provide the ventricular apical view,thus permitting determination of the ventricular relationship without using the hands.