AHermitian C^(2) Differential Reproducing Kernel Interpolation Meshless Method for the 3D Microstructure-Dependent Static Flexural Analysis of Simply Supported and Functionally Graded Microplates

This work develops a Hermitian C^(2) differential reproducing kernel interpolation meshless(DRKIM)method within the consistent couple stress theory(CCST)framework to study the three-dimensional(3D)microstructuredependent static flexural behavior of a functionally graded(FG)microplate subjected to mechanical loads and placed under full simple supports.In the formulation,we select the transverse stress and displacement components and their first-and second-order derivatives as primary variables.Then,we set up the differential reproducing conditions(DRCs)to obtain the shape functions of the Hermitian C^(2) differential reproducing kernel(DRK)interpolant’s derivatives without using direct differentiation.The interpolant’s shape function is combined with a primitive function that possesses Kronecker delta properties and an enrichment function that constituents DRCs.As a result,the primary variables and their first-and second-order derivatives satisfy the nodal interpolation properties.Subsequently,incorporating ourHermitianC^(2)DRKinterpolant intothe strong formof the3DCCST,we develop a DRKIM method to analyze the FG microplate’s 3D microstructure-dependent static flexural behavior.The Hermitian C^(2) DRKIM method is confirmed to be accurate and fast in its convergence rate by comparing the solutions it produces with the relevant 3D solutions available in the literature.Finally,the impact of essential factors on the transverse stresses,in-plane stresses,displacements,and couple stresses that are induced in the loaded microplate is examined.These factors include the length-to-thickness ratio,the material length-scale parameter,and the inhomogeneity index,which appear to be significant.

In-situ 3D contour measurement for laser powder bed fusion based on phase guidance

In-situ layerwise imaging measurement of laser powder bed fusion(LPBF)provides a wealth of forming and defect data which enables monitoring of components quality and powder bed homogeneity.Using high-resolution camera layerwise imaging and image processing algorithms to monitor fusion area and powder bed geometric defects has been studied by many researchers,which successfully monitored the contours of components and evaluated their accuracy.However,research for the methods of in-situ 3D contour measurement or component edge warping identification is rare.In this study,a 3D contour mea-surement method combining gray intensity and phase difference is proposed,and its accuracy is verified by designed experiments.The results show that the high-precision of the 3D contours can be achieved by the constructed energy minimization function.This method can detect the deviations of common ge-ometric features as well as warpage at LPBF component edges,and provides fundamental data for in-situ quality monitoring tools.

3D Artificial Array Interface Engineering Enabling Dendrite-Free Stable Zn Metal Anode

The ripple effect induced by uncontrollable Zn deposition is considered as the Achilles heel for developing high-performance aqueous Zn-ion batteries.For this problem,this work reports a design concept of 3D artificial array interface engineering to achieve volume stress elimination,preferred orientation growth and dendrite-free stable Zn metal anode.The mechanism of MXene array interface on modulating the growth kinetics and deposition behavior of Zn atoms were firstly disclosed on the multi-scale level,including the in-situ optical microscopy and transient simulation at the mesoscopic scale,in-situ Raman spectroscopy and in-situ X-ray diffraction at the microscopic scale,as well as density functional theory calculation at the atomic scale.As indicated by the electrochemical performance tests,such engineered electrode exhibits the comprehensive enhancements not only in the resistance of corrosion and hydrogen evolution,but also the rate capability and cyclic stability.High-rate performance(20 mA cm^(-2))and durable cycle lifespan(1350 h at 0.5 mA cm^(-2),1500 h at 1 mA cm^(-2)and 800 h at 5 mA cm^(-2))can be realized.Moreover,the improvement of rate capability(214.1 mAh g^(-1)obtained at 10 A g^(-1))and cyclic stability also can be demonstrated in the case of 3D MXene array@Zn/VO2battery.Beyond the previous 2D closed interface engineering,this research offers a unique 3D open array interface engineering to stabilize Zn metal anode,the controllable Zn deposition mechanism revealed is also expected to deepen the fundamental of rechargeable batteries including but not limited to aqueous Zn metal batteries.

