To solve the problems in restoring sedimentary facies and predicting reservoirs in loose gas-bearing sediment,based on seismic sedimentologic analysis of the first 9-component S-wave 3D seismic dataset of China,a four...To solve the problems in restoring sedimentary facies and predicting reservoirs in loose gas-bearing sediment,based on seismic sedimentologic analysis of the first 9-component S-wave 3D seismic dataset of China,a fourth-order isochronous stratigraphic framework was set up and then sedimentary facies and reservoirs in the Pleistocene Qigequan Formation in Taidong area of Qaidam Basin were studied by seismic geomorphology and seismic lithology.The study method and thought are as following.Firstly,techniques of phase rotation,frequency decomposition and fusion,and stratal slicing were applied to the 9-component S-wave seismic data to restore sedimentary facies of major marker beds based on sedimentary models reflected by satellite images.Then,techniques of seismic attribute extraction,principal component analysis,and random fitting were applied to calculate the reservoir thickness and physical parameters of a key sandbody,and the results are satisfactory and confirmed by blind testing wells.Study results reveal that the dominant sedimentary facies in the Qigequan Formation within the study area are delta front and shallow lake.The RGB fused slices indicate that there are two cycles with three sets of underwater distributary channel systems in one period.Among them,sandstones in the distributary channels of middle-low Qigequan Formation are thick and broad with superior physical properties,which are favorable reservoirs.The reservoir permeability is also affected by diagenesis.Distributary channel sandstone reservoirs extend further to the west of Sebei-1 gas field,which provides a basis to expand exploration to the western peripheral area.展开更多
This paper presents a new approach for attenuating coherent noise in 3D seismic data. An adaptive beamforming with generalized sidelobe canceller (GSC) design methodology is utilized here as a general form of linearly...This paper presents a new approach for attenuating coherent noise in 3D seismic data. An adaptive beamforming with generalized sidelobe canceller (GSC) design methodology is utilized here as a general form of linearly constrained adaptive beamforming structure. It consists of a fixed beamformer, and a signal-blocking matrix in front of an unconstrained adaptive beamformer.Considerationf of the complexity of the geometry for 3D seismic survey, the 3D beamforming with GSC technique is developed with two key points: (1) sorting along azimuth sections to simplify the relationship between traveltime and offset from 3D to 2D, and (2) dynamic binning scheme to avoid the possible poor folding in some azimuth sections. Both simulation result and real data example show that the newly developed 3D beamforming with GSC yields more credible results at a relative low cost, sufficient stability and good resolution.展开更多
Seismic inversion is one of the most important methods for lithological prospecting . Seismic data with lowresolution is converted into impedance data of high resolution which can reflect the geological structure by i...Seismic inversion is one of the most important methods for lithological prospecting . Seismic data with lowresolution is converted into impedance data of high resolution which can reflect the geological structure by inversionThe inversion technique of 3D seismic data is discussed from both methodological and theoretical aspects, and the in-version test is also carried out using actual logging data. The result is identical with the measured data obtained fromroadway of coal mine. The field tests and research results indicate that this method can provide more accurate data foridentifying thin coal seam and minor faults.展开更多
3D visualization technology is a tool used for displaying, describing, and understanding the characteristics of geologic bodies, and features high efficiency, objective accuracy, visual expression, etc. In this paper,...3D visualization technology is a tool used for displaying, describing, and understanding the characteristics of geologic bodies, and features high efficiency, objective accuracy, visual expression, etc. In this paper, the man-machine interactive interpretation and 3D visualization technology rapidly displaying and analyzing the 3D seismic data of hydrate ore volume is researched and developed using the hybrid rendering technique. Through the integrated interpretation on the 3D space structure, stratum, and seismic attributes, the visualized multi-attribute superimposition analysis is implemented for describing the spatial distribution characteristics of hydrate ore volume and exquisitely describing the subtle geological characteristics of hydrate ore volume. By the hybrid rendering technique, authentication and interpretation are provided for the geological exploration work, so as to greatly enhance the visualization and accuracy of the geological analysis, and also provide a good decision-making foundation for the subsequent development of resources.展开更多
This work analyzes the photometric data of the Oort spike comets C/2019 L3(ATLAS)and C/2019 O3(Palomar)obtained between 2016 and 2023 by the ATLAS network and the Belgian Olmen Observatory.The comets Palomar and ATLAS...This work analyzes the photometric data of the Oort spike comets C/2019 L3(ATLAS)and C/2019 O3(Palomar)obtained between 2016 and 2023 by the ATLAS network and the Belgian Olmen Observatory.The comets Palomar and ATLAS have a typical and unusually high activity level,respectively,based on the Afρparameter corrected to phase angle zero at perihelion.The absolute magnitude of comets ATLAS and Palomar in the o-band is 4.71±0.05 and 4.16±0.02 respectively.The cometary activity of comets ATLAS and Palomar probably began at r>13 au before perihelion and will end at r>14 au after perihelion,which means that they could remain active until the second half of 2026.The nucleus of comet ATLAS has a minimum radius of 7.9 km,and the nucleus of comet Palomar could be a little larger.The c-o colors of the comets ATLAS and Palomar are redder and bluer,respectively,at perihelion than the solar twin YBP 1194.These comets showed a bluish trend in the coma color with decreasing heliocentric distance.Comet Palomar probably had two outbursts after its perihelion,each releasing about 10^(8)kg of dust.The slopes of the photometric profile of the comae of these comets were between 1and 1.5,indicating a steady state during the observation campaign.展开更多
