In current research, a series of triaxial tests, which were employed to simulate three typical mining lay-outs (i.e., top-coal caving, non-pillar mining and protected coal seam mining), were conducted on coal by using...In current research, a series of triaxial tests, which were employed to simulate three typical mining lay-outs (i.e., top-coal caving, non-pillar mining and protected coal seam mining), were conducted on coal by using MTS815 Flex Test GT rock mechanics test system, and the fracture networks in the broken coal samples were qualitatively and quantitatively investigated by employing CT scanning and 3D reconstruc-tion techniques. This work aimed at providing a detail description on the micro-structure and fracture-connectivity characteristics of rupture coal samples under different mining layouts. The results show that: (i) for protected coal seam mining layout, the coal specimens failure is in a compression-shear manner and oppositely, (ii) the tension-shear failure phenomenon is observed for top-coal caving and non-pillar mining layouts. By investigating the connectivity features of the generated fractures in the direction of r1 under different mining layouts, it is found that the connectivity level of the fractures of the samples corresponding to non-pillar mining layout was the highest.展开更多
The Development of 3D CAD technology presents a new effective tool in designing outdoor switch yard for power plant. A new layout pattern of 330 kV switch yard (SWYD) of aligned type was studied with this method. Some...The Development of 3D CAD technology presents a new effective tool in designing outdoor switch yard for power plant. A new layout pattern of 330 kV switch yard (SWYD) of aligned type was studied with this method. Some issues about computerized 3D modes applied in SWYD design are also discussed in this paper.展开更多
Some key issues in supporting collaborative design in product data management（PDM ） system and 3D computer aided design（CAD） system integrated environment are analyzed. The general architecture of the integrated e...Some key issues in supporting collaborative design in product data management（PDM ） system and 3D computer aided design（CAD） system integrated environment are analyzed. The general architecture of the integrated environment is divided into five tiers and employs the transparently integrated mode, with the mode, function calling and information exchanging among independent PDM and CAD processes are carried out via message translation /parse approach. Product layout feature（PLF ） model definition is presented, PLF model is used to represent design intention at the preliminary design phase. The collaborative design methodology employing the PLF model in PDM/3D CAD integrated environment is analyzed. The design methodology can speed up the design process, reduce the investment and improve the product quality.展开更多
基金financially supported by the Major State Fundamental Research Project of China(Nos.2011CB201201and2010CB226802)the National Natural Science Foundation of China(No.51204113)the Youth Science and Technology Fund of Sichuan Province(No.2012JQ0031)
文摘In current research, a series of triaxial tests, which were employed to simulate three typical mining lay-outs (i.e., top-coal caving, non-pillar mining and protected coal seam mining), were conducted on coal by using MTS815 Flex Test GT rock mechanics test system, and the fracture networks in the broken coal samples were qualitatively and quantitatively investigated by employing CT scanning and 3D reconstruc-tion techniques. This work aimed at providing a detail description on the micro-structure and fracture-connectivity characteristics of rupture coal samples under different mining layouts. The results show that: (i) for protected coal seam mining layout, the coal specimens failure is in a compression-shear manner and oppositely, (ii) the tension-shear failure phenomenon is observed for top-coal caving and non-pillar mining layouts. By investigating the connectivity features of the generated fractures in the direction of r1 under different mining layouts, it is found that the connectivity level of the fractures of the samples corresponding to non-pillar mining layout was the highest.
文摘The Development of 3D CAD technology presents a new effective tool in designing outdoor switch yard for power plant. A new layout pattern of 330 kV switch yard (SWYD) of aligned type was studied with this method. Some issues about computerized 3D modes applied in SWYD design are also discussed in this paper.
基金Supported by the National High Technology Re-search and Development Programof China(2003AA411011)
文摘Some key issues in supporting collaborative design in product data management（PDM ） system and 3D computer aided design（CAD） system integrated environment are analyzed. The general architecture of the integrated environment is divided into five tiers and employs the transparently integrated mode, with the mode, function calling and information exchanging among independent PDM and CAD processes are carried out via message translation /parse approach. Product layout feature（PLF ） model definition is presented, PLF model is used to represent design intention at the preliminary design phase. The collaborative design methodology employing the PLF model in PDM/3D CAD integrated environment is analyzed. The design methodology can speed up the design process, reduce the investment and improve the product quality.