A new design of 3D-printed orthopedic bone plates with auxeticstructures to mitigate stress shielding and improve intra-operative bending

Orthopedic bone plates are most commonly used for bone fracture fixation for more than 100 years.The bone plate design had evolved over time overcoming many challenges such as insufficient strength and excessive plate–bone contact affecting the blood circulation.However,it is only made of two materials,either stainless steel(AISI 316L)or titanium(Ti–6Al–4V).There are two main limitations of metallic bone implants,namely stress shielding and the problem of malocclusion caused by the displacement of the fracture site during healing.To overcome the two problems,a new bone plate design with the incorporation of auxetic structures is proposed in this work.This study aims to use auxetic structure section in the bone plate that would decrease the stiffness of the region,thereby mitigating the stress-shielding effect and at the same time act as a deformable section to enable intra-operative bending for effective alignment while having enough bending strength and stiffness.Two different auxetic structures namely re-entrant honeycomb and missing rib structures were considered.The auxetic structure incorporated bone plates were designed,finite element analysis was done,fabricated using direct metal laser sintering technique,and tested.The results indicate that the re-entrant honeycomb structure incorporated bone plates serve as an effective bone design compared to the conventional bone plate design,in terms of stress shielding and intra-operative bending while offering similar mechanical and bending strength.

Elastoplastic 3D Deformation and Stress Analysis of Strip Rolling

An elastoplastic method for analyzing the 3D deformation, stress and transverse distribution of tension stress during cold strip rolling is developed. The analysis is based on the elastoplastic variational principle in which a kinematically admissible velocity field is constructed with the lateral flow function as an unknown function. The stress distribution and volume strain distribution are obtained by solving the simultaneous equations formed by the longitudinal differential equation of equilibrium and constitutive equations. The lateral flow function is determined by minimizing the total energy dissipation rate. Experimental investigation was carried out on a reversible cold mill. The front tension stress distributions in cold rolled strips were measured by a multi roll segmented tension sensing shapemeter. The calculated results are in good agreement with the measured ones.

3D morphology and formation mechanism of fractures developed by true triaxial stress

As main part of underground rock mass,the three-dimensional(3D)morphology of natural fractures plays an important role in rock mass stability.Based on previous studies on 3D morphology,this study probes into the law and mechanism regarding the influence of the confining pressure constraints on 3D morphological features of natural fractures.First,fracture surfaces were obtained by true triaxial compression test and 3D laser scanning.Then 3D morphological parameters of fractures were calculated by using Grasselli’s model.The results show that the failure mode of granites developed by true triaxial stress can be categorized into tension failure and shear failure.Based on the spatial position of fractures,they can be divided into tension fracture surface,S-1 shear fracture surface,and S-2 shear fracture surface.Micro-failure of the tension fracture surface is dominated by mainly intergranular fracture;the maximum height of asperities on the fracture surface and the 3D roughness of fracture surfaces are influenced by σ_(3) only and they are greater than those of shear fracture surfaces,a lower overall uniformity than tension fracture surface.S-1 shear fracture surface and S-2 shear fracture surface are dominated by intragranular and intergranular coupling fracture.The maximum height of asperities on the fracture surface and 3D roughness of fracture surface are affected by σ_(1),σ_(2),and σ_(3).With the increase of σ_(2) or σ_(3),the cutting off of asperities on the fracture surface becomes more common,the maximum height of asperities and 3D roughness of fracture surface further decrease,and the overall uniformity gets further improved.The experimental results are favorable for selecting technical parameters of enhanced geothermal development and the safety of underground mine engineering.

3D numerical simulation of heterogeneous in situ stress field in low-permeability reservoirs

Analysis of the in situ stress orientation and magnitude in the No.4 Structure of Nanpu Sag was performed on the basis of data obtained from borehole breakout and acoustic emission measurements.On the basis of mechanical experiments,logging interpretation,and seismic data,a 3 D geological model and heterogeneous rock mechanics field of the reservoir were constructed.Finite element simulation techniques were then used for the detailed prediction of the 3 D stress field.The results indicated that the maximum horizontal stress orientation in the study area was generally NEE-SWW trending,with significant changes in the in situ stress orientation within and between fault blocks.Along surfaces and profiles,stress magnitudes were discrete and the in situ stress belonged to theⅠa-type.Observed inter-strata differences were characterized as five different types of in situ stress profile.Faults were the most important factor causing large distributional differences in the stress field of reservoirs within the complex fault blocks.The next important influence on the stress field was the reservoir’s rock mechanics parameters,which impacted on the magnitudes of in situ stress magnitudes.This technique provided a theoretical basis for more efficient exploration and development of low-permeability reservoirs within complex fault blocks.