In order to evaluate the impact of assimilating FY-3C satellite Microwave Humidity Sounder(MWHS2)data on rainfall forecasts in the new-generation Rapid-refresh Multi-scale Analysis and Prediction System–Short Term(RM...In order to evaluate the impact of assimilating FY-3C satellite Microwave Humidity Sounder(MWHS2)data on rainfall forecasts in the new-generation Rapid-refresh Multi-scale Analysis and Prediction System–Short Term(RMAPS-ST)operational system,which is developed by the Institute of Urban Meteorology of the China Meteorological Administration,four experiments were carried out in this study:(i)Coldstart(no observations assimilated);(ii)CON(assimilation of conventional observations);(iii)FY3(assimilation of FY-3C MWHS2 only);and(iv)FY3+CON(simultaneous assimilation of FY-3C MWHS2 and conventional observations).A precipitation process that took place in central-eastern China during 4–6 June 2019 was selected as a case study.When the authors assimilated the FY-3C MWHS2 data in the RMAPS-ST operational system,data quality control and bias correction were performed so that the O-B(observation minus background)values of the five humidity channels of MWHS2 became closer to a normal distribution,and the data basically satisfied the unbiased assumption.The results showed that,in this case,the predictions of both precipitation location and intensity were improved in the FY3+CON experiment compared with the other three experiments.Meanwhile,the prediction of atmospheric parameters for the mesoscale field was also improved,and the RMSE of the specific humidity forecast at the 850–400 hPa height was reduced.This study implies that FY-3C MWHS2 data can be successfully assimilated in a regional numerical model and has the potential to improve the forecasting of rainfall.展开更多
3D seismic prospecting in mining areas of Xieqiao Colliery is a successfulmodel for an advancement from the resource prospecting to mining prospecting stagein coal fields. Its results have proved that faults with a th...3D seismic prospecting in mining areas of Xieqiao Colliery is a successfulmodel for an advancement from the resource prospecting to mining prospecting stagein coal fields. Its results have proved that faults with a throw of 5-10 m can be detected in an area with good seismogeologic conditions by using 3D seismic technique.Detection of underground tunnels for the first time utilizing 3D seismic data indicates that subsided columns, gotten and mine goaf can be detected using 3D seismic technique, so it has a broad applied prospect.展开更多
基金Supported by the CNPC Science and Technology Projects(2022-N/G-47808,2023-N/G-67014)RIPED International Cooperation Project(19HTY5000008).
文摘To solve the problems in restoring sedimentary facies and predicting reservoirs in loose gas-bearing sediment,based on seismic sedimentologic analysis of the first 9-component S-wave 3D seismic dataset of China,a fourth-order isochronous stratigraphic framework was set up and then sedimentary facies and reservoirs in the Pleistocene Qigequan Formation in Taidong area of Qaidam Basin were studied by seismic geomorphology and seismic lithology.The study method and thought are as following.Firstly,techniques of phase rotation,frequency decomposition and fusion,and stratal slicing were applied to the 9-component S-wave seismic data to restore sedimentary facies of major marker beds based on sedimentary models reflected by satellite images.Then,techniques of seismic attribute extraction,principal component analysis,and random fitting were applied to calculate the reservoir thickness and physical parameters of a key sandbody,and the results are satisfactory and confirmed by blind testing wells.Study results reveal that the dominant sedimentary facies in the Qigequan Formation within the study area are delta front and shallow lake.The RGB fused slices indicate that there are two cycles with three sets of underwater distributary channel systems in one period.Among them,sandstones in the distributary channels of middle-low Qigequan Formation are thick and broad with superior physical properties,which are favorable reservoirs.The reservoir permeability is also affected by diagenesis.Distributary channel sandstone reservoirs extend further to the west of Sebei-1 gas field,which provides a basis to expand exploration to the western peripheral area.
基金This research is sponsored by by China Natural Science Foundation (40274041), China National Petroleum Corporation (CNPC)Innovation Fund (2002CXKF-3)
文摘This paper presents a new approach for attenuating coherent noise in 3D seismic data. An adaptive beamforming with generalized sidelobe canceller (GSC) design methodology is utilized here as a general form of linearly constrained adaptive beamforming structure. It consists of a fixed beamformer, and a signal-blocking matrix in front of an unconstrained adaptive beamformer.Considerationf of the complexity of the geometry for 3D seismic survey, the 3D beamforming with GSC technique is developed with two key points: (1) sorting along azimuth sections to simplify the relationship between traveltime and offset from 3D to 2D, and (2) dynamic binning scheme to avoid the possible poor folding in some azimuth sections. Both simulation result and real data example show that the newly developed 3D beamforming with GSC yields more credible results at a relative low cost, sufficient stability and good resolution.
