The hot deformation and dynamic recrystallization(DRX)behaviors of 7055 aluminum alloy were studied at temperatures of 390−470℃ and strain rates of 0.01−1 s^(−1).A low DRX fraction between 1% and 13% was observed by ...The hot deformation and dynamic recrystallization(DRX)behaviors of 7055 aluminum alloy were studied at temperatures of 390−470℃ and strain rates of 0.01−1 s^(−1).A low DRX fraction between 1% and 13% was observed by using EBSD technique.A modified JMAK-type DRX model was proposed for such low DRX fraction problems.The model was used together with commercial FEM software DEFORM-3D to simulate the hot compression of 7055 aluminum alloy.There was a good agreement between experimental and predicted DRX fractions and grain size with an average absolute relative error(AARE)of 13.7% and 6.3%,respectively.In order to further verify the validity of the proposed model,the model was also used to simulate DRX in industrial hot rolling of 7055 aluminum alloys.The results showed that the distribution of DRX fraction was inhomogeneous,and agreed with experimental observations.展开更多
As the pump turbine tends to be operated with high head and high rotational speed, the study of stability problems becomes more important. The pump turbine usually works at operating conditions where the guide vanes e...As the pump turbine tends to be operated with high head and high rotational speed, the study of stability problems becomes more important. The pump turbine usually works at operating conditions where the guide vanes experience strong vibrations. However, most traditional studies were carried out based on constant GVO(guide vane opening) simulations. In this work, dynamic analysis on pressure fluctuation in the vaneless region of a pump turbine model was conducted using a dynamic mesh method in turbine mode. 3D unsteady simulations were conducted where GVO was closed and opened by 1° from the initial 18°. Detailed time domain and frequency domain characteristics on pressure fluctuation in the vaneless region under different guide vane rotational states compared with constant GVO simulations were investigated. Results show that, during the guide vanes oscillating process, the low and intermediate frequency components in the vaneless region are significantly different. The amplitudes of pressure fluctuation are higher than those with constant GVO simulations, which agree better with the experimental data. In addition, the pressure fluctuation increases when GVO is opened, and vice versa. It can be concluded that pressure fluctuation in the vaneless region is strongly influenced by the oscillating of the guide vanes.展开更多
基金the financial supports from the National Key Research and Development Program of China(No.2016YFB-0300901)the National Natural Science Foundation of China(No.51871033)+1 种基金the Chongqing Research Program of Basic Research and Frontier Technology,China(No.cstc2017jcyjAX0245)the Venture&Innovation Support Program for Chongqing Overseas Returnees,China(No.cx2018002).
文摘The hot deformation and dynamic recrystallization(DRX)behaviors of 7055 aluminum alloy were studied at temperatures of 390−470℃ and strain rates of 0.01−1 s^(−1).A low DRX fraction between 1% and 13% was observed by using EBSD technique.A modified JMAK-type DRX model was proposed for such low DRX fraction problems.The model was used together with commercial FEM software DEFORM-3D to simulate the hot compression of 7055 aluminum alloy.There was a good agreement between experimental and predicted DRX fractions and grain size with an average absolute relative error(AARE)of 13.7% and 6.3%,respectively.In order to further verify the validity of the proposed model,the model was also used to simulate DRX in industrial hot rolling of 7055 aluminum alloys.The results showed that the distribution of DRX fraction was inhomogeneous,and agreed with experimental observations.
基金supported by the National Key Technology R&G Program(Project No.2012BAF03B01-X)Foundation for Innovative Research Groups of the National Natural Science Foundation of China(Grant No.51121004)
文摘As the pump turbine tends to be operated with high head and high rotational speed, the study of stability problems becomes more important. The pump turbine usually works at operating conditions where the guide vanes experience strong vibrations. However, most traditional studies were carried out based on constant GVO(guide vane opening) simulations. In this work, dynamic analysis on pressure fluctuation in the vaneless region of a pump turbine model was conducted using a dynamic mesh method in turbine mode. 3D unsteady simulations were conducted where GVO was closed and opened by 1° from the initial 18°. Detailed time domain and frequency domain characteristics on pressure fluctuation in the vaneless region under different guide vane rotational states compared with constant GVO simulations were investigated. Results show that, during the guide vanes oscillating process, the low and intermediate frequency components in the vaneless region are significantly different. The amplitudes of pressure fluctuation are higher than those with constant GVO simulations, which agree better with the experimental data. In addition, the pressure fluctuation increases when GVO is opened, and vice versa. It can be concluded that pressure fluctuation in the vaneless region is strongly influenced by the oscillating of the guide vanes.