Mathematical Modelling and 3D FEM Analysis of the Influence of Initial Stresses on the ERR in a Band Crack’s Front in the Rectangular Orthotropic Thick Plate

This paper deals with the mathematical modelling and 3D FEM study of the energy release rate(ERR)in the band crack’s front contained in the orthotropic thick rectangular plate which is stretched or compressed initially before the loading of the crack's edge planes.The initial stretching or compressing of the plate causes uniformly distributed normal stress to appear acting in the direction which is parallel to the plane on which the band crack is located.After the appearance of the initial stress in the plate it is assumed that the crack's edge planes are loaded with additional uniformly distributed normal forces and the ERR caused with this additional loading is studied.The corresponding boundary value problem is formulated within the scope of the so-called 3D linearized theory of elasticity which allows the initial stress on the values of the ERR to be taken into consideration.Numerical results on the influence of the initial stress,anisotropy properties of the plate material,the crack’s length and its distance from the face planes of the plate on the values of the ERR,are presented and discussed.In particular,it is established that for the relatively greater length of the crack’s band,the initial stretching of the plate causes a decrease,but the initial compression causes an increase in the values of the ERR.

Modeling and simulation of 3D thermal stresses of large-sized castings in solidification processes

When heavy machines and large scaled receiver system of communication equipment are manufactured, it always needs to produce large-sized steel castings, aluminum castings and etc. Some defects of hot cracking by thermal stress often appear during solidification process as these castings are produced, which results in failure of castings. Therefore predicting the effects of technological parameters for production of castings on the thermal stress during solidification process becomes an important means. In this paper, the mathematical models have been established and numerical calculation of temperature fields by using finite difference method (FDM) and then thermal stress fields by using finite element method (FEM) during solidification process of castings have been carried out. The technological parameters of production have been optimized by the results of calculation and the defects of hot cracking have been eliminated. Modeling and simulation of 3D thermal stress during solidification processes of large-sized castings provided a scientific basis, which promoted further development of advanced manufacturing technique.

Characterization of 3D pore nanostructure and stress-dependent permeability of organic-rich shales in northern Guizhou Depression,China

The three-dimensional(3D)pore structures and permeability of shale are critical for forecasting gas production capacity and guiding pressure differential control in practical reservoir extraction.However,few investigations have analyzed the effects of microscopic organic matter(OM)morphology and 3D pore nanostructures on the stress sensitivity,which are precisely the most unique and controlling factors of reservoir quality in shales.In this study,ultra-high nanoscale-resolution imaging experiments,i.e.focused ion beam-scanning electron microscopy(FIB-SEMs),were conducted on two organic-rich shale samples from Longmaxi and Wufeng Formations in northern Guizhou Depression,China.Pore morphology,porosity of 3D pore nanostructures,pore size distribution,and connectivity of the six selected regions of interest(including clump-shaped OMs,interstitial OMs,framboidal pyrite,and microfractures)were qualitatively and quantitatively characterized.Pulse decay permeability(PDP)measurement was used to investigate the variation patterns of stress-dependent permeability and stress sensitivity of shales under different confining pressures and pore pressures,and the results were then used to calculate the Biot coefficients for the two shale formations.The results showed that the samples have high OM porosity and 85%of the OM pores have the radius of less than 40 nm.The OM morphology and pore structure characteristics of the Longmaxi and Wufeng Formations were distinctly different.In particular,the OM in the Wufeng Formation samples developed some OM pores with radius larger than500 nm,which significantly improved the connectivity.The macroscopic permeability strongly depends on the permeability of OM pores.The stress sensitivity of permeability of Wufeng Formation was significantly lower than that of Longmaxi Formation,due to the differences in OM morphology and pore structures.The Biot coefficients of 0.729 and 0.697 were obtained for the Longmaxi and Wufeng Formations,respectively.