文摘Seismic inversion is one of the most important methods for lithological prospecting . Seismic data with lowresolution is converted into impedance data of high resolution which can reflect the geological structure by inversionThe inversion technique of 3D seismic data is discussed from both methodological and theoretical aspects, and the in-version test is also carried out using actual logging data. The result is identical with the measured data obtained fromroadway of coal mine. The field tests and research results indicate that this method can provide more accurate data foridentifying thin coal seam and minor faults.
文摘3D visualization technology is a tool used for displaying, describing, and understanding the characteristics of geologic bodies, and features high efficiency, objective accuracy, visual expression, etc. In this paper, the man-machine interactive interpretation and 3D visualization technology rapidly displaying and analyzing the 3D seismic data of hydrate ore volume is researched and developed using the hybrid rendering technique. Through the integrated interpretation on the 3D space structure, stratum, and seismic attributes, the visualized multi-attribute superimposition analysis is implemented for describing the spatial distribution characteristics of hydrate ore volume and exquisitely describing the subtle geological characteristics of hydrate ore volume. By the hybrid rendering technique, authentication and interpretation are provided for the geological exploration work, so as to greatly enhance the visualization and accuracy of the geological analysis, and also provide a good decision-making foundation for the subsequent development of resources.
基金The ATLAS project is primarily funded to search for near-earth asteroids through NASA grants NN12AR55G,80NSSC18K0284,and 80NSSC18K1575funded by Kepler/K2 grant J1944/80NSSC19K0112 and HST GO-15889,and STFC grants ST/T000198/1 and ST/S006109/1。
文摘This work analyzes the photometric data of the Oort spike comets C/2019 L3(ATLAS)and C/2019 O3(Palomar)obtained between 2016 and 2023 by the ATLAS network and the Belgian Olmen Observatory.The comets Palomar and ATLAS have a typical and unusually high activity level,respectively,based on the Afρparameter corrected to phase angle zero at perihelion.The absolute magnitude of comets ATLAS and Palomar in the o-band is 4.71±0.05 and 4.16±0.02 respectively.The cometary activity of comets ATLAS and Palomar probably began at r>13 au before perihelion and will end at r>14 au after perihelion,which means that they could remain active until the second half of 2026.The nucleus of comet ATLAS has a minimum radius of 7.9 km,and the nucleus of comet Palomar could be a little larger.The c-o colors of the comets ATLAS and Palomar are redder and bluer,respectively,at perihelion than the solar twin YBP 1194.These comets showed a bluish trend in the coma color with decreasing heliocentric distance.Comet Palomar probably had two outbursts after its perihelion,each releasing about 10^(8)kg of dust.The slopes of the photometric profile of the comae of these comets were between 1and 1.5,indicating a steady state during the observation campaign.
基金Supported by the Second Tibetan Plateau Scientific Expedition and Research(STEP)program(grant no.2019QZKK0105)the National Key Research and Development Program of China(2018YFC1506603).
文摘In order to evaluate the impact of assimilating FY-3C satellite Microwave Humidity Sounder(MWHS2)data on rainfall forecasts in the new-generation Rapid-refresh Multi-scale Analysis and Prediction System–Short Term(RMAPS-ST)operational system,which is developed by the Institute of Urban Meteorology of the China Meteorological Administration,four experiments were carried out in this study:(i)Coldstart(no observations assimilated);(ii)CON(assimilation of conventional observations);(iii)FY3(assimilation of FY-3C MWHS2 only);and(iv)FY3+CON(simultaneous assimilation of FY-3C MWHS2 and conventional observations).A precipitation process that took place in central-eastern China during 4–6 June 2019 was selected as a case study.When the authors assimilated the FY-3C MWHS2 data in the RMAPS-ST operational system,data quality control and bias correction were performed so that the O-B(observation minus background)values of the five humidity channels of MWHS2 became closer to a normal distribution,and the data basically satisfied the unbiased assumption.The results showed that,in this case,the predictions of both precipitation location and intensity were improved in the FY3+CON experiment compared with the other three experiments.Meanwhile,the prediction of atmospheric parameters for the mesoscale field was also improved,and the RMSE of the specific humidity forecast at the 850–400 hPa height was reduced.This study implies that FY-3C MWHS2 data can be successfully assimilated in a regional numerical model and has the potential to improve the forecasting of rainfall.
文摘3D seismic prospecting in mining areas of Xieqiao Colliery is a successfulmodel for an advancement from the resource prospecting to mining prospecting stagein coal fields. Its results have proved that faults with a throw of 5-10 m can be detected in an area with good seismogeologic conditions by using 3D seismic technique.Detection of underground tunnels for the first time utilizing 3D seismic data indicates that subsided columns, gotten and mine goaf can be detected using 3D seismic technique, so it has a broad applied prospect.
