期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
Dosimetric Characteristics of 6 MV Medical Linac at BAEC
1
作者 Sudeb Kumar Roy Pretam Kumar Das +4 位作者 Rajada Khatun Md. Ashikur Rahman Shirin Akter Tushar Kumar Mohammad Monjur Ahasan 《International Journal of Medical Physics, Clinical Engineering and Radiation Oncology》 2021年第1期38-46,共9页
Dosimetric characteristic is one of the essential parameters of a medical linear accelerator (LINAC), which must be obtained before clinical use. The dosimetric characteristics for 6 MV photon beam were measured and c... Dosimetric characteristic is one of the essential parameters of a medical linear accelerator (LINAC), which must be obtained before clinical use. The dosimetric characteristics for 6 MV photon beam were measured and compared with the corresponding published data. The study was done using a Varian linear accelerator (Model Clinac-iX) at the Institute of Nuclear Medical Physics (INMP), AERE, Savar, Dhaka, under the Bangladesh Atomic Energy Commission (BAEC). The data is taken for 10 field sizes (2 × 2, 3 × 3, 5 × 5, 7 × 7, 10 × 10, 15 × 15, 20 × 20, 25 × 25, 30 × 30 and 40 × 40 cm<sup>2</sup>) at same conditions. The measured Percent Depth Dose (PDD) curves were obtained for 6 MV photon beams with the field as mentioned above and compared with the calculated PDD curves. The measured depth dose (D<sub>max</sub>) for reference field size (FS) 10 × 10 cm<sup>2</sup> is 15.99 mm, and the PDD at 10 cm depth (D<sub>10</sub>) is 66.87% for 6 MV photon energies that are found to be compatible with the published report BJR supplement 25. The measured PDD curves for photon energies show a good agreement with the standard PDD curves. The photon beam dosimetry data found in the current study are compatible and all the tolerances are within the clinically acceptable tolerance limit. 展开更多
关键词 Linac Machines 3d water phantom Ionization Chamber ELECTROMETER
下载PDF
AD200三维水模体自动测量系统的研制 被引量:1
2
作者 黎静 李凡 何伟 《中国测试技术》 2007年第5期47-49,共3页
为了给放射治疗提供准确量值,确保放射治疗的疗效和患者安全,研制了AD200三维水模体自动测量系统。该系统采用微处理器、计算机和传动机构等高新技术,具有自动化程度高、工作稳定可靠、测量快速和操作简便等特点。因此它不仅使用在医院... 为了给放射治疗提供准确量值,确保放射治疗的疗效和患者安全,研制了AD200三维水模体自动测量系统。该系统采用微处理器、计算机和传动机构等高新技术,具有自动化程度高、工作稳定可靠、测量快速和操作简便等特点。因此它不仅使用在医院放疗设备的日常质量保证中,而且对新设备的安装验收、设备大修后的检测以及治疗计划系统所需要的大量数据,会发挥更大的作用。 展开更多
关键词 三维水模体 剂量 测量 系统 参数
下载PDF
某质子治疗系统三维水箱测量用水中^(7)Be和另一全能峰的发现与探讨
3
作者 许家昂 苏静 +4 位作者 傅强 宋钢 闵楠 王小山 陈英民 《中国辐射卫生》 2022年第3期306-310,共5页
目的对某质子治疗系统三维水箱测量用水中发现的^(7)Be和短半衰期77.2 keV全能峰进行了初步探讨。方法依据《水中放射性核素的γ能谱分析方法》(GB/T 16140—2018)对某质子治疗系统三维水箱测量用水样品进行测量。结果2018年12月24日三... 目的对某质子治疗系统三维水箱测量用水中发现的^(7)Be和短半衰期77.2 keV全能峰进行了初步探讨。方法依据《水中放射性核素的γ能谱分析方法》(GB/T 16140—2018)对某质子治疗系统三维水箱测量用水样品进行测量。结果2018年12月24日三维水箱测量用水样品中^(7)Be的活度浓度为1.30×10^(1)Bq·L^(−1),2019年3月22日其活度浓度为4.3 Bq·L^(−1);采样时(2018年12月19日)其活度浓度为1.41×10^(1)Bq·L^(−1)。2018年12月24日样品中77.2 keV全能峰的净峰面积为(683±45),测量时间为26123.02 s;2019年3月22日其净峰面积已降至本底水平(194±49),测量时间为86400.00 s。结论质子治疗系统三维水箱测量用水^(7)Be的产生,主要与高能中子与水中的氧发生散裂反应有关;另外,还发现了短半衰期77.2 keV全能峰。该样品中^(7)Be的活度浓度低于豁免水平,取样时其活度浓度未必是质控过程中的最大活度浓度。质子治疗系统放射性职业病危害评价应对三维水箱测量用水产生的感生放射性核素^(7)Be进行识别并适当评价。 展开更多
关键词 质子加速器 三维水箱测量用水 Γ能谱 ^(7)Be活度浓度 感生放射性
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部