Study on Asymmetric Deformation Law and Surrounding Rock Control Technology of High Stress Soft Rock Crossing Roadway

In order to solve the problem of asymmetric large deformation of high-stress soft rock crossing roadway under complex geological conditions in deep mines, taking the 2# total return airway of 76.2# section of Wuyang Coal Mine as the engineering background, the causes of asymmetric deformation and failure of soft rock crossing roadway in deep mines were summarized and analyzed by means of field investigation, theoretical analysis and numerical simulation, and the asymmetric high-efficiency support technology with large row spacing was studied. The results show that the lithology of roadway strata is the main cause of asymmetric deformation and failure of roadway. The shape change of roadway is not the main influencing factor of asymmetric deformation of roadway, but for the control of roadway surrounding rock, the straight wall semi-circular arch roadway is better than the rectangular roadway. The field industrial test shows that after adopting the new support design scheme, the displacement of the roof and floor of the roadway is reduced by 86.39% compared with the original support design scheme, and the displacement of the two sides of the roadway is reduced by 86.05% compared with the original support design scheme, which can ensure the normal and safe production of the roadway during the service period, and provide reference for the support design of other similar geological conditions.

Stress Analysis on Single-Crystal Diamonds by Raman Spectroscopy 3D Mapping

Results on stress analysis for single-crystal diamonds are presented. Isolated crystals were studied by Raman mapping and depth profiling techniques, using confocal microscopy. Diamonds were deposited on molybdenum and tantalum by hot filament and microwave CVD methods at growth rates between 10 and 30 μm·h-1. Crystals from 10 to 40 μm size were examined. Local stress was evaluated by analyzing the position, broadening and splitting of the 1332 cm-1 Raman peak in a 3D mapping. For the (001) orientation, the most stressed zone was found at the center of the crystal base, close to the interface with the substrate: a Raman peak around 1340 cm-1 was measured, corresponding to a pressure c.a. 3 GPa, according to our dynamical calculations. This peak disappears few microns out of the center, suggesting that this highly concentrated stress sector was the nucleation zone of the crystal. A shifting and slight broadening of the 1332 cm-1 band was observed in the rest of the crystal. The causes of these effects are discussed: they proved not to be due to anisotropic stress but to refractive effects. Same results were found for different crystal sizes and growth rates.

Anti-post-traumatic stress disorder effect of dopamine D3 receptor antagonist

OBJECTIVE To explore the antipost-traumatic-stress-disorder(PTSD) effects and its probable mechanism of YQA14,a dopamine D3 receptor antagonist.METHODS Two PTSD animal models,the rat single prolonged stress(SPS) model and the mouse pre-shock model,were used in this experiment.In the SPS model,adult male Sprague-Dawley(SD) rats were randomly divided into control group,model group,positive group and YQA14 groups with different dosages.In the mouse pre-chock model,dopamine D3 receptor knockout(KO) and wild type(WT) mice were randomly divided into control group,model group,positive group and YQA14 group.After the establishment of animal models,the saline,sertraline(ig) and YQA14(ip)were administered to the animals in the control,model,positive control and test groups respectively.The open field test(OFT) was used to evaluate the locomotor activity while the contextual freezing(CF) measurement and elevated plus maze(EPM) test were used to evaluate the PTSD-like behaviors.RESULTS In the rat SPS model,neither SPS nor drug treatment affected the locomotor activity in rats.However,SPS rats showed significant PTSD-like behaviors with enhanced freezing time in CF(P<0.01) and decreased percentage of entries into open arms and time spent in open arms in EPM(P<0.05,P<0.01).Moreover,compared with the model group,the repeated administration of YQA14(3.125,6.25 and 12.5 mg·kg-1)significantly reduced the freezing time(P<0.01)and increased the percentages of entries into open arms and time spent in open arms(P<0.05).In the mouse pre-shock model,when both model groups showed significant higher freezing time compared with the respective control groups(P<0.05,P<0.01),YQA14 selectively alleviated the freezing time on WT mice(P<0.05) while had no effect on KO mice.In the EPM tests,the WT mice model group showed a significant reduction in the percentage of entries into open arms and time spent in open arms(P<0.05) while D3 R KO mice model group didn′ t show any reduction,compared with respective control groups.Furthermore,daily administration of YQA14 at 12.5 mg·kg-1 both significantly reduced the percentages of entries into and time spent in open arms(P<0.05) but not D3 R KO mice.None of the locomotor activity were significantly affected.CONCLUSION YQA14 could significantly alleviate the PTSD-like behaviors in rodents and the effects were mediated by the blockade of brain D3 receptors.

Vitamin D_(3) attenuates anxiety-like behavior in long-term ovariectomized rats with unpredictable mild stress

The impact of various vitamin D3(VD3)doses(1.0,2.5,or 5 mg/kg,s.c.)in mitigating the negative consequences of chronic unpredictable mild stress(CUMS)was investigated.Adult female rats with long-term estrogen deficiency were assessed using the sucrose preference test(SPT),the elevated plus-maze(EPM),the light/dark test(LDT),and the open-field test(OFT)to measure anhedonia-like and anxiety-like behavior.The corticosterone(CS)and adrenocorticotrophic hormone(ACTH)concentrations in blood serum and the brain-derived neurotrophic factor(BDNF)expression in the hippocampus of long-term ovariectomized(OVX)rats were measured by ELISA kits and/or western blotting.Treatment with VD3(5.0 mg/kg),similarly to fluoxetine(10.0 mg/kg),significantly reduced the anhedonia profile in the SPT and anxiety-like behavior in the EPM and LDT,and CS and ACTH levels in blood serum.It also elevated BDNF levels in the hippocampus of long-term OVX/CUMS compared to OVX/CUMS/solvent rats.Thus,these findings suggest that VD3(5.0 mg/kg)administration might attenuate the anxiety-like profile in long-term OVX adult rats subjected to the CUMS.This might occur via activation of the BDNF signaling pathway in the hippocampus and via restoration of CS and ACTH levels in blood serum.

Evolution of 3D tectonic stress field and fault movement in North China

Based on data of fault movement surveying, we simulate the evolution process of three dimensional stress field in North China by three dimensional finite element method. Evolutional patterns in one-year time scale from 1986 to 1997 have been illustrated and the evolution characteristics of stress field have been analyzed. In comparison with the seismic activity among that time interval in North China, we have primarily discussed the relationship between the evolution of stress field and seismic activity.

Determination of the full-field stress and displacement using photoelasticity and sampling moirémethod in a 3D-printed model

The quantitative characterization of the full-field stress and displacement is significant for analyzing the failure and instability of engineering materials.Various optical measurement techniques such as photoelasticity,moiréand digital image correlation methods have been developed to achieve this goal.However,these methods are difficult to incorporate to determine the stress and displacement fields simultaneously because the tested models must contain particles and grating for displacement measurement;however,these elements will disturb the light passing through the tested models using photoelasticity.In this study,by combining photoelasticity and the sampling moirémethod,we developed a method to determine the stress and displacement fields simultaneously in a three-dimensional(3D)-printed photoelastic model with orthogonal grating.Then,the full-field stress was determined by analyzing 10 photoelastic patterns,and the displacement fields were calculated using the sampling moirémethod.The results indicate that the developed method can simultaneously determine the stress and displacement fields.

Study on the trauma and stress level of the pelvic fracture treated by 3D printing combined with lateral rectus abdominis approach surgery

Objective: To study the trauma and stress level of the pelvic fracture treated by 3D printing combined with lateral rectus abdominis approach surgery. Methods: A total of 50 patients with pelvic fractures who were treated in the hospital between July 2015 and Jun 2017 were collected anddivided into control group (n=25) and observation group (n=25) by random number table method. Control group underwent lateral rectus abdominis approach surgery, and the observation group received 3D printingcombined with lateral rectus abdominis approach surgery. The differences in perioperative inflammatory response, coagulation function and stress degree were compared between the two groups. Results: 24 h before surgery, the differences in inflammatory response, coagulation function and stress degree were not statistically significant between the two groups. 24 h after surgery, serum IL-1, TNF-α, CRP, FIB, D-D, Cor, AngⅡ and NE levels of both groups of patients were higher than those 24h before surgery, and serum IL-1, TNF-α, CRP, FIB, D-D, Cor, AngⅡ and NE levels of observation group were lower than those of control group. Conclusion: 3D printing combined with lateral rectus abdominis approach surgery can effectively reduce the degree of surgical trauma and reduce the systemic stress response in patients with pelvic fracture.

基于3-D图像的植物亏水胁迫萎蔫体态辨识方法

萎蔫现象是植物亏水胁迫环境下表现出的一种生命特征。为了定量辨识植株的萎蔫体态,在应用激光扫描装置快速获取植株3-D图像基础上,定义了4种萎蔫指数,即叶面卷曲统计指数、叶片形心的高斯曲率、基于形心切平面的叶尖投影以及叶片边缘投影求和平均。实验方法将叶片萎蔫程度分为5个等级水平（LS1~LS5）,通过逐一检验每种定义的萎蔫指数是否具有单调性得出可应用性结论。实验结果表明距离投影算法满足萎蔫指数的单调要求,尤其是叶片边缘投影求和平均萎蔫指数具有更好的鲁棒性。

基于3-D数据的叶片萎蔫形态辨识方法

以西葫芦为试验对象,采用非接触式激光扫描获取植物叶片3-D形态信息,运用微分几何算法、二维傅里叶谱分析法、垂直投影叶面积法以及标准差法定义了4种植物萎蔫指数(TB_3D、RLWI-2DFT、RTPLA和RSD)用来定量刻画植物萎蔫状态。试验结果表明萎蔫指数能够很好地定量刻画植物萎蔫形态。其中TB_3D与太阳全辐射量、大气温度线性相关,决定系数取值范围分别为[0.710,0.721]和[0.513,0.589]。TB_3D与茎秆直径线性相关,决定系数为0.845。最后通过比较4种萎蔫指数刻画萎蔫状态的相关性,两两间决定系数大于0.736,结果表明4种指数的萎蔫表征效果基本一致。

槲皮素-3-O-β-D-葡萄糖醛酸苷对游离脂肪酸诱导HepG2细胞脂肪变性的作用

探讨槲皮素-3-O-β-D-葡萄糖醛酸苷(quercetin-3-O-β-D-glucuronide,Q3GA)对游离脂肪酸诱导的人源肝癌细胞HepG2细胞脂质蓄积的甘油三酯调节和氧化应激的作用及其可能的相关机制。采用油红染色检测Q3GA对游离脂肪酸诱导的HepG2细胞中脂滴含量的影响,并同时检测其对甘油三酯和胆固醇的作用。DCFH-DA法检测Q3GA对HepG2细胞脂质蓄积引起的活性氧(ROS)的变化;硫代巴比妥酸法和黄嘌呤氧化酶法分别测定丙二醛(MDA)的含量和超氧化物歧化酶(SOD)的活性。RT-PCR分析脂肪酸氧化相关的基因过氧化物酶体增殖物受体(PPARα)、肉毒碱棕榈酰转移酶(CPT1A)、中链酰基辅酶A脱氢酶(MCAD)、细胞色素P450 4A11(CYP4A11)、乙酰辅酶A氧化酶(ACO)的表达情况。实验结果显示,Q3GA可剂量依赖性降低FFA诱导的Hep G2细胞脂质蓄积和甘油三酯的含量,但未降低胆固醇的含量。同时可改善脂肪酸氧化引起ROS,MDA的升高以及SOD的降低。另外,Q3GA在一定浓度下可上调脂肪酸β氧化相关基因PPARα、CPT1A、MCAD的表达,而对CYP4A11和ACO的表达没有促进作用。综上所述,Q3GA可抵抗脂肪酸氧化引发肝细胞的氧化应激损伤,保护HepG2细胞,降低游离脂肪酸诱导HepG2细胞脂质蓄积和甘油三酯的含量,其调节机制可能与其对HepG2细胞中游离脂肪酸氧化有关。